提交 81fadd81 编写于 作者: A Alexander Duyck 提交者: David S. Miller

igb: move the generic copper link setup code into e1000_phy.c

This patch moves the generic portion of the copper link setup into a
seperate function in e1000_phy.c.  This helps to reduce the size of
copper_link_setup_82575 and make it a bit more readable.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 285b4167
...@@ -907,7 +907,6 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) ...@@ -907,7 +907,6 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
{ {
u32 ctrl; u32 ctrl;
s32 ret_val; s32 ret_val;
bool link;
ctrl = rd32(E1000_CTRL); ctrl = rd32(E1000_CTRL);
ctrl |= E1000_CTRL_SLU; ctrl |= E1000_CTRL_SLU;
...@@ -940,44 +939,7 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw) ...@@ -940,44 +939,7 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
if (ret_val) if (ret_val)
goto out; goto out;
if (hw->mac.autoneg) { ret_val = igb_setup_copper_link(hw);
/*
* Setup autoneg and flow control advertisement
* and perform autonegotiation.
*/
ret_val = igb_copper_link_autoneg(hw);
if (ret_val)
goto out;
} else {
/*
* PHY will be set to 10H, 10F, 100H or 100F
* depending on user settings.
*/
hw_dbg("Forcing Speed and Duplex\n");
ret_val = hw->phy.ops.force_speed_duplex(hw);
if (ret_val) {
hw_dbg("Error Forcing Speed and Duplex\n");
goto out;
}
}
/*
* Check link status. Wait up to 100 microseconds for link to become
* valid.
*/
ret_val = igb_phy_has_link(hw, COPPER_LINK_UP_LIMIT, 10, &link);
if (ret_val)
goto out;
if (link) {
hw_dbg("Valid link established!!!\n");
/* Config the MAC and PHY after link is up */
igb_config_collision_dist(hw);
ret_val = igb_config_fc_after_link_up(hw);
} else {
hw_dbg("Unable to establish link!!!\n");
}
out: out:
return ret_val; return ret_val;
} }
......
...@@ -669,7 +669,7 @@ s32 igb_copper_link_setup_igp(struct e1000_hw *hw) ...@@ -669,7 +669,7 @@ s32 igb_copper_link_setup_igp(struct e1000_hw *hw)
* and restart the negotiation process between the link partner. If * and restart the negotiation process between the link partner. If
* autoneg_wait_to_complete, then wait for autoneg to complete before exiting. * autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
**/ **/
s32 igb_copper_link_autoneg(struct e1000_hw *hw) static s32 igb_copper_link_autoneg(struct e1000_hw *hw)
{ {
struct e1000_phy_info *phy = &hw->phy; struct e1000_phy_info *phy = &hw->phy;
s32 ret_val; s32 ret_val;
...@@ -892,6 +892,65 @@ static s32 igb_phy_setup_autoneg(struct e1000_hw *hw) ...@@ -892,6 +892,65 @@ static s32 igb_phy_setup_autoneg(struct e1000_hw *hw)
return ret_val; return ret_val;
} }
/**
* igb_setup_copper_link - Configure copper link settings
* @hw: pointer to the HW structure
*
* Calls the appropriate function to configure the link for auto-neg or forced
* speed and duplex. Then we check for link, once link is established calls
* to configure collision distance and flow control are called. If link is
* not established, we return -E1000_ERR_PHY (-2).
**/
s32 igb_setup_copper_link(struct e1000_hw *hw)
{
s32 ret_val;
bool link;
if (hw->mac.autoneg) {
/*
* Setup autoneg and flow control advertisement and perform
* autonegotiation.
*/
ret_val = igb_copper_link_autoneg(hw);
if (ret_val)
goto out;
} else {
/*
* PHY will be set to 10H, 10F, 100H or 100F
* depending on user settings.
*/
hw_dbg("Forcing Speed and Duplex\n");
ret_val = hw->phy.ops.force_speed_duplex(hw);
if (ret_val) {
hw_dbg("Error Forcing Speed and Duplex\n");
goto out;
}
}
/*
* Check link status. Wait up to 100 microseconds for link to become
* valid.
*/
ret_val = igb_phy_has_link(hw,
COPPER_LINK_UP_LIMIT,
10,
&link);
if (ret_val)
goto out;
if (link) {
hw_dbg("Valid link established!!!\n");
igb_config_collision_dist(hw);
ret_val = igb_config_fc_after_link_up(hw);
} else {
hw_dbg("Unable to establish link!!!\n");
}
out:
return ret_val;
}
/** /**
* igb_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY * igb_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
* @hw: pointer to the HW structure * @hw: pointer to the HW structure
......
...@@ -43,7 +43,6 @@ enum e1000_smart_speed { ...@@ -43,7 +43,6 @@ enum e1000_smart_speed {
s32 igb_check_downshift(struct e1000_hw *hw); s32 igb_check_downshift(struct e1000_hw *hw);
s32 igb_check_reset_block(struct e1000_hw *hw); s32 igb_check_reset_block(struct e1000_hw *hw);
s32 igb_copper_link_autoneg(struct e1000_hw *hw);
s32 igb_copper_link_setup_igp(struct e1000_hw *hw); s32 igb_copper_link_setup_igp(struct e1000_hw *hw);
s32 igb_copper_link_setup_m88(struct e1000_hw *hw); s32 igb_copper_link_setup_m88(struct e1000_hw *hw);
s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw); s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw);
...@@ -57,6 +56,7 @@ s32 igb_phy_sw_reset(struct e1000_hw *hw); ...@@ -57,6 +56,7 @@ s32 igb_phy_sw_reset(struct e1000_hw *hw);
s32 igb_phy_hw_reset(struct e1000_hw *hw); s32 igb_phy_hw_reset(struct e1000_hw *hw);
s32 igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data); s32 igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active); s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active);
s32 igb_setup_copper_link(struct e1000_hw *hw);
s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data); s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations, s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
u32 usec_interval, bool *success); u32 usec_interval, bool *success);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册