提交 7a5ca19f 编写于 作者: M Maarten Lankhorst

drm/i915: Convert intel_hdmi connector properties to atomic

intel_hdmi supports 3 properties, force_audio, broadcast rgb and
scaling mode. The last one is only created for eDP, so the is_eDP
in set_property is not required.

panel fitting and broadcast rgb are straightforward and only requires
changing compute_config.

force_audio is also used to force DVI mode, which means changes to
compute_config and mode_valid. mode_valid is called with
connection_mutex held, so it can safely dereference connector->state.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-11-maarten.lankhorst@linux.intel.com
上级 8f647a01
......@@ -904,11 +904,8 @@ struct intel_hdmi {
enum drm_dp_dual_mode_type type;
int max_tmds_clock;
} dp_dual_mode;
bool limited_color_range;
bool color_range_auto;
bool has_hdmi_sink;
bool has_audio;
enum hdmi_force_audio force_audio;
bool rgb_quant_range_selectable;
struct intel_connector *attached_connector;
void (*write_infoframe)(struct drm_encoder *encoder,
......
......@@ -1218,7 +1218,8 @@ static int intel_hdmi_source_max_tmds_clock(struct drm_i915_private *dev_priv)
}
static int hdmi_port_clock_limit(struct intel_hdmi *hdmi,
bool respect_downstream_limits)
bool respect_downstream_limits,
bool force_dvi)
{
struct drm_device *dev = intel_hdmi_to_dev(hdmi);
int max_tmds_clock = intel_hdmi_source_max_tmds_clock(to_i915(dev));
......@@ -1234,7 +1235,7 @@ static int hdmi_port_clock_limit(struct intel_hdmi *hdmi,
if (info->max_tmds_clock)
max_tmds_clock = min(max_tmds_clock,
info->max_tmds_clock);
else if (!hdmi->has_hdmi_sink)
else if (!hdmi->has_hdmi_sink || force_dvi)
max_tmds_clock = min(max_tmds_clock, 165000);
}
......@@ -1243,13 +1244,14 @@ static int hdmi_port_clock_limit(struct intel_hdmi *hdmi,
static enum drm_mode_status
hdmi_port_clock_valid(struct intel_hdmi *hdmi,
int clock, bool respect_downstream_limits)
int clock, bool respect_downstream_limits,
bool force_dvi)
{
struct drm_i915_private *dev_priv = to_i915(intel_hdmi_to_dev(hdmi));
if (clock < 25000)
return MODE_CLOCK_LOW;
if (clock > hdmi_port_clock_limit(hdmi, respect_downstream_limits))
if (clock > hdmi_port_clock_limit(hdmi, respect_downstream_limits, force_dvi))
return MODE_CLOCK_HIGH;
/* BXT DPLL can't generate 223-240 MHz */
......@@ -1273,6 +1275,8 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
enum drm_mode_status status;
int clock;
int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
bool force_dvi =
READ_ONCE(to_intel_digital_connector_state(connector->state)->force_audio) == HDMI_AUDIO_OFF_DVI;
if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
return MODE_NO_DBLESCAN;
......@@ -1289,11 +1293,11 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
clock *= 2;
/* check if we can do 8bpc */
status = hdmi_port_clock_valid(hdmi, clock, true);
status = hdmi_port_clock_valid(hdmi, clock, true, force_dvi);
/* if we can't do 8bpc we may still be able to do 12bpc */
if (!HAS_GMCH_DISPLAY(dev_priv) && status != MODE_OK)
status = hdmi_port_clock_valid(hdmi, clock * 3 / 2, true);
if (!HAS_GMCH_DISPLAY(dev_priv) && status != MODE_OK && hdmi->has_hdmi_sink && !force_dvi)
status = hdmi_port_clock_valid(hdmi, clock * 3 / 2, true, force_dvi);
return status;
}
......@@ -1343,16 +1347,19 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
struct drm_scdc *scdc = &conn_state->connector->display_info.hdmi.scdc;
struct intel_digital_connector_state *intel_conn_state =
to_intel_digital_connector_state(conn_state);
int clock_8bpc = pipe_config->base.adjusted_mode.crtc_clock;
int clock_12bpc = clock_8bpc * 3 / 2;
int desired_bpp;
bool force_dvi = intel_conn_state->force_audio == HDMI_AUDIO_OFF_DVI;
pipe_config->has_hdmi_sink = intel_hdmi->has_hdmi_sink;
pipe_config->has_hdmi_sink = !force_dvi && intel_hdmi->has_hdmi_sink;
if (pipe_config->has_hdmi_sink)
pipe_config->has_infoframe = true;
if (intel_hdmi->color_range_auto) {
if (intel_conn_state->broadcast_rgb == INTEL_BROADCAST_RGB_AUTO) {
/* See CEA-861-E - 5.1 Default Encoding Parameters */
pipe_config->limited_color_range =
pipe_config->has_hdmi_sink &&
......@@ -1360,7 +1367,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
HDMI_QUANTIZATION_RANGE_LIMITED;
} else {
pipe_config->limited_color_range =
intel_hdmi->limited_color_range;
intel_conn_state->broadcast_rgb == INTEL_BROADCAST_RGB_LIMITED;
}
if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK) {
......@@ -1372,8 +1379,13 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
if (HAS_PCH_SPLIT(dev_priv) && !HAS_DDI(dev_priv))
pipe_config->has_pch_encoder = true;
if (pipe_config->has_hdmi_sink && intel_hdmi->has_audio)
pipe_config->has_audio = true;
if (pipe_config->has_hdmi_sink) {
if (intel_conn_state->force_audio == HDMI_AUDIO_AUTO)
pipe_config->has_audio = intel_hdmi->has_audio;
else
pipe_config->has_audio =
intel_conn_state->force_audio == HDMI_AUDIO_ON;
}
/*
* HDMI is either 12 or 8, so if the display lets 10bpc sneak
......@@ -1381,8 +1393,8 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
* outputs. We also need to check that the higher clock still fits
* within limits.
*/
if (pipe_config->pipe_bpp > 8*3 && pipe_config->has_hdmi_sink &&
hdmi_port_clock_valid(intel_hdmi, clock_12bpc, true) == MODE_OK &&
if (pipe_config->pipe_bpp > 8*3 && pipe_config->has_hdmi_sink && !force_dvi &&
hdmi_port_clock_valid(intel_hdmi, clock_12bpc, true, force_dvi) == MODE_OK &&
hdmi_12bpc_possible(pipe_config)) {
DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n");
desired_bpp = 12*3;
......@@ -1402,7 +1414,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder,
}
if (hdmi_port_clock_valid(intel_hdmi, pipe_config->port_clock,
false) != MODE_OK) {
false, force_dvi) != MODE_OK) {
DRM_DEBUG_KMS("unsupported HDMI clock, rejecting mode\n");
return false;
}
......@@ -1509,13 +1521,7 @@ intel_hdmi_set_edid(struct drm_connector *connector)
drm_rgb_quant_range_selectable(edid);
intel_hdmi->has_audio = drm_detect_monitor_audio(edid);
if (intel_hdmi->force_audio != HDMI_AUDIO_AUTO)
intel_hdmi->has_audio =
intel_hdmi->force_audio == HDMI_AUDIO_ON;
if (intel_hdmi->force_audio != HDMI_AUDIO_OFF_DVI)
intel_hdmi->has_hdmi_sink =
drm_detect_hdmi_monitor(edid);
intel_hdmi->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
connected = true;
}
......@@ -1577,96 +1583,6 @@ static int intel_hdmi_get_modes(struct drm_connector *connector)
return intel_connector_update_modes(connector, edid);
}
static bool
intel_hdmi_detect_audio(struct drm_connector *connector)
{
bool has_audio = false;
struct edid *edid;
edid = to_intel_connector(connector)->detect_edid;
if (edid && edid->input & DRM_EDID_INPUT_DIGITAL)
has_audio = drm_detect_monitor_audio(edid);
return has_audio;
}
static int
intel_hdmi_set_property(struct drm_connector *connector,
struct drm_property *property,
uint64_t val)
{
struct intel_hdmi *intel_hdmi = intel_attached_hdmi(connector);
struct intel_digital_port *intel_dig_port =
hdmi_to_dig_port(intel_hdmi);
struct drm_i915_private *dev_priv = to_i915(connector->dev);
int ret;
ret = drm_object_property_set_value(&connector->base, property, val);
if (ret)
return ret;
if (property == dev_priv->force_audio_property) {
enum hdmi_force_audio i = val;
bool has_audio;
if (i == intel_hdmi->force_audio)
return 0;
intel_hdmi->force_audio = i;
if (i == HDMI_AUDIO_AUTO)
has_audio = intel_hdmi_detect_audio(connector);
else
has_audio = (i == HDMI_AUDIO_ON);
if (i == HDMI_AUDIO_OFF_DVI)
intel_hdmi->has_hdmi_sink = 0;
intel_hdmi->has_audio = has_audio;
goto done;
}
if (property == dev_priv->broadcast_rgb_property) {
bool old_auto = intel_hdmi->color_range_auto;
bool old_range = intel_hdmi->limited_color_range;
switch (val) {
case INTEL_BROADCAST_RGB_AUTO:
intel_hdmi->color_range_auto = true;
break;
case INTEL_BROADCAST_RGB_FULL:
intel_hdmi->color_range_auto = false;
intel_hdmi->limited_color_range = false;
break;
case INTEL_BROADCAST_RGB_LIMITED:
intel_hdmi->color_range_auto = false;
intel_hdmi->limited_color_range = true;
break;
default:
return -EINVAL;
}
if (old_auto == intel_hdmi->color_range_auto &&
old_range == intel_hdmi->limited_color_range)
return 0;
goto done;
}
if (property == connector->dev->mode_config.aspect_ratio_property) {
connector->state->picture_aspect_ratio = val;
goto done;
}
return -EINVAL;
done:
if (intel_dig_port->base.base.crtc)
intel_crtc_restore_mode(intel_dig_port->base.base.crtc);
return 0;
}
static void intel_hdmi_pre_enable(struct intel_encoder *encoder,
struct intel_crtc_state *pipe_config,
struct drm_connector_state *conn_state)
......@@ -1791,18 +1707,20 @@ static const struct drm_connector_funcs intel_hdmi_connector_funcs = {
.detect = intel_hdmi_detect,
.force = intel_hdmi_force,
.fill_modes = drm_helper_probe_single_connector_modes,
.set_property = intel_hdmi_set_property,
.atomic_get_property = intel_connector_atomic_get_property,
.set_property = drm_atomic_helper_connector_set_property,
.atomic_get_property = intel_digital_connector_atomic_get_property,
.atomic_set_property = intel_digital_connector_atomic_set_property,
.late_register = intel_connector_register,
.early_unregister = intel_connector_unregister,
.destroy = intel_hdmi_destroy,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_duplicate_state = intel_digital_connector_duplicate_state,
};
static const struct drm_connector_helper_funcs intel_hdmi_connector_helper_funcs = {
.get_modes = intel_hdmi_get_modes,
.mode_valid = intel_hdmi_mode_valid,
.atomic_check = intel_digital_connector_atomic_check,
};
static const struct drm_encoder_funcs intel_hdmi_enc_funcs = {
......@@ -1814,7 +1732,6 @@ intel_hdmi_add_properties(struct intel_hdmi *intel_hdmi, struct drm_connector *c
{
intel_attach_force_audio_property(connector);
intel_attach_broadcast_rgb_property(connector);
intel_hdmi->color_range_auto = true;
intel_attach_aspect_ratio_property(connector);
connector->state->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册