[PATCH] spi: fix error setting the spi mode in pxa2xx_spi.c

Currently the spi mode can be set to the wrong mode if you are switching
from any mode other than mode 0.  This is because the mode is set using a
bitwise or on uncleared bits.  The following patch clears the mode bits
before setting the new mode.  I've also modified it to use the appropriate
defines from pxa-regs.h for readability.
Signed-off-by: NJustin Clacherty <justin@redfish-group.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drivers/spi/pxa2xx_spi.c

@@ -1169,8 +1169,9 @@ static int setup(struct spi_device *spi)
 				spi->bits_per_word - 16 : spi->bits_per_word)
 			| SSCR0_SSE
 			| (spi->bits_per_word > 16 ? SSCR0_EDSS : 0);
-	chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) << 4)
-			| (((spi->mode & SPI_CPOL) != 0) << 3);
+	chip->cr1 &= ~(SSCR1_SPO | SSCR1_SPH);
+	chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0)
+			| (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0);
 
 	/* NOTE:  PXA25x_SSP _could_ use external clocking ... */
 	if (drv_data->ssp_type != PXA25x_SSP)