提交 81f95a55 编写于 作者: M Michael S. Tsirkin

vhost: move per-vq net specific fields out to net

This will remove the need for vhost scsi to pull
in virtio-net.h.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
上级 3dfbff32
......@@ -72,6 +72,12 @@ struct vhost_ubuf_ref {
struct vhost_net_virtqueue {
struct vhost_virtqueue vq;
/* hdr is used to store the virtio header.
* Since each iovec has >= 1 byte length, we never need more than
* header length entries to store the header. */
struct iovec hdr[sizeof(struct virtio_net_hdr_mrg_rxbuf)];
size_t vhost_hlen;
size_t sock_hlen;
/* vhost zerocopy support fields below: */
/* last used idx for outstanding DMA zerocopy buffers */
int upend_idx;
......@@ -166,7 +172,7 @@ int vhost_net_set_ubuf_info(struct vhost_net *n)
return -ENOMEM;
}
void vhost_net_reset_ubuf_info(struct vhost_net *n)
void vhost_net_vq_reset(struct vhost_net *n)
{
int i;
......@@ -176,6 +182,8 @@ void vhost_net_reset_ubuf_info(struct vhost_net *n)
n->vqs[i].ubufs = NULL;
kfree(n->vqs[i].ubuf_info);
n->vqs[i].ubuf_info = NULL;
n->vqs[i].vhost_hlen = 0;
n->vqs[i].sock_hlen = 0;
}
}
......@@ -302,8 +310,8 @@ static void vhost_zerocopy_callback(struct ubuf_info *ubuf, bool success)
* read-size critical section for our kind of RCU. */
static void handle_tx(struct vhost_net *net)
{
struct vhost_virtqueue *vq = &net->vqs[VHOST_NET_VQ_TX].vq;
struct vhost_net_virtqueue *nvq = &net->vqs[VHOST_NET_VQ_TX];
struct vhost_virtqueue *vq = &nvq->vq;
unsigned out, in, s;
int head;
struct msghdr msg = {
......@@ -329,7 +337,7 @@ static void handle_tx(struct vhost_net *net)
mutex_lock(&vq->mutex);
vhost_disable_notify(&net->dev, vq);
hdr_size = vq->vhost_hlen;
hdr_size = nvq->vhost_hlen;
zcopy = nvq->ubufs;
for (;;) {
......@@ -369,14 +377,14 @@ static void handle_tx(struct vhost_net *net)
break;
}
/* Skip header. TODO: support TSO. */
s = move_iovec_hdr(vq->iov, vq->hdr, hdr_size, out);
s = move_iovec_hdr(vq->iov, nvq->hdr, hdr_size, out);
msg.msg_iovlen = out;
len = iov_length(vq->iov, out);
/* Sanity check */
if (!len) {
vq_err(vq, "Unexpected header len for TX: "
"%zd expected %zd\n",
iov_length(vq->hdr, s), hdr_size);
iov_length(nvq->hdr, s), hdr_size);
break;
}
zcopy_used = zcopy && (len >= VHOST_GOODCOPY_LEN ||
......@@ -523,7 +531,8 @@ static int get_rx_bufs(struct vhost_virtqueue *vq,
* read-size critical section for our kind of RCU. */
static void handle_rx(struct vhost_net *net)
{
struct vhost_virtqueue *vq = &net->vqs[VHOST_NET_VQ_RX].vq;
struct vhost_net_virtqueue *nvq = &net->vqs[VHOST_NET_VQ_RX];
struct vhost_virtqueue *vq = &nvq->vq;
unsigned uninitialized_var(in), log;
struct vhost_log *vq_log;
struct msghdr msg = {
......@@ -551,8 +560,8 @@ static void handle_rx(struct vhost_net *net)
mutex_lock(&vq->mutex);
vhost_disable_notify(&net->dev, vq);
vhost_hlen = vq->vhost_hlen;
sock_hlen = vq->sock_hlen;
vhost_hlen = nvq->vhost_hlen;
sock_hlen = nvq->sock_hlen;
vq_log = unlikely(vhost_has_feature(&net->dev, VHOST_F_LOG_ALL)) ?
vq->log : NULL;
......@@ -582,11 +591,11 @@ static void handle_rx(struct vhost_net *net)
/* We don't need to be notified again. */
if (unlikely((vhost_hlen)))
/* Skip header. TODO: support TSO. */
move_iovec_hdr(vq->iov, vq->hdr, vhost_hlen, in);
move_iovec_hdr(vq->iov, nvq->hdr, vhost_hlen, in);
else
/* Copy the header for use in VIRTIO_NET_F_MRG_RXBUF:
* needed because recvmsg can modify msg_iov. */
copy_iovec_hdr(vq->iov, vq->hdr, sock_hlen, in);
copy_iovec_hdr(vq->iov, nvq->hdr, sock_hlen, in);
msg.msg_iovlen = in;
err = sock->ops->recvmsg(NULL, sock, &msg,
sock_len, MSG_DONTWAIT | MSG_TRUNC);
......@@ -600,7 +609,7 @@ static void handle_rx(struct vhost_net *net)
continue;
}
if (unlikely(vhost_hlen) &&
memcpy_toiovecend(vq->hdr, (unsigned char *)&hdr, 0,
memcpy_toiovecend(nvq->hdr, (unsigned char *)&hdr, 0,
vhost_hlen)) {
vq_err(vq, "Unable to write vnet_hdr at addr %p\n",
vq->iov->iov_base);
......@@ -608,7 +617,7 @@ static void handle_rx(struct vhost_net *net)
}
/* TODO: Should check and handle checksum. */
if (likely(mergeable) &&
memcpy_toiovecend(vq->hdr, (unsigned char *)&headcount,
memcpy_toiovecend(nvq->hdr, (unsigned char *)&headcount,
offsetof(typeof(hdr), num_buffers),
sizeof hdr.num_buffers)) {
vq_err(vq, "Failed num_buffers write");
......@@ -686,6 +695,8 @@ static int vhost_net_open(struct inode *inode, struct file *f)
n->vqs[i].ubuf_info = NULL;
n->vqs[i].upend_idx = 0;
n->vqs[i].done_idx = 0;
n->vqs[i].vhost_hlen = 0;
n->vqs[i].sock_hlen = 0;
}
r = vhost_dev_init(dev, vqs, VHOST_NET_VQ_MAX);
if (r < 0) {
......@@ -783,7 +794,7 @@ static int vhost_net_release(struct inode *inode, struct file *f)
vhost_net_flush(n);
vhost_dev_stop(&n->dev);
vhost_dev_cleanup(&n->dev, false);
vhost_net_reset_ubuf_info(n);
vhost_net_vq_reset(n);
if (tx_sock)
fput(tx_sock->file);
if (rx_sock)
......@@ -964,7 +975,7 @@ static long vhost_net_reset_owner(struct vhost_net *n)
vhost_net_stop(n, &tx_sock, &rx_sock);
vhost_net_flush(n);
err = vhost_dev_reset_owner(&n->dev);
vhost_net_reset_ubuf_info(n);
vhost_net_vq_reset(n);
done:
mutex_unlock(&n->dev.mutex);
if (tx_sock)
......@@ -1001,8 +1012,8 @@ static int vhost_net_set_features(struct vhost_net *n, u64 features)
smp_wmb();
for (i = 0; i < VHOST_NET_VQ_MAX; ++i) {
mutex_lock(&n->vqs[i].vq.mutex);
n->vqs[i].vq.vhost_hlen = vhost_hlen;
n->vqs[i].vq.sock_hlen = sock_hlen;
n->vqs[i].vhost_hlen = vhost_hlen;
n->vqs[i].sock_hlen = sock_hlen;
mutex_unlock(&n->vqs[i].vq.mutex);
}
vhost_net_flush(n);
......
......@@ -179,8 +179,6 @@ static void vhost_vq_reset(struct vhost_dev *dev,
vq->used_flags = 0;
vq->log_used = false;
vq->log_addr = -1ull;
vq->vhost_hlen = 0;
vq->sock_hlen = 0;
vq->private_data = NULL;
vq->log_base = NULL;
vq->error_ctx = NULL;
......
......@@ -102,10 +102,7 @@ struct vhost_virtqueue {
/* hdr is used to store the virtio header.
* Since each iovec has >= 1 byte length, we never need more than
* header length entries to store the header. */
struct iovec hdr[sizeof(struct virtio_net_hdr_mrg_rxbuf)];
struct iovec *indirect;
size_t vhost_hlen;
size_t sock_hlen;
struct vring_used_elem *heads;
/* We use a kind of RCU to access private pointer.
* All readers access it from worker, which makes it possible to
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册