[SCSI] lpfc 8.3.24: Extend BSG infrastructure and add link diagnostics

Extend BSG infrastructure and add link diagnostics:
- Removed unnecessary copies in handling pass-through mbox cmds.
- Add embedded SLI_CONFIG support for BSG.
- Add multibuffer support.
- Implemented the setting up and tearing down Lancer FC device for performing
  internal and external loopback diagnostic tests.
- Implemented the driver support for performing new link diagnostic tests
Signed-off-by: NAlex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <jbottomley@parallels.com>

drivers/scsi/lpfc/lpfc.h

@@ -487,6 +487,42 @@ struct unsol_rcv_ct_ctx {
 				     (1 << LPFC_USER_LINK_SPEED_AUTO))
 #define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8, 10, 16"
 
+enum nemb_type {
+	nemb_mse = 1,
+	nemb_hbd
+};
+
+enum mbox_type {
+	mbox_rd = 1,
+	mbox_wr
+};
+
+enum dma_type {
+	dma_mbox = 1,
+	dma_ebuf
+};
+
+enum sta_type {
+	sta_pre_addr = 1,
+	sta_pos_addr
+};
+
+struct lpfc_mbox_ext_buf_ctx {
+	uint32_t state;
+#define LPFC_BSG_MBOX_IDLE		0
+#define LPFC_BSG_MBOX_HOST              1
+#define LPFC_BSG_MBOX_PORT		2
+#define LPFC_BSG_MBOX_DONE		3
+#define LPFC_BSG_MBOX_ABTS		4
+	enum nemb_type nembType;
+	enum mbox_type mboxType;
+	uint32_t numBuf;
+	uint32_t mbxTag;
+	uint32_t seqNum;
+	struct lpfc_dmabuf *mbx_dmabuf;
+	struct list_head ext_dmabuf_list;
+};
+
 struct lpfc_hba {
 	/* SCSI interface function jump table entries */
 	int (*lpfc_new_scsi_buf)
@@ -590,6 +626,7 @@ struct lpfc_hba {
 
 	MAILBOX_t *mbox;
 	uint32_t *mbox_ext;
+	struct lpfc_mbox_ext_buf_ctx mbox_ext_buf_ctx;
 	uint32_t ha_copy;
 	struct _PCB *pcb;
 	struct _IOCB *IOCBs;
@@ -708,7 +745,6 @@ struct lpfc_hba {
 	uint32_t          *hbq_get;     /* Host mem address of HBQ get ptrs */
 
 	int brd_no;			/* FC board number */
-
 	char SerialNumber[32];		/* adapter Serial Number */
 	char OptionROMVersion[32];	/* adapter BIOS / Fcode version */
 	char ModelDesc[256];		/* Model Description */

drivers/scsi/lpfc/lpfc_bsg.h

@@ -24,15 +24,17 @@
  * These are the vendor unique structures passed in using the bsg
  * FC_BSG_HST_VENDOR message code type.
  */
-#define LPFC_BSG_VENDOR_SET_CT_EVENT	1
-#define LPFC_BSG_VENDOR_GET_CT_EVENT	2
-#define LPFC_BSG_VENDOR_SEND_MGMT_RESP	3
-#define LPFC_BSG_VENDOR_DIAG_MODE	4
-#define LPFC_BSG_VENDOR_DIAG_TEST	5
-#define LPFC_BSG_VENDOR_GET_MGMT_REV	6
-#define LPFC_BSG_VENDOR_MBOX		7
-#define LPFC_BSG_VENDOR_MENLO_CMD	8
-#define LPFC_BSG_VENDOR_MENLO_DATA	9
+#define LPFC_BSG_VENDOR_SET_CT_EVENT		1
+#define LPFC_BSG_VENDOR_GET_CT_EVENT		2
+#define LPFC_BSG_VENDOR_SEND_MGMT_RESP		3
+#define LPFC_BSG_VENDOR_DIAG_MODE		4
+#define LPFC_BSG_VENDOR_DIAG_RUN_LOOPBACK	5
+#define LPFC_BSG_VENDOR_GET_MGMT_REV		6
+#define LPFC_BSG_VENDOR_MBOX			7
+#define LPFC_BSG_VENDOR_MENLO_CMD		8
+#define LPFC_BSG_VENDOR_MENLO_DATA		9
+#define LPFC_BSG_VENDOR_DIAG_MODE_END		10
+#define LPFC_BSG_VENDOR_LINK_DIAG_TEST		11
 
 struct set_ct_event {
 	uint32_t command;
@@ -67,10 +69,25 @@ struct diag_mode_set {
 	uint32_t timeout;
 };
 
+struct sli4_link_diag {
+	uint32_t command;
+	uint32_t timeout;
+	uint32_t test_id;
+	uint32_t loops;
+	uint32_t test_version;
+	uint32_t error_action;
+};
+
 struct diag_mode_test {
 	uint32_t command;
 };
 
+struct diag_status {
+	uint32_t mbox_status;
+	uint32_t shdr_status;
+	uint32_t shdr_add_status;
+};
+
 #define LPFC_WWNN_TYPE		0
 #define LPFC_WWPN_TYPE		1
 
@@ -92,11 +109,15 @@ struct get_mgmt_rev_reply {
 };
 
 #define BSG_MBOX_SIZE 4096 /* mailbox command plus extended data */
+
+/* BSG mailbox request header */
 struct dfc_mbox_req {
 	uint32_t command;
 	uint32_t mbOffset;
 	uint32_t inExtWLen;
 	uint32_t outExtWLen;
+	uint32_t extMboxTag;
+	uint32_t extSeqNum;
 };
 
 /* Used for menlo command or menlo data. The xri is only used for menlo data */
@@ -171,7 +192,7 @@ struct lpfc_sli_config_mse {
 #define lpfc_mbox_sli_config_mse_len_WORD	buf_len
 };
 
-struct lpfc_sli_config_subcmd_hbd {
+struct lpfc_sli_config_hbd {
 	uint32_t buf_len;
 #define lpfc_mbox_sli_config_ecmn_hbd_len_SHIFT	0
 #define lpfc_mbox_sli_config_ecmn_hbd_len_MASK	0xffffff
@@ -194,21 +215,39 @@ struct lpfc_sli_config_hdr {
 	uint32_t reserved5;
 };
 
-struct lpfc_sli_config_generic {
+struct lpfc_sli_config_emb0_subsys {
 	struct lpfc_sli_config_hdr	sli_config_hdr;
 #define LPFC_MBX_SLI_CONFIG_MAX_MSE     19
 	struct lpfc_sli_config_mse	mse[LPFC_MBX_SLI_CONFIG_MAX_MSE];
+	uint32_t padding;
+	uint32_t word64;
+#define lpfc_emb0_subcmnd_opcode_SHIFT	0
+#define lpfc_emb0_subcmnd_opcode_MASK	0xff
+#define lpfc_emb0_subcmnd_opcode_WORD	word64
+#define lpfc_emb0_subcmnd_subsys_SHIFT	8
+#define lpfc_emb0_subcmnd_subsys_MASK	0xff
+#define lpfc_emb0_subcmnd_subsys_WORD	word64
+/* Subsystem FCOE (0x0C) OpCodes */
+#define SLI_CONFIG_SUBSYS_FCOE		0x0C
+#define FCOE_OPCODE_READ_FCF		0x08
+#define FCOE_OPCODE_ADD_FCF		0x09
 };
 
-struct lpfc_sli_config_subcmnd {
+struct lpfc_sli_config_emb1_subsys {
 	struct lpfc_sli_config_hdr	sli_config_hdr;
 	uint32_t word6;
-#define lpfc_subcmnd_opcode_SHIFT	0
-#define lpfc_subcmnd_opcode_MASK	0xff
-#define lpfc_subcmnd_opcode_WORD	word6
-#define lpfc_subcmnd_subsys_SHIFT	8
-#define lpfc_subcmnd_subsys_MASK	0xff
-#define lpfc_subcmnd_subsys_WORD	word6
+#define lpfc_emb1_subcmnd_opcode_SHIFT	0
+#define lpfc_emb1_subcmnd_opcode_MASK	0xff
+#define lpfc_emb1_subcmnd_opcode_WORD	word6
+#define lpfc_emb1_subcmnd_subsys_SHIFT	8
+#define lpfc_emb1_subcmnd_subsys_MASK	0xff
+#define lpfc_emb1_subcmnd_subsys_WORD	word6
+/* Subsystem COMN (0x01) OpCodes */
+#define SLI_CONFIG_SUBSYS_COMN		0x01
+#define COMN_OPCODE_READ_OBJECT		0xAB
+#define COMN_OPCODE_WRITE_OBJECT	0xAC
+#define COMN_OPCODE_READ_OBJECT_LIST	0xAD
+#define COMN_OPCODE_DELETE_OBJECT	0xAE
 	uint32_t timeout;
 	uint32_t request_length;
 	uint32_t word9;
@@ -222,8 +261,8 @@ struct lpfc_sli_config_subcmnd {
 	uint32_t rd_offset;
 	uint32_t obj_name[26];
 	uint32_t hbd_count;
-#define LPFC_MBX_SLI_CONFIG_MAX_HBD	10
-	struct lpfc_sli_config_subcmd_hbd   hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD];
+#define LPFC_MBX_SLI_CONFIG_MAX_HBD	8
+	struct lpfc_sli_config_hbd	hbd[LPFC_MBX_SLI_CONFIG_MAX_HBD];
 };
 
 struct lpfc_sli_config_mbox {
@@ -235,7 +274,11 @@ struct lpfc_sli_config_mbox {
 #define lpfc_mqe_command_MASK		0x000000FF
 #define lpfc_mqe_command_WORD		word0
 	union {
-		struct lpfc_sli_config_generic	sli_config_generic;
-		struct lpfc_sli_config_subcmnd	sli_config_subcmnd;
+		struct lpfc_sli_config_emb0_subsys sli_config_emb0_subsys;
+		struct lpfc_sli_config_emb1_subsys sli_config_emb1_subsys;
 	} un;
 };
+
+/* driver only */
+#define SLI_CONFIG_NOT_HANDLED		0
+#define SLI_CONFIG_HANDLED		1

drivers/scsi/lpfc/lpfc_hw4.h

@@ -867,6 +867,8 @@ struct mbox_header {
 #define LPFC_MBOX_OPCODE_FCOE_DELETE_FCF		0x0A
 #define LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE		0x0B
 #define LPFC_MBOX_OPCODE_FCOE_REDISCOVER_FCF		0x10
+#define LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_STATE		0x22
+#define LPFC_MBOX_OPCODE_FCOE_LINK_DIAG_LOOPBACK	0x23
 
 /* Mailbox command structures */
 struct eq_context {
@@ -1308,6 +1310,83 @@ struct lpfc_id_range {
 #define lpfc_mbx_rsrc_id_word4_1_WORD	word5
 };
 
+struct lpfc_mbx_set_link_diag_state {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_set_diag_state_diag_SHIFT	0
+#define lpfc_mbx_set_diag_state_diag_MASK	0x00000001
+#define lpfc_mbx_set_diag_state_diag_WORD	word0
+#define lpfc_mbx_set_diag_state_link_num_SHIFT	16
+#define lpfc_mbx_set_diag_state_link_num_MASK	0x0000003F
+#define lpfc_mbx_set_diag_state_link_num_WORD	word0
+#define lpfc_mbx_set_diag_state_link_type_SHIFT 22
+#define lpfc_mbx_set_diag_state_link_type_MASK	0x00000003
+#define lpfc_mbx_set_diag_state_link_type_WORD	word0
+		} req;
+		struct {
+			uint32_t word0;
+		} rsp;
+	} u;
+};
+
+struct lpfc_mbx_set_link_diag_loopback {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_set_diag_lpbk_type_SHIFT	0
+#define lpfc_mbx_set_diag_lpbk_type_MASK	0x00000001
+#define lpfc_mbx_set_diag_lpbk_type_WORD	word0
+#define LPFC_DIAG_LOOPBACK_TYPE_DISABLE		0x0
+#define LPFC_DIAG_LOOPBACK_TYPE_INTERNAL	0x1
+#define LPFC_DIAG_LOOPBACK_TYPE_EXTERNAL	0x2
+#define lpfc_mbx_set_diag_lpbk_link_num_SHIFT	16
+#define lpfc_mbx_set_diag_lpbk_link_num_MASK	0x0000003F
+#define lpfc_mbx_set_diag_lpbk_link_num_WORD	word0
+#define lpfc_mbx_set_diag_lpbk_link_type_SHIFT	22
+#define lpfc_mbx_set_diag_lpbk_link_type_MASK	0x00000003
+#define lpfc_mbx_set_diag_lpbk_link_type_WORD	word0
+		} req;
+		struct {
+			uint32_t word0;
+		} rsp;
+	} u;
+};
+
+struct lpfc_mbx_run_link_diag_test {
+	struct mbox_header header;
+	union {
+		struct {
+			uint32_t word0;
+#define lpfc_mbx_run_diag_test_link_num_SHIFT	16
+#define lpfc_mbx_run_diag_test_link_num_MASK	0x0000003F
+#define lpfc_mbx_run_diag_test_link_num_WORD	word0
+#define lpfc_mbx_run_diag_test_link_type_SHIFT	22
+#define lpfc_mbx_run_diag_test_link_type_MASK	0x00000003
+#define lpfc_mbx_run_diag_test_link_type_WORD	word0
+			uint32_t word1;
+#define lpfc_mbx_run_diag_test_test_id_SHIFT	0
+#define lpfc_mbx_run_diag_test_test_id_MASK	0x0000FFFF
+#define lpfc_mbx_run_diag_test_test_id_WORD	word1
+#define lpfc_mbx_run_diag_test_loops_SHIFT	16
+#define lpfc_mbx_run_diag_test_loops_MASK	0x0000FFFF
+#define lpfc_mbx_run_diag_test_loops_WORD	word1
+			uint32_t word2;
+#define lpfc_mbx_run_diag_test_test_ver_SHIFT	0
+#define lpfc_mbx_run_diag_test_test_ver_MASK	0x0000FFFF
+#define lpfc_mbx_run_diag_test_test_ver_WORD	word2
+#define lpfc_mbx_run_diag_test_err_act_SHIFT	16
+#define lpfc_mbx_run_diag_test_err_act_MASK	0x000000FF
+#define lpfc_mbx_run_diag_test_err_act_WORD	word2
+		} req;
+		struct {
+			uint32_t word0;
+		} rsp;
+	} u;
+};
+
 /*
  * struct lpfc_mbx_alloc_rsrc_extents:
  * A mbox is generically 256 bytes long. An SLI4_CONFIG mailbox requires
@@ -2553,6 +2632,9 @@ struct lpfc_mqe {
 		struct lpfc_mbx_supp_pages supp_pages;
 		struct lpfc_mbx_pc_sli4_params sli4_params;
 		struct lpfc_mbx_get_sli4_parameters get_sli4_parameters;
+		struct lpfc_mbx_set_link_diag_state link_diag_state;
+		struct lpfc_mbx_set_link_diag_loopback link_diag_loopback;
+		struct lpfc_mbx_run_link_diag_test link_diag_test;
 		struct lpfc_mbx_get_func_cfg get_func_cfg;
 		struct lpfc_mbx_get_prof_cfg get_prof_cfg;
 		struct lpfc_mbx_nop nop;

drivers/scsi/lpfc/lpfc_init.c

@@ -4246,6 +4246,14 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 	phba->fcf.redisc_wait.function = lpfc_sli4_fcf_redisc_wait_tmo;
 	phba->fcf.redisc_wait.data = (unsigned long)phba;
 
+	/*
+	 * Control structure for handling external multi-buffer mailbox
+	 * command pass-through.
+	 */
+	memset((uint8_t *)&phba->mbox_ext_buf_ctx, 0,
+		sizeof(struct lpfc_mbox_ext_buf_ctx));
+	INIT_LIST_HEAD(&phba->mbox_ext_buf_ctx.ext_dmabuf_list);
+
 	/*
 	 * We need to do a READ_CONFIG mailbox command here before
 	 * calling lpfc_get_cfgparam. For VFs this will report the