提交 8403b13c 编写于 作者: F Frank Blaschka 提交者: David S. Miller

qeth: convert to net_device_ops

qeth_l2, qeth_l3 convert to net_device_ops.
qeth_l3 remove vlan neigh_setup hack since it does not work any longer
with the new net_device_ops.
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 cc883d16
......@@ -918,6 +918,21 @@ static struct ethtool_ops qeth_l2_osn_ops = {
.get_drvinfo = qeth_core_get_drvinfo,
};
static struct net_device_ops qeth_l2_netdev_ops = {
.ndo_open = qeth_l2_open,
.ndo_stop = qeth_l2_stop,
.ndo_get_stats = qeth_get_stats,
.ndo_start_xmit = qeth_l2_hard_start_xmit,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_multicast_list = qeth_l2_set_multicast_list,
.ndo_do_ioctl = qeth_l2_do_ioctl,
.ndo_set_mac_address = qeth_l2_set_mac_address,
.ndo_change_mtu = qeth_change_mtu,
.ndo_vlan_rx_add_vid = qeth_l2_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = qeth_l2_vlan_rx_kill_vid,
.ndo_tx_timeout = qeth_tx_timeout,
};
static int qeth_l2_setup_netdev(struct qeth_card *card)
{
switch (card->info.type) {
......@@ -939,19 +954,9 @@ static int qeth_l2_setup_netdev(struct qeth_card *card)
return -ENODEV;
card->dev->ml_priv = card;
card->dev->tx_timeout = &qeth_tx_timeout;
card->dev->watchdog_timeo = QETH_TX_TIMEOUT;
card->dev->open = qeth_l2_open;
card->dev->stop = qeth_l2_stop;
card->dev->hard_start_xmit = qeth_l2_hard_start_xmit;
card->dev->do_ioctl = qeth_l2_do_ioctl;
card->dev->get_stats = qeth_get_stats;
card->dev->change_mtu = qeth_change_mtu;
card->dev->set_multicast_list = qeth_l2_set_multicast_list;
card->dev->vlan_rx_kill_vid = qeth_l2_vlan_rx_kill_vid;
card->dev->vlan_rx_add_vid = qeth_l2_vlan_rx_add_vid;
card->dev->set_mac_address = qeth_l2_set_mac_address;
card->dev->mtu = card->info.initial_mtu;
card->dev->netdev_ops = &qeth_l2_netdev_ops;
if (card->info.type != QETH_CARD_TYPE_OSN)
SET_ETHTOOL_OPS(card->dev, &qeth_l2_ethtool_ops);
else
......
......@@ -1831,28 +1831,6 @@ static void qeth_l3_vlan_rx_register(struct net_device *dev,
static void qeth_l3_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
{
struct net_device *vlandev;
struct qeth_card *card = dev->ml_priv;
struct in_device *in_dev;
if (card->info.type == QETH_CARD_TYPE_IQD)
return;
vlandev = vlan_group_get_device(card->vlangrp, vid);
vlandev->neigh_setup = qeth_l3_neigh_setup;
in_dev = in_dev_get(vlandev);
#ifdef CONFIG_SYSCTL
neigh_sysctl_unregister(in_dev->arp_parms);
#endif
neigh_parms_release(&arp_tbl, in_dev->arp_parms);
in_dev->arp_parms = neigh_parms_alloc(vlandev, &arp_tbl);
#ifdef CONFIG_SYSCTL
neigh_sysctl_register(vlandev, in_dev->arp_parms, NET_IPV4,
NET_IPV4_NEIGH, "ipv4", NULL, NULL);
#endif
in_dev_put(in_dev);
return;
}
......@@ -2918,6 +2896,21 @@ qeth_l3_neigh_setup(struct net_device *dev, struct neigh_parms *np)
return 0;
}
static struct net_device_ops qeth_l3_netdev_ops = {
.ndo_open = qeth_l3_open,
.ndo_stop = qeth_l3_stop,
.ndo_get_stats = qeth_get_stats,
.ndo_start_xmit = qeth_l3_hard_start_xmit,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_multicast_list = qeth_l3_set_multicast_list,
.ndo_do_ioctl = qeth_l3_do_ioctl,
.ndo_change_mtu = qeth_change_mtu,
.ndo_vlan_rx_register = qeth_l3_vlan_rx_register,
.ndo_vlan_rx_add_vid = qeth_l3_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = qeth_l3_vlan_rx_kill_vid,
.ndo_tx_timeout = qeth_tx_timeout,
};
static int qeth_l3_setup_netdev(struct qeth_card *card)
{
if (card->info.type == QETH_CARD_TYPE_OSAE) {
......@@ -2932,7 +2925,8 @@ static int qeth_l3_setup_netdev(struct qeth_card *card)
card->dev = alloc_etherdev(0);
if (!card->dev)
return -ENODEV;
card->dev->neigh_setup = qeth_l3_neigh_setup;
qeth_l3_netdev_ops.ndo_neigh_setup =
qeth_l3_neigh_setup;
/*IPv6 address autoconfiguration stuff*/
qeth_l3_get_unique_id(card);
......@@ -2949,21 +2943,10 @@ static int qeth_l3_setup_netdev(struct qeth_card *card)
} else
return -ENODEV;
card->dev->hard_start_xmit = qeth_l3_hard_start_xmit;
card->dev->ml_priv = card;
card->dev->tx_timeout = &qeth_tx_timeout;
card->dev->watchdog_timeo = QETH_TX_TIMEOUT;
card->dev->open = qeth_l3_open;
card->dev->stop = qeth_l3_stop;
card->dev->do_ioctl = qeth_l3_do_ioctl;
card->dev->get_stats = qeth_get_stats;
card->dev->change_mtu = qeth_change_mtu;
card->dev->set_multicast_list = qeth_l3_set_multicast_list;
card->dev->vlan_rx_register = qeth_l3_vlan_rx_register;
card->dev->vlan_rx_add_vid = qeth_l3_vlan_rx_add_vid;
card->dev->vlan_rx_kill_vid = qeth_l3_vlan_rx_kill_vid;
card->dev->mtu = card->info.initial_mtu;
card->dev->set_mac_address = NULL;
card->dev->netdev_ops = &qeth_l3_netdev_ops;
SET_ETHTOOL_OPS(card->dev, &qeth_l3_ethtool_ops);
card->dev->features |= NETIF_F_HW_VLAN_TX |
NETIF_F_HW_VLAN_RX |
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册