Merge tag 'amlogic-dt64' of...

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

arm64: dts: Amlogic updates for v5.7
 - sound, bluetooth, thermal updates
 - A1: add secure power domain nodes
 - misc. cleanups

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson: add thermal zones to meson gx devices
  arm64: dts: meson: khadas-vim3: move model to g12b-khadas-vim3 dtsi
  arm64: dts: meson-g12b: fix N2/VIM3 audio card model names
  arm64: dts: meson-gxbb-vega-s95: fix bluetooth node
  arm64: dts: meson-gxl-s905x-p212: add bluetooth nodes
  arm64: dts: meson-gxbb-odroid-c2: add rc-odroid ir keymap
  arm64: dts: meson: fix gxm-khadas-vim2 wifi
  arm64: dts: meson: sei510: fix sound card codec node
  arm64: dts: meson: s400: fix sound card codec nodes
  arm64: dts: meson: add pdm reset line
  arm64: dts: g12-common: add parkmode_disable_ss_quirk on DWC3 controller
  arm64: dts: amlogic: add rc-videostrong-kii-pro keymap
  arm64: dts: meson: a1: add secure power domain controller

Link: https://lore.kernel.org/r/7hlfo0ugnj.fsf@baylibre.comSigned-off-by: NArnd Bergmann <arnd@arndb.de>

arch/arm64/boot/dts/amlogic/meson-a1.dtsi

@@ -60,6 +60,12 @@
 
 	sm: secure-monitor {
 		compatible = "amlogic,meson-gxbb-sm";
+
+		pwrc: power-controller {
+			compatible = "amlogic,meson-a1-pwrc";
+			#power-domain-cells = <1>;
+			status = "okay";
+		};
 	};
 
 	soc {

arch/arm64/boot/dts/amlogic/meson-axg-s400.dts

@@ -313,15 +313,15 @@
 			dai-tdm-slot-rx-mask-1 = <1 1>;
 			mclk-fs = <256>;
 
-			codec@0 {
+			codec-0 {
 				sound-dai = <&lineout>;
 			};
 
-			codec@1 {
+			codec-1 {
 				sound-dai = <&speaker_amp1>;
 			};
 
-			codec@2 {
+			codec-2 {
 				sound-dai = <&linein>;
 			};
 

arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi

@@ -2220,6 +2220,7 @@
 				dr_mode = "host";
 				snps,dis_u2_susphy_quirk;
 				snps,quirk-frame-length-adjustment;
+				snps,parkmode-disable-ss-quirk;
 			};
 		};
 

arch/arm64/boot/dts/amlogic/meson-g12.dtsi

@@ -56,6 +56,7 @@
 			 <&clkc_audio AUD_CLKID_PDM_DCLK>,
 			 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
 		clock-names = "pclk", "dclk", "sysclk";
+		resets = <&clkc_audio AUD_RESET_PDM>;
 		status = "disabled";
 	};
 

arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts

@@ -269,7 +269,7 @@
 			dai-tdm-slot-tx-mask-3 = <1 1>;
 			mclk-fs = <256>;
 
-			codec@0 {
+			codec {
 				sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
 			};
 		};

arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi

@@ -8,6 +8,8 @@
 #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 
 / {
+	model = "Khadas VIM3";
+
 	vddcpu_a: regulator-vddcpu-a {
 		/*
 		 * MP8756GD Regulator.
@@ -48,7 +50,7 @@
 
 	sound {
 		compatible = "amlogic,axg-sound-card";
-		model = "G12A-KHADAS-VIM3";
+		model = "G12B-KHADAS-VIM3";
 		audio-aux-devs = <&tdmout_b>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",

arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts

@@ -208,7 +208,7 @@
 
 	sound {
 		compatible = "amlogic,axg-sound-card";
-		model = "G12A-ODROIDN2";
+		model = "G12B-ODROID-N2";
 		audio-aux-devs = <&tdmout_b>;
 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 				"TDMOUT_B IN 1", "FRDDR_B OUT 1",

arch/arm64/boot/dts/amlogic/meson-gx.dtsi

@@ -12,6 +12,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -83,6 +84,7 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -92,6 +94,7 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu2: cpu@2 {
@@ -101,6 +104,7 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
 		};
 
 		cpu3: cpu@3 {
@@ -110,6 +114,7 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
+			#cooling-cells = <2>;
 		};
 
 		l2: l2-cache0 {
@@ -117,6 +122,53 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+
+			thermal-sensors = <&scpi_sensors 0>;
+
+			trips {
+				cpu_passive: cpu-passive {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				cpu_hot: cpu-hot {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				cpu_critical: cpu-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+
+			cpu_cooling_maps: cooling-maps {
+				map0 {
+					trip = <&cpu_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&cpu_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	arm-pmu {
 		compatible = "arm,cortex-a53-pmu";
 		interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,

arch/arm64/boot/dts/amlogic/meson-gxbb-kii-pro.dts

@@ -76,3 +76,7 @@
 		};
 	};
 };
+
+&ir {
+	linux,rc-map-name = "rc-videostrong-kii-pro";
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

@@ -248,6 +248,7 @@
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
+	linux,rc-map-name = "rc-odroid";
 };
 
 &gpio_ao {

arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi

@@ -245,6 +245,9 @@
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
 	};
 };
 

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi

@@ -15,7 +15,6 @@
 / {
 	aliases {
 		serial0 = &uart_AO;
-		serial1 = &uart_A;
 		ethernet0 = &ethmac;
 	};
 
@@ -180,6 +179,14 @@
 	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
 	pinctrl-names = "default";
 	uart-has-rtscts;
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+		max-speed = <2000000>;
+		clocks = <&wifi32k>;
+		clock-names = "lpo";
+	};
 };
 
 &uart_AO {

arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts

@@ -8,7 +8,6 @@
 /dts-v1/;
 
 #include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
 
 #include "meson-gxm.dtsi"
 
@@ -100,49 +99,6 @@
 		clock-names = "ext_clock";
 	};
 
-	thermal-zones {
-		cpu-thermal {
-			polling-delay-passive = <250>; /* milliseconds */
-			polling-delay = <1000>; /* milliseconds */
-
-			thermal-sensors = <&scpi_sensors 0>;
-
-			trips {
-				cpu_alert0: cpu-alert0 {
-					temperature = <70000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "active";
-				};
-
-				cpu_alert1: cpu-alert1 {
-					temperature = <80000>; /* millicelsius */
-					hysteresis = <2000>; /* millicelsius */
-					type = "passive";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&cpu_alert0>;
-					cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
-				};
-
-				map1 {
-					trip = <&cpu_alert1>;
-					cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
-							 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-	};
-
 	hdmi_5v: regulator-hdmi-5v {
 		compatible = "regulator-fixed";
 
@@ -198,36 +154,23 @@
 	hdmi-phandle = <&hdmi_tx>;
 };
 
-&cpu0 {
-	#cooling-cells = <2>;
-};
-
-&cpu1 {
-	#cooling-cells = <2>;
-};
-
-&cpu2 {
-	#cooling-cells = <2>;
-};
 
-&cpu3 {
-	#cooling-cells = <2>;
-};
-
-&cpu4 {
-	#cooling-cells = <2>;
-};
-
-&cpu5 {
-	#cooling-cells = <2>;
-};
-
-&cpu6 {
-	#cooling-cells = <2>;
-};
+&cpu_cooling_maps {
+	map0 {
+		cooling-device = <&gpio_fan THERMAL_NO_LIMIT 1>;
+	};
 
-&cpu7 {
-	#cooling-cells = <2>;
+	map1 {
+		cooling-device = <&gpio_fan 2 THERMAL_NO_LIMIT>,
+				 <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
 };
 
 &ethmac {
@@ -327,7 +270,7 @@
 	#size-cells = <0>;
 
 	bus-width = <4>;
-	max-frequency = <50000000>;
+	max-frequency = <60000000>;
 
 	non-removable;
 	disable-wp;

arch/arm64/boot/dts/amlogic/meson-gxm.dtsi

@@ -49,6 +49,7 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
 		};
 
 		cpu5: cpu@101 {
@@ -58,6 +59,7 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
 		};
 
 		cpu6: cpu@102 {
@@ -67,6 +69,7 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
 		};
 
 		cpu7: cpu@103 {
@@ -76,6 +79,7 @@
 			enable-method = "psci";
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
+			#cooling-cells = <2>;
 		};
 	};
 };
@@ -124,6 +128,30 @@
 	compatible = "amlogic,meson-gxm-aoclkc", "amlogic,meson-gx-aoclkc";
 };
 
+&cpu_cooling_maps {
+	map0 {
+		cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+
+	map1 {
+		cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+				 <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+	};
+};
+
 &saradc {
 	compatible = "amlogic,meson-gxm-saradc", "amlogic,meson-saradc";
 };

arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi

@@ -9,8 +9,6 @@
 #include <dt-bindings/gpio/meson-g12a-gpio.h>
 
 / {
-	model = "Khadas VIM3";
-
 	aliases {
 		serial0 = &uart_AO;
 		ethernet0 = &ethmac;

arch/arm64/boot/dts/amlogic/meson-sm1.dtsi

@@ -448,6 +448,7 @@
 			 <&clkc_audio AUD_CLKID_PDM_DCLK>,
 			 <&clkc_audio AUD_CLKID_PDM_SYSCLK>;
 		clock-names = "pclk", "dclk", "sysclk";
+		resets = <&clkc_audio AUD_RESET_PDM>;
 		status = "disabled";
 	};
 };