serial: fsl_lpuart: RS485 RTS polariy is inverse

The setting of RS485 RTS polarity is inverse in the current driver.

When the property of 'rs485-rts-active-low' is enabled in the dts node,
the RTS signal should be LOW during sending. Otherwise, if there is no
such a property, the RTS should be HIGH during sending.

Fixes: 03895cf4 ("tty: serial: fsl_lpuart: Add support for RS-485")
Cc: stable <stable@kernel.org>
Signed-off-by: NNicolas Diaz <nicolas.diaz@nxp.com>
Signed-off-by: NShenwei Wang <shenwei.wang@nxp.com>
Link: https://lore.kernel.org/r/20220805144529.604856-1-shenwei.wang@nxp.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/fsl_lpuart.c

@@ -1394,9 +1394,9 @@ static int lpuart_config_rs485(struct uart_port *port, struct ktermios *termios,
 		 * Note: UART is assumed to be active high.
 		 */
 		if (rs485->flags & SER_RS485_RTS_ON_SEND)
-			modem &= ~UARTMODEM_TXRTSPOL;
-		else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
 			modem |= UARTMODEM_TXRTSPOL;
+		else if (rs485->flags & SER_RS485_RTS_AFTER_SEND)
+			modem &= ~UARTMODEM_TXRTSPOL;
 	}
 
 	writeb(modem, sport->port.membase + UARTMODEM);