提交 83ce0741 编写于 作者: A Alexander Usyskin 提交者: Greg Kroah-Hartman

mei: fix syntax in comments and debug output

Fix syntax errors in comments and debug strings
Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
上级 0631213f
......@@ -177,7 +177,7 @@ int mei_amthif_read(struct mei_device *dev, struct file *file,
unsigned long timeout;
int i;
/* Only Posible if we are in timeout */
/* Only possible if we are in timeout */
if (!cl || cl != &dev->iamthif_cl) {
dev_dbg(&dev->pdev->dev, "bad file ext.\n");
return -ETIMEDOUT;
......@@ -249,7 +249,7 @@ int mei_amthif_read(struct mei_device *dev, struct file *file,
cb->response_buffer.size);
dev_dbg(&dev->pdev->dev, "amthif cb->buf_idx - %lu\n", cb->buf_idx);
/* length is being turncated to PAGE_SIZE, however,
/* length is being truncated to PAGE_SIZE, however,
* the buf_idx may point beyond */
length = min_t(size_t, length, (cb->buf_idx - *offset));
......
......@@ -154,7 +154,7 @@ int mei_io_cb_alloc_req_buf(struct mei_cl_cb *cb, size_t length)
return 0;
}
/**
* mei_io_cb_alloc_resp_buf - allocate respose buffer
* mei_io_cb_alloc_resp_buf - allocate response buffer
*
* @cb: io callback structure
* @length: size of the buffer
......@@ -207,7 +207,7 @@ int mei_cl_flush_queues(struct mei_cl *cl)
/**
* mei_cl_init - initializes intialize cl.
* mei_cl_init - initializes cl.
*
* @cl: host client to be initialized
* @dev: mei device
......@@ -263,10 +263,10 @@ struct mei_cl_cb *mei_cl_find_read_cb(struct mei_cl *cl)
return NULL;
}
/** mei_cl_link: allocte host id in the host map
/** mei_cl_link: allocate host id in the host map
*
* @cl - host client
* @id - fixed host id or -1 for genereting one
* @id - fixed host id or -1 for generic one
*
* returns 0 on success
* -EINVAL on incorrect values
......@@ -282,19 +282,19 @@ int mei_cl_link(struct mei_cl *cl, int id)
dev = cl->dev;
/* If Id is not asigned get one*/
/* If Id is not assigned get one*/
if (id == MEI_HOST_CLIENT_ID_ANY)
id = find_first_zero_bit(dev->host_clients_map,
MEI_CLIENTS_MAX);
if (id >= MEI_CLIENTS_MAX) {
dev_err(&dev->pdev->dev, "id exceded %d", MEI_CLIENTS_MAX) ;
dev_err(&dev->pdev->dev, "id exceeded %d", MEI_CLIENTS_MAX);
return -EMFILE;
}
open_handle_count = dev->open_handle_count + dev->iamthif_open_count;
if (open_handle_count >= MEI_MAX_OPEN_HANDLE_COUNT) {
dev_err(&dev->pdev->dev, "open_handle_count exceded %d",
dev_err(&dev->pdev->dev, "open_handle_count exceeded %d",
MEI_MAX_OPEN_HANDLE_COUNT);
return -EMFILE;
}
......@@ -376,7 +376,7 @@ void mei_host_client_init(struct work_struct *work)
/**
* mei_cl_disconnect - disconnect host clinet form the me one
* mei_cl_disconnect - disconnect host client from the me one
*
* @cl: host client
*
......@@ -455,7 +455,7 @@ int mei_cl_disconnect(struct mei_cl *cl)
*
* @cl: private data of the file object
*
* returns ture if other client is connected, 0 - otherwise.
* returns true if other client is connected, false - otherwise.
*/
bool mei_cl_is_other_connecting(struct mei_cl *cl)
{
......@@ -479,7 +479,7 @@ bool mei_cl_is_other_connecting(struct mei_cl *cl)
}
/**
* mei_cl_connect - connect host clinet to the me one
* mei_cl_connect - connect host client to the me one
*
* @cl: host client
*
......@@ -774,7 +774,7 @@ int mei_cl_irq_write_complete(struct mei_cl *cl, struct mei_cl_cb *cb,
* @cl: host client
* @cl: write callback with filled data
*
* returns numbe of bytes sent on success, <0 on failure.
* returns number of bytes sent on success, <0 on failure.
*/
int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking)
{
......
......@@ -43,7 +43,7 @@ static ssize_t mei_dbgfs_read_meclients(struct file *fp, char __user *ubuf,
mutex_lock(&dev->device_lock);
/* if the driver is not enabled the list won't b consitent */
/* if the driver is not enabled the list won't be consistent */
if (dev->dev_state != MEI_DEV_ENABLED)
goto out;
......@@ -101,7 +101,7 @@ static const struct file_operations mei_dbgfs_fops_devstate = {
/**
* mei_dbgfs_deregister - Remove the debugfs files and directories
* @mei - pointer to mei device private dat
* @mei - pointer to mei device private data
*/
void mei_dbgfs_deregister(struct mei_device *dev)
{
......
......@@ -83,12 +83,12 @@ void mei_hbm_cl_hdr(struct mei_cl *cl, u8 hbm_cmd, void *buf, size_t len)
}
/**
* same_disconn_addr - tells if they have the same address
* mei_hbm_cl_addr_equal - tells if they have the same address
*
* @file: private data of the file object.
* @disconn: disconnection request.
* @cl: - client
* @buf: buffer with cl header
*
* returns true if addres are same
* returns true if addresses are the same
*/
static inline
bool mei_hbm_cl_addr_equal(struct mei_cl *cl, void *buf)
......@@ -283,7 +283,7 @@ static int mei_hbm_prop_req(struct mei_device *dev)
}
/**
* mei_hbm_stop_req_prepare - perpare stop request message
* mei_hbm_stop_req_prepare - prepare stop request message
*
* @dev - mei device
* @mei_hdr - mei message header
......@@ -304,7 +304,7 @@ static void mei_hbm_stop_req_prepare(struct mei_device *dev,
}
/**
* mei_hbm_cl_flow_control_req - sends flow control requst.
* mei_hbm_cl_flow_control_req - sends flow control request.
*
* @dev: the device structure
* @cl: client info
......@@ -466,7 +466,7 @@ int mei_hbm_cl_connect_req(struct mei_device *dev, struct mei_cl *cl)
}
/**
* mei_hbm_cl_connect_res - connect resposne from the ME
* mei_hbm_cl_connect_res - connect response from the ME
*
* @dev: the device structure
* @rs: connect response bus message
......@@ -520,8 +520,8 @@ static void mei_hbm_cl_connect_res(struct mei_device *dev,
/**
* mei_hbm_fw_disconnect_req - disconnect request initiated by me
* host sends disoconnect response
* mei_hbm_fw_disconnect_req - disconnect request initiated by ME firmware
* host sends disconnect response
*
* @dev: the device structure.
* @disconnect_req: disconnect request bus message from the me
......
......@@ -31,7 +31,7 @@
/**
* mei_irq_compl_handler - dispatch complete handelers
* mei_irq_compl_handler - dispatch complete handlers
* for the completed callbacks
*
* @dev - mei device
......@@ -338,7 +338,7 @@ int mei_irq_read_handler(struct mei_device *dev,
goto reset_slots;
}
/* find recepient cl */
/* find recipient cl */
list_for_each_entry(cl, &dev->file_list, link) {
if (mei_cl_hbm_equal(cl, mei_hdr)) {
cl_dbg(dev, cl, "got a message\n");
......@@ -346,7 +346,7 @@ int mei_irq_read_handler(struct mei_device *dev,
}
}
/* if no recepient cl was found we assume corrupted header\n */
/* if no recipient cl was found we assume corrupted header */
if (&cl->link == &dev->file_list) {
dev_err(&dev->pdev->dev, "no destination client found 0x%08X\n",
dev->rd_msg_hdr);
......
......@@ -48,7 +48,7 @@
*
* @inode: pointer to inode structure
* @file: pointer to file structure
e
*
* returns 0 on success, <0 on error
*/
static int mei_open(struct inode *inode, struct file *file)
......
......@@ -65,7 +65,7 @@ extern const uuid_le mei_wd_guid;
* that can be opened to the driver.
*
* Limit to 255: 256 Total Clients
* minus internal client for MEI Bus Messags
* minus internal client for MEI Bus Messages
*/
#define MEI_MAX_OPEN_HANDLE_COUNT (MEI_CLIENTS_MAX - 1)
......@@ -181,7 +181,7 @@ struct mei_cl_cb {
u32 internal:1;
};
/* MEI client instance carried as file->pirvate_data*/
/* MEI client instance carried as file->private_data*/
struct mei_cl {
struct list_head link;
struct mei_device *dev;
......
......@@ -92,7 +92,7 @@ struct mei_nfc_hci_hdr {
* @cl: NFC host client
* @cl_info: NFC info host client
* @init_work: perform connection to the info client
* @fw_ivn: NFC Intervace Version Number
* @fw_ivn: NFC Interface Version Number
* @vendor_id: NFC manufacturer ID
* @radio_type: NFC radio type
*/
......@@ -163,7 +163,7 @@ static int mei_nfc_build_bus_name(struct mei_nfc_dev *ndev)
return 0;
default:
dev_err(&dev->pdev->dev, "Unknow radio type 0x%x\n",
dev_err(&dev->pdev->dev, "Unknown radio type 0x%x\n",
ndev->radio_type);
return -EINVAL;
......@@ -175,14 +175,14 @@ static int mei_nfc_build_bus_name(struct mei_nfc_dev *ndev)
ndev->bus_name = "pn544";
return 0;
default:
dev_err(&dev->pdev->dev, "Unknow radio type 0x%x\n",
dev_err(&dev->pdev->dev, "Unknown radio type 0x%x\n",
ndev->radio_type);
return -EINVAL;
}
default:
dev_err(&dev->pdev->dev, "Unknow vendor ID 0x%x\n",
dev_err(&dev->pdev->dev, "Unknown vendor ID 0x%x\n",
ndev->vendor_id);
return -EINVAL;
......@@ -428,7 +428,7 @@ static void mei_nfc_init(struct work_struct *work)
mutex_unlock(&dev->device_lock);
if (mei_nfc_if_version(ndev) < 0) {
dev_err(&dev->pdev->dev, "Could not get the NFC interfave version");
dev_err(&dev->pdev->dev, "Could not get the NFC interface version");
goto err;
}
......@@ -483,7 +483,7 @@ int mei_nfc_host_init(struct mei_device *dev)
struct mei_cl *cl_info, *cl = NULL;
int i, ret;
/* already initialzed */
/* already initialized */
if (ndev->cl_info)
return 0;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册