ath9k: Remove hw capability bit meant for btcoex

We don't need a hw cap bit for btcoex anymore as btcoex scheme type
is enough to do this.
Signed-off-by: NVasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath9k/hw.c

@@ -3666,7 +3666,6 @@ void ath9k_hw_fill_cap_info(struct ath_hw *ah)
 		ah->eep_ops->get_num_ant_config(ah, ATH9K_HAL_FREQ_BAND_2GHZ);
 
 	if (AR_SREV_9280_10_OR_LATER(ah) && btcoex_enable) {
-		pCap->hw_caps |= ATH9K_HW_CAP_BT_COEX;
 		btcoex_info->btactive_gpio = ATH_BTACTIVE_GPIO;
 		btcoex_info->wlanactive_gpio = ATH_WLANACTIVE_GPIO;
 

drivers/net/wireless/ath/ath9k/hw.h

@@ -151,7 +151,6 @@ enum ath9k_hw_caps {
 	ATH9K_HW_CAP_ENHANCEDPM                 = BIT(14),
 	ATH9K_HW_CAP_AUTOSLEEP                  = BIT(15),
 	ATH9K_HW_CAP_4KB_SPLITTRANS             = BIT(16),
-	ATH9K_HW_CAP_BT_COEX			= BIT(17)
 };
 
 enum ath9k_capability_type {

drivers/net/wireless/ath/ath9k/main.c

@@ -440,7 +440,7 @@ static void ath_start_ani(struct ath_softc *sc)
 void ath_update_chainmask(struct ath_softc *sc, int is_ht)
 {
 	if ((sc->sc_flags & SC_OP_SCANNING) || is_ht ||
-	    (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BT_COEX)) {
+	    (sc->btcoex_info.btcoex_scheme != ATH_BTCOEX_CFG_NONE)) {
 		sc->tx_chainmask = sc->sc_ah->caps.tx_chainmask;
 		sc->rx_chainmask = sc->sc_ah->caps.rx_chainmask;
 	} else {
@@ -1509,8 +1509,7 @@ static int ath_init_softc(u16 devid, struct ath_softc *sc)
 			ARRAY_SIZE(ath9k_5ghz_chantable);
 	}
 
-	if ((ah->caps.hw_caps & ATH9K_HW_CAP_BT_COEX) &&
-	    (sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_2WIRE))
+	if (sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_2WIRE)
 		ath9k_hw_btcoex_init(ah);
 
 	return 0;
@@ -1993,8 +1992,7 @@ static int ath9k_start(struct ieee80211_hw *hw)
 
 	ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
 
-	if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_BT_COEX) &&
-	    (sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_2WIRE) &&
+	if ((sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_2WIRE) &&
 	    !(sc->sc_flags & SC_OP_BTCOEX_ENABLED))
 		ath9k_hw_btcoex_enable(sc->sc_ah);