Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 81d6724a 编写于 作者: R Russell King
浏览文件
操作

ARM: PNX4008: Use i2c driver data for passing between internal functions 

Since the drivers data now contains the i2c adapter structure, we can
pass around the drivers data between internal functions (which is what
they want) rather than using the i2c adapter structure and having an
additional pointer dereference each time.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 9d7f7363
隐藏空白更改
内联 并排
Showing with 62 addition and 70 deletion
drivers/i2c/busses/i2c-pnx.c
浏览文件 @ 81d6724a
......@@ -52,10 +52,9 @@ static inline int wait_reset(long timeout, struct i2c_pnx_algo_data *data)
return (timeout <= 0);
}
static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap)
static inline void i2c_pnx_arm_timer(struct i2c_pnx_algo_data *alg_data)
{
struct i2c_pnx_algo_data *data = adap->algo_data;
struct timer_list *timer = &data->mif.timer;
struct timer_list *timer = &alg_data->mif.timer;
int expires = I2C_PNX_TIMEOUT / (1000 / HZ);
if (expires <= 1)
......@@ -63,11 +62,11 @@ static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap)
del_timer_sync(timer);
dev_dbg(&adap->dev, "Timer armed at %lu plus %u jiffies.\n",
dev_dbg(&alg_data->adapter.dev, "Timer armed at %lu plus %u jiffies.\n",
jiffies, expires);
timer->expires = jiffies + expires;
timer->data = (unsigned long)adap;
timer->data = (unsigned long)&alg_data;
add_timer(timer);
}
......@@ -79,34 +78,33 @@ static inline void i2c_pnx_arm_timer(struct i2c_adapter *adap)
*
* Generate a START signal in the desired mode.
*/
static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap)
static int i2c_pnx_start(unsigned char slave_addr,
struct i2c_pnx_algo_data *alg_data)
{
struct i2c_pnx_algo_data *alg_data = adap->algo_data;
dev_dbg(&adap->dev, "%s(): addr 0x%x mode %d\n", __func__,
dev_dbg(&alg_data->adapter.dev, "%s(): addr 0x%x mode %d\n", __func__,
slave_addr, alg_data->mif.mode);
/* Check for 7 bit slave addresses only */
if (slave_addr & ~0x7f) {
dev_err(&adap->dev, "%s: Invalid slave address %x. "
dev_err(&alg_data->adapter.dev, "%s: Invalid slave address %x. "
"Only 7-bit addresses are supported\n",
adap->name, slave_addr);
alg_data->adapter.name, slave_addr);
return -EINVAL;
}
/* First, make sure bus is idle */
if (wait_timeout(I2C_PNX_TIMEOUT, alg_data)) {
/* Somebody else is monopolizing the bus */
dev_err(&adap->dev, "%s: Bus busy. Slave addr = %02x, "
dev_err(&alg_data->adapter.dev, "%s: Bus busy. Slave addr = %02x, "
"cntrl = %x, stat = %x\n",
adap->name, slave_addr,
alg_data->adapter.name, slave_addr,
ioread32(I2C_REG_CTL(alg_data)),
ioread32(I2C_REG_STS(alg_data)));
return -EBUSY;
} else if (ioread32(I2C_REG_STS(alg_data)) & mstatus_afi) {
/* Sorry, we lost the bus */
dev_err(&adap->dev, "%s: Arbitration failure. "
"Slave addr = %02x\n", adap->name, slave_addr);
dev_err(&alg_data->adapter.dev, "%s: Arbitration failure. "
"Slave addr = %02x\n", alg_data->adapter.name, slave_addr);
return -EIO;
}
......@@ -117,14 +115,14 @@ static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap)
iowrite32(ioread32(I2C_REG_STS(alg_data)) | mstatus_tdi | mstatus_afi,
I2C_REG_STS(alg_data));
dev_dbg(&adap->dev, "%s(): sending %#x\n", __func__,
dev_dbg(&alg_data->adapter.dev, "%s(): sending %#x\n", __func__,
(slave_addr << 1) | start_bit | alg_data->mif.mode);
/* Write the slave address, START bit and R/W bit */
iowrite32((slave_addr << 1) | start_bit | alg_data->mif.mode,
I2C_REG_TX(alg_data));
dev_dbg(&adap->dev, "%s(): exit\n", __func__);
dev_dbg(&alg_data->adapter.dev, "%s(): exit\n", __func__);
return 0;
}
......@@ -135,13 +133,12 @@ static int i2c_pnx_start(unsigned char slave_addr, struct i2c_adapter *adap)
*
* Generate a STOP signal to terminate the master transaction.
*/
static void i2c_pnx_stop(struct i2c_adapter *adap)
static void i2c_pnx_stop(struct i2c_pnx_algo_data *alg_data)
{
struct i2c_pnx_algo_data *alg_data = adap->algo_data;
/* Only 1 msec max timeout due to interrupt context */
long timeout = 1000;
dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
/* Write a STOP bit to TX FIFO */
......@@ -155,7 +152,7 @@ static void i2c_pnx_stop(struct i2c_adapter *adap)
timeout--;
}
dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
}
......@@ -165,12 +162,11 @@ static void i2c_pnx_stop(struct i2c_adapter *adap)
*
* Sends one byte of data to the slave
*/
static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data)
{
struct i2c_pnx_algo_data *alg_data = adap->algo_data;
u32 val;
dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
if (alg_data->mif.len > 0) {
......@@ -186,14 +182,14 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
alg_data->mif.len--;
iowrite32(val, I2C_REG_TX(alg_data));
dev_dbg(&adap->dev, "%s(): xmit %#x [%d]\n", __func__,
dev_dbg(&alg_data->adapter.dev, "%s(): xmit %#x [%d]\n", __func__,
val, alg_data->mif.len + 1);
if (alg_data->mif.len == 0) {
if (alg_data->last) {
/* Wait until the STOP is seen. */
if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
dev_err(&adap->dev, "The bus is still "
dev_err(&alg_data->adapter.dev, "The bus is still "
"active after timeout\n");
}
/* Disable master interrupts */
......@@ -203,14 +199,14 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
del_timer_sync(&alg_data->mif.timer);
dev_dbg(&adap->dev, "%s(): Waking up xfer routine.\n",
dev_dbg(&alg_data->adapter.dev, "%s(): Waking up xfer routine.\n",
__func__);
complete(&alg_data->mif.complete);
}
} else if (alg_data->mif.len == 0) {
/* zero-sized transfer */
i2c_pnx_stop(adap);
i2c_pnx_stop(alg_data);
/* Disable master interrupts. */
iowrite32(ioread32(I2C_REG_CTL(alg_data)) &
......@@ -219,13 +215,13 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
/* Stop timer. */
del_timer_sync(&alg_data->mif.timer);
dev_dbg(&adap->dev, "%s(): Waking up xfer routine after "
dev_dbg(&alg_data->adapter.dev, "%s(): Waking up xfer routine after "
"zero-xfer.\n", __func__);
complete(&alg_data->mif.complete);
}
dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
return 0;
......@@ -237,20 +233,19 @@ static int i2c_pnx_master_xmit(struct i2c_adapter *adap)
*
* Reads one byte data from the slave
*/
static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
{
struct i2c_pnx_algo_data *alg_data = adap->algo_data;
unsigned int val = 0;
u32 ctl = 0;
dev_dbg(&adap->dev, "%s(): entering: stat = %04x.\n",
dev_dbg(&alg_data->adapter.dev, "%s(): entering: stat = %04x.\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
/* Check, whether there is already data,
* or we didn't 'ask' for it yet.
*/
if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
dev_dbg(&adap->dev, "%s(): Write dummy data to fill "
dev_dbg(&alg_data->adapter.dev, "%s(): Write dummy data to fill "
"Rx-fifo...\n", __func__);
if (alg_data->mif.len == 1) {
......@@ -283,7 +278,7 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
if (alg_data->mif.len > 0) {
val = ioread32(I2C_REG_RX(alg_data));
*alg_data->mif.buf++ = (u8) (val & 0xff);
dev_dbg(&adap->dev, "%s(): rcv 0x%x [%d]\n", __func__, val,
dev_dbg(&alg_data->adapter.dev, "%s(): rcv 0x%x [%d]\n", __func__, val,
alg_data->mif.len);
alg_data->mif.len--;
......@@ -291,7 +286,7 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
if (alg_data->last)
/* Wait until the STOP is seen. */
if (wait_timeout(I2C_PNX_TIMEOUT, alg_data))
dev_err(&adap->dev, "The bus is still "
dev_err(&alg_data->adapter.dev, "The bus is still "
"active after timeout\n");
/* Disable master interrupts */
......@@ -306,7 +301,7 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
}
}
dev_dbg(&adap->dev, "%s(): exiting: stat = %04x.\n",
dev_dbg(&alg_data->adapter.dev, "%s(): exiting: stat = %04x.\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
return 0;
......@@ -314,11 +309,10 @@ static int i2c_pnx_master_rcv(struct i2c_adapter *adap)
static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
{
struct i2c_pnx_algo_data *alg_data = dev_id;
u32 stat, ctl;
struct i2c_adapter *adap = dev_id;
struct i2c_pnx_algo_data *alg_data = adap->algo_data;
dev_dbg(&adap->dev, "%s(): mstat = %x mctrl = %x, mode = %d\n",
dev_dbg(&alg_data->adapter.dev, "%s(): mstat = %x mctrl = %x, mode = %d\n",
__func__,
ioread32(I2C_REG_STS(alg_data)),
ioread32(I2C_REG_CTL(alg_data)),
......@@ -341,10 +335,10 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
complete(&alg_data->mif.complete);
} else if (stat & mstatus_nai) {
/* Slave did not acknowledge, generate a STOP */
dev_dbg(&adap->dev, "%s(): "
dev_dbg(&alg_data->adapter.dev, "%s(): "
"Slave did not acknowledge, generating a STOP.\n",
__func__);
i2c_pnx_stop(adap);
i2c_pnx_stop(alg_data);
/* Disable master interrupts. */
ctl = ioread32(I2C_REG_CTL(alg_data));
......@@ -370,9 +364,9 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
*/
if ((stat & mstatus_drmi) || !(stat & mstatus_rfe)) {
if (alg_data->mif.mode == I2C_SMBUS_WRITE) {
i2c_pnx_master_xmit(adap);
i2c_pnx_master_xmit(alg_data);
} else if (alg_data->mif.mode == I2C_SMBUS_READ) {
i2c_pnx_master_rcv(adap);
i2c_pnx_master_rcv(alg_data);
}
}
}
......@@ -381,7 +375,7 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
stat = ioread32(I2C_REG_STS(alg_data));
iowrite32(stat | mstatus_tdi | mstatus_afi, I2C_REG_STS(alg_data));
dev_dbg(&adap->dev, "%s(): exiting, stat = %x ctrl = %x.\n",
dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x ctrl = %x.\n",
__func__, ioread32(I2C_REG_STS(alg_data)),
ioread32(I2C_REG_CTL(alg_data)));
......@@ -390,11 +384,10 @@ static irqreturn_t i2c_pnx_interrupt(int irq, void *dev_id)
static void i2c_pnx_timeout(unsigned long data)
{
struct i2c_adapter *adap = (struct i2c_adapter *)data;
struct i2c_pnx_algo_data *alg_data = adap->algo_data;
struct i2c_pnx_algo_data *alg_data = (struct i2c_pnx_algo_data *)data;
u32 ctl;
dev_err(&adap->dev, "Master timed out. stat = %04x, cntrl = %04x. "
dev_err(&alg_data->adapter.dev, "Master timed out. stat = %04x, cntrl = %04x. "
"Resetting master...\n",
ioread32(I2C_REG_STS(alg_data)),
ioread32(I2C_REG_CTL(alg_data)));
......@@ -411,15 +404,14 @@ static void i2c_pnx_timeout(unsigned long data)
complete(&alg_data->mif.complete);
}
static inline void bus_reset_if_active(struct i2c_adapter *adap)
static inline void bus_reset_if_active(struct i2c_pnx_algo_data *alg_data)
{
struct i2c_pnx_algo_data *alg_data = adap->algo_data;
u32 stat;
if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_active) {
dev_err(&adap->dev,
dev_err(&alg_data->adapter.dev,
"%s: Bus is still active after xfer. Reset it...\n",
adap->name);
alg_data->adapter.name);
iowrite32(ioread32(I2C_REG_CTL(alg_data)) | mcntrl_reset,
I2C_REG_CTL(alg_data));
wait_reset(I2C_PNX_TIMEOUT, alg_data);
......@@ -453,10 +445,10 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
struct i2c_pnx_algo_data *alg_data = adap->algo_data;
u32 stat = ioread32(I2C_REG_STS(alg_data));
dev_dbg(&adap->dev, "%s(): entering: %d messages, stat = %04x.\n",
dev_dbg(&alg_data->adapter.dev, "%s(): entering: %d messages, stat = %04x.\n",
__func__, num, ioread32(I2C_REG_STS(alg_data)));
bus_reset_if_active(adap);
bus_reset_if_active(alg_data);
/* Process transactions in a loop. */
for (i = 0; rc >= 0 && i < num; i++) {
......@@ -466,9 +458,9 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
addr = pmsg->addr;
if (pmsg->flags & I2C_M_TEN) {
dev_err(&adap->dev,
dev_err(&alg_data->adapter.dev,
"%s: 10 bits addr not supported!\n",
adap->name);
alg_data->adapter.name);
rc = -EINVAL;
break;
}
......@@ -480,11 +472,11 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
alg_data->mif.ret = 0;
alg_data->last = (i == num - 1);
dev_dbg(&adap->dev, "%s(): mode %d, %d bytes\n", __func__,
dev_dbg(&alg_data->adapter.dev, "%s(): mode %d, %d bytes\n", __func__,
alg_data->mif.mode,
alg_data->mif.len);
i2c_pnx_arm_timer(adap);
i2c_pnx_arm_timer(alg_data);
/* initialize the completion var */
init_completion(&alg_data->mif.complete);
......@@ -495,7 +487,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
I2C_REG_CTL(alg_data));
/* Put start-code and slave-address on the bus. */
rc = i2c_pnx_start(addr, adap);
rc = i2c_pnx_start(addr, alg_data);
if (rc < 0)
break;
......@@ -504,31 +496,31 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
if (!(rc = alg_data->mif.ret))
completed++;
dev_dbg(&adap->dev, "%s(): Complete, return code = %d.\n",
dev_dbg(&alg_data->adapter.dev, "%s(): Complete, return code = %d.\n",
__func__, rc);
/* Clear TDI and AFI bits in case they are set. */
if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_tdi) {
dev_dbg(&adap->dev,
dev_dbg(&alg_data->adapter.dev,
"%s: TDI still set... clearing now.\n",
adap->name);
alg_data->adapter.name);
iowrite32(stat, I2C_REG_STS(alg_data));
}
if ((stat = ioread32(I2C_REG_STS(alg_data))) & mstatus_afi) {
dev_dbg(&adap->dev,
dev_dbg(&alg_data->adapter.dev,
"%s: AFI still set... clearing now.\n",
adap->name);
alg_data->adapter.name);
iowrite32(stat, I2C_REG_STS(alg_data));
}
}
bus_reset_if_active(adap);
bus_reset_if_active(alg_data);
/* Cleanup to be sure... */
alg_data->mif.buf = NULL;
alg_data->mif.len = 0;
dev_dbg(&adap->dev, "%s(): exiting, stat = %x\n",
dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
if (completed != num)
......@@ -609,7 +601,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
init_timer(&alg_data->mif.timer);
alg_data->mif.timer.function = i2c_pnx_timeout;
alg_data->mif.timer.data = (unsigned long)&alg_data->adapter;
alg_data->mif.timer.data = (unsigned long)alg_data;
/* Register I/O resource */
if (!request_mem_region(i2c_pnx->base, I2C_PNX_REGION_SIZE,
......@@ -657,7 +649,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
init_completion(&alg_data->mif.complete);
ret = request_irq(i2c_pnx->irq, i2c_pnx_interrupt,
0, pdev->name, &alg_data->adapter);
0, pdev->name, alg_data);
if (ret)
goto out_clock;
......@@ -674,7 +666,7 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
return 0;
out_irq:
free_irq(i2c_pnx->irq, &alg_data->adapter);
free_irq(i2c_pnx->irq, alg_data);
out_clock:
clk_disable(alg_data->clk);
out_unmap:
......@@ -696,7 +688,7 @@ static int __devexit i2c_pnx_remove(struct platform_device *pdev)
struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
struct i2c_pnx_data *i2c_pnx = alg_data->i2c_pnx;
free_irq(i2c_pnx->irq, &alg_data->adapter);
free_irq(i2c_pnx->irq, alg_data);
i2c_del_adapter(&alg_data->adapter);
clk_disable(alg_data->clk);
iounmap(alg_data->ioaddr);
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或