Skip to content

K
Kernel

openeuler / Kernel
12 个月 前同步成功

通知 5
Star 0
Fork 0
K
Kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 7e920426 编写于 作者: M Mikael Starvik 提交者： Linus Torvalds
浏览文件
操作

[PATCH] CRIS update: drivers 

Updates to device drivers.

* Use I/O and DMA allocators.
* Use wait_event_interruptible instead of interrutiple_sleep_on.
* Added spinlocks SMP.
* Changed restore_flags to local_irq_restore etc.
* Updated IDE driver include to fit 2.6.12.
Signed-off-by: NMikael Starvik <starvik@axis.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 059163ca
隐藏空白更改
内联 并排
Showing with 376 addition and 172 deletion
arch/cris/arch-v10/drivers/axisflashmap.c
浏览文件 @ 7e920426
......@@ -11,6 +11,9 @@
* partition split defined below.
*
* $Log: axisflashmap.c,v $
* Revision 1.11 2004/11/15 10:27:14 starvik
* Corrected typo (Thanks to Milton Miller <miltonm@bga.com>).
*
* Revision 1.10 2004/08/16 12:37:22 starvik
* Merge of Linux 2.6.8
*
......@@ -161,7 +164,7 @@
#elif CONFIG_ETRAX_FLASH_BUSWIDTH==2
#define flash_data __u16
#elif CONFIG_ETRAX_FLASH_BUSWIDTH==4
#define flash_data __u16
#define flash_data __u32
#endif
/* From head.S */
......
arch/cris/arch-v10/drivers/ds1302.c
浏览文件 @ 7e920426
......@@ -7,6 +7,15 @@
*! Functions exported: ds1302_readreg, ds1302_writereg, ds1302_init
*!
*! $Log: ds1302.c,v $
*! Revision 1.18 2005/01/24 09:11:26 mikaelam
*! Minor changes to get DS1302 RTC chip driver to work
*!
*! Revision 1.17 2005/01/05 06:11:22 starvik
*! No need to do local_irq_disable after local_irq_save.
*!
*! Revision 1.16 2004/12/13 12:21:52 starvik
*! Added I/O and DMA allocators from Linux 2.4
*!
*! Revision 1.14 2004/08/24 06:48:43 starvik
*! Whitespace cleanup
*!
......@@ -124,9 +133,9 @@
*!
*! ---------------------------------------------------------------------------
*!
*! (C) Copyright 1999, 2000, 2001 Axis Communications AB, LUND, SWEDEN
*! (C) Copyright 1999, 2000, 2001, 2002, 2003, 2004 Axis Communications AB, LUND, SWEDEN
*!
*! $Id: ds1302.c,v 1.14 2004/08/24 06:48:43 starvik Exp $
*! $Id: ds1302.c,v 1.18 2005/01/24 09:11:26 mikaelam Exp $
*!
*!***************************************************************************/
......@@ -145,6 +154,7 @@
#include <asm/arch/svinto.h>
#include <asm/io.h>
#include <asm/rtc.h>
#include <asm/arch/io_interface_mux.h>
#define RTC_MAJOR_NR 121 /* local major, change later */
......@@ -320,7 +330,6 @@ get_rtc_time(struct rtc_time *rtc_tm)
unsigned long flags;
local_irq_save(flags);
local_irq_disable();
rtc_tm->tm_sec = CMOS_READ(RTC_SECONDS);
rtc_tm->tm_min = CMOS_READ(RTC_MINUTES);
......@@ -358,7 +367,7 @@ static int
rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
unsigned long arg)
{
unsigned long flags;
unsigned long flags;
switch(cmd) {
case RTC_RD_TIME: /* read the time/date from RTC */
......@@ -382,7 +391,7 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
return -EPERM;
if (copy_from_user(&rtc_tm, (struct rtc_time*)arg, sizeof(struct rtc_time)))
return -EFAULT;
return -EFAULT;
yrs = rtc_tm.tm_year + 1900;
mon = rtc_tm.tm_mon + 1; /* tm_mon starts at zero */
......@@ -419,7 +428,6 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
BIN_TO_BCD(yrs);
local_irq_save(flags);
local_irq_disable();
CMOS_WRITE(yrs, RTC_YEAR);
CMOS_WRITE(mon, RTC_MONTH);
CMOS_WRITE(day, RTC_DAY_OF_MONTH);
......@@ -438,7 +446,7 @@ rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
case RTC_SET_CHARGE: /* set the RTC TRICKLE CHARGE register */
{
int tcs_val;
int tcs_val;
if (!capable(CAP_SYS_TIME))
return -EPERM;
......@@ -492,8 +500,8 @@ print_rtc_status(void)
/* The various file operations we support. */
static struct file_operations rtc_fops = {
.owner = THIS_MODULE,
.ioctl = rtc_ioctl,
.owner = THIS_MODULE,
.ioctl = rtc_ioctl,
};
/* Probe for the chip by writing something to its RAM and try reading it back. */
......@@ -532,7 +540,7 @@ ds1302_probe(void)
"PB",
#endif
CONFIG_ETRAX_DS1302_RSTBIT);
print_rtc_status();
print_rtc_status();
retval = 1;
} else {
stop();
......@@ -548,7 +556,9 @@ ds1302_probe(void)
int __init
ds1302_init(void)
{
#ifdef CONFIG_ETRAX_I2C
i2c_init();
#endif
if (!ds1302_probe()) {
#ifdef CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT
......@@ -558,25 +568,42 @@ ds1302_init(void)
*
* Make sure that R_GEN_CONFIG is setup correct.
*/
genconfig_shadow = ((genconfig_shadow &
~IO_MASK(R_GEN_CONFIG, ata)) |
(IO_STATE(R_GEN_CONFIG, ata, select)));
*R_GEN_CONFIG = genconfig_shadow;
/* Allocating the ATA interface will grab almost all
* pins in I/O groups a, b, c and d. A consequence of
* allocating the ATA interface is that the fixed
* interfaces shared RAM, parallel port 0, parallel
* port 1, parallel port W, SCSI-8 port 0, SCSI-8 port
* 1, SCSI-W, serial port 2, serial port 3,
* synchronous serial port 3 and USB port 2 and almost
* all GPIO pins on port g cannot be used.
*/
if (cris_request_io_interface(if_ata, "ds1302/ATA")) {
printk(KERN_WARNING "ds1302: Failed to get IO interface\n");
return -1;
}
#elif CONFIG_ETRAX_DS1302_RSTBIT == 0
/* Set the direction of this bit to out. */
genconfig_shadow = ((genconfig_shadow &
~IO_MASK(R_GEN_CONFIG, g0dir)) |
(IO_STATE(R_GEN_CONFIG, g0dir, out)));
*R_GEN_CONFIG = genconfig_shadow;
if (cris_io_interface_allocate_pins(if_gpio_grp_a,
'g',
CONFIG_ETRAX_DS1302_RSTBIT,
CONFIG_ETRAX_DS1302_RSTBIT)) {
printk(KERN_WARNING "ds1302: Failed to get IO interface\n");
return -1;
}
/* Set the direction of this bit to out. */
genconfig_shadow = ((genconfig_shadow &
~IO_MASK(R_GEN_CONFIG, g0dir)) |
(IO_STATE(R_GEN_CONFIG, g0dir, out)));
*R_GEN_CONFIG = genconfig_shadow;
#endif
if (!ds1302_probe()) {
printk(KERN_WARNING "%s: RTC not found.\n", ds1302_name);
return -1;
return -1;
}
#else
printk(KERN_WARNING "%s: RTC not found.\n", ds1302_name);
return -1;
return -1;
#endif
}
/* Initialise trickle charger */
......
arch/cris/arch-v10/drivers/eeprom.c
浏览文件 @ 7e920426
......@@ -20,6 +20,12 @@
*! in the spin-lock.
*!
*! $Log: eeprom.c,v $
*! Revision 1.12 2005/06/19 17:06:46 starvik
*! Merge of Linux 2.6.12.
*!
*! Revision 1.11 2005/01/26 07:14:46 starvik
*! Applied diff from kernel janitors (Nish Aravamudan).
*!
*! Revision 1.10 2003/09/11 07:29:48 starvik
*! Merge of Linux 2.6.0-test5
*!
......@@ -94,6 +100,7 @@
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
#include <asm/uaccess.h>
#include "i2c.h"
......@@ -526,15 +533,10 @@ static ssize_t eeprom_read(struct file * file, char * buf, size_t count, loff_t
return -EFAULT;
}
while(eeprom.busy)
{
interruptible_sleep_on(&eeprom.wait_q);
wait_event_interruptible(eeprom.wait_q, !eeprom.busy);
if (signal_pending(current))
return -EINTR;
/* bail out if we get interrupted */
if (signal_pending(current))
return -EINTR;
}
eeprom.busy++;
page = (unsigned char) (p >> 8);
......@@ -604,13 +606,10 @@ static ssize_t eeprom_write(struct file * file, const char * buf, size_t count,
return -EFAULT;
}
while(eeprom.busy)
{
interruptible_sleep_on(&eeprom.wait_q);
/* bail out if we get interrupted */
if (signal_pending(current))
return -EINTR;
}
wait_event_interruptible(eeprom.wait_q, !eeprom.busy);
/* bail out if we get interrupted */
if (signal_pending(current))
return -EINTR;
eeprom.busy++;
for(i = 0; (i < EEPROM_RETRIES) && (restart > 0); i++)
{
......
arch/cris/arch-v10/drivers/gpio.c
浏览文件 @ 7e920426
/* $Id: gpio.c,v 1.12 2004/08/24 07:19:59 starvik Exp $
/* $Id: gpio.c,v 1.17 2005/06/19 17:06:46 starvik Exp $
*
* Etrax general port I/O device
*
......@@ -9,6 +9,18 @@
* Johan Adolfsson (read/set directions, write, port G)
*
* $Log: gpio.c,v $
* Revision 1.17 2005/06/19 17:06:46 starvik
* Merge of Linux 2.6.12.
*
* Revision 1.16 2005/03/07 13:02:29 starvik
* Protect driver global states with spinlock
*
* Revision 1.15 2005/01/05 06:08:55 starvik
* No need to do local_irq_disable after local_irq_save.
*
* Revision 1.14 2004/12/13 12:21:52 starvik
* Added I/O and DMA allocators from Linux 2.4
*
* Revision 1.12 2004/08/24 07:19:59 starvik
* Whitespace cleanup
*
......@@ -142,6 +154,7 @@
#include <asm/io.h>
#include <asm/system.h>
#include <asm/irq.h>
#include <asm/arch/io_interface_mux.h>
#define GPIO_MAJOR 120 /* experimental MAJOR number */
......@@ -194,6 +207,8 @@ static struct gpio_private *alarmlist = 0;
static int gpio_some_alarms = 0; /* Set if someone uses alarm */
static unsigned long gpio_pa_irq_enabled_mask = 0;
static DEFINE_SPINLOCK(gpio_lock); /* Protect directions etc */
/* Port A and B use 8 bit access, but Port G is 32 bit */
#define NUM_PORTS (GPIO_MINOR_B+1)
......@@ -241,6 +256,9 @@ static volatile unsigned char *dir_shadow[NUM_PORTS] = {
&port_pb_dir_shadow
};
/* All bits in port g that can change dir. */
static const unsigned long int changeable_dir_g_mask = 0x01FFFF01;
/* Port G is 32 bit, handle it special, some bits are both inputs
and outputs at the same time, only some of the bits can change direction
and some of them in groups of 8 bit. */
......@@ -260,6 +278,7 @@ gpio_poll(struct file *file,
unsigned int mask = 0;
struct gpio_private *priv = (struct gpio_private *)file->private_data;
unsigned long data;
spin_lock(&gpio_lock);
poll_wait(file, &priv->alarm_wq, wait);
if (priv->minor == GPIO_MINOR_A) {
unsigned long flags;
......@@ -270,10 +289,10 @@ gpio_poll(struct file *file,
*/
tmp = ~data & priv->highalarm & 0xFF;
tmp = (tmp << R_IRQ_MASK1_SET__pa0__BITNR);
save_flags(flags); cli();
local_irq_save(flags);
gpio_pa_irq_enabled_mask |= tmp;
*R_IRQ_MASK1_SET = tmp;
restore_flags(flags);
local_irq_restore(flags);
} else if (priv->minor == GPIO_MINOR_B)
data = *R_PORT_PB_DATA;
......@@ -286,8 +305,11 @@ gpio_poll(struct file *file,
(~data & priv->lowalarm)) {
mask = POLLIN|POLLRDNORM;
}
spin_unlock(&gpio_lock);
DP(printk("gpio_poll ready: mask 0x%08X\n", mask));
return mask;
}
......@@ -296,6 +318,7 @@ int etrax_gpio_wake_up_check(void)
struct gpio_private *priv = alarmlist;
unsigned long data = 0;
int ret = 0;
spin_lock(&gpio_lock);
while (priv) {
if (USE_PORTS(priv)) {
data = *priv->port;
......@@ -310,6 +333,7 @@ int etrax_gpio_wake_up_check(void)
}
priv = priv->next;
}
spin_unlock(&gpio_lock);
return ret;
}
......@@ -327,6 +351,7 @@ static irqreturn_t
gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
unsigned long tmp;
spin_lock(&gpio_lock);
/* Find what PA interrupts are active */
tmp = (*R_IRQ_READ1);
......@@ -337,6 +362,8 @@ gpio_pa_interrupt(int irq, void *dev_id, struct pt_regs *regs)
*R_IRQ_MASK1_CLR = tmp;
gpio_pa_irq_enabled_mask &= ~tmp;
spin_unlock(&gpio_lock);
if (gpio_some_alarms) {
return IRQ_RETVAL(etrax_gpio_wake_up_check());
}
......@@ -350,6 +377,9 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
struct gpio_private *priv = (struct gpio_private *)file->private_data;
unsigned char data, clk_mask, data_mask, write_msb;
unsigned long flags;
spin_lock(&gpio_lock);
ssize_t retval = count;
if (priv->minor !=GPIO_MINOR_A && priv->minor != GPIO_MINOR_B) {
return -EFAULT;
......@@ -372,7 +402,7 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
data = *buf++;
if (priv->write_msb) {
for (i = 7; i >= 0;i--) {
local_irq_save(flags); local_irq_disable();
local_irq_save(flags);
*priv->port = *priv->shadow &= ~clk_mask;
if (data & 1<<i)
*priv->port = *priv->shadow |= data_mask;
......@@ -384,7 +414,7 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
}
} else {
for (i = 0; i <= 7;i++) {
local_irq_save(flags); local_irq_disable();
local_irq_save(flags);
*priv->port = *priv->shadow &= ~clk_mask;
if (data & 1<<i)
*priv->port = *priv->shadow |= data_mask;
......@@ -396,6 +426,7 @@ static ssize_t gpio_write(struct file * file, const char * buf, size_t count,
}
}
}
spin_unlock(&gpio_lock);
return retval;
}
......@@ -452,9 +483,14 @@ gpio_open(struct inode *inode, struct file *filp)
static int
gpio_release(struct inode *inode, struct file *filp)
{
struct gpio_private *p = alarmlist;
struct gpio_private *todel = (struct gpio_private *)filp->private_data;
struct gpio_private *p;
struct gpio_private *todel;
spin_lock(&gpio_lock);
p = alarmlist;
todel = (struct gpio_private *)filp->private_data;
/* unlink from alarmlist and free the private structure */
if (p == todel) {
......@@ -476,7 +512,7 @@ gpio_release(struct inode *inode, struct file *filp)
p = p->next;
}
gpio_some_alarms = 0;
spin_unlock(&gpio_lock);
return 0;
}
......@@ -491,14 +527,14 @@ unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg)
*/
unsigned long flags;
if (USE_PORTS(priv)) {
local_irq_save(flags); local_irq_disable();
local_irq_save(flags);
*priv->dir = *priv->dir_shadow &=
~((unsigned char)arg & priv->changeable_dir);
local_irq_restore(flags);
return ~(*priv->dir_shadow) & 0xFF; /* Only 8 bits */
} else if (priv->minor == GPIO_MINOR_G) {
/* We must fiddle with R_GEN_CONFIG to change dir */
save_flags(flags); cli();
local_irq_save(flags);
if (((arg & dir_g_in_bits) != arg) &&
(arg & changeable_dir_g)) {
arg &= changeable_dir_g;
......@@ -533,7 +569,7 @@ unsigned long inline setget_input(struct gpio_private *priv, unsigned long arg)
/* Must be a >120 ns delay before writing this again */
}
restore_flags(flags);
local_irq_restore(flags);
return dir_g_in_bits;
}
return 0;
......@@ -543,14 +579,14 @@ unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg)
{
unsigned long flags;
if (USE_PORTS(priv)) {
local_irq_save(flags); local_irq_disable();
local_irq_save(flags);
*priv->dir = *priv->dir_shadow |=
((unsigned char)arg & priv->changeable_dir);
local_irq_restore(flags);
return *priv->dir_shadow;
} else if (priv->minor == GPIO_MINOR_G) {
/* We must fiddle with R_GEN_CONFIG to change dir */
save_flags(flags); cli();
local_irq_save(flags);
if (((arg & dir_g_out_bits) != arg) &&
(arg & changeable_dir_g)) {
/* Set bits in genconfig to set to output */
......@@ -583,7 +619,7 @@ unsigned long inline setget_output(struct gpio_private *priv, unsigned long arg)
*R_GEN_CONFIG = genconfig_shadow;
/* Must be a >120 ns delay before writing this again */
}
restore_flags(flags);
local_irq_restore(flags);
return dir_g_out_bits & 0x7FFFFFFF;
}
return 0;
......@@ -598,22 +634,26 @@ gpio_ioctl(struct inode *inode, struct file *file,
{
unsigned long flags;
unsigned long val;
int ret = 0;
struct gpio_private *priv = (struct gpio_private *)file->private_data;
if (_IOC_TYPE(cmd) != ETRAXGPIO_IOCTYPE) {
return -EINVAL;
}
spin_lock(&gpio_lock);
switch (_IOC_NR(cmd)) {
case IO_READBITS: /* Use IO_READ_INBITS and IO_READ_OUTBITS instead */
// read the port
if (USE_PORTS(priv)) {
return *priv->port;
ret = *priv->port;
} else if (priv->minor == GPIO_MINOR_G) {
return (*R_PORT_G_DATA) & 0x7FFFFFFF;
ret = (*R_PORT_G_DATA) & 0x7FFFFFFF;
}
break;
case IO_SETBITS:
local_irq_save(flags); local_irq_disable();
local_irq_save(flags);
// set changeable bits with a 1 in arg
if (USE_PORTS(priv)) {
*priv->port = *priv->shadow |=
......@@ -624,7 +664,7 @@ gpio_ioctl(struct inode *inode, struct file *file,
local_irq_restore(flags);
break;
case IO_CLRBITS:
local_irq_save(flags); local_irq_disable();
local_irq_save(flags);
// clear changeable bits with a 1 in arg
if (USE_PORTS(priv)) {
*priv->port = *priv->shadow &=
......@@ -666,33 +706,34 @@ gpio_ioctl(struct inode *inode, struct file *file,
case IO_READDIR: /* Use IO_SETGET_INPUT/OUTPUT instead! */
/* Read direction 0=input 1=output */
if (USE_PORTS(priv)) {
return *priv->dir_shadow;
ret = *priv->dir_shadow;
} else if (priv->minor == GPIO_MINOR_G) {
/* Note: Some bits are both in and out,
* Those that are dual is set here as well.
*/
return (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF;
ret = (dir_g_shadow | dir_g_out_bits) & 0x7FFFFFFF;
}
break;
case IO_SETINPUT: /* Use IO_SETGET_INPUT instead! */
/* Set direction 0=unchanged 1=input,
* return mask with 1=input
*/
return setget_input(priv, arg) & 0x7FFFFFFF;
ret = setget_input(priv, arg) & 0x7FFFFFFF;
break;
case IO_SETOUTPUT: /* Use IO_SETGET_OUTPUT instead! */
/* Set direction 0=unchanged 1=output,
* return mask with 1=output
*/
return setget_output(priv, arg) & 0x7FFFFFFF;
ret = setget_output(priv, arg) & 0x7FFFFFFF;
break;
case IO_SHUTDOWN:
SOFT_SHUTDOWN();
break;
case IO_GET_PWR_BT:
#if defined (CONFIG_ETRAX_SOFT_SHUTDOWN)
return (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT));
ret = (*R_PORT_G_DATA & ( 1 << CONFIG_ETRAX_POWERBUTTON_BIT));
#else
return 0;
ret = 0;
#endif
break;
case IO_CFG_WRITE_MODE:
......@@ -709,7 +750,7 @@ gpio_ioctl(struct inode *inode, struct file *file,
{
priv->clk_mask = 0;
priv->data_mask = 0;
return -EPERM;
ret = -EPERM;
}
break;
case IO_READ_INBITS:
......@@ -720,8 +761,7 @@ gpio_ioctl(struct inode *inode, struct file *file,
val = *R_PORT_G_DATA;
}
if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
return -EFAULT;
return 0;
ret = -EFAULT;
break;
case IO_READ_OUTBITS:
/* *arg is result of reading the output shadow */
......@@ -731,36 +771,43 @@ gpio_ioctl(struct inode *inode, struct file *file,
val = port_g_data_shadow;
}
if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
return -EFAULT;
ret = -EFAULT;
break;
case IO_SETGET_INPUT:
/* bits set in *arg is set to input,
* *arg updated with current input pins.
*/
if (copy_from_user(&val, (unsigned long*)arg, sizeof(val)))
return -EFAULT;
{
ret = -EFAULT;
break;
}
val = setget_input(priv, val);
if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
return -EFAULT;
ret = -EFAULT;
break;
case IO_SETGET_OUTPUT:
/* bits set in *arg is set to output,
* *arg updated with current output pins.
*/
if (copy_from_user(&val, (unsigned long*)arg, sizeof(val)))
return -EFAULT;
{
ret = -EFAULT;
break;
}
val = setget_output(priv, val);
if (copy_to_user((unsigned long*)arg, &val, sizeof(val)))
return -EFAULT;
ret = -EFAULT;
break;
default:
if (priv->minor == GPIO_MINOR_LEDS)
return gpio_leds_ioctl(cmd, arg);
ret = gpio_leds_ioctl(cmd, arg);
else
return -EINVAL;
ret = -EINVAL;
} /* switch */
return 0;
spin_unlock(&gpio_lock);
return ret;
}
static int
......@@ -802,60 +849,20 @@ struct file_operations gpio_fops = {
};
static void __init gpio_init_port_g(void)
void ioif_watcher(const unsigned int gpio_in_available,
const unsigned int gpio_out_available,
const unsigned char pa_available,
const unsigned char pb_available)
{
#define GROUPA (0x0000FF3F)
#define GROUPB (1<<6 | 1<<7)
#define GROUPC (1<<30 | 1<<31)
#define GROUPD (0x3FFF0000)
#define GROUPD_LOW (0x00FF0000)
unsigned long used_in_bits = 0;
unsigned long used_out_bits = 0;
if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi0, select)){
used_in_bits |= GROUPA | GROUPB | 0 | 0;
used_out_bits |= GROUPA | GROUPB | 0 | 0;
}
if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ata, select)) {
used_in_bits |= GROUPA | GROUPB | GROUPC | (GROUPD & ~(1<<25|1<<26));
used_out_bits |= GROUPA | GROUPB | GROUPC | GROUPD;
}
unsigned long int flags;
D(printk("gpio.c: ioif_watcher called\n"));
D(printk("gpio.c: G in: 0x%08x G out: 0x%08x PA: 0x%02x PB: 0x%02x\n",
gpio_in_available, gpio_out_available, pa_available, pb_available));
if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, par0, select)) {
used_in_bits |= (GROUPA & ~(1<<0)) | 0 | 0 | 0;
used_out_bits |= (GROUPA & ~(1<<0)) | 0 | 0 | 0;
}
if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ser2, select)) {
used_in_bits |= 0 | GROUPB | 0 | 0;
used_out_bits |= 0 | GROUPB | 0 | 0;
}
/* mio same as shared RAM ? */
if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, mio, select)) {
used_in_bits |= (GROUPA & ~(1<<0)) | 0 |0 |GROUPD_LOW;
used_out_bits |= (GROUPA & ~(1<<0|1<<1|1<<2)) | 0 |0 |GROUPD_LOW;
}
if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi1, select)) {
used_in_bits |= 0 | 0 | GROUPC | GROUPD;
used_out_bits |= 0 | 0 | GROUPC | GROUPD;
}
if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, scsi0w, select)) {
used_in_bits |= GROUPA | GROUPB | 0 | (GROUPD_LOW | 1<<24);
used_out_bits |= GROUPA | GROUPB | 0 | (GROUPD_LOW | 1<<24 | 1<<25|1<<26);
}
spin_lock_irqsave(&gpio_lock, flags);
if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, par1, select)) {
used_in_bits |= 0 | 0 | 0 | (GROUPD & ~(1<<24));
used_out_bits |= 0 | 0 | 0 | (GROUPD & ~(1<<24));
}
if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, ser3, select)) {
used_in_bits |= 0 | 0 | GROUPC | 0;
used_out_bits |= 0 | 0 | GROUPC | 0;
}
/* mio same as shared RAM-W? */
if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, mio_w, select)) {
used_in_bits |= (GROUPA & ~(1<<0)) | 0 | 0 |GROUPD_LOW;
used_out_bits |= (GROUPA & ~(1<<0|1<<1|1<<2)) | 0 | 0 |GROUPD_LOW;
}
/* TODO: USB p2, parw, sync ser3? */
dir_g_in_bits = gpio_in_available;
dir_g_out_bits = gpio_out_available;
/* Initialise the dir_g_shadow etc. depending on genconfig */
/* 0=input 1=output */
......@@ -868,10 +875,7 @@ static void __init gpio_init_port_g(void)
if (genconfig_shadow & IO_STATE(R_GEN_CONFIG, g24dir, out))
dir_g_shadow |= (1 << 24);
dir_g_in_bits = ~used_in_bits;
dir_g_out_bits = ~used_out_bits;
changeable_dir_g = 0x01FFFF01; /* all that can change dir */
changeable_dir_g = changeable_dir_g_mask;
changeable_dir_g &= dir_g_out_bits;
changeable_dir_g &= dir_g_in_bits;
/* Correct the bits that can change direction */
......@@ -880,6 +884,7 @@ static void __init gpio_init_port_g(void)
dir_g_in_bits &= ~changeable_dir_g;
dir_g_in_bits |= (~dir_g_shadow & changeable_dir_g);
spin_unlock_irqrestore(&gpio_lock, flags);
printk(KERN_INFO "GPIO port G: in_bits: 0x%08lX out_bits: 0x%08lX val: %08lX\n",
dir_g_in_bits, dir_g_out_bits, (unsigned long)*R_PORT_G_DATA);
......@@ -896,6 +901,7 @@ gpio_init(void)
#if defined (CONFIG_ETRAX_CSP0_LEDS)
int i;
#endif
printk("gpio init\n");
/* do the formalities */
......@@ -919,8 +925,13 @@ gpio_init(void)
#endif
#endif
gpio_init_port_g();
printk(KERN_INFO "ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002 Axis Communications AB\n");
/* The I/O interface allocation watcher will be called when
* registering it. */
if (cris_io_interface_register_watcher(ioif_watcher)){
printk(KERN_WARNING "gpio_init: Failed to install IO if allocator watcher\n");
}
printk(KERN_INFO "ETRAX 100LX GPIO driver v2.5, (c) 2001, 2002, 2003, 2004 Axis Communications AB\n");
/* We call etrax_gpio_wake_up_check() from timer interrupt and
* from cpu_idle() in kernel/process.c
* The check in cpu_idle() reduces latency from ~15 ms to ~6 ms
......
arch/cris/arch-v10/drivers/i2c.c
浏览文件 @ 7e920426
......@@ -12,6 +12,15 @@
*! don't use PB_I2C if DS1302 uses same bits,
*! use PB.
*! $Log: i2c.c,v $
*! Revision 1.13 2005/03/07 13:13:07 starvik
*! Added spinlocks to protect states etc
*!
*! Revision 1.12 2005/01/05 06:11:22 starvik
*! No need to do local_irq_disable after local_irq_save.
*!
*! Revision 1.11 2004/12/13 12:21:52 starvik
*! Added I/O and DMA allocators from Linux 2.4
*!
*! Revision 1.9 2004/08/24 06:49:14 starvik
*! Whitespace cleanup
*!
......@@ -75,7 +84,7 @@
*! (C) Copyright 1999-2002 Axis Communications AB, LUND, SWEDEN
*!
*!***************************************************************************/
/* $Id: i2c.c,v 1.9 2004/08/24 06:49:14 starvik Exp $ */
/* $Id: i2c.c,v 1.13 2005/03/07 13:13:07 starvik Exp $ */
/****************** INCLUDE FILES SECTION ***********************************/
......@@ -95,6 +104,7 @@
#include <asm/arch/svinto.h>
#include <asm/io.h>
#include <asm/delay.h>
#include <asm/arch/io_interface_mux.h>
#include "i2c.h"
......@@ -184,6 +194,7 @@ static const char i2c_name[] = "i2c";
#define i2c_delay(usecs) udelay(usecs)
static DEFINE_SPINLOCK(i2c_lock); /* Protect directions etc */
/****************** FUNCTION DEFINITION SECTION *************************/
......@@ -488,13 +499,14 @@ i2c_writereg(unsigned char theSlave, unsigned char theReg,
int error, cntr = 3;
unsigned long flags;
spin_lock(&i2c_lock);
do {
error = 0;
/*
* we don't like to be interrupted
*/
local_irq_save(flags);
local_irq_disable();
i2c_start();
/*
......@@ -538,6 +550,8 @@ i2c_writereg(unsigned char theSlave, unsigned char theReg,
i2c_delay(CLOCK_LOW_TIME);
spin_unlock(&i2c_lock);
return -error;
}
......@@ -555,13 +569,14 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
int error, cntr = 3;
unsigned long flags;
spin_lock(&i2c_lock);
do {
error = 0;
/*
* we don't like to be interrupted
*/
local_irq_save(flags);
local_irq_disable();
/*
* generate start condition
*/
......@@ -620,6 +635,8 @@ i2c_readreg(unsigned char theSlave, unsigned char theReg)
} while(error && cntr--);
spin_unlock(&i2c_lock);
return b;
}
......@@ -686,15 +703,26 @@ static struct file_operations i2c_fops = {
int __init
i2c_init(void)
{
static int res = 0;
static int first = 1;
if (!first) {
return res;
}
/* Setup and enable the Port B I2C interface */
#ifndef CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C
if ((res = cris_request_io_interface(if_i2c, "I2C"))) {
printk(KERN_CRIT "i2c_init: Failed to get IO interface\n");
return res;
}
*R_PORT_PB_I2C = port_pb_i2c_shadow |=
IO_STATE(R_PORT_PB_I2C, i2c_en, on) |
IO_FIELD(R_PORT_PB_I2C, i2c_d, 1) |
IO_FIELD(R_PORT_PB_I2C, i2c_clk, 1) |
IO_STATE(R_PORT_PB_I2C, i2c_oe_, enable);
#endif
port_pb_dir_shadow &= ~IO_MASK(R_PORT_PB_DIR, dir0);
port_pb_dir_shadow &= ~IO_MASK(R_PORT_PB_DIR, dir1);
......@@ -702,8 +730,26 @@ i2c_init(void)
*R_PORT_PB_DIR = (port_pb_dir_shadow |=
IO_STATE(R_PORT_PB_DIR, dir0, input) |
IO_STATE(R_PORT_PB_DIR, dir1, output));
#else
if ((res = cris_io_interface_allocate_pins(if_i2c,
'b',
CONFIG_ETRAX_I2C_DATA_PORT,
CONFIG_ETRAX_I2C_DATA_PORT))) {
printk(KERN_WARNING "i2c_init: Failed to get IO pin for I2C data port\n");
return res;
} else if ((res = cris_io_interface_allocate_pins(if_i2c,
'b',
CONFIG_ETRAX_I2C_CLK_PORT,
CONFIG_ETRAX_I2C_CLK_PORT))) {
cris_io_interface_free_pins(if_i2c,
'b',
CONFIG_ETRAX_I2C_DATA_PORT,
CONFIG_ETRAX_I2C_DATA_PORT);
printk(KERN_WARNING "i2c_init: Failed to get IO pin for I2C clk port\n");
}
#endif
return 0;
return res;
}
static int __init
......@@ -711,14 +757,16 @@ i2c_register(void)
{
int res;
i2c_init();
res = i2c_init();
if (res < 0)
return res;
res = register_chrdev(I2C_MAJOR, i2c_name, &i2c_fops);
if(res < 0) {
printk(KERN_ERR "i2c: couldn't get a major number.\n");
return res;
}
printk(KERN_INFO "I2C driver v2.2, (c) 1999-2001 Axis Communications AB\n");
printk(KERN_INFO "I2C driver v2.2, (c) 1999-2004 Axis Communications AB\n");
return 0;
}
......
arch/cris/arch-v10/drivers/pcf8563.c
浏览文件 @ 7e920426
......@@ -15,7 +15,7 @@
*
* Author: Tobias Anderberg <tobiasa@axis.com>.
*
* $Id: pcf8563.c,v 1.8 2004/08/24 06:42:51 starvik Exp $
* $Id: pcf8563.c,v 1.11 2005/03/07 13:13:07 starvik Exp $
*/
#include <linux/config.h>
......@@ -40,7 +40,7 @@
#define PCF8563_MAJOR 121 /* Local major number. */
#define DEVICE_NAME "rtc" /* Name which is registered in /proc/devices. */
#define PCF8563_NAME "PCF8563"
#define DRIVER_VERSION "$Revision: 1.8 $"
#define DRIVER_VERSION "$Revision: 1.11 $"
/* I2C bus slave registers. */
#define RTC_I2C_READ 0xa3
......@@ -49,6 +49,8 @@
/* Two simple wrapper macros, saves a few keystrokes. */
#define rtc_read(x) i2c_readreg(RTC_I2C_READ, x)
#define rtc_write(x,y) i2c_writereg(RTC_I2C_WRITE, x, y)
static DEFINE_SPINLOCK(rtc_lock); /* Protect state etc */
static const unsigned char days_in_month[] =
{ 0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 };
......@@ -125,9 +127,12 @@ get_rtc_time(struct rtc_time *tm)
int __init
pcf8563_init(void)
{
unsigned char ret;
int ret;
i2c_init();
if ((ret = i2c_init())) {
printk(KERN_CRIT "pcf8563_init: failed to init i2c\n");
return ret;
}
/*
* First of all we need to reset the chip. This is done by
......@@ -200,12 +205,15 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned
{
struct rtc_time tm;
spin_lock(&rtc_lock);
get_rtc_time(&tm);
if (copy_to_user((struct rtc_time *) arg, &tm, sizeof(struct rtc_time))) {
spin_unlock(&rtc_lock);
return -EFAULT;
}
spin_unlock(&rtc_lock);
return 0;
}
break;
......@@ -250,6 +258,8 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned
BIN_TO_BCD(tm.tm_min);
BIN_TO_BCD(tm.tm_sec);
tm.tm_mon |= century;
spin_lock(&rtc_lock);
rtc_write(RTC_YEAR, tm.tm_year);
rtc_write(RTC_MONTH, tm.tm_mon);
......@@ -258,6 +268,8 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned
rtc_write(RTC_MINUTES, tm.tm_min);
rtc_write(RTC_SECONDS, tm.tm_sec);
spin_unlock(&rtc_lock);
return 0;
#endif /* !CONFIG_ETRAX_RTC_READONLY */
}
......
arch/cris/arch-v10/kernel/Makefile
浏览文件 @ 7e920426
# $Id: Makefile,v 1.5 2004/06/02 08:24:38 starvik Exp $
# $Id: Makefile,v 1.6 2004/12/13 12:21:51 starvik Exp $
#
# Makefile for the linux kernel.
#
......@@ -7,7 +7,8 @@ extra-y := head.o
obj-y := entry.o traps.o shadows.o debugport.o irq.o \
process.o setup.o signal.o traps.o time.o ptrace.o
process.o setup.o signal.o traps.o time.o ptrace.o \
dma.o io_interface_mux.o
obj-$(CONFIG_ETRAX_KGDB) += kgdb.o
obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o
......
arch/cris/arch-v10/kernel/fasttimer.c
浏览文件 @ 7e920426
/* $Id: fasttimer.c,v 1.6 2004/05/14 10:18:39 starvik Exp $
/* $Id: fasttimer.c,v 1.9 2005/03/04 08:16:16 starvik Exp $
* linux/arch/cris/kernel/fasttimer.c
*
* Fast timers for ETRAX100/ETRAX100LX
* This may be useful in other OS than Linux so use 2 space indentation...
*
* $Log: fasttimer.c,v $
* Revision 1.9 2005/03/04 08:16:16 starvik
* Merge of Linux 2.6.11.
*
* Revision 1.8 2005/01/05 06:09:29 starvik
* cli()/sti() will be obsolete in 2.6.11.
*
* Revision 1.7 2005/01/03 13:35:46 starvik
* Removed obsolete stuff.
* Mark fast timer IRQ as not shared.
*
* Revision 1.6 2004/05/14 10:18:39 starvik
* Export fast_timer_list
*
......@@ -148,8 +158,7 @@ static int debug_log_cnt_wrapped = 0;
#define DEBUG_LOG(string, value) \
{ \
unsigned long log_flags; \
save_flags(log_flags); \
cli(); \
local_irq_save(log_flags); \
debug_log_string[debug_log_cnt] = (string); \
debug_log_value[debug_log_cnt] = (unsigned long)(value); \
if (++debug_log_cnt >= DEBUG_LOG_MAX) \
......@@ -157,7 +166,7 @@ static int debug_log_cnt_wrapped = 0;
debug_log_cnt = debug_log_cnt % DEBUG_LOG_MAX; \
debug_log_cnt_wrapped = 1; \
} \
restore_flags(log_flags); \
local_irq_restore(log_flags); \
}
#else
#define DEBUG_LOG(string, value)
......@@ -320,8 +329,7 @@ void start_one_shot_timer(struct fast_timer *t,
D1(printk("sft %s %d us\n", name, delay_us));
save_flags(flags);
cli();
local_irq_save(flags);
do_gettimeofday_fast(&t->tv_set);
tmp = fast_timer_list;
......@@ -395,7 +403,7 @@ void start_one_shot_timer(struct fast_timer *t,
D2(printk("start_one_shot_timer: %d us done\n", delay_us));
restore_flags(flags);
local_irq_restore(flags);
} /* start_one_shot_timer */
static inline int fast_timer_pending (const struct fast_timer * t)
......@@ -425,11 +433,10 @@ int del_fast_timer(struct fast_timer * t)
unsigned long flags;
int ret;
save_flags(flags);
cli();
local_irq_save(flags);
ret = detach_fast_timer(t);
t->next = t->prev = NULL;
restore_flags(flags);
local_irq_restore(flags);
return ret;
} /* del_fast_timer */
......@@ -444,8 +451,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
struct fast_timer *t;
unsigned long flags;
save_flags(flags);
cli();
local_irq_save(flags);
/* Clear timer1 irq */
*R_IRQ_MASK0_CLR = IO_STATE(R_IRQ_MASK0_CLR, timer1, clr);
......@@ -462,7 +468,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
fast_timer_running = 0;
fast_timer_ints++;
restore_flags(flags);
local_irq_restore(flags);
t = fast_timer_list;
while (t)
......@@ -482,8 +488,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
fast_timers_expired++;
/* Remove this timer before call, since it may reuse the timer */
save_flags(flags);
cli();
local_irq_save(flags);
if (t->prev)
{
t->prev->next = t->next;
......@@ -498,7 +503,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
}
t->prev = NULL;
t->next = NULL;
restore_flags(flags);
local_irq_restore(flags);
if (t->function != NULL)
{
......@@ -515,8 +520,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
D1(printk(".\n"));
}
save_flags(flags);
cli();
local_irq_save(flags);
if ((t = fast_timer_list) != NULL)
{
/* Start next timer.. */
......@@ -535,7 +539,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
#endif
start_timer1(us);
}
restore_flags(flags);
local_irq_restore(flags);
break;
}
else
......@@ -546,7 +550,7 @@ timer1_handler(int irq, void *dev_id, struct pt_regs *regs)
D1(printk("e! %d\n", us));
}
}
restore_flags(flags);
local_irq_restore(flags);
}
if (!t)
......@@ -748,13 +752,12 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
#endif
used += sprintf(bigbuf + used, "Active timers:\n");
save_flags(flags);
cli();
local_irq_save(flags);
t = fast_timer_list;
while (t != NULL && (used+100 < BIG_BUF_SIZE))
{
nextt = t->next;
restore_flags(flags);
local_irq_restore(flags);
used += sprintf(bigbuf + used, "%-14s s: %6lu.%06lu e: %6lu.%06lu "
"d: %6li us data: 0x%08lX"
/* " func: 0x%08lX" */
......@@ -768,14 +771,14 @@ static int proc_fasttimer_read(char *buf, char **start, off_t offset, int len
t->data
/* , t->function */
);
cli();
local_irq_disable();
if (t->next != nextt)
{
printk(KERN_WARNING "timer removed!\n");
}
t = nextt;
}
restore_flags(flags);
local_irq_restore(flags);
}
if (used - offset < len)
......@@ -963,7 +966,7 @@ void fast_timer_init(void)
if ((fasttimer_proc_entry = create_proc_entry( "fasttimer", 0, 0 )))
fasttimer_proc_entry->read_proc = proc_fasttimer_read;
#endif /* PROC_FS */
if(request_irq(TIMER1_IRQ_NBR, timer1_handler, SA_SHIRQ,
if(request_irq(TIMER1_IRQ_NBR, timer1_handler, 0,
"fast timer int", NULL))
{
printk("err: timer1 irq\n");
......
include/asm-cris/arch-v10/ide.h 0 → 100644
浏览文件 @ 7e920426
/*
* linux/include/asm-cris/ide.h
*
* Copyright (C) 2000, 2001, 2002 Axis Communications AB
*
* Authors: Bjorn Wesen
*
*/
/*
* This file contains the ETRAX 100LX specific IDE code.
*/
#ifndef __ASMCRIS_IDE_H
#define __ASMCRIS_IDE_H
#ifdef __KERNEL__
#include <asm/arch/svinto.h>
#include <asm/io.h>
#include <asm-generic/ide_iops.h>
/* ETRAX 100 can support 4 IDE busses on the same pins (serialized) */
#define MAX_HWIFS 4
extern __inline__ int ide_default_irq(unsigned long base)
{
/* all IDE busses share the same IRQ, number 4.
* this has the side-effect that ide-probe.c will cluster our 4 interfaces
* together in a hwgroup, and will serialize accesses. this is good, because
* we can't access more than one interface at the same time on ETRAX100.
*/
return 4;
}
extern __inline__ unsigned long ide_default_io_base(int index)
{
/* we have no real I/O base address per interface, since all go through the
* same register. but in a bitfield in that register, we have the i/f number.
* so we can use the io_base to remember that bitfield.
*/
static const unsigned long io_bases[MAX_HWIFS] = {
IO_FIELD(R_ATA_CTRL_DATA, sel, 0),
IO_FIELD(R_ATA_CTRL_DATA, sel, 1),
IO_FIELD(R_ATA_CTRL_DATA, sel, 2),
IO_FIELD(R_ATA_CTRL_DATA, sel, 3)
};
return io_bases[index];
}
/* this is called once for each interface, to setup the port addresses. data_port is the result
* of the ide_default_io_base call above. ctrl_port will be 0, but that is don't care for us.
*/
extern __inline__ void ide_init_hwif_ports(hw_regs_t *hw, unsigned long data_port, unsigned long ctrl_port, int *irq)
{
int i;
/* fill in ports for ATA addresses 0 to 7 */
for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) {
hw->io_ports[i] = data_port |
IO_FIELD(R_ATA_CTRL_DATA, addr, i) |
IO_STATE(R_ATA_CTRL_DATA, cs0, active);
}
/* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */
hw->io_ports[IDE_CONTROL_OFFSET] = data_port |
IO_FIELD(R_ATA_CTRL_DATA, addr, 6) |
IO_STATE(R_ATA_CTRL_DATA, cs1, active);
/* whats this for ? */
hw->io_ports[IDE_IRQ_OFFSET] = 0;
}
extern __inline__ void ide_init_default_hwifs(void)
{
hw_regs_t hw;
int index;
for(index = 0; index < MAX_HWIFS; index++) {
ide_init_hwif_ports(&hw, ide_default_io_base(index), 0, NULL);
hw.irq = ide_default_irq(ide_default_io_base(index));
ide_register_hw(&hw, NULL);
}
}
/* some configuration options we don't need */
#undef SUPPORT_VLB_SYNC
#define SUPPORT_VLB_SYNC 0
#endif /* __KERNEL__ */
#endif /* __ASMCRIS_IDE_H */
include/asm-cris/ide.h 0 → 100644
浏览文件 @ 7e920426
#include <asm/arch/ide.h>
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或