提交 82da703e 编写于 作者: L Leonid Arsh 提交者: Roland Dreier

IB/mthca: Add HCA profile module parameters

Add module parameters that enable settting some of the HCA
profile values, such as the number of QPs, CQs, etc.
Signed-off-by: NLeonid Arsh <leonida@voltaire.com>
Signed-off-by: NMoni Shoua <monis@voltaire.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
上级 bf628dc2
...@@ -82,22 +82,59 @@ MODULE_PARM_DESC(tune_pci, "increase PCI burst from the default set by BIOS if n ...@@ -82,22 +82,59 @@ MODULE_PARM_DESC(tune_pci, "increase PCI burst from the default set by BIOS if n
struct mutex mthca_device_mutex; struct mutex mthca_device_mutex;
#define MTHCA_DEFAULT_NUM_QP (1 << 16)
#define MTHCA_DEFAULT_RDB_PER_QP (1 << 2)
#define MTHCA_DEFAULT_NUM_CQ (1 << 16)
#define MTHCA_DEFAULT_NUM_MCG (1 << 13)
#define MTHCA_DEFAULT_NUM_MPT (1 << 17)
#define MTHCA_DEFAULT_NUM_MTT (1 << 20)
#define MTHCA_DEFAULT_NUM_UDAV (1 << 15)
#define MTHCA_DEFAULT_NUM_RESERVED_MTTS (1 << 18)
#define MTHCA_DEFAULT_NUM_UARC_SIZE (1 << 18)
static struct mthca_profile hca_profile = {
.num_qp = MTHCA_DEFAULT_NUM_QP,
.rdb_per_qp = MTHCA_DEFAULT_RDB_PER_QP,
.num_cq = MTHCA_DEFAULT_NUM_CQ,
.num_mcg = MTHCA_DEFAULT_NUM_MCG,
.num_mpt = MTHCA_DEFAULT_NUM_MPT,
.num_mtt = MTHCA_DEFAULT_NUM_MTT,
.num_udav = MTHCA_DEFAULT_NUM_UDAV, /* Tavor only */
.fmr_reserved_mtts = MTHCA_DEFAULT_NUM_RESERVED_MTTS, /* Tavor only */
.uarc_size = MTHCA_DEFAULT_NUM_UARC_SIZE, /* Arbel only */
};
module_param_named(num_qp, hca_profile.num_qp, int, 0444);
MODULE_PARM_DESC(num_qp, "maximum number of QPs per HCA");
module_param_named(rdb_per_qp, hca_profile.rdb_per_qp, int, 0444);
MODULE_PARM_DESC(rdb_per_qp, "number of RDB buffers per QP");
module_param_named(num_cq, hca_profile.num_cq, int, 0444);
MODULE_PARM_DESC(num_cq, "maximum number of CQs per HCA");
module_param_named(num_mcg, hca_profile.num_mcg, int, 0444);
MODULE_PARM_DESC(num_mcg, "maximum number of multicast groups per HCA");
module_param_named(num_mpt, hca_profile.num_mpt, int, 0444);
MODULE_PARM_DESC(num_mpt,
"maximum number of memory protection table entries per HCA");
module_param_named(num_mtt, hca_profile.num_mtt, int, 0444);
MODULE_PARM_DESC(num_mtt,
"maximum number of memory translation table segments per HCA");
module_param_named(num_udav, hca_profile.num_udav, int, 0444);
MODULE_PARM_DESC(num_udav, "maximum number of UD address vectors per HCA");
module_param_named(fmr_reserved_mtts, hca_profile.fmr_reserved_mtts, int, 0444);
MODULE_PARM_DESC(fmr_reserved_mtts,
"number of memory translation table segments reserved for FMR");
static const char mthca_version[] __devinitdata = static const char mthca_version[] __devinitdata =
DRV_NAME ": Mellanox InfiniBand HCA driver v" DRV_NAME ": Mellanox InfiniBand HCA driver v"
DRV_VERSION " (" DRV_RELDATE ")\n"; DRV_VERSION " (" DRV_RELDATE ")\n";
static struct mthca_profile default_profile = {
.num_qp = 1 << 16,
.rdb_per_qp = 4,
.num_cq = 1 << 16,
.num_mcg = 1 << 13,
.num_mpt = 1 << 17,
.num_mtt = 1 << 20,
.num_udav = 1 << 15, /* Tavor only */
.fmr_reserved_mtts = 1 << 18, /* Tavor only */
.uarc_size = 1 << 18, /* Arbel only */
};
static int mthca_tune_pci(struct mthca_dev *mdev) static int mthca_tune_pci(struct mthca_dev *mdev)
{ {
int cap; int cap;
...@@ -303,7 +340,7 @@ static int mthca_init_tavor(struct mthca_dev *mdev) ...@@ -303,7 +340,7 @@ static int mthca_init_tavor(struct mthca_dev *mdev)
goto err_disable; goto err_disable;
} }
profile = default_profile; profile = hca_profile;
profile.num_uar = dev_lim.uar_size / PAGE_SIZE; profile.num_uar = dev_lim.uar_size / PAGE_SIZE;
profile.uarc_size = 0; profile.uarc_size = 0;
if (mdev->mthca_flags & MTHCA_FLAG_SRQ) if (mdev->mthca_flags & MTHCA_FLAG_SRQ)
...@@ -621,7 +658,7 @@ static int mthca_init_arbel(struct mthca_dev *mdev) ...@@ -621,7 +658,7 @@ static int mthca_init_arbel(struct mthca_dev *mdev)
goto err_stop_fw; goto err_stop_fw;
} }
profile = default_profile; profile = hca_profile;
profile.num_uar = dev_lim.uar_size / PAGE_SIZE; profile.num_uar = dev_lim.uar_size / PAGE_SIZE;
profile.num_udav = 0; profile.num_udav = 0;
if (mdev->mthca_flags & MTHCA_FLAG_SRQ) if (mdev->mthca_flags & MTHCA_FLAG_SRQ)
...@@ -1278,11 +1315,57 @@ static struct pci_driver mthca_driver = { ...@@ -1278,11 +1315,57 @@ static struct pci_driver mthca_driver = {
.remove = __devexit_p(mthca_remove_one) .remove = __devexit_p(mthca_remove_one)
}; };
static void __init __mthca_check_profile_val(const char *name, int *pval,
int pval_default)
{
/* value must be positive and power of 2 */
int old_pval = *pval;
if (old_pval <= 0)
*pval = pval_default;
else
*pval = roundup_pow_of_two(old_pval);
if (old_pval != *pval) {
printk(KERN_WARNING PFX "Invalid value %d for %s in module parameter.\n",
old_pval, name);
printk(KERN_WARNING PFX "Corrected %s to %d.\n", name, *pval);
}
}
#define mthca_check_profile_val(name, default) \
__mthca_check_profile_val(#name, &hca_profile.name, default)
static void __init mthca_validate_profile(void)
{
mthca_check_profile_val(num_qp, MTHCA_DEFAULT_NUM_QP);
mthca_check_profile_val(rdb_per_qp, MTHCA_DEFAULT_RDB_PER_QP);
mthca_check_profile_val(num_cq, MTHCA_DEFAULT_NUM_CQ);
mthca_check_profile_val(num_mcg, MTHCA_DEFAULT_NUM_MCG);
mthca_check_profile_val(num_mpt, MTHCA_DEFAULT_NUM_MPT);
mthca_check_profile_val(num_mtt, MTHCA_DEFAULT_NUM_MTT);
mthca_check_profile_val(num_udav, MTHCA_DEFAULT_NUM_UDAV);
mthca_check_profile_val(fmr_reserved_mtts, MTHCA_DEFAULT_NUM_RESERVED_MTTS);
if (hca_profile.fmr_reserved_mtts >= hca_profile.num_mtt) {
printk(KERN_WARNING PFX "Invalid fmr_reserved_mtts module parameter %d.\n",
hca_profile.fmr_reserved_mtts);
printk(KERN_WARNING PFX "(Must be smaller than num_mtt %d)\n",
hca_profile.num_mtt);
hca_profile.fmr_reserved_mtts = hca_profile.num_mtt / 2;
printk(KERN_WARNING PFX "Corrected fmr_reserved_mtts to %d.\n",
hca_profile.fmr_reserved_mtts);
}
}
static int __init mthca_init(void) static int __init mthca_init(void)
{ {
int ret; int ret;
mutex_init(&mthca_device_mutex); mutex_init(&mthca_device_mutex);
mthca_validate_profile();
ret = mthca_catas_init(); ret = mthca_catas_init();
if (ret) if (ret)
return ret; return ret;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册