EMAC driver: define MDC_CLK=2.5MHz and caculate mdc_div according to SCLK.

Signed-off-by: NBryan Wu <bryan.wu@analog.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/bfin_mac.c

@@ -412,20 +412,26 @@ static void bf537_adjust_link(struct net_device *dev)
 	spin_unlock_irqrestore(&lp->lock, flags);
 }
 
+/* MDC  = 2.5 MHz */
+#define MDC_CLK 2500000
+
 static int mii_probe(struct net_device *dev)
 {
 	struct bf537mac_local *lp = netdev_priv(dev);
 	struct phy_device *phydev = NULL;
 	unsigned short sysctl;
 	int i;
+	u32 sclk, mdc_div;
 
 	/* Enable PHY output early */
 	if (!(bfin_read_VR_CTL() & PHYCLKOE))
 		bfin_write_VR_CTL(bfin_read_VR_CTL() | PHYCLKOE);
 
-	/* MDC  = 2.5 MHz */
+	sclk = get_sclk();
+	mdc_div = ((sclk / MDC_CLK) / 2) - 1;
+
 	sysctl = bfin_read_EMAC_SYSCTL();
-	sysctl |= SET_MDCDIV(24);
+	sysctl |= SET_MDCDIV(mdc_div);
 	bfin_write_EMAC_SYSCTL(sysctl);
 
 	/* search for connect PHY device */
@@ -477,8 +483,10 @@ static int mii_probe(struct net_device *dev)
 	lp->phydev = phydev;
 
 	printk(KERN_INFO "%s: attached PHY driver [%s] "
-	       "(mii_bus:phy_addr=%s, irq=%d)\n",
-	       DRV_NAME, phydev->drv->name, phydev->dev.bus_id, phydev->irq);
+	       "(mii_bus:phy_addr=%s, irq=%d, mdc_clk=%dHz(mdc_div=%d)"
+	       "@sclk=%dMHz)\n",
+	       DRV_NAME, phydev->drv->name, phydev->dev.bus_id, phydev->irq,
+	       MDC_CLK, mdc_div, sclk/1000000);
 
 	return 0;
 }