ufs-qcom: add support for Qualcomm Technologies Inc platforms

This change adds support for Qualcomm Technologies Inc platforms that
use UFS driver. for example, it adds :
- PM specific operations during hibern8, suspend, resume, clock setup
- qcom-ufs generic phy driver initialization, calibration,
  power-on/off sequence, etc.
- UFS Controller specific configuration
- Rate, Gear, Mode negotiation between device and controller
Signed-off-by: NYaniv Gardi <ygardi@codeaurora.org>
Reviewed-by: NDov Levenglick <dovl@codeaurora.org>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

drivers/scsi/ufs/Kconfig

@@ -70,3 +70,16 @@ config SCSI_UFSHCD_PLATFORM
 	If you have a controller with this interface, say Y or M here.
 
 	  If unsure, say N.
+
+config SCSI_UFS_QCOM
+	bool "QCOM specific hooks to UFS controller platform driver"
+	depends on SCSI_UFSHCD_PLATFORM && ARCH_MSM
+	select PHY_QCOM_UFS
+	help
+	  This selects the QCOM specific additions to UFSHCD platform driver.
+	  UFS host on QCOM needs some vendor specific configuration before
+	  accessing the hardware which includes PHY configuration and vendor
+	  specific registers.
+
+	  Select this if you have UFS controller on QCOM chipset.
+	  If unsure, say N.

drivers/scsi/ufs/Makefile

 # UFSHCD makefile
+obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
 obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
 obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
 obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o

drivers/scsi/ufs/ufs-qcom.h

+/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFS_QCOM_H_
+#define UFS_QCOM_H_
+
+#define MAX_UFS_QCOM_HOSTS	1
+#define MAX_U32                 (~(u32)0)
+#define MPHY_TX_FSM_STATE       0x41
+#define TX_FSM_HIBERN8          0x1
+#define HBRN8_POLL_TOUT_MS      100
+#define DEFAULT_CLK_RATE_HZ     1000000
+#define BUS_VECTOR_NAME_LEN     32
+
+#define UFS_HW_VER_MAJOR_SHFT	(28)
+#define UFS_HW_VER_MAJOR_MASK	(0x000F << UFS_HW_VER_MAJOR_SHFT)
+#define UFS_HW_VER_MINOR_SHFT	(16)
+#define UFS_HW_VER_MINOR_MASK	(0x0FFF << UFS_HW_VER_MINOR_SHFT)
+#define UFS_HW_VER_STEP_SHFT	(0)
+#define UFS_HW_VER_STEP_MASK	(0xFFFF << UFS_HW_VER_STEP_SHFT)
+
+/* vendor specific pre-defined parameters */
+#define SLOW 1
+#define FAST 2
+
+#define UFS_QCOM_LIMIT_NUM_LANES_RX	2
+#define UFS_QCOM_LIMIT_NUM_LANES_TX	2
+#define UFS_QCOM_LIMIT_HSGEAR_RX	UFS_HS_G2
+#define UFS_QCOM_LIMIT_HSGEAR_TX	UFS_HS_G2
+#define UFS_QCOM_LIMIT_PWMGEAR_RX	UFS_PWM_G4
+#define UFS_QCOM_LIMIT_PWMGEAR_TX	UFS_PWM_G4
+#define UFS_QCOM_LIMIT_RX_PWR_PWM	SLOW_MODE
+#define UFS_QCOM_LIMIT_TX_PWR_PWM	SLOW_MODE
+#define UFS_QCOM_LIMIT_RX_PWR_HS	FAST_MODE
+#define UFS_QCOM_LIMIT_TX_PWR_HS	FAST_MODE
+#define UFS_QCOM_LIMIT_HS_RATE		PA_HS_MODE_B
+#define UFS_QCOM_LIMIT_DESIRED_MODE	FAST
+
+/* QCOM UFS host controller vendor specific registers */
+enum {
+	REG_UFS_SYS1CLK_1US                 = 0xC0,
+	REG_UFS_TX_SYMBOL_CLK_NS_US         = 0xC4,
+	REG_UFS_LOCAL_PORT_ID_REG           = 0xC8,
+	REG_UFS_PA_ERR_CODE                 = 0xCC,
+	REG_UFS_RETRY_TIMER_REG             = 0xD0,
+	REG_UFS_PA_LINK_STARTUP_TIMER       = 0xD8,
+	REG_UFS_CFG1                        = 0xDC,
+	REG_UFS_CFG2                        = 0xE0,
+	REG_UFS_HW_VERSION                  = 0xE4,
+
+	UFS_DBG_RD_REG_UAWM			= 0x100,
+	UFS_DBG_RD_REG_UARM			= 0x200,
+	UFS_DBG_RD_REG_TXUC			= 0x300,
+	UFS_DBG_RD_REG_RXUC			= 0x400,
+	UFS_DBG_RD_REG_DFC			= 0x500,
+	UFS_DBG_RD_REG_TRLUT			= 0x600,
+	UFS_DBG_RD_REG_TMRLUT			= 0x700,
+	UFS_UFS_DBG_RD_REG_OCSC			= 0x800,
+
+	UFS_UFS_DBG_RD_DESC_RAM			= 0x1500,
+	UFS_UFS_DBG_RD_PRDT_RAM			= 0x1700,
+	UFS_UFS_DBG_RD_RESP_RAM			= 0x1800,
+	UFS_UFS_DBG_RD_EDTL_RAM			= 0x1900,
+};
+
+/* bit definitions for REG_UFS_CFG2 register */
+#define UAWM_HW_CGC_EN		(1 << 0)
+#define UARM_HW_CGC_EN		(1 << 1)
+#define TXUC_HW_CGC_EN		(1 << 2)
+#define RXUC_HW_CGC_EN		(1 << 3)
+#define DFC_HW_CGC_EN		(1 << 4)
+#define TRLUT_HW_CGC_EN		(1 << 5)
+#define TMRLUT_HW_CGC_EN	(1 << 6)
+#define OCSC_HW_CGC_EN		(1 << 7)
+
+#define REG_UFS_CFG2_CGC_EN_ALL (UAWM_HW_CGC_EN | UARM_HW_CGC_EN |\
+				 TXUC_HW_CGC_EN | RXUC_HW_CGC_EN |\
+				 DFC_HW_CGC_EN | TRLUT_HW_CGC_EN |\
+				 TMRLUT_HW_CGC_EN | OCSC_HW_CGC_EN)
+
+/* bit offset */
+enum {
+	OFFSET_UFS_PHY_SOFT_RESET           = 1,
+	OFFSET_CLK_NS_REG                   = 10,
+};
+
+/* bit masks */
+enum {
+	MASK_UFS_PHY_SOFT_RESET             = 0x2,
+	MASK_TX_SYMBOL_CLK_1US_REG          = 0x3FF,
+	MASK_CLK_NS_REG                     = 0xFFFC00,
+};
+
+enum ufs_qcom_phy_init_type {
+	UFS_PHY_INIT_FULL,
+	UFS_PHY_INIT_CFG_RESTORE,
+};
+
+static inline void
+ufs_qcom_get_controller_revision(struct ufs_hba *hba,
+				 u8 *major, u16 *minor, u16 *step)
+{
+	u32 ver = ufshcd_readl(hba, REG_UFS_HW_VERSION);
+
+	*major = (ver & UFS_HW_VER_MAJOR_MASK) >> UFS_HW_VER_MAJOR_SHFT;
+	*minor = (ver & UFS_HW_VER_MINOR_MASK) >> UFS_HW_VER_MINOR_SHFT;
+	*step = (ver & UFS_HW_VER_STEP_MASK) >> UFS_HW_VER_STEP_SHFT;
+};
+
+static inline void ufs_qcom_assert_reset(struct ufs_hba *hba)
+{
+	ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET,
+			1 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1);
+
+	/*
+	 * Make sure assertion of ufs phy reset is written to
+	 * register before returning
+	 */
+	mb();
+}
+
+static inline void ufs_qcom_deassert_reset(struct ufs_hba *hba)
+{
+	ufshcd_rmwl(hba, MASK_UFS_PHY_SOFT_RESET,
+			0 << OFFSET_UFS_PHY_SOFT_RESET, REG_UFS_CFG1);
+
+	/*
+	 * Make sure de-assertion of ufs phy reset is written to
+	 * register before returning
+	 */
+	mb();
+}
+
+struct ufs_qcom_bus_vote {
+	uint32_t client_handle;
+	uint32_t curr_vote;
+	int min_bw_vote;
+	int max_bw_vote;
+	int saved_vote;
+	bool is_max_bw_needed;
+	struct device_attribute max_bus_bw;
+};
+
+struct ufs_qcom_host {
+	struct phy *generic_phy;
+	struct ufs_hba *hba;
+	struct ufs_qcom_bus_vote bus_vote;
+	struct ufs_pa_layer_attr dev_req_params;
+	struct clk *rx_l0_sync_clk;
+	struct clk *tx_l0_sync_clk;
+	struct clk *rx_l1_sync_clk;
+	struct clk *tx_l1_sync_clk;
+	bool is_lane_clks_enabled;
+};
+
+#define ufs_qcom_is_link_off(hba) ufshcd_is_link_off(hba)
+#define ufs_qcom_is_link_active(hba) ufshcd_is_link_active(hba)
+#define ufs_qcom_is_link_hibern8(hba) ufshcd_is_link_hibern8(hba)
+
+#endif /* UFS_QCOM_H_ */