提交 7fe519c2 编写于 作者: J Josh Boyer 提交者: Paul Mackerras

powerpc: Introduce ppc_pci_flags accessors

Currently there are a number of platforms that open code access to
the ppc_pci_flags global variable.  However, that variable is not
present if CONFIG_PCI is not set, which can lead to a build break.

This introduces a number of accessor functions that are defined
to be empty in the case of CONFIG_PCI being disabled.  The
various platform files in the kernel are updated to use these.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
上级 edc72ac4
......@@ -13,7 +13,6 @@
struct device_node;
extern unsigned int ppc_pci_flags;
enum {
/* Force re-assigning all resources (ignore firmware
* setup completely)
......@@ -36,6 +35,31 @@ enum {
/* ... except for domain 0 */
PPC_PCI_COMPAT_DOMAIN_0 = 0x00000020,
};
#ifdef CONFIG_PCI
extern unsigned int ppc_pci_flags;
static inline void ppc_pci_set_flags(int flags)
{
ppc_pci_flags = flags;
}
static inline void ppc_pci_add_flags(int flags)
{
ppc_pci_flags |= flags;
}
static inline int ppc_pci_has_flag(int flag)
{
return (ppc_pci_flags & flag);
}
#else
static inline void ppc_pci_set_flags(int flags) { }
static inline void ppc_pci_add_flags(int flags) { }
static inline int ppc_pci_has_flag(int flag)
{
return 0;
}
#endif
/*
......
......@@ -38,8 +38,8 @@ struct pci_dev;
* Set this to 1 if you want the kernel to re-assign all PCI
* bus numbers (don't do that on ppc64 yet !)
*/
#define pcibios_assign_all_busses() (ppc_pci_flags & \
PPC_PCI_REASSIGN_ALL_BUS)
#define pcibios_assign_all_busses() \
(ppc_pci_has_flag(PPC_PCI_REASSIGN_ALL_BUS))
#define pcibios_scan_all_fns(a, b) 0
static inline void pcibios_set_master(struct pci_dev *dev)
......
......@@ -100,7 +100,7 @@ static void __init ep405_setup_arch(void)
/* Find & init the BCSR CPLD */
ep405_init_bcsr();
ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC);
}
static int __init ep405_probe(void)
......
......@@ -44,7 +44,7 @@ static int __init kilauea_probe(void)
if (!of_flat_dt_is_compatible(root, "amcc,kilauea"))
return 0;
ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC);
return 1;
}
......
......@@ -61,7 +61,7 @@ static int __init ppc40x_probe(void)
for (i = 0; i < ARRAY_SIZE(board); i++) {
if (of_flat_dt_is_compatible(root, board[i])) {
ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC);
return 1;
}
}
......
......@@ -54,7 +54,7 @@ static int __init ebony_probe(void)
if (!of_flat_dt_is_compatible(root, "ibm,ebony"))
return 0;
ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC);
return 1;
}
......
......@@ -69,7 +69,7 @@ static int __init ppc44x_probe(void)
for (i = 0; i < ARRAY_SIZE(board); i++) {
if (of_flat_dt_is_compatible(root, board[i])) {
ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC);
return 1;
}
}
......
......@@ -51,7 +51,7 @@ static int __init sam440ep_probe(void)
if (!of_flat_dt_is_compatible(root, "acube,sam440ep"))
return 0;
ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC;
ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC);
return 1;
}
......
......@@ -375,7 +375,7 @@ mpc52xx_add_bridge(struct device_node *node)
pr_debug("Adding MPC52xx PCI host bridge %s\n", node->full_name);
ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS);
if (of_address_to_resource(node, 0, &rsrc) != 0) {
printk(KERN_ERR "Can't get %s resources\n", node->full_name);
......
......@@ -53,7 +53,7 @@ static void __init pq2_pci_add_bridge(struct device_node *np)
if (of_address_to_resource(np, 0, &r) || r.end - r.start < 0x10b)
goto err;
ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS);
hose = pcibios_alloc_controller(np);
if (!hose)
......
......@@ -199,7 +199,7 @@ static void __init setup_peg2(struct pci_controller *hose, struct device_node *d
printk ("RTAS supporting Pegasos OF not found, please upgrade"
" your firmware\n");
}
ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS);
/* keep the reference to the root node */
}
......
......@@ -729,7 +729,7 @@ static void __init setup_bandit(struct pci_controller *hose,
static int __init setup_uninorth(struct pci_controller *hose,
struct resource *addr)
{
ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS);
has_uninorth = 1;
hose->ops = &macrisc_pci_ops;
hose->cfg_addr = ioremap(addr->start + 0x800000, 0x1000);
......@@ -996,7 +996,7 @@ void __init pmac_pci_init(void)
struct device_node *np, *root;
struct device_node *ht = NULL;
ppc_pci_flags = PPC_PCI_CAN_SKIP_ISA_ALIGN;
ppc_pci_set_flags(PPC_PCI_CAN_SKIP_ISA_ALIGN);
root = of_find_node_by_path("/");
if (root == NULL) {
......@@ -1055,7 +1055,7 @@ void __init pmac_pci_init(void)
* some offset between bus number and domains for now when we
* assign all busses should help for now
*/
if (ppc_pci_flags & PPC_PCI_REASSIGN_ALL_BUS)
if (ppc_pci_has_flag(PPC_PCI_REASSIGN_ALL_BUS))
pcibios_assign_bus_offset = 0x10;
#endif
}
......
......@@ -187,7 +187,7 @@ int __init fsl_add_bridge(struct device_node *dev, int is_primary)
printk(KERN_WARNING "Can't get bus-range for %s, assume"
" bus 0\n", dev->full_name);
ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS);
hose = pcibios_alloc_controller(dev);
if (!hose)
return -ENOMEM;
......@@ -300,7 +300,7 @@ int __init mpc83xx_add_bridge(struct device_node *dev)
" bus 0\n", dev->full_name);
}
ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS);
hose = pcibios_alloc_controller(dev);
if (!hose)
return -ENOMEM;
......
......@@ -57,7 +57,7 @@ void __init setup_grackle(struct pci_controller *hose)
{
setup_indirect_pci(hose, 0xfec00000, 0xfee00000, 0);
if (machine_is_compatible("PowerMac1,1"))
ppc_pci_flags |= PPC_PCI_REASSIGN_ALL_BUS;
ppc_pci_add_flags(PPC_PCI_REASSIGN_ALL_BUS);
if (machine_is_compatible("AAPL,PowerBook1998"))
grackle_set_loop_snoop(hose, 1);
#if 0 /* Disabled for now, HW problems ??? */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册