提交 7a2b94bc 编写于 作者: R Russell King 提交者: Russell King

[ARM] pxa: remove MMC register defines from pxa-regs.h

pxamci.h redefines the MMC registers differently so they can be used
with ioremap.  Remove the incompatible definitions from pxa-regs.h.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
上级 f4b6a0a4
#undef MMC_STRPCL
#undef MMC_STAT
#undef MMC_CLKRT
#undef MMC_SPI
#undef MMC_CMDAT
#undef MMC_RESTO
#undef MMC_RDTO
#undef MMC_BLKLEN
#undef MMC_NOB
#undef MMC_PRTBUF
#undef MMC_I_MASK
#undef END_CMD_RES
#undef PRG_DONE
#undef DATA_TRAN_DONE
#undef MMC_I_REG
#undef MMC_CMD
#undef MMC_ARGH
#undef MMC_ARGL
#undef MMC_RES
#undef MMC_RXFIFO
#undef MMC_TXFIFO
#define MMC_STRPCL 0x0000
#define STOP_CLOCK (1 << 0)
#define START_CLOCK (2 << 0)
......
......@@ -1765,29 +1765,9 @@
#define SSACD_P(x) (*(((x) == 1) ? &SSACD_P1 : ((x) == 2) ? &SSACD_P2 : ((x) == 3) ? &SSACD_P3 : NULL))
/*
* MultiMediaCard (MMC) controller
* MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
*/
#define MMC_STRPCL __REG(0x41100000) /* Control to start and stop MMC clock */
#define MMC_STAT __REG(0x41100004) /* MMC Status Register (read only) */
#define MMC_CLKRT __REG(0x41100008) /* MMC clock rate */
#define MMC_SPI __REG(0x4110000c) /* SPI mode control bits */
#define MMC_CMDAT __REG(0x41100010) /* Command/response/data sequence control */
#define MMC_RESTO __REG(0x41100014) /* Expected response time out */
#define MMC_RDTO __REG(0x41100018) /* Expected data read time out */
#define MMC_BLKLEN __REG(0x4110001c) /* Block length of data transaction */
#define MMC_NOB __REG(0x41100020) /* Number of blocks, for block mode */
#define MMC_PRTBUF __REG(0x41100024) /* Partial MMC_TXFIFO FIFO written */
#define MMC_I_MASK __REG(0x41100028) /* Interrupt Mask */
#define MMC_I_REG __REG(0x4110002c) /* Interrupt Register (read only) */
#define MMC_CMD __REG(0x41100030) /* Index of current command */
#define MMC_ARGH __REG(0x41100034) /* MSW part of the current command argument */
#define MMC_ARGL __REG(0x41100038) /* LSW part of the current command argument */
#define MMC_RES __REG(0x4110003c) /* Response FIFO (read only) */
#define MMC_RXFIFO __REG(0x41100040) /* Receive FIFO (read only) */
#define MMC_TXFIFO __REG(0x41100044) /* Transmit FIFO (write only) */
/*
* Core Clock
*/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册