ARM: dts: meson: add the clock inputs for the Meson timer

The Meson Timer IP block has two clock inputs:
- clk81 for using the system clock as timebase
- xtal for a timebase with 1us, 10us, 100us and 1ms resolution

The clocksource driver does not use these yet, but it's still a good
idea to add them as this describes how the hardware actually works
internally.
Signed-off-by: NMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: NKevin Hilman <khilman@baylibre.com>

arch/arm/boot/dts/meson.dtsi

@@ -197,7 +197,7 @@
 				interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
 			};
 
-			timer@9940 {
+			timer_abcde: timer@9940 {
 				compatible = "amlogic,meson6-timer";
 				reg = <0x9940 0x18>;
 				interrupts = <GIC_SPI 10 IRQ_TYPE_EDGE_RISING>,

arch/arm/boot/dts/meson6.dtsi

@@ -88,6 +88,11 @@
 	status = "disabled";
 };
 
+&timer_abcde {
+	clocks = <&xtal>, <&clk81>;
+	clock-names = "xtal", "pclk";
+};
+
 &uart_AO {
 	clocks = <&xtal>, <&clk81>, <&clk81>;
 	clock-names = "xtal", "pclk", "baud";

arch/arm/boot/dts/meson8.dtsi

@@ -387,6 +387,11 @@
 	clocks = <&clkc CLKID_CLK81>;
 };
 
+&timer_abcde {
+	clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk";
+};
+
 &uart_AO {
 	compatible = "amlogic,meson8-uart", "amlogic,meson-uart";
 	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;

arch/arm/boot/dts/meson8b.dtsi

@@ -370,6 +370,11 @@
 	clock-names = "core", "clkin";
 };
 
+&timer_abcde {
+	clocks = <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;
+	clock-names = "xtal", "pclk";
+};
+
 &uart_AO {
 	compatible = "amlogic,meson8b-uart", "amlogic,meson-uart";
 	clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_XTAL>, <&clkc CLKID_CLK81>;