drm/i915: Remove save/restore logic from intel_crtc_set_config()

This is no longer necessary since we only update the staged config on
successfull modeset. The new configuration is stored in an atomic state
struct which is freed in case of failure.
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/intel_display.c

@@ -12549,91 +12549,6 @@ void intel_crtc_restore_mode(struct drm_crtc *crtc)
 
 #undef for_each_intel_crtc_masked
 
-static void intel_set_config_free(struct intel_set_config *config)
-{
-	if (!config)
-		return;
-
-	kfree(config->save_connector_encoders);
-	kfree(config->save_encoder_crtcs);
-	kfree(config->save_crtc_enabled);
-	kfree(config);
-}
-
-static int intel_set_config_save_state(struct drm_device *dev,
-				       struct intel_set_config *config)
-{
-	struct drm_crtc *crtc;
-	struct drm_encoder *encoder;
-	struct drm_connector *connector;
-	int count;
-
-	config->save_crtc_enabled =
-		kcalloc(dev->mode_config.num_crtc,
-			sizeof(bool), GFP_KERNEL);
-	if (!config->save_crtc_enabled)
-		return -ENOMEM;
-
-	config->save_encoder_crtcs =
-		kcalloc(dev->mode_config.num_encoder,
-			sizeof(struct drm_crtc *), GFP_KERNEL);
-	if (!config->save_encoder_crtcs)
-		return -ENOMEM;
-
-	config->save_connector_encoders =
-		kcalloc(dev->mode_config.num_connector,
-			sizeof(struct drm_encoder *), GFP_KERNEL);
-	if (!config->save_connector_encoders)
-		return -ENOMEM;
-
-	/* Copy data. Note that driver private data is not affected.
-	 * Should anything bad happen only the expected state is
-	 * restored, not the drivers personal bookkeeping.
-	 */
-	count = 0;
-	for_each_crtc(dev, crtc) {
-		config->save_crtc_enabled[count++] = crtc->state->enable;
-	}
-
-	count = 0;
-	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
-		config->save_encoder_crtcs[count++] = encoder->crtc;
-	}
-
-	count = 0;
-	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-		config->save_connector_encoders[count++] = connector->encoder;
-	}
-
-	return 0;
-}
-
-static void intel_set_config_restore_state(struct drm_device *dev,
-					   struct intel_set_config *config)
-{
-	struct intel_crtc *crtc;
-	struct intel_encoder *encoder;
-	struct intel_connector *connector;
-	int count;
-
-	count = 0;
-	for_each_intel_crtc(dev, crtc) {
-		crtc->new_enabled = config->save_crtc_enabled[count++];
-	}
-
-	count = 0;
-	for_each_intel_encoder(dev, encoder) {
-		encoder->new_crtc =
-			to_intel_crtc(config->save_encoder_crtcs[count++]);
-	}
-
-	count = 0;
-	for_each_intel_connector(dev, connector) {
-		connector->new_encoder =
-			to_intel_encoder(config->save_connector_encoders[count++]);
-	}
-}
-
 static bool
 is_crtc_connector_off(struct drm_mode_set *set)
 {
@@ -12872,7 +12787,6 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
 {
 	struct drm_device *dev;
 	struct drm_atomic_state *state = NULL;
-	struct intel_set_config *config;
 	struct intel_crtc_state *pipe_config;
 	bool primary_plane_was_visible;
 	int ret;
@@ -12895,37 +12809,26 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
 
 	dev = set->crtc->dev;
 
-	ret = -ENOMEM;
-	config = kzalloc(sizeof(*config), GFP_KERNEL);
-	if (!config)
-		goto out_config;
-
-	ret = intel_set_config_save_state(dev, config);
-	if (ret)
-		goto out_config;
-
 	state = drm_atomic_state_alloc(dev);
-	if (!state) {
-		ret = -ENOMEM;
-		goto out_config;
-	}
+	if (!state)
+		return -ENOMEM;
 
 	state->acquire_ctx = dev->mode_config.acquire_ctx;
 
 	ret = intel_modeset_stage_output_state(dev, set, state);
 	if (ret)
-		goto fail;
+		goto out;
 
 	ret = intel_modeset_setup_plane_state(state, set->crtc, set->mode,
 					      set->fb, set->x, set->y);
 	if (ret)
-		goto fail;
+		goto out;
 
 	pipe_config = intel_modeset_compute_config(set->crtc, set->mode,
 						   state);
 	if (IS_ERR(pipe_config)) {
 		ret = PTR_ERR(pipe_config);
-		goto fail;
+		goto out;
 	}
 
 	/* Compute whether we need a full modeset, only an fb base update or no
@@ -12972,14 +12875,10 @@ static int intel_crtc_set_config(struct drm_mode_set *set)
 	if (ret) {
 		DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n",
 			      set->crtc->base.id, ret);
-fail:
-		intel_set_config_restore_state(dev, config);
 	}
 
-out_config:
+out:
 	drm_atomic_state_free(state);
-
-	intel_set_config_free(config);
 	return ret;
 }
 

drivers/gpu/drm/i915/intel_drv.h

@@ -813,15 +813,6 @@ struct intel_unpin_work {
 	bool enable_stall_check;
 };
 
-struct intel_set_config {
-	struct drm_encoder **save_connector_encoders;
-	struct drm_crtc **save_encoder_crtcs;
-	bool *save_crtc_enabled;
-
-	bool fb_changed;
-	bool mode_changed;
-};
-
 struct intel_load_detect_pipe {
 	struct drm_framebuffer *release_fb;
 	bool load_detect_temp;