drm/panel: simple: add Multi-Innotechnology MI1010AIT-1CP1

The Multi Innotechnology is a 10.1" 1280x800 panel.

The datasheet did not specify specific values for sync, back, front porch.
The values are a best guess based on values for similar panels.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Co-developed-by: NUlrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: NUlrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: NOleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: NAhmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210805111944.13533-2-o.rempel@pengutronix.de

drivers/gpu/drm/panel/panel-simple.c

@@ -3192,6 +3192,37 @@ static const struct panel_desc mitsubishi_aa070mc01 = {
 	.bus_flags = DRM_BUS_FLAG_DE_HIGH,
 };
 
+static const struct display_timing multi_inno_mi1010ait_1cp_timing = {
+	.pixelclock = { 68900000, 70000000, 73400000 },
+	.hactive = { 1280, 1280, 1280 },
+	.hfront_porch = { 30, 60, 71 },
+	.hback_porch = { 30, 60, 71 },
+	.hsync_len = { 10, 10, 48 },
+	.vactive = { 800, 800, 800 },
+	.vfront_porch = { 5, 10, 10 },
+	.vback_porch = { 5, 10, 10 },
+	.vsync_len = { 5, 6, 13 },
+	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
+		 DISPLAY_FLAGS_DE_HIGH,
+};
+
+static const struct panel_desc multi_inno_mi1010ait_1cp = {
+	.timings = &multi_inno_mi1010ait_1cp_timing,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 217,
+		.height = 136,
+	},
+	.delay = {
+		.enable = 50,
+		.disable = 50,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
 static const struct display_timing nec_nl12880bc20_05_timing = {
 	.pixelclock = { 67000000, 71000000, 75000000 },
 	.hactive = { 1280, 1280, 1280 },
@@ -4678,6 +4709,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "mitsubishi,aa070mc01-ca1",
 		.data = &mitsubishi_aa070mc01,
+	}, {
+		.compatible = "multi-inno,mi1010ait-1cp",
+		.data = &multi_inno_mi1010ait_1cp,
 	}, {
 		.compatible = "nec,nl12880bc20-05",
 		.data = &nec_nl12880bc20_05,