media: imx: imx-mipi-csis: Add output format

Due to how pixel components are transmitted on the CSI-2 serial bus
and how they are deserialized by the CSI-2 receiver, the component
ordering might change and the image formats on the sink and source pads
of the receiver should reflect it.

For RGB24, in example, the component ordering on the wire as described by
the CSI-2 specification matches the BGR888 format, while once
deserialized by the CSIS receiver it matches the RGB888 format.

Add an additional .output field to struct csis_pix_format to allow
propagating the correct format to the source pad after a format
configuration on the sink.

The change is only relevant for RGB24 but paves the way for further
format translations in future.
Signed-off-by: NJacopo Mondi <jacopo@jmondi.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NRui Miguel Silva <rmfrfs@gmail.com>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl>

drivers/media/platform/imx/imx-mipi-csis.c

@@ -349,6 +349,7 @@ struct csi_state {
 
 struct csis_pix_format {
 	u32 code;
+	u32 output;
 	u32 data_type;
 	u8 width;
 };
@@ -357,94 +358,116 @@ static const struct csis_pix_format mipi_csis_formats[] = {
 	/* YUV formats. */
 	{
 		.code = MEDIA_BUS_FMT_UYVY8_1X16,
+		.output = MEDIA_BUS_FMT_UYVY8_1X16,
 		.data_type = MIPI_CSI2_DATA_TYPE_YUV422_8,
 		.width = 16,
 	},
 	/* RGB formats. */
 	{
 		.code = MEDIA_BUS_FMT_RGB565_1X16,
+		.output = MEDIA_BUS_FMT_RGB565_1X16,
 		.data_type = MIPI_CSI2_DATA_TYPE_RGB565,
 		.width = 16,
 	}, {
 		.code = MEDIA_BUS_FMT_BGR888_1X24,
+		.output = MEDIA_BUS_FMT_RGB888_1X24,
 		.data_type = MIPI_CSI2_DATA_TYPE_RGB888,
 		.width = 24,
 	},
 	/* RAW (Bayer and greyscale) formats. */
 	{
 		.code = MEDIA_BUS_FMT_SBGGR8_1X8,
+		.output = MEDIA_BUS_FMT_SBGGR8_1X8,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW8,
 		.width = 8,
 	}, {
 		.code = MEDIA_BUS_FMT_SGBRG8_1X8,
+		.output = MEDIA_BUS_FMT_SGBRG8_1X8,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW8,
 		.width = 8,
 	}, {
 		.code = MEDIA_BUS_FMT_SGRBG8_1X8,
+		.output = MEDIA_BUS_FMT_SGRBG8_1X8,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW8,
 		.width = 8,
 	}, {
 		.code = MEDIA_BUS_FMT_SRGGB8_1X8,
+		.output = MEDIA_BUS_FMT_SRGGB8_1X8,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW8,
 		.width = 8,
 	}, {
 		.code = MEDIA_BUS_FMT_Y8_1X8,
+		.output = MEDIA_BUS_FMT_Y8_1X8,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW8,
 		.width = 8,
 	}, {
 		.code = MEDIA_BUS_FMT_SBGGR10_1X10,
+		.output = MEDIA_BUS_FMT_SBGGR10_1X10,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW10,
 		.width = 10,
 	}, {
 		.code = MEDIA_BUS_FMT_SGBRG10_1X10,
+		.output = MEDIA_BUS_FMT_SGBRG10_1X10,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW10,
 		.width = 10,
 	}, {
 		.code = MEDIA_BUS_FMT_SGRBG10_1X10,
+		.output = MEDIA_BUS_FMT_SGRBG10_1X10,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW10,
 		.width = 10,
 	}, {
 		.code = MEDIA_BUS_FMT_SRGGB10_1X10,
+		.output = MEDIA_BUS_FMT_SRGGB10_1X10,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW10,
 		.width = 10,
 	}, {
 		.code = MEDIA_BUS_FMT_Y10_1X10,
+		.output = MEDIA_BUS_FMT_Y10_1X10,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW10,
 		.width = 10,
 	}, {
 		.code = MEDIA_BUS_FMT_SBGGR12_1X12,
+		.output = MEDIA_BUS_FMT_SBGGR12_1X12,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW12,
 		.width = 12,
 	}, {
 		.code = MEDIA_BUS_FMT_SGBRG12_1X12,
+		.output = MEDIA_BUS_FMT_SGBRG12_1X12,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW12,
 		.width = 12,
 	}, {
 		.code = MEDIA_BUS_FMT_SGRBG12_1X12,
+		.output = MEDIA_BUS_FMT_SGRBG12_1X12,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW12,
 		.width = 12,
 	}, {
 		.code = MEDIA_BUS_FMT_SRGGB12_1X12,
+		.output = MEDIA_BUS_FMT_SRGGB12_1X12,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW12,
 		.width = 12,
 	}, {
 		.code = MEDIA_BUS_FMT_Y12_1X12,
+		.output = MEDIA_BUS_FMT_Y12_1X12,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW12,
 		.width = 12,
 	}, {
 		.code = MEDIA_BUS_FMT_SBGGR14_1X14,
+		.output = MEDIA_BUS_FMT_SBGGR14_1X14,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW14,
 		.width = 14,
 	}, {
 		.code = MEDIA_BUS_FMT_SGBRG14_1X14,
+		.output = MEDIA_BUS_FMT_SGBRG14_1X14,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW14,
 		.width = 14,
 	}, {
 		.code = MEDIA_BUS_FMT_SGRBG14_1X14,
+		.output = MEDIA_BUS_FMT_SGRBG14_1X14,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW14,
 		.width = 14,
 	}, {
 		.code = MEDIA_BUS_FMT_SRGGB14_1X14,
+		.output = MEDIA_BUS_FMT_SRGGB14_1X14,
 		.data_type = MIPI_CSI2_DATA_TYPE_RAW14,
 		.width = 14,
 	}
@@ -1107,6 +1130,9 @@ static int mipi_csis_set_fmt(struct v4l2_subdev *sd,
 				   CSIS_PAD_SOURCE);
 	*fmt = sdformat->format;
 
+	/* The format on the source pad might change due to unpacking. */
+	fmt->code = csis_fmt->output;
+
 	/* Store the CSIS format descriptor for active formats. */
 	if (sdformat->which == V4L2_SUBDEV_FORMAT_ACTIVE)
 		state->csis_fmt = csis_fmt;