提交 8459c159 编写于 作者: D Dirk Opfer 提交者: Russell King

[ARM] 3088/1: PXA: Add machine support for the Sharp SL-6000x series of PDAs

Patch from Dirk Opfer

This patch adds basic machine support for the Sharp SL-6000x (Tosa) PDAs.

Signed-off-by: Dirk Opfer
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 20faa7c3
......@@ -297,6 +297,11 @@ P: Richard Purdie
M: rpurdie@rpsys.net
S: Maintained
ARM/TOSA MACHINE SUPPORT
P: Dirk Opfer
M: dirk@opfer-online.de
S: Maintained
ARM/PLEB SUPPORT
P: Peter Chubb
M: pleb@gelato.unsw.edu.au
......
......@@ -27,7 +27,8 @@ config PXA_SHARPSL
Say Y here if you intend to run this kernel on a
Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
SL-C3000 (Spitz) or SL-C3100 (Borzoi) handheld computer.
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
handheld computer.
endchoice
......@@ -37,7 +38,7 @@ choice
prompt "Select target Sharp Zaurus device range"
config PXA_SHARPSL_25x
bool "Sharp PXA25x models (SL-5600 and SL-C7xx)"
bool "Sharp PXA25x models (SL-5600, SL-C7xx and SL-C6000x)"
select PXA25x
config PXA_SHARPSL_27x
......@@ -80,6 +81,10 @@ config MACH_BORZOI
depends PXA_SHARPSL_27x
select PXA_SHARP_Cxx00
config MACH_TOSA
bool "Enable Sharp SL-6000x (Tosa) Support"
depends PXA_SHARPSL
config PXA25x
bool
help
......
......@@ -14,6 +14,7 @@ obj-$(CONFIG_ARCH_PXA_IDP) += idp.o
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o corgi_ssp.o corgi_lcd.o ssp.o
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o corgi_ssp.o corgi_lcd.o ssp.o
obj-$(CONFIG_MACH_POODLE) += poodle.o
obj-$(CONFIG_MACH_TOSA) += tosa.o
# Support for blinky lights
led-y := leds.o
......
/*
* Support for Sharp SL-C6000x PDAs
* Model: (Tosa)
*
* Copyright (c) 2005 Dirk Opfer
*
* Based on code written by Sharp/Lineo for 2.4 kernels
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
#include <linux/mmc/host.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/irq.h>
#include <asm/arch/tosa.h>
#include <asm/hardware/scoop.h>
#include <asm/mach/sharpsl_param.h>
#include "generic.h"
/*
* SCOOP Device
*/
static struct resource tosa_scoop_resources[] = {
[0] = {
.start = TOSA_CF_PHYS,
.end = TOSA_CF_PHYS + 0xfff,
.flags = IORESOURCE_MEM,
},
};
static struct scoop_config tosa_scoop_setup = {
.io_dir = TOSA_SCOOP_IO_DIR,
.io_out = TOSA_SCOOP_IO_OUT,
};
struct platform_device tosascoop_device = {
.name = "sharp-scoop",
.id = 0,
.dev = {
.platform_data = &tosa_scoop_setup,
},
.num_resources = ARRAY_SIZE(tosa_scoop_resources),
.resource = tosa_scoop_resources,
};
/*
* SCOOP Device Jacket
*/
static struct resource tosa_scoop_jc_resources[] = {
[0] = {
.start = TOSA_SCOOP_PHYS + 0x40,
.end = TOSA_SCOOP_PHYS + 0xfff,
.flags = IORESOURCE_MEM,
},
};
static struct scoop_config tosa_scoop_jc_setup = {
.io_dir = TOSA_SCOOP_JC_IO_DIR,
.io_out = TOSA_SCOOP_JC_IO_OUT,
};
struct platform_device tosascoop_jc_device = {
.name = "sharp-scoop",
.id = 1,
.dev = {
.platform_data = &tosa_scoop_jc_setup,
.parent = &tosascoop_device.dev,
},
.num_resources = ARRAY_SIZE(tosa_scoop_jc_resources),
.resource = tosa_scoop_jc_resources,
};
static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
{
.dev = &tosascoop_device.dev,
.irq = TOSA_IRQ_GPIO_CF_IRQ,
.cd_irq = TOSA_IRQ_GPIO_CF_CD,
.cd_irq_str = "PCMCIA0 CD",
},{
.dev = &tosascoop_jc_device.dev,
.irq = TOSA_IRQ_GPIO_JC_CF_IRQ,
.cd_irq = -1,
},
};
static struct platform_device *devices[] __initdata = {
&tosascoop_device,
&tosascoop_jc_device,
};
static void __init tosa_init(void)
{
pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_IN);
pxa_gpio_mode(TOSA_GPIO_TC6393_INT | GPIO_IN);
/* setup sleep mode values */
PWER = 0x00000002;
PFER = 0x00000000;
PRER = 0x00000002;
PGSR0 = 0x00000000;
PGSR1 = 0x00FF0002;
PGSR2 = 0x00014000;
PCFR |= PCFR_OPDE;
// enable batt_fault
PMCR = 0x01;
platform_add_devices(devices, ARRAY_SIZE(devices));
scoop_num = 2;
scoop_devs = &tosa_pcmcia_scoop[0];
}
static void __init fixup_tosa(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
sharpsl_save_param();
mi->nr_banks=1;
mi->bank[0].start = 0xa0000000;
mi->bank[0].node = 0;
mi->bank[0].size = (64*1024*1024);
}
MACHINE_START(TOSA, "SHARP Tosa")
.phys_ram = 0xa0000000,
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_tosa,
.map_io = pxa_map_io,
.init_irq = pxa_init_irq,
.init_machine = tosa_init,
.timer = &pxa_timer,
MACHINE_END
/*
* Hardware specific definitions for Sharp SL-C6000x series of PDAs
*
* Copyright (c) 2005 Dirk Opfer
*
* Based on Sharp's 2.4 kernel patches
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef _ASM_ARCH_TOSA_H_
#define _ASM_ARCH_TOSA_H_ 1
/* TOSA Chip selects */
#define TOSA_LCDC_PHYS PXA_CS4_PHYS
/* Internel Scoop */
#define TOSA_CF_PHYS (PXA_CS2_PHYS + 0x00800000)
/* Jacket Scoop */
#define TOSA_SCOOP_PHYS (PXA_CS5_PHYS + 0x00800000)
/*
* SCOOP2 internal GPIOs
*/
#define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11
#define TOSA_SCOOP_TC6393_REST_IN SCOOP_GPCR_PA12
#define TOSA_SCOOP_IR_POWERDWN SCOOP_GPCR_PA13
#define TOSA_SCOOP_SD_WP SCOOP_GPCR_PA14
#define TOSA_SCOOP_PWR_ON SCOOP_GPCR_PA15
#define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16
#define TOSA_SCOOP_BT_RESET SCOOP_GPCR_PA17
#define TOSA_SCOOP_BT_PWR_EN SCOOP_GPCR_PA18
#define TOSA_SCOOP_AC_IN_OL SCOOP_GPCR_PA19
/* GPIO Direction 1 : output mode / 0:input mode */
#define TOSA_SCOOP_IO_DIR ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \
TOSA_SCOOP_IR_POWERDWN | TOSA_SCOOP_PWR_ON | TOSA_SCOOP_AUD_PWR_ON |\
TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN )
/* GPIO out put level when init 1: Hi */
#define TOSA_SCOOP_IO_OUT ( TOSA_SCOOP_TC6393_REST_IN )
/*
* SCOOP2 jacket GPIOs
*/
#define TOSA_SCOOP_JC_BT_LED SCOOP_GPCR_PA11
#define TOSA_SCOOP_JC_NOTE_LED SCOOP_GPCR_PA12
#define TOSA_SCOOP_JC_CHRG_ERR_LED SCOOP_GPCR_PA13
#define TOSA_SCOOP_JC_USB_PULLUP SCOOP_GPCR_PA14
#define TOSA_SCOOP_JC_TC6393_SUSPEND SCOOP_GPCR_PA15
#define TOSA_SCOOP_JC_TC3693_L3V_ON SCOOP_GPCR_PA16
#define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17
#define TOSA_SCOOP_JC_WLAN_LED SCOOP_GPCR_PA18
#define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19
/* GPIO Direction 1 : output mode / 0:input mode */
#define TOSA_SCOOP_JC_IO_DIR ( TOSA_SCOOP_JC_BT_LED | TOSA_SCOOP_JC_NOTE_LED | \
TOSA_SCOOP_JC_CHRG_ERR_LED | TOSA_SCOOP_JC_USB_PULLUP | \
TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \
TOSA_SCOOP_JC_WLAN_LED | TOSA_SCOOP_JC_CARD_LIMIT_SEL )
/* GPIO out put level when init 1: Hi */
#define TOSA_SCOOP_JC_IO_OUT ( 0 )
/*
* Timing Generator
*/
#define TG_PNLCTL 0x00
#define TG_TPOSCTL 0x01
#define TG_DUTYCTL 0x02
#define TG_GPOSR 0x03
#define TG_GPODR1 0x04
#define TG_GPODR2 0x05
#define TG_PINICTL 0x06
#define TG_HPOSCTL 0x07
/*
* LED
*/
#define TOSA_SCOOP_LED_BLUE TOSA_SCOOP_GPCR_PA11
#define TOSA_SCOOP_LED_GREEN TOSA_SCOOP_GPCR_PA12
#define TOSA_SCOOP_LED_ORANGE TOSA_SCOOP_GPCR_PA13
#define TOSA_SCOOP_LED_WLAN TOSA_SCOOP_GPCR_PA18
/*
* PXA GPIOs
*/
#define TOSA_GPIO_POWERON (0)
#define TOSA_GPIO_RESET (1)
#define TOSA_GPIO_AC_IN (2)
#define TOSA_GPIO_RECORD_BTN (3)
#define TOSA_GPIO_SYNC (4) /* Cradle SYNC Button */
#define TOSA_GPIO_USB_IN (5)
#define TOSA_GPIO_JACKET_DETECT (7)
#define TOSA_GPIO_nSD_DETECT (9)
#define TOSA_GPIO_nSD_INT (10)
#define TOSA_GPIO_TC6393_CLK (11)
#define TOSA_GPIO_BAT1_CRG (12)
#define TOSA_GPIO_CF_CD (13)
#define TOSA_GPIO_BAT0_CRG (14)
#define TOSA_GPIO_TC6393_INT (15)
#define TOSA_GPIO_BAT0_LOW (17)
#define TOSA_GPIO_TC6393_RDY (18)
#define TOSA_GPIO_ON_RESET (19)
#define TOSA_GPIO_EAR_IN (20)
#define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */
#define TOSA_GPIO_ON_KEY (22)
#define TOSA_GPIO_VGA_LINE (27)
#define TOSA_GPIO_TP_INT (32) /* Touch Panel pen down interrupt */
#define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */
#define TOSA_GPIO_BAT_LOCKED (38) /* Battery locked */
#define TOSA_GPIO_TG_SPI_SCLK (81)
#define TOSA_GPIO_TG_SPI_CS (82)
#define TOSA_GPIO_TG_SPI_MOSI (83)
#define TOSA_GPIO_BAT1_LOW (84)
#define TOSA_GPIO_HP_IN GPIO_EAR_IN
#define TOSA_GPIO_MAIN_BAT_LOW GPIO_BAT0_LOW
#define TOSA_KEY_STROBE_NUM (11)
#define TOSA_KEY_SENSE_NUM (7)
#define TOSA_GPIO_HIGH_STROBE_BIT (0xfc000000)
#define TOSA_GPIO_LOW_STROBE_BIT (0x0000001f)
#define TOSA_GPIO_ALL_SENSE_BIT (0x00000fe0)
#define TOSA_GPIO_ALL_SENSE_RSHIFT (5)
#define TOSA_GPIO_STROBE_BIT(a) GPIO_bit(58+(a))
#define TOSA_GPIO_SENSE_BIT(a) GPIO_bit(69+(a))
#define TOSA_GAFR_HIGH_STROBE_BIT (0xfff00000)
#define TOSA_GAFR_LOW_STROBE_BIT (0x000003ff)
#define TOSA_GAFR_ALL_SENSE_BIT (0x00fffc00)
#define TOSA_GPIO_KEY_SENSE(a) (69+(a))
#define TOSA_GPIO_KEY_STROBE(a) (58+(a))
/*
* Interrupts
*/
#define TOSA_IRQ_GPIO_WAKEUP IRQ_GPIO(TOSA_GPIO_WAKEUP)
#define TOSA_IRQ_GPIO_AC_IN IRQ_GPIO(TOSA_GPIO_AC_IN)
#define TOSA_IRQ_GPIO_RECORD_BTN IRQ_GPIO(TOSA_GPIO_RECORD_BTN)
#define TOSA_IRQ_GPIO_SYNC IRQ_GPIO(TOSA_GPIO_SYNC)
#define TOSA_IRQ_GPIO_USB_IN IRQ_GPIO(TOSA_GPIO_USB_IN)
#define TOSA_IRQ_GPIO_JACKET_DETECT IRQ_GPIO(TOSA_GPIO_JACKET_DETECT)
#define TOSA_IRQ_GPIO_nSD_INT IRQ_GPIO(TOSA_GPIO_nSD_INT)
#define TOSA_IRQ_GPIO_nSD_DETECT IRQ_GPIO(TOSA_GPIO_nSD_DETECT)
#define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG)
#define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD)
#define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG)
#define TOSA_IRQ_GPIO_TC6393_INT IRQ_GPIO(TOSA_GPIO_TC6393_INT)
#define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW)
#define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN)
#define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ)
#define TOSA_IRQ_GPIO_ON_KEY IRQ_GPIO(TOSA_GPIO_ON_KEY)
#define TOSA_IRQ_GPIO_VGA_LINE IRQ_GPIO(TOSA_GPIO_VGA_LINE)
#define TOSA_IRQ_GPIO_TP_INT IRQ_GPIO(TOSA_GPIO_TP_INT)
#define TOSA_IRQ_GPIO_JC_CF_IRQ IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ)
#define TOSA_IRQ_GPIO_BAT_LOCKED IRQ_GPIO(TOSA_GPIO_BAT_LOCKED)
#define TOSA_IRQ_GPIO_BAT1_LOW IRQ_GPIO(TOSA_GPIO_BAT1_LOW)
#define TOSA_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(69+(a))
#define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW)
extern struct platform_device tosascoop_jc_device;
extern struct platform_device tosascoop_device;
#endif /* _ASM_ARCH_TOSA_H_ */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册