ethtool: Clean up definitions of rule location arrays in RX NFC

Correct the description of ethtool_rxnfc::rule_locs; it is an array
of currently used locations, not all possible valid locations.

Add note that drivers must not use ethtool_rxnfc::rule_locs.

The rule_locs argument to ethtool_ops::get_rxnfc is either NULL or a
pointer to an array of u32, so change the parameter type accordingly.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c

@@ -2241,7 +2241,7 @@ static int bnx2x_set_phys_id(struct net_device *dev,
 }
 
 static int bnx2x_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info,
-			   void *rules __always_unused)
+			   u32 *rules __always_unused)
 {
 	struct bnx2x *bp = netdev_priv(dev);
 

drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c

@@ -1902,7 +1902,7 @@ static int set_rss_table(struct net_device *dev,
 }
 
 static int get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info,
-		     void *rules)
+		     u32 *rules)
 {
 	const struct port_info *pi = netdev_priv(dev);
 

drivers/net/ethernet/freescale/gianfar_ethtool.c

@@ -1712,7 +1712,7 @@ static int gfar_set_nfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
 }
 
 static int gfar_get_nfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
-		void *rule_locs)
+		u32 *rule_locs)
 {
 	struct gfar_private *priv = netdev_priv(dev);
 	int ret = 0;
@@ -1728,7 +1728,7 @@ static int gfar_get_nfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
 		ret = gfar_get_cls(priv, cmd);
 		break;
 	case ETHTOOL_GRXCLSRLALL:
-		ret = gfar_get_cls_all(priv, cmd, (u32 *) rule_locs);
+		ret = gfar_get_cls_all(priv, cmd, rule_locs);
 		break;
 	default:
 		ret = -EINVAL;

drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c

@@ -2287,7 +2287,7 @@ static int ixgbe_get_ethtool_fdir_all(struct ixgbe_adapter *adapter,
 }
 
 static int ixgbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
-			   void *rule_locs)
+			   u32 *rule_locs)
 {
 	struct ixgbe_adapter *adapter = netdev_priv(dev);
 	int ret = -EOPNOTSUPP;
@@ -2305,8 +2305,7 @@ static int ixgbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
 		ret = ixgbe_get_ethtool_fdir_entry(adapter, cmd);
 		break;
 	case ETHTOOL_GRXCLSRLALL:
-		ret = ixgbe_get_ethtool_fdir_all(adapter, cmd,
-						 (u32 *)rule_locs);
+		ret = ixgbe_get_ethtool_fdir_all(adapter, cmd, rule_locs);
 		break;
 	default:
 		break;

drivers/net/ethernet/sfc/ethtool.c

@@ -824,7 +824,7 @@ static int efx_ethtool_reset(struct net_device *net_dev, u32 *flags)
 
 static int
 efx_ethtool_get_rxnfc(struct net_device *net_dev,
-		      struct ethtool_rxnfc *info, void *rules __always_unused)
+		      struct ethtool_rxnfc *info, u32 *rules __always_unused)
 {
 	struct efx_nic *efx = netdev_priv(net_dev);
 

drivers/net/ethernet/sun/niu.c

@@ -7303,7 +7303,7 @@ static int niu_get_ethtool_tcam_all(struct niu *np,
 }
 
 static int niu_get_nfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
-		       void *rule_locs)
+		       u32 *rule_locs)
 {
 	struct niu *np = netdev_priv(dev);
 	int ret = 0;
@@ -7322,7 +7322,7 @@ static int niu_get_nfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
 		ret = niu_get_ethtool_tcam_entry(np, cmd);
 		break;
 	case ETHTOOL_GRXCLSRLALL:
-		ret = niu_get_ethtool_tcam_all(np, cmd, (u32 *)rule_locs);
+		ret = niu_get_ethtool_tcam_all(np, cmd, rule_locs);
 		break;
 	default:
 		ret = -EINVAL;

drivers/net/vmxnet3/vmxnet3_ethtool.c

@@ -558,7 +558,7 @@ vmxnet3_set_ringparam(struct net_device *netdev,
 
 static int
 vmxnet3_get_rxnfc(struct net_device *netdev, struct ethtool_rxnfc *info,
-		  void *rules)
+		  u32 *rules)
 {
 	struct vmxnet3_adapter *adapter = netdev_priv(netdev);
 	switch (info->cmd) {

include/linux/ethtool.h

@@ -479,7 +479,7 @@ struct ethtool_rx_flow_spec {
  * @data: Command-dependent value
  * @fs: Flow classification rule
  * @rule_cnt: Number of rules to be affected
- * @rule_locs: Array of valid rule locations
+ * @rule_locs: Array of used rule locations
  *
  * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
  * the fields included in the flow hash, e.g. %RXH_IP_SRC.  The following
@@ -497,7 +497,8 @@ struct ethtool_rx_flow_spec {
  * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
  * user buffer for @rule_locs on entry.  On return, @data is the size
  * of the rule table and @rule_locs contains the locations of the
- * defined rules.
+ * defined rules.  Drivers must use the second parameter to get_rxnfc()
+ * instead of @rule_locs.
  *
  * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
  * @fs.@location specifies the location to use and must not be ignored.
@@ -939,7 +940,7 @@ struct ethtool_ops {
 	int	(*set_priv_flags)(struct net_device *, u32);
 	int	(*get_sset_count)(struct net_device *, int);
 	int	(*get_rxnfc)(struct net_device *,
-			     struct ethtool_rxnfc *, void *);
+			     struct ethtool_rxnfc *, u32 *rule_locs);
 	int	(*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
 	int	(*flash_device)(struct net_device *, struct ethtool_flash *);
 	int	(*reset)(struct net_device *, u32 *);