cfg80211: add flags for off-channel capabilities

Currently mac80211 implements these for all devices,
but given restrictions of some devices that isn't
really true, so prepare for being able to remove the
capability for some mac80211 devices.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Acked-by: NKalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/ath/ath6kl/init.c

@@ -1602,7 +1602,8 @@ int ath6kl_core_init(struct ath6kl *ar)
 		ar->conf_flags |= ATH6KL_CONF_SUSPEND_CUTPOWER;
 
 	ar->wiphy->flags |= WIPHY_FLAG_SUPPORTS_FW_ROAM |
-			    WIPHY_FLAG_HAVE_AP_SME;
+			    WIPHY_FLAG_HAVE_AP_SME |
+			    WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
 
 	set_bit(FIRST_BOOT, &ar->flag);
 

include/net/cfg80211.h

@@ -1700,6 +1700,8 @@ struct cfg80211_ops {
  *	cfg80211_report_obss_beacon().
  * @WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD: When operating as an AP, the device
  *	responds to probe-requests in hardware.
+ * @WIPHY_FLAG_OFFCHAN_TX: Device supports direct off-channel TX.
+ * @WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL: Device supports remain-on-channel call.
  */
 enum wiphy_flags {
 	WIPHY_FLAG_CUSTOM_REGULATORY		= BIT(0),
@@ -1721,6 +1723,8 @@ enum wiphy_flags {
 	WIPHY_FLAG_HAVE_AP_SME			= BIT(17),
 	WIPHY_FLAG_REPORTS_OBSS			= BIT(18),
 	WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD	= BIT(19),
+	WIPHY_FLAG_OFFCHAN_TX			= BIT(20),
+	WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL	= BIT(21),
 };
 
 /**

net/mac80211/main.c

@@ -594,7 +594,9 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
 	wiphy->flags |= WIPHY_FLAG_NETNS_OK |
 			WIPHY_FLAG_4ADDR_AP |
 			WIPHY_FLAG_4ADDR_STATION |
-			WIPHY_FLAG_REPORTS_OBSS;
+			WIPHY_FLAG_REPORTS_OBSS |
+			WIPHY_FLAG_OFFCHAN_TX |
+			WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
 
 	wiphy->features = NL80211_FEATURE_SK_TX_STATUS;
 

net/wireless/nl80211.c

@@ -882,7 +882,8 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 	CMD(set_pmksa, SET_PMKSA);
 	CMD(del_pmksa, DEL_PMKSA);
 	CMD(flush_pmksa, FLUSH_PMKSA);
-	CMD(remain_on_channel, REMAIN_ON_CHANNEL);
+	if (dev->wiphy.flags & WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL)
+		CMD(remain_on_channel, REMAIN_ON_CHANNEL);
 	CMD(set_bitrate_mask, SET_TX_BITRATE_MASK);
 	CMD(mgmt_tx, FRAME);
 	CMD(mgmt_tx_cancel_wait, FRAME_WAIT_CANCEL);
@@ -922,11 +923,12 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags,
 
 	nla_nest_end(msg, nl_cmds);
 
-	if (dev->ops->remain_on_channel)
+	if (dev->ops->remain_on_channel &&
+	    dev->wiphy.flags & WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL)
 		NLA_PUT_U32(msg, NL80211_ATTR_MAX_REMAIN_ON_CHANNEL_DURATION,
 			    dev->wiphy.max_remain_on_channel_duration);
 
-	if (dev->ops->mgmt_tx_cancel_wait)
+	if (dev->wiphy.flags & WIPHY_FLAG_OFFCHAN_TX)
 		NLA_PUT_FLAG(msg, NL80211_ATTR_OFFCHANNEL_TX_OK);
 
 	if (mgmt_stypes) {
@@ -5127,7 +5129,8 @@ static int nl80211_remain_on_channel(struct sk_buff *skb,
 	    duration > rdev->wiphy.max_remain_on_channel_duration)
 		return -EINVAL;
 
-	if (!rdev->ops->remain_on_channel)
+	if (!rdev->ops->remain_on_channel ||
+	    !(rdev->wiphy.flags & WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL))
 		return -EOPNOTSUPP;
 
 	if (info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]) {
@@ -5340,7 +5343,7 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info)
 		return -EOPNOTSUPP;
 
 	if (info->attrs[NL80211_ATTR_DURATION]) {
-		if (!rdev->ops->mgmt_tx_cancel_wait)
+		if (!(rdev->wiphy.flags & WIPHY_FLAG_OFFCHAN_TX))
 			return -EINVAL;
 		wait = nla_get_u32(info->attrs[NL80211_ATTR_DURATION]);
 	}
@@ -5358,6 +5361,9 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info)
 
 	offchan = info->attrs[NL80211_ATTR_OFFCHANNEL_TX_OK];
 
+	if (offchan && !(rdev->wiphy.flags & WIPHY_FLAG_OFFCHAN_TX))
+		return -EINVAL;
+
 	no_cck = nla_get_flag(info->attrs[NL80211_ATTR_TX_NO_CCK_RATE]);
 
 	freq = nla_get_u32(info->attrs[NL80211_ATTR_WIPHY_FREQ]);