提交 81d3dbde 编写于 作者: T Tobin Davis 提交者: Jaroslav Kysela

[ALSA] hda-codec - Add support for new Intel boards with Stac9227 codec

This patch adds full 5.1 audio support for Intel boards
with the SigmaTel 9227 codec chip (946, 963, 965 series).
Signed-off-by: NTobin Davis <tobinx.b.davis@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>
上级 948a4db2
......@@ -377,18 +377,11 @@ static unsigned int d945gtp5_pin_configs[10] = {
0x02a19320, 0x40000100,
};
static unsigned int d965_2112_pin_configs[10] = {
0x0221401f, 0x40000100, 0x40000100, 0x01014011,
0x01a19021, 0x01813024, 0x01452130, 0x40000100,
0x02a19320, 0x40000100,
};
static unsigned int *stac922x_brd_tbl[STAC_922X_MODELS] = {
[STAC_REF] = ref922x_pin_configs,
[STAC_D945GTP3] = d945gtp3_pin_configs,
[STAC_D945GTP5] = d945gtp5_pin_configs,
[STAC_MACMINI] = d945gtp5_pin_configs,
[STAC_D965_2112] = d965_2112_pin_configs,
};
static struct hda_board_config stac922x_cfg_tbl[] = {
......@@ -493,8 +486,16 @@ static unsigned int ref927x_pin_configs[14] = {
0x01c41030, 0x40000100,
};
static unsigned int d965_2112_pin_configs[14] = {
0x0221401f, 0x02a19120, 0x40000100, 0x01014011,
0x01a19021, 0x01813024, 0x40000100, 0x40000100,
0x40000100, 0x40000100, 0x40000100, 0x40000100,
0x40000100, 0x40000100
};
static unsigned int *stac927x_brd_tbl[] = {
ref927x_pin_configs,
[STAC_REF] = ref927x_pin_configs,
[STAC_D965_2112] = d965_2112_pin_configs,
};
static struct hda_board_config stac927x_cfg_tbl[] = {
......@@ -502,6 +503,66 @@ static struct hda_board_config stac927x_cfg_tbl[] = {
.pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x2668, /* DFI LanParty */
.config = STAC_REF }, /* SigmaTel reference board */
/* SigmaTel 9227 reference board */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x284b,
.config = STAC_D965_284B },
/* Intel 946 based systems */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x3d01,
.config = STAC_D965_2112 }, /* D946 configuration */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0xa301,
.config = STAC_D965_2112 }, /* Intel D946GZT - 3 stack */
/* 965 based systems */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x2116,
.config = STAC_D965_2112 }, /* Intel D965 3Stack config */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x2115,
.config = STAC_D965_2112 }, /* Intel DQ965WC - 3 Stack */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x2114,
.config = STAC_D965_2112 }, /* Intel D965 3Stack config */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x2113,
.config = STAC_D965_2112 }, /* Intel D965 3Stack config */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x2112,
.config = STAC_D965_2112 }, /* Intel DG965MS - 3 Stack */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x2111,
.config = STAC_D965_2112 }, /* Intel D965 3Stack config */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x2110,
.config = STAC_D965_2112 }, /* Intel D965 3Stack config */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x2009,
.config = STAC_D965_2112 }, /* Intel D965 3Stack config */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x2008,
.config = STAC_D965_2112 }, /* Intel DQ965GF - 3 Stack */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x2007,
.config = STAC_D965_2112 }, /* Intel D965 3Stack config */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x2006,
.config = STAC_D965_2112 }, /* Intel D965 3Stack config */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x2005,
.config = STAC_D965_2112 }, /* Intel D965 3Stack config */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x2004,
.config = STAC_D965_2112 }, /* Intel D965 3Stack config */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x2003,
.config = STAC_D965_2112 }, /* Intel D965 3Stack config */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x2002,
.config = STAC_D965_2112 }, /* Intel D965 3Stack config */
{ .pci_subvendor = PCI_VENDOR_ID_INTEL,
.pci_subdevice = 0x2001,
.config = STAC_D965_2112 }, /* Intel DQ965GF - 3 Stackg */
{} /* terminator */
};
......@@ -1391,25 +1452,6 @@ static int patch_stac922x(struct hda_codec *codec)
spec->multiout.dac_nids = spec->dac_nids;
switch (spec->board_config) {
case STAC_D965_2112:
spec->adc_nids = stac9227_adc_nids;
spec->mux_nids = stac9227_mux_nids;
#if 0
spec->multiout.dac_nids = d965_2112_dac_nids;
spec->multiout.num_dacs = ARRAY_SIZE(d965_2112_dac_nids);
#endif
spec->init = d965_2112_core_init;
spec->mixer = stac9227_mixer;
break;
case STAC_D965_284B:
spec->adc_nids = stac9227_adc_nids;
spec->mux_nids = stac9227_mux_nids;
spec->init = stac9227_core_init;
spec->mixer = stac9227_mixer;
break;
}
err = stac92xx_parse_auto_config(codec, 0x08, 0x09);
if (err < 0) {
stac92xx_free(codec);
......@@ -1437,19 +1479,35 @@ static int patch_stac927x(struct hda_codec *codec)
spec->board_config = snd_hda_check_board_config(codec, stac927x_cfg_tbl);
if (spec->board_config < 0)
snd_printdd(KERN_INFO "hda_codec: Unknown model for STAC927x, using BIOS defaults\n");
else {
else if (stac927x_brd_tbl[spec->board_config] != NULL) {
spec->num_pins = 14;
spec->pin_nids = stac927x_pin_nids;
spec->pin_configs = stac927x_brd_tbl[spec->board_config];
stac92xx_set_config_regs(codec);
}
spec->adc_nids = stac927x_adc_nids;
spec->mux_nids = stac927x_mux_nids;
spec->num_muxes = 3;
spec->init = stac927x_core_init;
spec->mixer = stac927x_mixer;
switch (spec->board_config) {
case STAC_D965_2112:
spec->adc_nids = stac927x_adc_nids;
spec->mux_nids = stac927x_mux_nids;
spec->num_muxes = 3;
spec->init = d965_2112_core_init;
spec->mixer = stac9227_mixer;
break;
case STAC_D965_284B:
spec->adc_nids = stac9227_adc_nids;
spec->mux_nids = stac9227_mux_nids;
spec->num_muxes = 2;
spec->init = stac9227_core_init;
spec->mixer = stac9227_mixer;
break;
default:
spec->adc_nids = stac927x_adc_nids;
spec->mux_nids = stac927x_mux_nids;
spec->num_muxes = 3;
spec->init = stac927x_core_init;
spec->mixer = stac927x_mixer;
}
spec->multiout.dac_nids = spec->dac_nids;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册