usb: ehci: handshake CMD_RUN instead of STS_HALT

For Aspeed, HCHalted status depends on not only Run/Stop but also
ASS/PSS status.
Handshake CMD_RUN on startup instead.
Tested-by: NTao Ren <rentao.bupt@gmail.com>
Reviewed-by: NTao Ren <rentao.bupt@gmail.com>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NNeal Liu <neal_liu@aspeedtech.com>
Link: https://lore.kernel.org/r/20210910073619.26095-1-neal_liu@aspeedtech.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/host/ehci-hcd.c

@@ -634,7 +634,16 @@ static int ehci_run (struct usb_hcd *hcd)
 	/* Wait until HC become operational */
 	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
 	msleep(5);
-	rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT, 0, 100 * 1000);
+
+	/* For Aspeed, STS_HALT also depends on ASS/PSS status.
+	 * Check CMD_RUN instead.
+	 */
+	if (ehci->is_aspeed)
+		rc = ehci_handshake(ehci, &ehci->regs->command, CMD_RUN,
+				    1, 100 * 1000);
+	else
+		rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT,
+				    0, 100 * 1000);
 
 	up_write(&ehci_cf_port_reset_rwsem);
 

drivers/usb/host/ehci-platform.c

@@ -297,6 +297,12 @@ static int ehci_platform_probe(struct platform_device *dev)
 					  "has-transaction-translator"))
 			hcd->has_tt = 1;
 
+		if (of_device_is_compatible(dev->dev.of_node,
+					    "aspeed,ast2500-ehci") ||
+		    of_device_is_compatible(dev->dev.of_node,
+					    "aspeed,ast2600-ehci"))
+			ehci->is_aspeed = 1;
+
 		if (soc_device_match(quirk_poll_match))
 			priv->quirk_poll = true;
 

drivers/usb/host/ehci.h

@@ -219,6 +219,7 @@ struct ehci_hcd {			/* one per controller */
 	unsigned		need_oc_pp_cycle:1; /* MPC834X port power */
 	unsigned		imx28_write_fix:1; /* For Freescale i.MX28 */
 	unsigned		spurious_oc:1;
+	unsigned		is_aspeed:1;
 
 	/* required for usb32 quirk */
 	#define OHCI_CTRL_HCFS          (3 << 6)