Merge branch 'restart' into for-linus

Conflicts:
	arch/arm/mach-exynos/cpu.c

The changes to arch/arm/mach-exynos/cpu.c were moved to
mach-exynos/common.c.

MAINTAINERS

@@ -1124,13 +1124,6 @@ S:	Supported
 F:	arch/arm/mach-shmobile/
 F:	drivers/sh/
 
-ARM/TELECHIPS ARM ARCHITECTURE
-M:	"Hans J. Koch" <hjk@hansjkoch.de>
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-F:	arch/arm/plat-tcc/
-F:	arch/arm/mach-tcc8k/
-
 ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)

arch/arm/Kconfig

@@ -877,16 +877,6 @@ config ARCH_SHARK
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
 
-config ARCH_TCC_926
-	bool "Telechips TCC ARM926-based systems"
-	select CLKSRC_MMIO
-	select CPU_ARM926T
-	select HAVE_CLK
-	select CLKDEV_LOOKUP
-	select GENERIC_CLOCKEVENTS
-	help
-	  Support for Telechips TCC ARM926-based systems.
-
 config ARCH_U300
 	bool "ST-Ericsson U300 Series"
 	depends on MMU
@@ -1073,8 +1063,6 @@ source "arch/arm/plat-s5p/Kconfig"
 
 source "arch/arm/plat-spear/Kconfig"
 
-source "arch/arm/plat-tcc/Kconfig"
-
 if ARCH_S3C2410
 source "arch/arm/mach-s3c2410/Kconfig"
 source "arch/arm/mach-s3c2412/Kconfig"

arch/arm/Makefile

@@ -184,7 +184,6 @@ machine-$(CONFIG_ARCH_EXYNOS4)		:= exynos
 machine-$(CONFIG_ARCH_SA1100)		:= sa1100
 machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_SHMOBILE) 	:= shmobile
-machine-$(CONFIG_ARCH_TCC8K)		:= tcc8k
 machine-$(CONFIG_ARCH_TEGRA)		:= tegra
 machine-$(CONFIG_ARCH_U300)		:= u300
 machine-$(CONFIG_ARCH_U8500)		:= ux500
@@ -204,7 +203,6 @@ machine-$(CONFIG_ARCH_ZYNQ)		:= zynq
 plat-$(CONFIG_ARCH_MXC)		:= mxc
 plat-$(CONFIG_ARCH_OMAP)	:= omap
 plat-$(CONFIG_ARCH_S3C64XX)	:= samsung
-plat-$(CONFIG_ARCH_TCC_926)	:= tcc
 plat-$(CONFIG_ARCH_ZYNQ)	:= versatile
 plat-$(CONFIG_PLAT_IOP)		:= iop
 plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik

arch/arm/include/asm/hardware/iop3xx.h

@@ -234,6 +234,7 @@ extern int iop3xx_get_init_atu(void);
 void iop3xx_map_io(void);
 void iop_init_cp6_handler(void);
 void iop_init_time(unsigned long tickrate);
+void iop3xx_restart(char, const char *);
 
 static inline u32 read_tmr0(void)
 {

arch/arm/include/asm/system.h

@@ -108,7 +108,6 @@ extern void __show_regs(struct pt_regs *);
 extern int __pure cpu_architecture(void);
 extern void cpu_init(void);
 
-void arm_machine_restart(char mode, const char *cmd);
 void soft_restart(unsigned long);
 extern void (*arm_pm_restart)(char str, const char *cmd);
 

arch/arm/kernel/process.c

@@ -147,14 +147,8 @@ void soft_restart(unsigned long addr)
 	BUG();
 }
 
-void arm_machine_restart(char mode, const char *cmd)
+static void null_restart(char mode, const char *cmd)
 {
-	/* Disable interrupts first */
-	local_irq_disable();
-	local_fiq_disable();
-
-	/* Call the architecture specific reboot code. */
-	arch_reset(mode, cmd);
 }
 
 /*
@@ -163,7 +157,7 @@ void arm_machine_restart(char mode, const char *cmd)
 void (*pm_power_off)(void);
 EXPORT_SYMBOL(pm_power_off);
 
-void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart;
+void (*arm_pm_restart)(char str, const char *cmd) = null_restart;
 EXPORT_SYMBOL_GPL(arm_pm_restart);
 
 static void do_nothing(void *unused)

arch/arm/mach-at91/at91cap9.c

@@ -313,7 +313,7 @@ static struct at91_gpio_bank at91cap9_gpio[] = {
 	}
 };
 
-static void at91cap9_reset(void)
+static void at91cap9_restart(char mode, const char *cmd)
 {
 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
@@ -335,7 +335,7 @@ static void __init at91cap9_map_io(void)
 
 static void __init at91cap9_initialize(void)
 {
-	at91_arch_reset = at91cap9_reset;
+	arm_pm_restart = at91cap9_restart;
 	pm_power_off = at91cap9_poweroff;
 	at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
 

arch/arm/mach-at91/at91rm9200.c

@@ -288,7 +288,7 @@ static struct at91_gpio_bank at91rm9200_gpio[] = {
 	}
 };
 
-static void at91rm9200_reset(void)
+static void at91rm9200_restart(char mode, const char *cmd)
 {
 	/*
 	 * Perform a hardware reset with the use of the Watchdog timer.
@@ -309,7 +309,7 @@ static void __init at91rm9200_map_io(void)
 
 static void __init at91rm9200_initialize(void)
 {
-	at91_arch_reset = at91rm9200_reset;
+	arm_pm_restart = at91rm9200_restart;
 	at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
 			| (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
 			| (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)

arch/arm/mach-at91/at91sam9260.c

@@ -327,7 +327,7 @@ static void __init at91sam9260_map_io(void)
 
 static void __init at91sam9260_initialize(void)
 {
-	at91_arch_reset = at91sam9_alt_reset;
+	arm_pm_restart = at91sam9_alt_restart;
 	pm_power_off = at91sam9260_poweroff;
 	at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
 			| (1 << AT91SAM9260_ID_IRQ2);

arch/arm/mach-at91/at91sam9261.c

@@ -287,7 +287,7 @@ static void __init at91sam9261_map_io(void)
 
 static void __init at91sam9261_initialize(void)
 {
-	at91_arch_reset = at91sam9_alt_reset;
+	arm_pm_restart = at91sam9_alt_restart;
 	pm_power_off = at91sam9261_poweroff;
 	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
 			| (1 << AT91SAM9261_ID_IRQ2);

arch/arm/mach-at91/at91sam9263.c

@@ -305,7 +305,7 @@ static void __init at91sam9263_map_io(void)
 
 static void __init at91sam9263_initialize(void)
 {
-	at91_arch_reset = at91sam9_alt_reset;
+	arm_pm_restart = at91sam9_alt_restart;
 	pm_power_off = at91sam9263_poweroff;
 	at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1);
 

arch/arm/mach-at91/at91sam9_alt_reset.S

@@ -14,20 +14,15 @@
  */
 
 #include <linux/linkage.h>
-#include <asm/system.h>
 #include <mach/hardware.h>
 #include <mach/at91sam9_sdramc.h>
 #include <mach/at91_rstc.h>
 
 			.arm
 
-			.globl	at91sam9_alt_reset
+			.globl	at91sam9_alt_restart
 
-at91sam9_alt_reset:	mrc	p15, 0, r0, c1, c0, 0
-			orr	r0, r0, #CR_I
-			mcr	p15, 0, r0, c1, c0, 0		@ enable I-cache
-
-			ldr	r0, .at91_va_base_sdramc	@ preload constants
+at91sam9_alt_restart:	ldr	r0, .at91_va_base_sdramc	@ preload constants
 			ldr	r1, .at91_va_base_rstc_cr
 
 			mov	r2, #1

arch/arm/mach-at91/at91sam9g45.c

@@ -317,7 +317,7 @@ static struct at91_gpio_bank at91sam9g45_gpio[] = {
 	}
 };
 
-static void at91sam9g45_reset(void)
+static void at91sam9g45_restart(char mode, const char *cmd)
 {
 	at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
 }
@@ -340,7 +340,7 @@ static void __init at91sam9g45_map_io(void)
 
 static void __init at91sam9g45_initialize(void)
 {
-	at91_arch_reset = at91sam9g45_reset;
+	arm_pm_restart = at91sam9g45_restart;
 	pm_power_off = at91sam9g45_poweroff;
 	at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0);
 

arch/arm/mach-at91/at91sam9rl.c

@@ -292,7 +292,7 @@ static void __init at91sam9rl_map_io(void)
 
 static void __init at91sam9rl_initialize(void)
 {
-	at91_arch_reset = at91sam9_alt_reset;
+	arm_pm_restart = at91sam9_alt_restart;
 	pm_power_off = at91sam9rl_poweroff;
 	at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0);
 

arch/arm/mach-at91/generic.h

@@ -57,7 +57,7 @@ extern void at91_irq_suspend(void);
 extern void at91_irq_resume(void);
 
 /* reset */
-extern void at91sam9_alt_reset(void);
+extern void at91sam9_alt_restart(char, const char *);
 
  /* GPIO */
 #define AT91RM9200_PQFP		3	/* AT91RM9200 PQFP package has 3 banks */
@@ -71,5 +71,4 @@ struct at91_gpio_bank {
 extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
 extern void __init at91_gpio_irq_setup(void);
 
-extern void (*at91_arch_reset)(void);
 extern int at91_extern_irq;

arch/arm/mach-at91/include/mach/system.h

@@ -47,13 +47,4 @@ static inline void arch_idle(void)
 #endif
 }
 
-void (*at91_arch_reset)(void);
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	/* call the CPU-specific reset function */
-	if (at91_arch_reset)
-		(at91_arch_reset)();
-}
-
 #endif

arch/arm/mach-bcmring/arch.c

@@ -49,7 +49,29 @@ HW_DECLARE_SPINLOCK(gpio)
 #endif
 
 /* sysctl */
-int bcmring_arch_warm_reboot;	/* do a warm reboot on hard reset */
+static int bcmring_arch_warm_reboot;	/* do a warm reboot on hard reset */
+
+static void bcmring_restart(char mode, const char *cmd)
+{
+	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
+
+	if (mode == 'h') {
+		/* Reboot configured in proc entry */
+		if (bcmring_arch_warm_reboot) {
+			printk("warm reset\n");
+			/* Issue Warm reset (do not reset ethernet switch, keep alive) */
+			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
+		} else {
+			/* Force reset of everything */
+			printk("force reset\n");
+			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+		}
+	} else {
+		/* Force reset of everything */
+		printk("force reset\n");
+		chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
+	}
+}
 
 static struct ctl_table_header *bcmring_sysctl_header;
 
@@ -173,4 +195,5 @@ MACHINE_START(BCMRING, "BCMRING")
 	.init_irq = bcmring_init_irq,
 	.timer = &bcmring_timer,
 	.init_machine = bcmring_init_machine
+	.restart = bcmring_restart,
 MACHINE_END

arch/arm/mach-bcmring/include/mach/system.h

@@ -20,35 +20,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/csp/chipcHw_inline.h>
-
-extern int bcmring_arch_warm_reboot;
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
-
-	if (mode == 'h') {
-		/* Reboot configured in proc entry */
-		if (bcmring_arch_warm_reboot) {
-			printk("warm reset\n");
-			/* Issue Warm reset (do not reset ethernet switch, keep alive) */
-			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM);
-		} else {
-			/* Force reset of everything */
-			printk("force reset\n");
-			chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
-		}
-	} else {
-		/* Force reset of everything */
-		printk("force reset\n");
-		chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT);
-	}
-}
-
 #endif

arch/arm/mach-clps711x/autcpu12.c

@@ -68,5 +68,6 @@ MACHINE_START(AUTCPU12, "autronix autcpu12")
 	.map_io		= autcpu12_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END
 

arch/arm/mach-clps711x/cdb89712.c

@@ -59,4 +59,5 @@ MACHINE_START(CDB89712, "Cirrus-CDB89712")
 	.map_io		= cdb89712_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END

arch/arm/mach-clps711x/ceiva.c

@@ -60,4 +60,5 @@ MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
 	.map_io		= ceiva_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END

arch/arm/mach-clps711x/clep7312.c

@@ -41,5 +41,6 @@ MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
 	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END
 

arch/arm/mach-clps711x/common.c

@@ -220,3 +220,8 @@ struct sys_timer clps711x_timer = {
 	.init		= clps711x_timer_init,
 	.offset		= clps711x_gettimeoffset,
 };
+
+void clps711x_restart(char mode, const char *cmd)
+{
+	soft_restart(0);
+}

arch/arm/mach-clps711x/common.h

@@ -9,3 +9,4 @@ struct sys_timer;
 extern void clps711x_map_io(void);
 extern void clps711x_init_irq(void);
 extern struct sys_timer clps711x_timer;
+extern void clps711x_restart(char mode, const char *cmd);

arch/arm/mach-clps711x/edb7211-arch.c

@@ -62,4 +62,5 @@ MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
 	.reserve	= edb7211_reserve,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END

arch/arm/mach-clps711x/fortunet.c

@@ -78,4 +78,5 @@ MACHINE_START(FORTUNET, "ARM-FortuNet")
 	.map_io		= clps711x_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END

arch/arm/mach-clps711x/include/mach/system.h

@@ -32,9 +32,4 @@ static inline void arch_idle(void)
 	mov	r0, r0");
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	soft_restart(0);
-}
-
 #endif

arch/arm/mach-clps711x/p720t.c

@@ -93,6 +93,7 @@ MACHINE_START(P720T, "ARM-Prospector720T")
 	.map_io		= p720t_map_io,
 	.init_irq	= clps711x_init_irq,
 	.timer		= &clps711x_timer,
+	.restart	= clps711x_restart,
 MACHINE_END
 
 static int p720t_hw_init(void)

arch/arm/mach-cns3xxx/cns3420vb.c

@@ -204,4 +204,5 @@ MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
 	.timer		= &cns3xxx_timer,
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= cns3420_init,
+	.restart	= cns3xxx_restart,
 MACHINE_END

arch/arm/mach-cns3xxx/core.h

@@ -22,5 +22,6 @@ static inline void cns3xxx_l2x0_init(void) {}
 void __init cns3xxx_map_io(void);
 void __init cns3xxx_init_irq(void);
 void cns3xxx_power_off(void);
+void cns3xxx_restart(char, const char *);
 
 #endif /* __CNS3XXX_CORE_H */

arch/arm/mach-cns3xxx/include/mach/system.h

@@ -11,7 +11,6 @@
 #ifndef __MACH_SYSTEM_H
 #define __MACH_SYSTEM_H
 
-#include <linux/io.h>
 #include <asm/proc-fns.h>
 
 static inline void arch_idle(void)
@@ -23,6 +22,4 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-void arch_reset(char mode, const char *cmd);
-
 #endif

arch/arm/mach-cns3xxx/pm.c

@@ -11,9 +11,9 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 #include <linux/atomic.h>
-#include <mach/system.h>
 #include <mach/cns3xxx.h>
 #include <mach/pm.h>
+#include "core.h"
 
 void cns3xxx_pwr_clk_en(unsigned int block)
 {
@@ -89,7 +89,7 @@ void cns3xxx_pwr_soft_rst(unsigned int block)
 }
 EXPORT_SYMBOL(cns3xxx_pwr_soft_rst);
 
-void arch_reset(char mode, const char *cmd)
+void cns3xxx_restart(char mode, const char *cmd)
 {
 	/*
 	 * To reset, we hit the on-board reset register

arch/arm/mach-davinci/board-da830-evm.c

@@ -682,4 +682,5 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
 	.timer		= &davinci_timer,
 	.init_machine	= da830_evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= da8xx_restart,
 MACHINE_END

arch/arm/mach-davinci/board-da850-evm.c

@@ -1411,4 +1411,5 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
 	.timer		= &davinci_timer,
 	.init_machine	= da850_evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= da8xx_restart,
 MACHINE_END

arch/arm/mach-davinci/board-dm355-evm.c

@@ -357,4 +357,5 @@ MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
 	.timer	      = &davinci_timer,
 	.init_machine = dm355_evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END

arch/arm/mach-davinci/board-dm355-leopard.c

@@ -276,4 +276,5 @@ MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
 	.timer	      = &davinci_timer,
 	.init_machine = dm355_leopard_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END

arch/arm/mach-davinci/board-dm365-evm.c

@@ -618,5 +618,6 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
 	.timer		= &davinci_timer,
 	.init_machine	= dm365_evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END
 

arch/arm/mach-davinci/board-dm644x-evm.c

@@ -719,4 +719,5 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
 	.timer	      = &davinci_timer,
 	.init_machine = davinci_evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -799,6 +799,7 @@ MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
 	.timer        = &davinci_timer,
 	.init_machine = evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END
 
 MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
@@ -808,5 +809,6 @@ MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
 	.timer        = &davinci_timer,
 	.init_machine = evm_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END
 

arch/arm/mach-davinci/board-mityomapl138.c

@@ -573,4 +573,5 @@ MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
 	.timer		= &davinci_timer,
 	.init_machine	= mityomapl138_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= da8xx_restart,
 MACHINE_END

arch/arm/mach-davinci/board-neuros-osd2.c

@@ -278,4 +278,5 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
 	.timer		= &davinci_timer,
 	.init_machine = davinci_ntosd2_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END

arch/arm/mach-davinci/board-omapl138-hawk.c

@@ -344,4 +344,5 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
 	.timer		= &davinci_timer,
 	.init_machine	= omapl138_hawk_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= da8xx_restart,
 MACHINE_END

arch/arm/mach-davinci/board-sffsdr.c

@@ -157,4 +157,5 @@ MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
 	.timer	      = &davinci_timer,
 	.init_machine = davinci_sffsdr_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= davinci_restart,
 MACHINE_END

arch/arm/mach-davinci/board-tnetv107x-evm.c

@@ -283,4 +283,5 @@ MACHINE_START(TNETV107X, "TNETV107X EVM")
 	.timer		= &davinci_timer,
 	.init_machine	= tnetv107x_evm_board_init,
 	.dma_zone_size	= SZ_128M,
+	.restart	= tnetv107x_restart,
 MACHINE_END

arch/arm/mach-davinci/common.c

@@ -97,9 +97,6 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
 	local_flush_tlb_all();
 	flush_cache_all();
 
-	if (!davinci_soc_info.reset)
-		davinci_soc_info.reset = davinci_watchdog_reset;
-
 	/*
 	 * We want to check CPU revision early for cpu_is_xxxx() macros.
 	 * IO space mapping must be initialized before we can do that.

arch/arm/mach-davinci/da830.c

@@ -1201,7 +1201,6 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
 	.gpio_irq		= IRQ_DA8XX_GPIO0,
 	.serial_dev		= &da8xx_serial_device,
 	.emac_pdata		= &da8xx_emac_pdata,
-	.reset_device		= &da8xx_wdt_device,
 };
 
 void __init da830_init(void)

arch/arm/mach-davinci/da850.c

@@ -1121,7 +1121,6 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
 	.emac_pdata		= &da8xx_emac_pdata,
 	.sram_dma		= DA8XX_ARM_RAM_BASE,
 	.sram_len		= SZ_8K,
-	.reset_device		= &da8xx_wdt_device,
 };
 
 void __init da850_init(void)

arch/arm/mach-davinci/devices-da8xx.c

@@ -363,6 +363,11 @@ struct platform_device da8xx_wdt_device = {
 	.resource	= da8xx_watchdog_resources,
 };
 
+void da8xx_restart(char mode, const char *cmd)
+{
+	davinci_watchdog_reset(&da8xx_wdt_device);
+}
+
 int __init da8xx_register_watchdog(void)
 {
 	return platform_device_register(&da8xx_wdt_device);

arch/arm/mach-davinci/devices.c

@@ -291,6 +291,11 @@ struct platform_device davinci_wdt_device = {
 	.resource	= wdt_resources,
 };
 
+void davinci_restart(char mode, const char *cmd)
+{
+	davinci_watchdog_reset(&davinci_wdt_device);
+}
+
 static void davinci_init_wdt(void)
 {
 	platform_device_register(&davinci_wdt_device);

arch/arm/mach-davinci/dm355.c

@@ -853,7 +853,6 @@ static struct davinci_soc_info davinci_soc_info_dm355 = {
 	.serial_dev		= &dm355_serial_device,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
-	.reset_device		= &davinci_wdt_device,
 };
 
 void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)

arch/arm/mach-davinci/dm365.c

@@ -1083,7 +1083,6 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
 	.emac_pdata		= &dm365_emac_pdata,
 	.sram_dma		= 0x00010000,
 	.sram_len		= SZ_32K,
-	.reset_device		= &davinci_wdt_device,
 };
 
 void __init dm365_init_asp(struct snd_platform_data *pdata)

arch/arm/mach-davinci/dm644x.c

@@ -767,7 +767,6 @@ static struct davinci_soc_info davinci_soc_info_dm644x = {
 	.emac_pdata		= &dm644x_emac_pdata,
 	.sram_dma		= 0x00008000,
 	.sram_len		= SZ_16K,
-	.reset_device		= &davinci_wdt_device,
 };
 
 void __init dm644x_init_asp(struct snd_platform_data *pdata)

arch/arm/mach-davinci/dm646x.c

@@ -854,7 +854,6 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.emac_pdata		= &dm646x_emac_pdata,
 	.sram_dma		= 0x10010000,
 	.sram_len		= SZ_32K,
-	.reset_device		= &davinci_wdt_device,
 };
 
 void __init dm646x_init_mcasp0(struct snd_platform_data *pdata)

arch/arm/mach-davinci/include/mach/common.h

@@ -77,14 +77,13 @@ struct davinci_soc_info {
 	struct emac_platform_data	*emac_pdata;
 	dma_addr_t			sram_dma;
 	unsigned			sram_len;
-	struct platform_device		*reset_device;
-	void				(*reset)(struct platform_device *);
 };
 
 extern struct davinci_soc_info davinci_soc_info;
 
 extern void davinci_common_init(struct davinci_soc_info *soc_info);
 extern void davinci_init_ide(void);
+void davinci_restart(char mode, const char *cmd);
 
 /* standard place to map on-chip SRAMs; they *may* support DMA */
 #define SRAM_VIRT	0xfffe0000

arch/arm/mach-davinci/include/mach/da8xx.h

@@ -91,6 +91,7 @@ int da8xx_register_cpuidle(void);
 void __iomem * __init da8xx_get_mem_ctlr(void);
 int da850_register_pm(struct platform_device *pdev);
 int __init da850_register_sata(unsigned long refclkpn);
+void da8xx_restart(char mode, const char *cmd);
 
 extern struct platform_device da8xx_serial_device;
 extern struct emac_platform_data da8xx_emac_pdata;

arch/arm/mach-davinci/include/mach/system.h

@@ -18,10 +18,4 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	if (davinci_soc_info.reset)
-		davinci_soc_info.reset(davinci_soc_info.reset_device);
-}
-
 #endif /* __ASM_ARCH_SYSTEM_H */

arch/arm/mach-davinci/include/mach/tnetv107x.h

@@ -54,6 +54,7 @@ extern struct platform_device tnetv107x_serial_device;
 extern void __init tnetv107x_init(void);
 extern void __init tnetv107x_devices_init(struct tnetv107x_device_info *);
 extern void __init tnetv107x_irq_init(void);
+void tnetv107x_restart(char mode, const char *cmd);
 
 #endif
 

arch/arm/mach-davinci/tnetv107x.c

@@ -730,6 +730,11 @@ static void tnetv107x_watchdog_reset(struct platform_device *pdev)
 	__raw_writel(1, &regs->kick);
 }
 
+void tnetv107x_restart(char mode, const char *cmd)
+{
+	tnetv107x_watchdog_reset(&tnetv107x_wdt_device);
+}
+
 static struct davinci_soc_info tnetv107x_soc_info = {
 	.io_desc		= io_desc,
 	.io_desc_num		= ARRAY_SIZE(io_desc),
@@ -752,8 +757,6 @@ static struct davinci_soc_info tnetv107x_soc_info = {
 	.gpio_num		= TNETV107X_N_GPIO,
 	.timer_info		= &timer_info,
 	.serial_dev		= &tnetv107x_serial_device,
-	.reset			= tnetv107x_watchdog_reset,
-	.reset_device		= &tnetv107x_wdt_device,
 };
 
 void __init tnetv107x_init(void)

arch/arm/mach-dove/cm-a510.c

@@ -93,4 +93,5 @@ MACHINE_START(CM_A510, "Compulab CM-A510 Board")
 	.init_early	= dove_init_early,
 	.init_irq	= dove_init_irq,
 	.timer		= &dove_timer,
+	.restart	= dove_restart,
 MACHINE_END

arch/arm/mach-dove/common.c

@@ -292,3 +292,19 @@ void __init dove_init(void)
 	dove_xor0_init();
 	dove_xor1_init();
 }
+
+void dove_restart(char mode, const char *cmd)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}

arch/arm/mach-dove/common.h

@@ -39,5 +39,6 @@ void dove_spi1_init(void);
 void dove_i2c_init(void);
 void dove_sdio0_init(void);
 void dove_sdio1_init(void);
+void dove_restart(char, const char *);
 
 #endif

arch/arm/mach-dove/dove-db-setup.c

@@ -100,4 +100,5 @@ MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
 	.init_early	= dove_init_early,
 	.init_irq	= dove_init_irq,
 	.timer		= &dove_timer,
+	.restart	= dove_restart,
 MACHINE_END

arch/arm/mach-dove/include/mach/system.h

@@ -9,28 +9,9 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <mach/bridge-regs.h>
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, const char *cmd)
-{
-	/*
-	 * Enable soft reset to assert RSTOUTn.
-	 */
-	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
-
-	/*
-	 * Assert soft reset.
-	 */
-	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
-
-	while (1)
-		;
-}
-
-
 #endif

arch/arm/mach-ebsa110/core.c

@@ -278,6 +278,11 @@ static int __init ebsa110_init(void)
 
 arch_initcall(ebsa110_init);
 
+static void ebsa110_restart(char mode, const char *cmd)
+{
+	soft_restart(0x80000000);
+}
+
 MACHINE_START(EBSA110, "EBSA110")
 	/* Maintainer: Russell King */
 	.atag_offset	= 0x400,
@@ -287,4 +292,5 @@ MACHINE_START(EBSA110, "EBSA110")
 	.map_io		= ebsa110_map_io,
 	.init_irq	= ebsa110_init_irq,
 	.timer		= &ebsa110_timer,
+	.restart	= ebsa110_restart,
 MACHINE_END

arch/arm/mach-ebsa110/include/mach/system.h

@@ -34,6 +34,4 @@ static inline void arch_idle(void)
 	asm volatile ("mcr p15, 0, ip, c15, c1, 2" : : : "cc");
 }
 
-#define arch_reset(mode, cmd)	soft_restart(0x80000000)
-
 #endif

arch/arm/mach-ep93xx/adssphere.c

@@ -40,4 +40,5 @@ MACHINE_START(ADSSPHERE, "ADS Sphere board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= adssphere_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END

arch/arm/mach-ep93xx/core.c

@@ -906,3 +906,15 @@ void __init ep93xx_init_devices(void)
 	platform_device_register(&ep93xx_ohci_device);
 	platform_device_register(&ep93xx_leds);
 }
+
+void ep93xx_restart(char mode, const char *cmd)
+{
+	/*
+	 * Set then clear the SWRST bit to initiate a software reset
+	 */
+	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
+
+	while (1)
+		;
+}

arch/arm/mach-ep93xx/edb93xx.c

@@ -254,6 +254,7 @@ MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -266,6 +267,7 @@ MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -278,6 +280,7 @@ MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -290,6 +293,7 @@ MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -302,6 +306,7 @@ MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -314,6 +319,7 @@ MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -326,6 +332,7 @@ MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -338,5 +345,6 @@ MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= edb93xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif

arch/arm/mach-ep93xx/gesbc9312.c

@@ -40,4 +40,5 @@ MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= gesbc9312_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -66,4 +66,6 @@ void ep93xx_register_ac97(void);
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
 
+void ep93xx_restart(char, const char *);
+
 #endif

arch/arm/mach-ep93xx/include/mach/system.h

 /*
  * arch/arm/mach-ep93xx/include/mach/system.h
  */
-
-#include <mach/hardware.h>
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	/*
-	 * Set then clear the SWRST bit to initiate a software reset
-	 */
-	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_SWRST);
-	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_SWRST);
-
-	while (1)
-		;
-}

arch/arm/mach-ep93xx/micro9.c

@@ -84,6 +84,7 @@ MACHINE_START(MICRO9, "Contec Micro9-High")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -96,6 +97,7 @@ MACHINE_START(MICRO9M, "Contec Micro9-Mid")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -108,6 +110,7 @@ MACHINE_START(MICRO9L, "Contec Micro9-Lite")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif
 
@@ -120,5 +123,6 @@ MACHINE_START(MICRO9S, "Contec Micro9-Slim")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= micro9_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END
 #endif

arch/arm/mach-ep93xx/simone.c

@@ -84,4 +84,5 @@ MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= simone_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END

arch/arm/mach-ep93xx/snappercl15.c

@@ -181,4 +181,5 @@ MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
 	.handle_irq	= vic_handle_irq,
 	.timer 		= &ep93xx_timer,
 	.init_machine	= snappercl15_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END

arch/arm/mach-ep93xx/ts72xx.c

@@ -251,4 +251,5 @@ MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
 	.handle_irq	= vic_handle_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= ts72xx_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END

arch/arm/mach-ep93xx/vision_ep9307.c

@@ -361,4 +361,5 @@ MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
 	.init_machine	= vision_init_machine,
+	.restart	= ep93xx_restart,
 MACHINE_END

arch/arm/mach-exynos/Makefile

@@ -10,15 +10,17 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-# Core support for EXYNOS4 system
+# Core
 
-obj-$(CONFIG_ARCH_EXYNOS4)	+= cpu.o init.o clock.o irq-combiner.o setup-i2c0.o
-obj-$(CONFIG_ARCH_EXYNOS4)	+= irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= common.o clock.o
 obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
 obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
+
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
+obj-$(CONFIG_ARCH_EXYNOS4)	+= dma.o pmu.o
+
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
 
 obj-$(CONFIG_EXYNOS4_MCT)	+= mct.o
@@ -45,6 +47,7 @@ obj-$(CONFIG_EXYNOS4_DEV_PD)		+= dev-pd.o
 obj-$(CONFIG_EXYNOS4_DEV_SYSMMU)	+= dev-sysmmu.o
 obj-$(CONFIG_EXYNOS4_DEV_DWMCI)		+= dev-dwmci.o
 
+obj-$(CONFIG_ARCH_EXYNOS4)		+= setup-i2c0.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMC)	+= setup-fimc.o
 obj-$(CONFIG_EXYNOS4_SETUP_FIMD0)	+= setup-fimd0.o
 obj-$(CONFIG_EXYNOS4_SETUP_I2C1)	+= setup-i2c1.o

arch/arm/mach-exynos/clock-exynos4210.c

@@ -23,7 +23,6 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
 #include <plat/pm.h>
 
 #include <mach/hardware.h>
@@ -31,6 +30,8 @@
 #include <mach/regs-clock.h>
 #include <mach/exynos4-clock.h>
 
+#include "common.h"
+
 static struct sleep_save exynos4210_clock_save[] = {
 	SAVE_ITEM(S5P_CLKSRC_IMAGE),
 	SAVE_ITEM(S5P_CLKSRC_LCD1),

arch/arm/mach-exynos/clock-exynos4212.c

@@ -23,7 +23,6 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
 #include <plat/pm.h>
 
 #include <mach/hardware.h>
@@ -31,6 +30,8 @@
 #include <mach/regs-clock.h>
 #include <mach/exynos4-clock.h>
 
+#include "common.h"
+
 static struct sleep_save exynos4212_clock_save[] = {
 	SAVE_ITEM(S5P_CLKSRC_IMAGE),
 	SAVE_ITEM(S5P_CLKDIV_IMAGE),

arch/arm/mach-exynos/clock.c

@@ -21,7 +21,6 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
-#include <plat/exynos4.h>
 #include <plat/pm.h>
 
 #include <mach/map.h>
@@ -29,6 +28,8 @@
 #include <mach/sysmmu.h>
 #include <mach/exynos4-clock.h>
 
+#include "common.h"
+
 static struct sleep_save exynos4_clock_save[] = {
 	SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
 	SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),

arch/arm/mach-exynos/cpu.c → arch/arm/mach-exynos/common.c

-/* linux/arch/arm/mach-exynos/cpu.c
- *
+/*
  * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
+ * Common Codes for EXYNOS
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
-*/
+ */
 
-#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
 #include <linux/sysdev.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
+#include <linux/gpio.h>
+#include <linux/sched.h>
+#include <linux/serial_core.h>
 
 #include <asm/proc-fns.h>
-#include <asm/exception.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/regs-irq.h>
+#include <mach/regs-pmu.h>
+#include <mach/regs-gpio.h>
 
 #include <plat/cpu.h>
 #include <plat/clock.h>
 #include <plat/devs.h>
-#include <plat/exynos4.h>
-#include <plat/adc-core.h>
+#include <plat/pm.h>
 #include <plat/sdhci.h>
+#include <plat/gpio-cfg.h>
+#include <plat/adc-core.h>
 #include <plat/fb-core.h>
 #include <plat/fimc-core.h>
 #include <plat/iic-core.h>
-#include <plat/reset.h>
 #include <plat/tv-core.h>
+#include <plat/regs-serial.h>
 
-#include <mach/regs-irq.h>
-#include <mach/regs-pmu.h>
+#include "common.h"
+
+unsigned int gic_bank_offset __read_mostly;
 
-extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
-			 unsigned int irq_start);
-extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
+static const char name_exynos4210[] = "EXYNOS4210";
+static const char name_exynos4212[] = "EXYNOS4212";
+static const char name_exynos4412[] = "EXYNOS4412";
+
+static struct cpu_table cpu_ids[] __initdata = {
+	{
+		.idcode		= EXYNOS4210_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
+		.map_io		= exynos4_map_io,
+		.init_clocks	= exynos4_init_clocks,
+		.init_uarts	= exynos4_init_uarts,
+		.init		= exynos_init,
+		.name		= name_exynos4210,
+	}, {
+		.idcode		= EXYNOS4212_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
+		.map_io		= exynos4_map_io,
+		.init_clocks	= exynos4_init_clocks,
+		.init_uarts	= exynos4_init_uarts,
+		.init		= exynos_init,
+		.name		= name_exynos4212,
+	}, {
+		.idcode		= EXYNOS4412_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
+		.map_io		= exynos4_map_io,
+		.init_clocks	= exynos4_init_clocks,
+		.init_uarts	= exynos4_init_uarts,
+		.init		= exynos_init,
+		.name		= name_exynos4412,
+	},
+};
 
 /* Initial IO mappings */
+
 static struct map_desc exynos_iodesc[] __initdata = {
 	{
+		.virtual	= (unsigned long)S5P_VA_CHIPID,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_CHIPID),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_SYS,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSCON),
+		.length		= SZ_64K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_TIMER,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_TIMER),
+		.length		= SZ_16K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_WATCHDOG,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_WATCHDOG),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5P_VA_SROMC,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SROMC),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)S5P_VA_SYSTIMER,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_SYSTIMER),
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_PMU,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_PMU),
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_PMU),
 		.length		= SZ_64K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_COMBINER_BASE,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_COMBINER),
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_COMBINER),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_GIC_CPU,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_GIC_CPU),
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GIC_CPU),
 		.length		= SZ_64K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S5P_VA_GIC_DIST,
-		.pfn		= __phys_to_pfn(EXYNOS_PA_GIC_DIST),
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
 		.length		= SZ_64K,
 		.type		= MT_DEVICE,
 	}, {
 		.virtual	= (unsigned long)S3C_VA_UART,
-		.pfn		= __phys_to_pfn(S3C_PA_UART),
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_UART),
 		.length		= SZ_512K,
 		.type		= MT_DEVICE,
 	},
@@ -143,7 +208,7 @@ static void exynos_idle(void)
 	local_irq_enable();
 }
 
-static void exynos4_sw_reset(void)
+void exynos4_restart(char mode, const char *cmd)
 {
 	__raw_writel(0x1, S5P_SWRESET);
 }
@@ -153,9 +218,22 @@ static void exynos4_sw_reset(void)
  *
  * register the standard cpu IO areas
  */
-void __init exynos4_map_io(void)
+
+void __init exynos_init_io(struct map_desc *mach_desc, int size)
 {
+	/* initialize the io descriptors we need for initialization */
 	iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
+	if (mach_desc)
+		iotable_init(mach_desc, size);
+
+	/* detect cpu id and rev. */
+	s5p_init_cpu(S5P_VA_CHIPID);
+
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
+}
+
+void __init exynos4_map_io(void)
+{
 	iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
 
 	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
@@ -201,14 +279,134 @@ void __init exynos4_init_clocks(int xtal)
 	exynos4_setup_clocks();
 }
 
+#define COMBINER_ENABLE_SET	0x0
+#define COMBINER_ENABLE_CLEAR	0x4
+#define COMBINER_INT_STATUS	0xC
+
+static DEFINE_SPINLOCK(irq_controller_lock);
+
+struct combiner_chip_data {
+	unsigned int irq_offset;
+	unsigned int irq_mask;
+	void __iomem *base;
+};
+
+static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
+
+static inline void __iomem *combiner_base(struct irq_data *data)
+{
+	struct combiner_chip_data *combiner_data =
+		irq_data_get_irq_chip_data(data);
+
+	return combiner_data->base;
+}
+
+static void combiner_mask_irq(struct irq_data *data)
+{
+	u32 mask = 1 << (data->irq % 32);
+
+	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
+}
+
+static void combiner_unmask_irq(struct irq_data *data)
+{
+	u32 mask = 1 << (data->irq % 32);
+
+	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
+}
+
+static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
+{
+	struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
+	struct irq_chip *chip = irq_get_chip(irq);
+	unsigned int cascade_irq, combiner_irq;
+	unsigned long status;
+
+	chained_irq_enter(chip, desc);
+
+	spin_lock(&irq_controller_lock);
+	status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
+	spin_unlock(&irq_controller_lock);
+	status &= chip_data->irq_mask;
+
+	if (status == 0)
+		goto out;
+
+	combiner_irq = __ffs(status);
+
+	cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
+	if (unlikely(cascade_irq >= NR_IRQS))
+		do_bad_IRQ(cascade_irq, desc);
+	else
+		generic_handle_irq(cascade_irq);
+
+ out:
+	chained_irq_exit(chip, desc);
+}
+
+static struct irq_chip combiner_chip = {
+	.name		= "COMBINER",
+	.irq_mask	= combiner_mask_irq,
+	.irq_unmask	= combiner_unmask_irq,
+};
+
+static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
+{
+	if (combiner_nr >= MAX_COMBINER_NR)
+		BUG();
+	if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
+		BUG();
+	irq_set_chained_handler(irq, combiner_handle_cascade_irq);
+}
+
+static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
+			  unsigned int irq_start)
+{
+	unsigned int i;
+
+	if (combiner_nr >= MAX_COMBINER_NR)
+		BUG();
+
+	combiner_data[combiner_nr].base = base;
+	combiner_data[combiner_nr].irq_offset = irq_start;
+	combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
+
+	/* Disable all interrupts */
+
+	__raw_writel(combiner_data[combiner_nr].irq_mask,
+		     base + COMBINER_ENABLE_CLEAR);
+
+	/* Setup the Linux IRQ subsystem */
+
+	for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
+				+ MAX_IRQ_IN_COMBINER; i++) {
+		irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
+		irq_set_chip_data(i, &combiner_data[combiner_nr]);
+		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+	}
+}
+
+static void exynos4_gic_irq_fix_base(struct irq_data *d)
+{
+	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
+
+	gic_data->cpu_base = S5P_VA_GIC_CPU +
+			    (gic_bank_offset * smp_processor_id());
+
+	gic_data->dist_base = S5P_VA_GIC_DIST +
+			    (gic_bank_offset * smp_processor_id());
+}
+
 void __init exynos4_init_irq(void)
 {
 	int irq;
-	unsigned int gic_bank_offset;
 
 	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
 
-	gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset);
+	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+	gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
+	gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
+	gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
 
 	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
 
@@ -217,7 +415,8 @@ void __init exynos4_init_irq(void)
 		combiner_cascade_irq(irq, IRQ_SPI(irq));
 	}
 
-	/* The parameters of s5p_init_irq() are for VIC init.
+	/*
+	 * The parameters of s5p_init_irq() are for VIC init.
 	 * Theses parameters should be NULL and 0 because EXYNOS4
 	 * uses GIC instead of VIC.
 	 */
@@ -271,9 +470,244 @@ int __init exynos_init(void)
 	/* set idle function */
 	pm_idle = exynos_idle;
 
-	/* set sw_reset function */
-	if (soc_is_exynos4210() || soc_is_exynos4212() || soc_is_exynos4412())
-		s5p_reset_hook = exynos4_sw_reset;
-
 	return sysdev_register(&exynos4_sysdev);
 }
+
+static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = {
+	[0] = {
+		.name		= "uclk1",
+		.divisor	= 1,
+		.min_baud	= 0,
+		.max_baud	= 0,
+	},
+};
+
+/* uart registration process */
+
+void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+{
+	struct s3c2410_uartcfg *tcfg = cfg;
+	u32 ucnt;
+
+	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
+		if (!tcfg->clocks) {
+			tcfg->has_fracval = 1;
+			tcfg->clocks = exynos4_serial_clocks;
+			tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
+		}
+		tcfg->flags |= NO_NEED_CHECK_CLKSRC;
+	}
+
+	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+}
+
+static DEFINE_SPINLOCK(eint_lock);
+
+static unsigned int eint0_15_data[16];
+
+static unsigned int exynos4_get_irq_nr(unsigned int number)
+{
+	u32 ret = 0;
+
+	switch (number) {
+	case 0 ... 3:
+		ret = (number + IRQ_EINT0);
+		break;
+	case 4 ... 7:
+		ret = (number + (IRQ_EINT4 - 4));
+		break;
+	case 8 ... 15:
+		ret = (number + (IRQ_EINT8 - 8));
+		break;
+	default:
+		printk(KERN_ERR "number available : %d\n", number);
+	}
+
+	return ret;
+}
+
+static inline void exynos4_irq_eint_mask(struct irq_data *data)
+{
+	u32 mask;
+
+	spin_lock(&eint_lock);
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	mask |= eint_irq_to_bit(data->irq);
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	spin_unlock(&eint_lock);
+}
+
+static void exynos4_irq_eint_unmask(struct irq_data *data)
+{
+	u32 mask;
+
+	spin_lock(&eint_lock);
+	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	mask &= ~(eint_irq_to_bit(data->irq));
+	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+	spin_unlock(&eint_lock);
+}
+
+static inline void exynos4_irq_eint_ack(struct irq_data *data)
+{
+	__raw_writel(eint_irq_to_bit(data->irq),
+		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
+}
+
+static void exynos4_irq_eint_maskack(struct irq_data *data)
+{
+	exynos4_irq_eint_mask(data);
+	exynos4_irq_eint_ack(data);
+}
+
+static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
+{
+	int offs = EINT_OFFSET(data->irq);
+	int shift;
+	u32 ctrl, mask;
+	u32 newvalue = 0;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		newvalue = S5P_IRQ_TYPE_EDGE_RISING;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	shift = (offs & 0x7) * 4;
+	mask = 0x7 << shift;
+
+	spin_lock(&eint_lock);
+	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
+	ctrl &= ~mask;
+	ctrl |= newvalue << shift;
+	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
+	spin_unlock(&eint_lock);
+
+	switch (offs) {
+	case 0 ... 7:
+		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
+		break;
+	case 8 ... 15:
+		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
+		break;
+	case 16 ... 23:
+		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
+		break;
+	case 24 ... 31:
+		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
+		break;
+	default:
+		printk(KERN_ERR "No such irq number %d", offs);
+	}
+
+	return 0;
+}
+
+static struct irq_chip exynos4_irq_eint = {
+	.name		= "exynos4-eint",
+	.irq_mask	= exynos4_irq_eint_mask,
+	.irq_unmask	= exynos4_irq_eint_unmask,
+	.irq_mask_ack	= exynos4_irq_eint_maskack,
+	.irq_ack	= exynos4_irq_eint_ack,
+	.irq_set_type	= exynos4_irq_eint_set_type,
+#ifdef CONFIG_PM
+	.irq_set_wake	= s3c_irqext_wake,
+#endif
+};
+
+/*
+ * exynos4_irq_demux_eint
+ *
+ * This function demuxes the IRQ from from EINTs 16 to 31.
+ * It is designed to be inlined into the specific handler
+ * s5p_irq_demux_eintX_Y.
+ *
+ * Each EINT pend/mask registers handle eight of them.
+ */
+static inline void exynos4_irq_demux_eint(unsigned int start)
+{
+	unsigned int irq;
+
+	u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
+	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+
+	status &= ~mask;
+	status &= 0xff;
+
+	while (status) {
+		irq = fls(status) - 1;
+		generic_handle_irq(irq + start);
+		status &= ~(1 << irq);
+	}
+}
+
+static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_get_chip(irq);
+	chained_irq_enter(chip, desc);
+	exynos4_irq_demux_eint(IRQ_EINT(16));
+	exynos4_irq_demux_eint(IRQ_EINT(24));
+	chained_irq_exit(chip, desc);
+}
+
+static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+{
+	u32 *irq_data = irq_get_handler_data(irq);
+	struct irq_chip *chip = irq_get_chip(irq);
+
+	chained_irq_enter(chip, desc);
+	chip->irq_mask(&desc->irq_data);
+
+	if (chip->irq_ack)
+		chip->irq_ack(&desc->irq_data);
+
+	generic_handle_irq(*irq_data);
+
+	chip->irq_unmask(&desc->irq_data);
+	chained_irq_exit(chip, desc);
+}
+
+int __init exynos4_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = 0 ; irq <= 31 ; irq++) {
+		irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
+					 handle_level_irq);
+		set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
+	}
+
+	irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
+
+	for (irq = 0 ; irq <= 15 ; irq++) {
+		eint0_15_data[irq] = IRQ_EINT(irq);
+
+		irq_set_handler_data(exynos4_get_irq_nr(irq),
+				     &eint0_15_data[irq]);
+		irq_set_chained_handler(exynos4_get_irq_nr(irq),
+					exynos4_irq_eint0_15);
+	}
+
+	return 0;
+}
+arch_initcall(exynos4_init_irq_eint);

arch/arm/plat-samsung/include/plat/exynos4.h → arch/arm/mach-exynos/common.h

-/* linux/arch/arm/plat-samsung/include/plat/exynos4.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
  *
- * Header file for exynos4 cpu support
+ * Common Header for EXYNOS machines
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
-*/
+ */
+
+#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
+#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
+
+void exynos_init_io(struct map_desc *mach_desc, int size);
+void exynos4_init_irq(void);
 
-/* Common init code for EXYNOS4 related SoCs */
+void exynos4_register_clocks(void);
+void exynos4_setup_clocks(void);
 
-extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void exynos4_register_clocks(void);
-extern void exynos4210_register_clocks(void);
-extern void exynos4212_register_clocks(void);
-extern void exynos4_setup_clocks(void);
+void exynos4210_register_clocks(void);
+void exynos4212_register_clocks(void);
+
+void exynos4_restart(char mode, const char *cmd);
+
+extern struct sys_timer exynos4_timer;
 
 #ifdef CONFIG_ARCH_EXYNOS
 extern  int exynos_init(void);
-extern void exynos4_init_irq(void);
 extern void exynos4_map_io(void);
 extern void exynos4_init_clocks(int xtal);
-extern struct sys_timer exynos4_timer;
-
-#define exynos4_init_uarts exynos4_common_init_uarts
+extern void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
 #else
 #define exynos4_init_clocks NULL
@@ -33,3 +37,5 @@ extern struct sys_timer exynos4_timer;
 #define exynos4_map_io NULL
 #define exynos_init NULL
 #endif
+
+#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */

arch/arm/mach-exynos/include/mach/map.h

@@ -149,7 +149,6 @@
 #define S3C_PA_WDT			EXYNOS4_PA_WATCHDOG
 #define S3C_PA_UART			EXYNOS4_PA_UART
 
-#define S5P_PA_CHIPID			EXYNOS4_PA_CHIPID
 #define S5P_PA_EHCI			EXYNOS4_PA_EHCI
 #define S5P_PA_FIMC0			EXYNOS4_PA_FIMC0
 #define S5P_PA_FIMC1			EXYNOS4_PA_FIMC1
@@ -166,26 +165,17 @@
 #define S5P_PA_ONENAND_DMA		EXYNOS4_PA_ONENAND_DMA
 #define S5P_PA_SDO			EXYNOS4_PA_SDO
 #define S5P_PA_SDRAM			EXYNOS4_PA_SDRAM
-#define S5P_PA_SROMC			EXYNOS4_PA_SROMC
-#define S5P_PA_SYSCON			EXYNOS4_PA_SYSCON
-#define S5P_PA_TIMER			EXYNOS4_PA_TIMER
 #define S5P_PA_VP			EXYNOS4_PA_VP
 
 #define SAMSUNG_PA_ADC			EXYNOS4_PA_ADC
 #define SAMSUNG_PA_ADC1			EXYNOS4_PA_ADC1
 #define SAMSUNG_PA_KEYPAD		EXYNOS4_PA_KEYPAD
 
-#define EXYNOS_PA_COMBINER		EXYNOS4_PA_COMBINER
-#define EXYNOS_PA_GIC_CPU		EXYNOS4_PA_GIC_CPU
-#define EXYNOS_PA_GIC_DIST		EXYNOS4_PA_GIC_DIST
-#define EXYNOS_PA_PMU			EXYNOS4_PA_PMU
-#define EXYNOS_PA_SYSTIMER		EXYNOS4_PA_SYSTIMER
-
 /* Compatibility UART */
 
 #define S3C_VA_UARTx(x)			(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
 
-#define S5P_PA_UART(x)			(S3C_PA_UART + ((x) * S3C_UART_OFFSET))
+#define S5P_PA_UART(x)			(EXYNOS4_PA_UART + ((x) * S3C_UART_OFFSET))
 #define S5P_PA_UART0			S5P_PA_UART(0)
 #define S5P_PA_UART1			S5P_PA_UART(1)
 #define S5P_PA_UART2			S5P_PA_UART(2)

arch/arm/mach-exynos/include/mach/system.h

@@ -13,8 +13,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
-#include <plat/system-reset.h>
-
 static void arch_idle(void)
 {
 	/* nothing here yet */

arch/arm/mach-exynos/init.c

-/* linux/arch/arm/mach-exynos4/init.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/regs-serial.h>
-
-static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = {
-	[0] = {
-		.name		= "uclk1",
-		.divisor	= 1,
-		.min_baud	= 0,
-		.max_baud	= 0,
-	},
-};
-
-/* uart registration process */
-void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
-	struct s3c2410_uartcfg *tcfg = cfg;
-	u32 ucnt;
-
-	for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
-		if (!tcfg->clocks) {
-			tcfg->has_fracval = 1;
-			tcfg->clocks = exynos4_serial_clocks;
-			tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
-		}
-		tcfg->flags |= NO_NEED_CHECK_CLKSRC;
-	}
-
-	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
-}

arch/arm/mach-exynos/irq-combiner.c

-/* linux/arch/arm/mach-exynos4/irq-combiner.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Based on arch/arm/common/gic.c
- *
- * IRQ COMBINER support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/io.h>
-
-#include <asm/mach/irq.h>
-
-#define COMBINER_ENABLE_SET	0x0
-#define COMBINER_ENABLE_CLEAR	0x4
-#define COMBINER_INT_STATUS	0xC
-
-static DEFINE_SPINLOCK(irq_controller_lock);
-
-struct combiner_chip_data {
-	unsigned int irq_offset;
-	unsigned int irq_mask;
-	void __iomem *base;
-};
-
-static struct combiner_chip_data combiner_data[MAX_COMBINER_NR];
-
-static inline void __iomem *combiner_base(struct irq_data *data)
-{
-	struct combiner_chip_data *combiner_data =
-		irq_data_get_irq_chip_data(data);
-
-	return combiner_data->base;
-}
-
-static void combiner_mask_irq(struct irq_data *data)
-{
-	u32 mask = 1 << (data->irq % 32);
-
-	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR);
-}
-
-static void combiner_unmask_irq(struct irq_data *data)
-{
-	u32 mask = 1 << (data->irq % 32);
-
-	__raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET);
-}
-
-static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc)
-{
-	struct combiner_chip_data *chip_data = irq_get_handler_data(irq);
-	struct irq_chip *chip = irq_get_chip(irq);
-	unsigned int cascade_irq, combiner_irq;
-	unsigned long status;
-
-	chained_irq_enter(chip, desc);
-
-	spin_lock(&irq_controller_lock);
-	status = __raw_readl(chip_data->base + COMBINER_INT_STATUS);
-	spin_unlock(&irq_controller_lock);
-	status &= chip_data->irq_mask;
-
-	if (status == 0)
-		goto out;
-
-	combiner_irq = __ffs(status);
-
-	cascade_irq = combiner_irq + (chip_data->irq_offset & ~31);
-	if (unlikely(cascade_irq >= NR_IRQS))
-		do_bad_IRQ(cascade_irq, desc);
-	else
-		generic_handle_irq(cascade_irq);
-
- out:
-	chained_irq_exit(chip, desc);
-}
-
-static struct irq_chip combiner_chip = {
-	.name		= "COMBINER",
-	.irq_mask	= combiner_mask_irq,
-	.irq_unmask	= combiner_unmask_irq,
-};
-
-void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
-{
-	if (combiner_nr >= MAX_COMBINER_NR)
-		BUG();
-	if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
-		BUG();
-	irq_set_chained_handler(irq, combiner_handle_cascade_irq);
-}
-
-void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
-			  unsigned int irq_start)
-{
-	unsigned int i;
-
-	if (combiner_nr >= MAX_COMBINER_NR)
-		BUG();
-
-	combiner_data[combiner_nr].base = base;
-	combiner_data[combiner_nr].irq_offset = irq_start;
-	combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3);
-
-	/* Disable all interrupts */
-
-	__raw_writel(combiner_data[combiner_nr].irq_mask,
-		     base + COMBINER_ENABLE_CLEAR);
-
-	/* Setup the Linux IRQ subsystem */
-
-	for (i = irq_start; i < combiner_data[combiner_nr].irq_offset
-				+ MAX_IRQ_IN_COMBINER; i++) {
-		irq_set_chip_and_handler(i, &combiner_chip, handle_level_irq);
-		irq_set_chip_data(i, &combiner_data[combiner_nr]);
-		set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
-	}
-}

arch/arm/mach-exynos/irq-eint.c

-/* linux/arch/arm/mach-exynos4/irq-eint.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * EXYNOS4 - IRQ EINT support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/sysdev.h>
-#include <linux/gpio.h>
-
-#include <plat/pm.h>
-#include <plat/cpu.h>
-#include <plat/gpio-cfg.h>
-
-#include <mach/regs-gpio.h>
-
-#include <asm/mach/irq.h>
-
-static DEFINE_SPINLOCK(eint_lock);
-
-static unsigned int eint0_15_data[16];
-
-static unsigned int exynos4_get_irq_nr(unsigned int number)
-{
-	u32 ret = 0;
-
-	switch (number) {
-	case 0 ... 3:
-		ret = (number + IRQ_EINT0);
-		break;
-	case 4 ... 7:
-		ret = (number + (IRQ_EINT4 - 4));
-		break;
-	case 8 ... 15:
-		ret = (number + (IRQ_EINT8 - 8));
-		break;
-	default:
-		printk(KERN_ERR "number available : %d\n", number);
-	}
-
-	return ret;
-}
-
-static inline void exynos4_irq_eint_mask(struct irq_data *data)
-{
-	u32 mask;
-
-	spin_lock(&eint_lock);
-	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	mask |= eint_irq_to_bit(data->irq);
-	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	spin_unlock(&eint_lock);
-}
-
-static void exynos4_irq_eint_unmask(struct irq_data *data)
-{
-	u32 mask;
-
-	spin_lock(&eint_lock);
-	mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	mask &= ~(eint_irq_to_bit(data->irq));
-	__raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
-	spin_unlock(&eint_lock);
-}
-
-static inline void exynos4_irq_eint_ack(struct irq_data *data)
-{
-	__raw_writel(eint_irq_to_bit(data->irq),
-		     S5P_EINT_PEND(EINT_REG_NR(data->irq)));
-}
-
-static void exynos4_irq_eint_maskack(struct irq_data *data)
-{
-	exynos4_irq_eint_mask(data);
-	exynos4_irq_eint_ack(data);
-}
-
-static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
-	int offs = EINT_OFFSET(data->irq);
-	int shift;
-	u32 ctrl, mask;
-	u32 newvalue = 0;
-
-	switch (type) {
-	case IRQ_TYPE_EDGE_RISING:
-		newvalue = S5P_IRQ_TYPE_EDGE_RISING;
-		break;
-
-	case IRQ_TYPE_EDGE_FALLING:
-		newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
-		break;
-
-	case IRQ_TYPE_EDGE_BOTH:
-		newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
-		break;
-
-	case IRQ_TYPE_LEVEL_LOW:
-		newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
-		break;
-
-	case IRQ_TYPE_LEVEL_HIGH:
-		newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
-		break;
-
-	default:
-		printk(KERN_ERR "No such irq type %d", type);
-		return -EINVAL;
-	}
-
-	shift = (offs & 0x7) * 4;
-	mask = 0x7 << shift;
-
-	spin_lock(&eint_lock);
-	ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
-	ctrl &= ~mask;
-	ctrl |= newvalue << shift;
-	__raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
-	spin_unlock(&eint_lock);
-
-	switch (offs) {
-	case 0 ... 7:
-		s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
-		break;
-	case 8 ... 15:
-		s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
-		break;
-	case 16 ... 23:
-		s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
-		break;
-	case 24 ... 31:
-		s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
-		break;
-	default:
-		printk(KERN_ERR "No such irq number %d", offs);
-	}
-
-	return 0;
-}
-
-static struct irq_chip exynos4_irq_eint = {
-	.name		= "exynos4-eint",
-	.irq_mask	= exynos4_irq_eint_mask,
-	.irq_unmask	= exynos4_irq_eint_unmask,
-	.irq_mask_ack	= exynos4_irq_eint_maskack,
-	.irq_ack	= exynos4_irq_eint_ack,
-	.irq_set_type	= exynos4_irq_eint_set_type,
-#ifdef CONFIG_PM
-	.irq_set_wake	= s3c_irqext_wake,
-#endif
-};
-
-/* exynos4_irq_demux_eint
- *
- * This function demuxes the IRQ from from EINTs 16 to 31.
- * It is designed to be inlined into the specific handler
- * s5p_irq_demux_eintX_Y.
- *
- * Each EINT pend/mask registers handle eight of them.
- */
-static inline void exynos4_irq_demux_eint(unsigned int start)
-{
-	unsigned int irq;
-
-	u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
-	u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
-
-	status &= ~mask;
-	status &= 0xff;
-
-	while (status) {
-		irq = fls(status) - 1;
-		generic_handle_irq(irq + start);
-		status &= ~(1 << irq);
-	}
-}
-
-static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_get_chip(irq);
-	chained_irq_enter(chip, desc);
-	exynos4_irq_demux_eint(IRQ_EINT(16));
-	exynos4_irq_demux_eint(IRQ_EINT(24));
-	chained_irq_exit(chip, desc);
-}
-
-static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
-{
-	u32 *irq_data = irq_get_handler_data(irq);
-	struct irq_chip *chip = irq_get_chip(irq);
-
-	chained_irq_enter(chip, desc);
-	chip->irq_mask(&desc->irq_data);
-
-	if (chip->irq_ack)
-		chip->irq_ack(&desc->irq_data);
-
-	generic_handle_irq(*irq_data);
-
-	chip->irq_unmask(&desc->irq_data);
-	chained_irq_exit(chip, desc);
-}
-
-int __init exynos4_init_irq_eint(void)
-{
-	int irq;
-
-	for (irq = 0 ; irq <= 31 ; irq++) {
-		irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
-					 handle_level_irq);
-		set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
-	}
-
-	irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
-
-	for (irq = 0 ; irq <= 15 ; irq++) {
-		eint0_15_data[irq] = IRQ_EINT(irq);
-
-		irq_set_handler_data(exynos4_get_irq_nr(irq),
-				     &eint0_15_data[irq]);
-		irq_set_chained_handler(exynos4_get_irq_nr(irq),
-					exynos4_irq_eint0_15);
-	}
-
-	return 0;
-}
-
-arch_initcall(exynos4_init_irq_eint);

arch/arm/mach-exynos/mach-armlex4210.c

@@ -21,7 +21,6 @@
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/exynos4.h>
 #include <plat/gpio-cfg.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
@@ -29,6 +28,8 @@
 
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define ARMLEX4210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -188,7 +189,7 @@ static void __init armlex4210_smsc911x_init(void)
 
 static void __init armlex4210_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(armlex4210_uartcfgs,
 			   ARRAY_SIZE(armlex4210_uartcfgs));
@@ -214,4 +215,5 @@ MACHINE_START(ARMLEX4210, "ARMLEX4210")
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= armlex4210_machine_init,
 	.timer		= &exynos4_timer,
+	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-nuri.c

@@ -38,7 +38,6 @@
 #include <plat/adc.h>
 #include <plat/regs-fb-v4.h>
 #include <plat/regs-serial.h>
-#include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
@@ -55,6 +54,8 @@
 
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define NURI_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -1284,7 +1285,7 @@ static struct platform_device *nuri_devices[] __initdata = {
 
 static void __init nuri_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
 }
@@ -1338,4 +1339,5 @@ MACHINE_START(NURI, "NURI")
 	.init_machine	= nuri_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve        = &nuri_reserve,
+	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-origen.c

@@ -29,7 +29,6 @@
 
 #include <plat/regs-serial.h>
 #include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/sdhci.h>
@@ -44,6 +43,8 @@
 
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define ORIGEN_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -639,7 +640,7 @@ static void s5p_tv_setup(void)
 
 static void __init origen_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
 }
@@ -699,4 +700,5 @@ MACHINE_START(ORIGEN, "ORIGEN")
 	.init_machine	= origen_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve	= &origen_reserve,
+	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-smdk4x12.c

@@ -28,7 +28,6 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
-#include <plat/exynos4.h>
 #include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 #include <plat/keypad.h>
@@ -37,6 +36,8 @@
 
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDK4X12_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -250,7 +251,7 @@ static void __init smdk4x12_map_io(void)
 {
 	clk_xusbxti.rate = 24000000;
 
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
 }
@@ -291,6 +292,7 @@ MACHINE_START(SMDK4212, "SMDK4212")
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
+	.restart	= exynos4_restart,
 MACHINE_END
 
 MACHINE_START(SMDK4412, "SMDK4412")
@@ -302,4 +304,5 @@ MACHINE_START(SMDK4412, "SMDK4412")
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdk4x12_machine_init,
 	.timer		= &exynos4_timer,
+	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-smdkv310.c

@@ -28,7 +28,6 @@
 #include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
 #include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/fb.h>
@@ -44,6 +43,8 @@
 
 #include <mach/map.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define SMDKV310_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -333,7 +334,7 @@ static void s5p_tv_setup(void)
 
 static void __init smdkv310_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
 }
@@ -380,6 +381,7 @@ MACHINE_START(SMDKV310, "SMDKV310")
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve	= &smdkv310_reserve,
+	.restart	= exynos4_restart,
 MACHINE_END
 
 MACHINE_START(SMDKC210, "SMDKC210")
@@ -390,4 +392,5 @@ MACHINE_START(SMDKC210, "SMDKC210")
 	.handle_irq	= gic_handle_irq,
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
+	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-universal_c210.c

@@ -28,7 +28,6 @@
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
-#include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/iic.h>
@@ -48,6 +47,8 @@
 #include <media/s5p_fimc.h>
 #include <media/m5mols.h>
 
+#include "common.h"
+
 /* Following are default values for UCON, ULCON and UFCON UART registers */
 #define UNIVERSAL_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
 				 S3C2410_UCON_RXILEVEL |	\
@@ -993,7 +994,7 @@ static struct platform_device *universal_devices[] __initdata = {
 
 static void __init universal_map_io(void)
 {
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(24000000);
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
 }
@@ -1063,4 +1064,5 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
 	.init_machine	= universal_machine_init,
 	.timer		= &exynos4_timer,
 	.reserve        = &universal_reserve,
+	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-footbridge/cats-hw.c

@@ -91,4 +91,5 @@ MACHINE_START(CATS, "Chalice-CATS")
 	.map_io		= footbridge_map_io,
 	.init_irq	= footbridge_init_irq,
 	.timer		= &isa_timer,
+	.restart	= footbridge_restart,
 MACHINE_END

arch/arm/mach-footbridge/common.c

@@ -199,6 +199,33 @@ void __init footbridge_map_io(void)
 		iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc));
 }
 
+void footbridge_restart(char mode, const char *cmd)
+{
+	if (mode == 's') {
+		/* Jump into the ROM */
+		soft_restart(0x41000000);
+	} else {
+		/*
+		 * Force the watchdog to do a CPU reset.
+		 *
+		 * After making sure that the watchdog is disabled
+		 * (so we can change the timer registers) we first
+		 * enable the timer to autoreload itself.  Next, the
+		 * timer interval is set really short and any
+		 * current interrupt request is cleared (so we can
+		 * see an edge transition).  Finally, TIMER4 is
+		 * enabled as the watchdog.
+		 */
+		*CSR_SA110_CNTL &= ~(1 << 13);
+		*CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
+				   TIMER_CNTL_AUTORELOAD |
+				   TIMER_CNTL_DIV16;
+		*CSR_TIMER4_LOAD = 0x2;
+		*CSR_TIMER4_CLR  = 0;
+		*CSR_SA110_CNTL |= (1 << 13);
+	}
+}
+
 #ifdef CONFIG_FOOTBRIDGE_ADDIN
 
 static inline unsigned long fb_bus_sdram_offset(void)

arch/arm/mach-footbridge/common.h

@@ -8,3 +8,4 @@ extern void footbridge_map_io(void);
 extern void footbridge_init_irq(void);
 
 extern void isa_init_irq(unsigned int irq);
+extern void footbridge_restart(char, const char *);

arch/arm/mach-footbridge/ebsa285.c

@@ -21,5 +21,6 @@ MACHINE_START(EBSA285, "EBSA285")
 	.map_io		= footbridge_map_io,
 	.init_irq	= footbridge_init_irq,
 	.timer		= &footbridge_timer,
+	.restart	= footbridge_restart,
 MACHINE_END
 

arch/arm/mach-footbridge/include/mach/system.h

@@ -7,63 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/io.h>
-#include <asm/hardware/dec21285.h>
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
 static inline void arch_idle(void)
 {
 	cpu_do_idle();
 }
-
-static inline void arch_reset(char mode, const char *cmd)
-{
-	if (mode == 's') {
-		/*
-		 * Jump into the ROM
-		 */
-		soft_restart(0x41000000);
-	} else {
-		if (machine_is_netwinder()) {
-			/* open up the SuperIO chip
-			 */
-			outb(0x87, 0x370);
-			outb(0x87, 0x370);
-
-			/* aux function group 1 (logical device 7)
-			 */
-			outb(0x07, 0x370);
-			outb(0x07, 0x371);
-
-			/* set GP16 for WD-TIMER output
-			 */
-			outb(0xe6, 0x370);
-			outb(0x00, 0x371);
-
-			/* set a RED LED and toggle WD_TIMER for rebooting
-			 */
-			outb(0xc4, 0x338);
-		} else {
-			/* 
-			 * Force the watchdog to do a CPU reset.
-			 *
-			 * After making sure that the watchdog is disabled
-			 * (so we can change the timer registers) we first
-			 * enable the timer to autoreload itself.  Next, the
-			 * timer interval is set really short and any
-			 * current interrupt request is cleared (so we can
-			 * see an edge transition).  Finally, TIMER4 is
-			 * enabled as the watchdog.
-			 */
-			*CSR_SA110_CNTL &= ~(1 << 13);
-			*CSR_TIMER4_CNTL = TIMER_CNTL_ENABLE |
-					   TIMER_CNTL_AUTORELOAD |
-					   TIMER_CNTL_DIV16;
-			*CSR_TIMER4_LOAD = 0x2;
-			*CSR_TIMER4_CLR  = 0;
-			*CSR_SA110_CNTL |= (1 << 13);
-		}
-	}
-}

arch/arm/mach-footbridge/netwinder-hw.c

@@ -645,6 +645,32 @@ fixup_netwinder(struct tag *tags, char **cmdline, struct meminfo *mi)
 #endif
 }
 
+static void netwinder_restart(char mode, const char *cmd)
+{
+	if (mode == 's') {
+		/* Jump into the ROM */
+		soft_restart(0x41000000);
+	} else {
+		local_irq_disable();
+		local_fiq_disable();
+
+		/* open up the SuperIO chip */
+		outb(0x87, 0x370);
+		outb(0x87, 0x370);
+
+		/* aux function group 1 (logical device 7) */
+		outb(0x07, 0x370);
+		outb(0x07, 0x371);
+
+		/* set GP16 for WD-TIMER output */
+		outb(0xe6, 0x370);
+		outb(0x00, 0x371);
+
+		/* set a RED LED and toggle WD_TIMER for rebooting */
+		outb(0xc4, 0x338);
+	}
+}
+
 MACHINE_START(NETWINDER, "Rebel-NetWinder")
 	/* Maintainer: Russell King/Rebel.com */
 	.atag_offset	= 0x100,
@@ -656,4 +682,5 @@ MACHINE_START(NETWINDER, "Rebel-NetWinder")
 	.map_io		= footbridge_map_io,
 	.init_irq	= footbridge_init_irq,
 	.timer		= &isa_timer,
+	.restart	= netwinder_restart,
 MACHINE_END

arch/arm/mach-footbridge/personal.c

@@ -19,5 +19,6 @@ MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer")
 	.map_io		= footbridge_map_io,
 	.init_irq	= footbridge_init_irq,
 	.timer		= &footbridge_timer,
+	.restart	= footbridge_restart,
 MACHINE_END