pinctrl: mvebu: pinctrl driver core

This patch adds a pinctrl driver core for Marvell SoCs plus DT
binding documentation. This core driver will be used by SoC family
specific drivers, i.e. Armada XP, Armada 370, Dove, Kirkwood, aso.
Signed-off-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: NStephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

Conflicts:

	arch/arm/Kconfig

Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt

+* Marvell SoC pinctrl core driver for mpp
+
+The pinctrl driver enables Marvell SoCs to configure the multi-purpose pins
+(mpp) to a specific function. For each SoC family there is a SoC specific
+driver using this core driver.
+
+Please refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning of the
+phrase "pin configuration node".
+
+A Marvell SoC pin configuration node is a node of a group of pins which can
+be used for a specific device or function. Each node requires one or more
+mpp pins or group of pins and a mpp function common to all pins.
+
+Required properties for pinctrl driver:
+- compatible: "marvell,<soc>-pinctrl"
+  Please refer to each marvell,<soc>-pinctrl.txt binding doc for supported SoCs.
+
+Required properties for pin configuration node:
+- marvell,pins: string array of mpp pins or group of pins to be muxed.
+- marvell,function: string representing a function to mux to for all
+    marvell,pins given in this pin configuration node. The function has to be
+    common for all marvell,pins. Please refer to marvell,<soc>-pinctrl.txt for
+    valid pin/pin group names and available function names for each SoC.
+
+Examples:
+
+uart1: serial@12100 {
+	compatible = "ns16550a";
+	reg = <0x12100 0x100>;
+	reg-shift = <2>;
+	interrupts = <7>;
+
+	pinctrl-0 = <&pmx_uart1_sw>;
+	pinctrl-names = "default";
+};
+
+pinctrl: pinctrl@d0200 {
+	compatible = "marvell,dove-pinctrl";
+	reg = <0xd0200 0x20>;
+
+	pmx_uart1_sw: pmx-uart1-sw {
+		marvell,pins = "mpp_uart1";
+		marvell,function = "uart1";
+	};
+};

arch/arm/Kconfig

@@ -568,6 +568,7 @@ config ARCH_MVEBU
 	select IRQ_DOMAIN
 	select COMMON_CLK
 	select PLAT_ORION
+	select PINCTRL
 	help
 	  Support for the Marvell SoC Family with device tree support
 

drivers/pinctrl/Kconfig

@@ -145,6 +145,12 @@ config PINCTRL_COH901
 	  COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
 	  ports of 8 GPIO pins each.
 
+config PINCTRL_MVEBU
+	bool
+	depends on ARCH_MVEBU
+	select PINMUX
+	select PINCONF
+
 source "drivers/pinctrl/spear/Kconfig"
 
 endmenu

drivers/pinctrl/Makefile

@@ -29,5 +29,6 @@ obj-$(CONFIG_PINCTRL_TEGRA20)	+= pinctrl-tegra20.o
 obj-$(CONFIG_PINCTRL_TEGRA30)	+= pinctrl-tegra30.o
 obj-$(CONFIG_PINCTRL_U300)	+= pinctrl-u300.o
 obj-$(CONFIG_PINCTRL_COH901)	+= pinctrl-coh901.o
+obj-$(CONFIG_PINCTRL_MVEBU)	+= pinctrl-mvebu.o
 
 obj-$(CONFIG_PLAT_SPEAR)	+= spear/

drivers/pinctrl/pinctrl-mvebu.h

+/*
+ * Marvell MVEBU pinctrl driver
+ *
+ * Authors: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *          Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __PINCTRL_MVEBU_H__
+#define __PINCTRL_MVEBU_H__
+
+/**
+ * struct mvebu_mpp_ctrl - describe a mpp control
+ * @name: name of the control group
+ * @pid: first pin id handled by this control
+ * @npins: number of pins controlled by this control
+ * @mpp_get: (optional) special function to get mpp setting
+ * @mpp_set: (optional) special function to set mpp setting
+ * @mpp_gpio_req: (optional) special function to request gpio
+ * @mpp_gpio_dir: (optional) special function to set gpio direction
+ *
+ * A mpp_ctrl describes a muxable unit, e.g. pin, group of pins, or
+ * internal function, inside the SoC. Each muxable unit can be switched
+ * between two or more different settings, e.g. assign mpp pin 13 to
+ * uart1 or sata.
+ *
+ * If optional mpp_get/_set functions are set these are used to get/set
+ * a specific mode. Otherwise it is assumed that the mpp control is based
+ * on 4-bit groups in subsequent registers. The optional mpp_gpio_req/_dir
+ * functions can be used to allow pin settings with varying gpio pins.
+ */
+struct mvebu_mpp_ctrl {
+	const char *name;
+	u8 pid;
+	u8 npins;
+	unsigned *pins;
+	int (*mpp_get)(struct mvebu_mpp_ctrl *ctrl, unsigned long *config);
+	int (*mpp_set)(struct mvebu_mpp_ctrl *ctrl, unsigned long config);
+	int (*mpp_gpio_req)(struct mvebu_mpp_ctrl *ctrl, u8 pid);
+	int (*mpp_gpio_dir)(struct mvebu_mpp_ctrl *ctrl, u8 pid, bool input);
+};
+
+/**
+ * struct mvebu_mpp_ctrl_setting - describe a mpp ctrl setting
+ * @val: ctrl setting value
+ * @name: ctrl setting name, e.g. uart2, spi0 - unique per mpp_mode
+ * @subname: (optional) additional ctrl setting name, e.g. rts, cts
+ * @variant: (optional) variant identifier mask
+ * @flags: (private) flags to store gpi/gpo/gpio capabilities
+ *
+ * A ctrl_setting describes a specific internal mux function that a mpp pin
+ * can be switched to. The value (val) will be written in the corresponding
+ * register for common mpp pin configuration registers on MVEBU. SoC specific
+ * mpp_get/_set function may use val to distinguish between different settings.
+ *
+ * The name will be used to switch to this setting in DT description, e.g.
+ * marvell,function = "uart2". subname is only for debugging purposes.
+ *
+ * If name is one of "gpi", "gpo", "gpio" gpio capabilities are
+ * parsed during initialization and stored in flags.
+ *
+ * The variant can be used to combine different revisions of one SoC to a
+ * common pinctrl driver. It is matched (AND) with variant of soc_info to
+ * determine if a setting is available on the current SoC revision.
+ */
+struct mvebu_mpp_ctrl_setting {
+	u8 val;
+	const char *name;
+	const char *subname;
+	u8 variant;
+	u8 flags;
+#define  MVEBU_SETTING_GPO	(1 << 0)
+#define  MVEBU_SETTING_GPI	(1 << 1)
+};
+
+/**
+ * struct mvebu_mpp_mode - link ctrl and settings
+ * @pid: first pin id handled by this mode
+ * @settings: list of settings available for this mode
+ *
+ * A mode connects all available settings with the corresponding mpp_ctrl
+ * given by pid.
+ */
+struct mvebu_mpp_mode {
+	u8 pid;
+	struct mvebu_mpp_ctrl_setting *settings;
+};
+
+/**
+ * struct mvebu_pinctrl_soc_info - SoC specific info passed to pinctrl-mvebu
+ * @variant: variant mask of soc_info
+ * @controls: list of available mvebu_mpp_ctrls
+ * @ncontrols: number of available mvebu_mpp_ctrls
+ * @modes: list of available mvebu_mpp_modes
+ * @nmodes: number of available mvebu_mpp_modes
+ * @gpioranges: list of pinctrl_gpio_ranges
+ * @ngpioranges: number of available pinctrl_gpio_ranges
+ *
+ * This struct describes all pinctrl related information for a specific SoC.
+ * If variant is unequal 0 it will be matched (AND) with variant of each
+ * setting and allows to distinguish between different revisions of one SoC.
+ */
+struct mvebu_pinctrl_soc_info {
+	u8 variant;
+	struct mvebu_mpp_ctrl *controls;
+	int ncontrols;
+	struct mvebu_mpp_mode *modes;
+	int nmodes;
+	struct pinctrl_gpio_range *gpioranges;
+	int ngpioranges;
+};
+
+#define MPP_REG_CTRL(_idl, _idh)				\
+	{							\
+		.name = NULL,					\
+		.pid = _idl,					\
+		.npins = _idh - _idl + 1,			\
+		.pins = (unsigned[_idh - _idl + 1]) { },	\
+		.mpp_get = NULL,				\
+		.mpp_set = NULL,				\
+		.mpp_gpio_req = NULL,				\
+		.mpp_gpio_dir = NULL,				\
+	}
+
+#define MPP_FUNC_CTRL(_idl, _idh, _name, _func)			\
+	{							\
+		.name = _name,					\
+		.pid = _idl,					\
+		.npins = _idh - _idl + 1,			\
+		.pins = (unsigned[_idh - _idl + 1]) { },	\
+		.mpp_get = _func ## _get,			\
+		.mpp_set = _func ## _set,			\
+		.mpp_gpio_req = NULL,				\
+		.mpp_gpio_dir = NULL,				\
+	}
+
+#define MPP_FUNC_GPIO_CTRL(_idl, _idh, _name, _func)		\
+	{							\
+		.name = _name,					\
+		.pid = _idl,					\
+		.npins = _idh - _idl + 1,			\
+		.pins = (unsigned[_idh - _idl + 1]) { },	\
+		.mpp_get = _func ## _get,			\
+		.mpp_set = _func ## _set,			\
+		.mpp_gpio_req = _func ## _gpio_req,		\
+		.mpp_gpio_dir = _func ## _gpio_dir,		\
+	}
+
+#define _MPP_VAR_FUNCTION(_val, _name, _subname, _mask)		\
+	{							\
+		.val = _val,					\
+		.name = _name,					\
+		.subname = _subname,				\
+		.variant = _mask,				\
+		.flags = 0,					\
+	}
+
+#if defined(CONFIG_DEBUG_FS)
+#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask)		\
+	_MPP_VAR_FUNCTION(_val, _name, _subname, _mask)
+#else
+#define MPP_VAR_FUNCTION(_val, _name, _subname, _mask)		\
+	_MPP_VAR_FUNCTION(_val, _name, NULL, _mask)
+#endif
+
+#define MPP_FUNCTION(_val, _name, _subname)			\
+	MPP_VAR_FUNCTION(_val, _name, _subname, (u8)-1)
+
+#define MPP_MODE(_id, ...)					\
+	{							\
+		.pid = _id,					\
+		.settings = (struct mvebu_mpp_ctrl_setting[]){	\
+			__VA_ARGS__, { } },			\
+	}
+
+#define MPP_GPIO_RANGE(_id, _pinbase, _gpiobase, _npins)	\
+	{							\
+		.name = "mvebu-gpio",				\
+		.id = _id,					\
+		.pin_base = _pinbase,				\
+		.base = _gpiobase,				\
+		.npins = _npins,				\
+	}
+
+int mvebu_pinctrl_probe(struct platform_device *pdev);
+int mvebu_pinctrl_remove(struct platform_device *pdev);
+
+#endif