[media] dt-bindings: mediatek: Add a binding for Mediatek JPEG Decoder

Add a DT binding documentation for Mediatek JPEG Decoder of
MT2701 SoC.
Signed-off-by: NRick Chang <rick.chang@mediatek.com>
Signed-off-by: NMinghsiu Tsai <minghsiu.tsai@mediatek.com>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>

Documentation/devicetree/bindings/media/mediatek-jpeg-decoder.txt

+* Mediatek JPEG Decoder
+
+Mediatek JPEG Decoder is the JPEG decode hardware present in Mediatek SoCs
+
+Required properties:
+- compatible : must be one of the following string:
+	"mediatek,mt8173-jpgdec"
+	"mediatek,mt2701-jpgdec"
+- reg : physical base address of the jpeg decoder registers and length of
+  memory mapped region.
+- interrupts : interrupt number to the interrupt controller.
+- clocks: device clocks, see
+  Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- clock-names: must contain "jpgdec-smi" and "jpgdec".
+- power-domains: a phandle to the power domain, see
+  Documentation/devicetree/bindings/power/power_domain.txt for details.
+- mediatek,larb: must contain the local arbiters in the current Socs, see
+  Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.txt
+  for details.
+- iommus: should point to the respective IOMMU block with master port as
+  argument, see Documentation/devicetree/bindings/iommu/mediatek,iommu.txt
+  for details.
+
+Example:
+	jpegdec: jpegdec@15004000 {
+		compatible = "mediatek,mt2701-jpgdec";
+		reg = <0 0x15004000 0 0x1000>;
+		interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_LOW>;
+		clocks =  <&imgsys CLK_IMG_JPGDEC_SMI>,
+			  <&imgsys CLK_IMG_JPGDEC>;
+		clock-names = "jpgdec-smi",
+			      "jpgdec";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_ISP>;
+		mediatek,larb = <&larb2>;
+		iommus = <&iommu MT2701_M4U_PORT_JPGDEC_WDMA>,
+			 <&iommu MT2701_M4U_PORT_JPGDEC_BSDMA>;
+	};