提交 79bd3712 编写于 作者: F Filipe Manana 提交者: David Sterba

btrfs: rework chunk allocation to avoid exhaustion of the system chunk array

Commit eafa4fd0 ("btrfs: fix exhaustion of the system chunk array
due to concurrent allocations") fixed a problem that resulted in
exhausting the system chunk array in the superblock when there are many
tasks allocating chunks in parallel. Basically too many tasks enter the
first phase of chunk allocation without previous tasks having finished
their second phase of allocation, resulting in too many system chunks
being allocated. That was originally observed when running the fallocate
tests of stress-ng on a PowerPC machine, using a node size of 64K.

However that commit also introduced a deadlock where a task in phase 1 of
the chunk allocation waited for another task that had allocated a system
chunk to finish its phase 2, but that other task was waiting on an extent
buffer lock held by the first task, therefore resulting in both tasks not
making any progress. That change was later reverted by a patch with the
subject "btrfs: fix deadlock with concurrent chunk allocations involving
system chunks", since there is no simple and short solution to address it
and the deadlock is relatively easy to trigger on zoned filesystems, while
the system chunk array exhaustion is not so common.

This change reworks the chunk allocation to avoid the system chunk array
exhaustion. It accomplishes that by making the first phase of chunk
allocation do the updates of the device items in the chunk btree and the
insertion of the new chunk item in the chunk btree. This is done while
under the protection of the chunk mutex (fs_info->chunk_mutex), in the
same critical section that checks for available system space, allocates
a new system chunk if needed and reserves system chunk space. This way
we do not have chunk space reserved until the second phase completes.

The same logic is applied to chunk removal as well, since it keeps
reserved system space long after it is done updating the chunk btree.

For direct allocation of system chunks, the previous behaviour remains,
because otherwise we would deadlock on extent buffers of the chunk btree.
Changes to the chunk btree are by large done by chunk allocation and chunk
removal, which first reserve chunk system space and then later do changes
to the chunk btree. The other remaining cases are uncommon and correspond
to adding a device, removing a device and resizing a device. All these
other cases do not pre-reserve system space, they modify the chunk btree
right away, so they don't hold reserved space for a long period like chunk
allocation and chunk removal do.

The diff of this change is huge, but more than half of it is just addition
of comments describing both how things work regarding chunk allocation and
removal, including both the new behavior and the parts of the old behavior
that did not change.

CC: stable@vger.kernel.org # 5.12+
Tested-by: NShin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: NNaohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Tested-by: NDavid Sterba <dsterba@suse.com>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
上级 1cb3db1c
......@@ -2207,6 +2207,13 @@ int btrfs_read_block_groups(struct btrfs_fs_info *info)
return ret;
}
/*
* This function, insert_block_group_item(), belongs to the phase 2 of chunk
* allocation.
*
* See the comment at btrfs_chunk_alloc() for details about the chunk allocation
* phases.
*/
static int insert_block_group_item(struct btrfs_trans_handle *trans,
struct btrfs_block_group *block_group)
{
......@@ -2229,15 +2236,19 @@ static int insert_block_group_item(struct btrfs_trans_handle *trans,
return btrfs_insert_item(trans, root, &key, &bgi, sizeof(bgi));
}
/*
* This function, btrfs_create_pending_block_groups(), belongs to the phase 2 of
* chunk allocation.
*
* See the comment at btrfs_chunk_alloc() for details about the chunk allocation
* phases.
*/
void btrfs_create_pending_block_groups(struct btrfs_trans_handle *trans)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
struct btrfs_block_group *block_group;
int ret = 0;
if (!trans->can_flush_pending_bgs)
return;
while (!list_empty(&trans->new_bgs)) {
int index;
......@@ -2252,6 +2263,13 @@ void btrfs_create_pending_block_groups(struct btrfs_trans_handle *trans)
ret = insert_block_group_item(trans, block_group);
if (ret)
btrfs_abort_transaction(trans, ret);
if (!block_group->chunk_item_inserted) {
mutex_lock(&fs_info->chunk_mutex);
ret = btrfs_chunk_alloc_add_chunk_item(trans, block_group);
mutex_unlock(&fs_info->chunk_mutex);
if (ret)
btrfs_abort_transaction(trans, ret);
}
ret = btrfs_finish_chunk_alloc(trans, block_group->start,
block_group->length);
if (ret)
......@@ -2275,8 +2293,9 @@ void btrfs_create_pending_block_groups(struct btrfs_trans_handle *trans)
btrfs_trans_release_chunk_metadata(trans);
}
int btrfs_make_block_group(struct btrfs_trans_handle *trans, u64 bytes_used,
u64 type, u64 chunk_offset, u64 size)
struct btrfs_block_group *btrfs_make_block_group(struct btrfs_trans_handle *trans,
u64 bytes_used, u64 type,
u64 chunk_offset, u64 size)
{
struct btrfs_fs_info *fs_info = trans->fs_info;
struct btrfs_block_group *cache;
......@@ -2286,7 +2305,7 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans, u64 bytes_used,
cache = btrfs_create_block_group_cache(fs_info, chunk_offset);
if (!cache)
return -ENOMEM;
return ERR_PTR(-ENOMEM);
cache->length = size;
set_free_space_tree_thresholds(cache);
......@@ -2300,7 +2319,7 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans, u64 bytes_used,
ret = btrfs_load_block_group_zone_info(cache, true);
if (ret) {
btrfs_put_block_group(cache);
return ret;
return ERR_PTR(ret);
}
ret = exclude_super_stripes(cache);
......@@ -2308,7 +2327,7 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans, u64 bytes_used,
/* We may have excluded something, so call this just in case */
btrfs_free_excluded_extents(cache);
btrfs_put_block_group(cache);
return ret;
return ERR_PTR(ret);
}
add_new_free_space(cache, chunk_offset, chunk_offset + size);
......@@ -2335,7 +2354,7 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans, u64 bytes_used,
if (ret) {
btrfs_remove_free_space_cache(cache);
btrfs_put_block_group(cache);
return ret;
return ERR_PTR(ret);
}
/*
......@@ -2354,7 +2373,7 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans, u64 bytes_used,
btrfs_update_delayed_refs_rsv(trans);
set_avail_alloc_bits(fs_info, type);
return 0;
return cache;
}
/*
......@@ -3232,11 +3251,203 @@ int btrfs_force_chunk_alloc(struct btrfs_trans_handle *trans, u64 type)
return btrfs_chunk_alloc(trans, alloc_flags, CHUNK_ALLOC_FORCE);
}
static int do_chunk_alloc(struct btrfs_trans_handle *trans, u64 flags)
{
struct btrfs_block_group *bg;
int ret;
/*
* Check if we have enough space in the system space info because we
* will need to update device items in the chunk btree and insert a new
* chunk item in the chunk btree as well. This will allocate a new
* system block group if needed.
*/
check_system_chunk(trans, flags);
bg = btrfs_alloc_chunk(trans, flags);
if (IS_ERR(bg)) {
ret = PTR_ERR(bg);
goto out;
}
/*
* If this is a system chunk allocation then stop right here and do not
* add the chunk item to the chunk btree. This is to prevent a deadlock
* because this system chunk allocation can be triggered while COWing
* some extent buffer of the chunk btree and while holding a lock on a
* parent extent buffer, in which case attempting to insert the chunk
* item (or update the device item) would result in a deadlock on that
* parent extent buffer. In this case defer the chunk btree updates to
* the second phase of chunk allocation and keep our reservation until
* the second phase completes.
*
* This is a rare case and can only be triggered by the very few cases
* we have where we need to touch the chunk btree outside chunk allocation
* and chunk removal. These cases are basically adding a device, removing
* a device or resizing a device.
*/
if (flags & BTRFS_BLOCK_GROUP_SYSTEM)
return 0;
ret = btrfs_chunk_alloc_add_chunk_item(trans, bg);
/*
* Normally we are not expected to fail with -ENOSPC here, since we have
* previously reserved space in the system space_info and allocated one
* new system chunk if necessary. However there are two exceptions:
*
* 1) We may have enough free space in the system space_info but all the
* existing system block groups have a profile which can not be used
* for extent allocation.
*
* This happens when mounting in degraded mode. For example we have a
* RAID1 filesystem with 2 devices, lose one device and mount the fs
* using the other device in degraded mode. If we then allocate a chunk,
* we may have enough free space in the existing system space_info, but
* none of the block groups can be used for extent allocation since they
* have a RAID1 profile, and because we are in degraded mode with a
* single device, we are forced to allocate a new system chunk with a
* SINGLE profile. Making check_system_chunk() iterate over all system
* block groups and check if they have a usable profile and enough space
* can be slow on very large filesystems, so we tolerate the -ENOSPC and
* try again after forcing allocation of a new system chunk. Like this
* we avoid paying the cost of that search in normal circumstances, when
* we were not mounted in degraded mode;
*
* 2) We had enough free space info the system space_info, and one suitable
* block group to allocate from when we called check_system_chunk()
* above. However right after we called it, the only system block group
* with enough free space got turned into RO mode by a running scrub,
* and in this case we have to allocate a new one and retry. We only
* need do this allocate and retry once, since we have a transaction
* handle and scrub uses the commit root to search for block groups.
*/
if (ret == -ENOSPC) {
const u64 sys_flags = btrfs_system_alloc_profile(trans->fs_info);
struct btrfs_block_group *sys_bg;
sys_bg = btrfs_alloc_chunk(trans, sys_flags);
if (IS_ERR(sys_bg)) {
ret = PTR_ERR(sys_bg);
btrfs_abort_transaction(trans, ret);
goto out;
}
ret = btrfs_chunk_alloc_add_chunk_item(trans, sys_bg);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto out;
}
ret = btrfs_chunk_alloc_add_chunk_item(trans, bg);
if (ret) {
btrfs_abort_transaction(trans, ret);
goto out;
}
} else if (ret) {
btrfs_abort_transaction(trans, ret);
goto out;
}
out:
btrfs_trans_release_chunk_metadata(trans);
return ret;
}
/*
* If force is CHUNK_ALLOC_FORCE:
* Chunk allocation is done in 2 phases:
*
* 1) Phase 1 - through btrfs_chunk_alloc() we allocate device extents for
* the chunk, the chunk mapping, create its block group and add the items
* that belong in the chunk btree to it - more specifically, we need to
* update device items in the chunk btree and add a new chunk item to it.
*
* 2) Phase 2 - through btrfs_create_pending_block_groups(), we add the block
* group item to the extent btree and the device extent items to the devices
* btree.
*
* This is done to prevent deadlocks. For example when COWing a node from the
* extent btree we are holding a write lock on the node's parent and if we
* trigger chunk allocation and attempted to insert the new block group item
* in the extent btree right way, we could deadlock because the path for the
* insertion can include that parent node. At first glance it seems impossible
* to trigger chunk allocation after starting a transaction since tasks should
* reserve enough transaction units (metadata space), however while that is true
* most of the time, chunk allocation may still be triggered for several reasons:
*
* 1) When reserving metadata, we check if there is enough free space in the
* metadata space_info and therefore don't trigger allocation of a new chunk.
* However later when the task actually tries to COW an extent buffer from
* the extent btree or from the device btree for example, it is forced to
* allocate a new block group (chunk) because the only one that had enough
* free space was just turned to RO mode by a running scrub for example (or
* device replace, block group reclaim thread, etc), so we can not use it
* for allocating an extent and end up being forced to allocate a new one;
*
* 2) Because we only check that the metadata space_info has enough free bytes,
* we end up not allocating a new metadata chunk in that case. However if
* the filesystem was mounted in degraded mode, none of the existing block
* groups might be suitable for extent allocation due to their incompatible
* profile (for e.g. mounting a 2 devices filesystem, where all block groups
* use a RAID1 profile, in degraded mode using a single device). In this case
* when the task attempts to COW some extent buffer of the extent btree for
* example, it will trigger allocation of a new metadata block group with a
* suitable profile (SINGLE profile in the example of the degraded mount of
* the RAID1 filesystem);
*
* 3) The task has reserved enough transaction units / metadata space, but when
* it attempts to COW an extent buffer from the extent or device btree for
* example, it does not find any free extent in any metadata block group,
* therefore forced to try to allocate a new metadata block group.
* This is because some other task allocated all available extents in the
* meanwhile - this typically happens with tasks that don't reserve space
* properly, either intentionally or as a bug. One example where this is
* done intentionally is fsync, as it does not reserve any transaction units
* and ends up allocating a variable number of metadata extents for log
* tree extent buffers.
*
* We also need this 2 phases setup when adding a device to a filesystem with
* a seed device - we must create new metadata and system chunks without adding
* any of the block group items to the chunk, extent and device btrees. If we
* did not do it this way, we would get ENOSPC when attempting to update those
* btrees, since all the chunks from the seed device are read-only.
*
* Phase 1 does the updates and insertions to the chunk btree because if we had
* it done in phase 2 and have a thundering herd of tasks allocating chunks in
* parallel, we risk having too many system chunks allocated by many tasks if
* many tasks reach phase 1 without the previous ones completing phase 2. In the
* extreme case this leads to exhaustion of the system chunk array in the
* superblock. This is easier to trigger if using a btree node/leaf size of 64K
* and with RAID filesystems (so we have more device items in the chunk btree).
* This has happened before and commit eafa4fd0ad0607 ("btrfs: fix exhaustion of
* the system chunk array due to concurrent allocations") provides more details.
*
* For allocation of system chunks, we defer the updates and insertions into the
* chunk btree to phase 2. This is to prevent deadlocks on extent buffers because
* if the chunk allocation is triggered while COWing an extent buffer of the
* chunk btree, we are holding a lock on the parent of that extent buffer and
* doing the chunk btree updates and insertions can require locking that parent.
* This is for the very few and rare cases where we update the chunk btree that
* are not chunk allocation or chunk removal: adding a device, removing a device
* or resizing a device.
*
* The reservation of system space, done through check_system_chunk(), as well
* as all the updates and insertions into the chunk btree must be done while
* holding fs_info->chunk_mutex. This is important to guarantee that while COWing
* an extent buffer from the chunks btree we never trigger allocation of a new
* system chunk, which would result in a deadlock (trying to lock twice an
* extent buffer of the chunk btree, first time before triggering the chunk
* allocation and the second time during chunk allocation while attempting to
* update the chunks btree). The system chunk array is also updated while holding
* that mutex. The same logic applies to removing chunks - we must reserve system
* space, update the chunk btree and the system chunk array in the superblock
* while holding fs_info->chunk_mutex.
*
* This function, btrfs_chunk_alloc(), belongs to phase 1.
*
* If @force is CHUNK_ALLOC_FORCE:
* - return 1 if it successfully allocates a chunk,
* - return errors including -ENOSPC otherwise.
* If force is NOT CHUNK_ALLOC_FORCE:
* If @force is NOT CHUNK_ALLOC_FORCE:
* - return 0 if it doesn't need to allocate a new chunk,
* - return 1 if it successfully allocates a chunk,
* - return errors including -ENOSPC otherwise.
......@@ -3253,6 +3464,13 @@ int btrfs_chunk_alloc(struct btrfs_trans_handle *trans, u64 flags,
/* Don't re-enter if we're already allocating a chunk */
if (trans->allocating_chunk)
return -ENOSPC;
/*
* If we are removing a chunk, don't re-enter or we would deadlock.
* System space reservation and system chunk allocation is done by the
* chunk remove operation (btrfs_remove_chunk()).
*/
if (trans->removing_chunk)
return -ENOSPC;
space_info = btrfs_find_space_info(fs_info, flags);
ASSERT(space_info);
......@@ -3316,13 +3534,7 @@ int btrfs_chunk_alloc(struct btrfs_trans_handle *trans, u64 flags,
force_metadata_allocation(fs_info);
}
/*
* Check if we have enough space in SYSTEM chunk because we may need
* to update devices.
*/
check_system_chunk(trans, flags);
ret = btrfs_alloc_chunk(trans, flags);
ret = do_chunk_alloc(trans, flags);
trans->allocating_chunk = false;
spin_lock(&space_info->lock);
......@@ -3341,22 +3553,6 @@ int btrfs_chunk_alloc(struct btrfs_trans_handle *trans, u64 flags,
space_info->chunk_alloc = 0;
spin_unlock(&space_info->lock);
mutex_unlock(&fs_info->chunk_mutex);
/*
* When we allocate a new chunk we reserve space in the chunk block
* reserve to make sure we can COW nodes/leafs in the chunk tree or
* add new nodes/leafs to it if we end up needing to do it when
* inserting the chunk item and updating device items as part of the
* second phase of chunk allocation, performed by
* btrfs_finish_chunk_alloc(). So make sure we don't accumulate a
* large number of new block groups to create in our transaction
* handle's new_bgs list to avoid exhausting the chunk block reserve
* in extreme cases - like having a single transaction create many new
* block groups when starting to write out the free space caches of all
* the block groups that were made dirty during the lifetime of the
* transaction.
*/
if (trans->chunk_bytes_reserved >= (u64)SZ_2M)
btrfs_create_pending_block_groups(trans);
return ret;
}
......@@ -3409,14 +3605,31 @@ void check_system_chunk(struct btrfs_trans_handle *trans, u64 type)
if (left < thresh) {
u64 flags = btrfs_system_alloc_profile(fs_info);
struct btrfs_block_group *bg;
/*
* Ignore failure to create system chunk. We might end up not
* needing it, as we might not need to COW all nodes/leafs from
* the paths we visit in the chunk tree (they were already COWed
* or created in the current transaction for example).
*
* Also, if our caller is allocating a system chunk, do not
* attempt to insert the chunk item in the chunk btree, as we
* could deadlock on an extent buffer since our caller may be
* COWing an extent buffer from the chunk btree.
*/
ret = btrfs_alloc_chunk(trans, flags);
bg = btrfs_alloc_chunk(trans, flags);
if (IS_ERR(bg)) {
ret = PTR_ERR(bg);
} else if (!(type & BTRFS_BLOCK_GROUP_SYSTEM)) {
/*
* If we fail to add the chunk item here, we end up
* trying again at phase 2 of chunk allocation, at
* btrfs_create_pending_block_groups(). So ignore
* any error here.
*/
btrfs_chunk_alloc_add_chunk_item(trans, bg);
}
}
if (!ret) {
......
......@@ -97,6 +97,7 @@ struct btrfs_block_group {
unsigned int removed:1;
unsigned int to_copy:1;
unsigned int relocating_repair:1;
unsigned int chunk_item_inserted:1;
int disk_cache_state;
......@@ -268,8 +269,9 @@ void btrfs_reclaim_bgs_work(struct work_struct *work);
void btrfs_reclaim_bgs(struct btrfs_fs_info *fs_info);
void btrfs_mark_bg_to_reclaim(struct btrfs_block_group *bg);
int btrfs_read_block_groups(struct btrfs_fs_info *info);
int btrfs_make_block_group(struct btrfs_trans_handle *trans, u64 bytes_used,
u64 type, u64 chunk_offset, u64 size);
struct btrfs_block_group *btrfs_make_block_group(struct btrfs_trans_handle *trans,
u64 bytes_used, u64 type,
u64 chunk_offset, u64 size);
void btrfs_create_pending_block_groups(struct btrfs_trans_handle *trans);
int btrfs_inc_block_group_ro(struct btrfs_block_group *cache,
bool do_chunk_alloc);
......
......@@ -364,49 +364,6 @@ static noinline int update_ref_for_cow(struct btrfs_trans_handle *trans,
return 0;
}
static struct extent_buffer *alloc_tree_block_no_bg_flush(
struct btrfs_trans_handle *trans,
struct btrfs_root *root,
u64 parent_start,
const struct btrfs_disk_key *disk_key,
int level,
u64 hint,
u64 empty_size,
enum btrfs_lock_nesting nest)
{
struct btrfs_fs_info *fs_info = root->fs_info;
struct extent_buffer *ret;
/*
* If we are COWing a node/leaf from the extent, chunk, device or free
* space trees, make sure that we do not finish block group creation of
* pending block groups. We do this to avoid a deadlock.
* COWing can result in allocation of a new chunk, and flushing pending
* block groups (btrfs_create_pending_block_groups()) can be triggered
* when finishing allocation of a new chunk. Creation of a pending block
* group modifies the extent, chunk, device and free space trees,
* therefore we could deadlock with ourselves since we are holding a
* lock on an extent buffer that btrfs_create_pending_block_groups() may
* try to COW later.
* For similar reasons, we also need to delay flushing pending block
* groups when splitting a leaf or node, from one of those trees, since
* we are holding a write lock on it and its parent or when inserting a
* new root node for one of those trees.
*/
if (root == fs_info->extent_root ||
root == fs_info->chunk_root ||
root == fs_info->dev_root ||
root == fs_info->free_space_root)
trans->can_flush_pending_bgs = false;
ret = btrfs_alloc_tree_block(trans, root, parent_start,
root->root_key.objectid, disk_key, level,
hint, empty_size, nest);
trans->can_flush_pending_bgs = true;
return ret;
}
/*
* does the dirty work in cow of a single block. The parent block (if
* supplied) is updated to point to the new cow copy. The new buffer is marked
......@@ -455,8 +412,9 @@ static noinline int __btrfs_cow_block(struct btrfs_trans_handle *trans,
if ((root->root_key.objectid == BTRFS_TREE_RELOC_OBJECTID) && parent)
parent_start = parent->start;
cow = alloc_tree_block_no_bg_flush(trans, root, parent_start, &disk_key,
level, search_start, empty_size, nest);
cow = btrfs_alloc_tree_block(trans, root, parent_start,
root->root_key.objectid, &disk_key, level,
search_start, empty_size, nest);
if (IS_ERR(cow))
return PTR_ERR(cow);
......@@ -2458,9 +2416,9 @@ static noinline int insert_new_root(struct btrfs_trans_handle *trans,
else
btrfs_node_key(lower, &lower_key, 0);
c = alloc_tree_block_no_bg_flush(trans, root, 0, &lower_key, level,
root->node->start, 0,
BTRFS_NESTING_NEW_ROOT);
c = btrfs_alloc_tree_block(trans, root, 0, root->root_key.objectid,
&lower_key, level, root->node->start, 0,
BTRFS_NESTING_NEW_ROOT);
if (IS_ERR(c))
return PTR_ERR(c);
......@@ -2589,8 +2547,9 @@ static noinline int split_node(struct btrfs_trans_handle *trans,
mid = (c_nritems + 1) / 2;
btrfs_node_key(c, &disk_key, mid);
split = alloc_tree_block_no_bg_flush(trans, root, 0, &disk_key, level,
c->start, 0, BTRFS_NESTING_SPLIT);
split = btrfs_alloc_tree_block(trans, root, 0, root->root_key.objectid,
&disk_key, level, c->start, 0,
BTRFS_NESTING_SPLIT);
if (IS_ERR(split))
return PTR_ERR(split);
......@@ -3381,10 +3340,10 @@ static noinline int split_leaf(struct btrfs_trans_handle *trans,
* BTRFS_NESTING_SPLIT_THE_SPLITTENING if we need to, but for now just
* use BTRFS_NESTING_NEW_ROOT.
*/
right = alloc_tree_block_no_bg_flush(trans, root, 0, &disk_key, 0,
l->start, 0, num_doubles ?
BTRFS_NESTING_NEW_ROOT :
BTRFS_NESTING_SPLIT);
right = btrfs_alloc_tree_block(trans, root, 0, root->root_key.objectid,
&disk_key, 0, l->start, 0,
num_doubles ? BTRFS_NESTING_NEW_ROOT :
BTRFS_NESTING_SPLIT);
if (IS_ERR(right))
return PTR_ERR(right);
......
......@@ -254,8 +254,11 @@ static inline int extwriter_counter_read(struct btrfs_transaction *trans)
}
/*
* To be called after all the new block groups attached to the transaction
* handle have been created (btrfs_create_pending_block_groups()).
* To be called after doing the chunk btree updates right after allocating a new
* chunk (after btrfs_chunk_alloc_add_chunk_item() is called), when removing a
* chunk after all chunk btree updates and after finishing the second phase of
* chunk allocation (btrfs_create_pending_block_groups()) in case some block
* group had its chunk item insertion delayed to the second phase.
*/
void btrfs_trans_release_chunk_metadata(struct btrfs_trans_handle *trans)
{
......@@ -264,8 +267,6 @@ void btrfs_trans_release_chunk_metadata(struct btrfs_trans_handle *trans)
if (!trans->chunk_bytes_reserved)
return;
WARN_ON_ONCE(!list_empty(&trans->new_bgs));
btrfs_block_rsv_release(fs_info, &fs_info->chunk_block_rsv,
trans->chunk_bytes_reserved, NULL);
trans->chunk_bytes_reserved = 0;
......@@ -696,7 +697,6 @@ start_transaction(struct btrfs_root *root, unsigned int num_items,
h->fs_info = root->fs_info;
h->type = type;
h->can_flush_pending_bgs = true;
INIT_LIST_HEAD(&h->new_bgs);
smp_mb();
......
......@@ -132,7 +132,7 @@ struct btrfs_trans_handle {
short aborted;
bool adding_csums;
bool allocating_chunk;
bool can_flush_pending_bgs;
bool removing_chunk;
bool reloc_reserved;
bool in_fsync;
struct btrfs_root *root;
......
此差异已折叠。
......@@ -450,7 +450,8 @@ int btrfs_get_io_geometry(struct btrfs_fs_info *fs_info, struct extent_map *map,
struct btrfs_io_geometry *io_geom);
int btrfs_read_sys_array(struct btrfs_fs_info *fs_info);
int btrfs_read_chunk_tree(struct btrfs_fs_info *fs_info);
int btrfs_alloc_chunk(struct btrfs_trans_handle *trans, u64 type);
struct btrfs_block_group *btrfs_alloc_chunk(struct btrfs_trans_handle *trans,
u64 type);
void btrfs_mapping_tree_free(struct extent_map_tree *tree);
blk_status_t btrfs_map_bio(struct btrfs_fs_info *fs_info, struct bio *bio,
int mirror_num);
......@@ -509,6 +510,8 @@ unsigned long btrfs_full_stripe_len(struct btrfs_fs_info *fs_info,
u64 logical);
int btrfs_finish_chunk_alloc(struct btrfs_trans_handle *trans,
u64 chunk_offset, u64 chunk_size);
int btrfs_chunk_alloc_add_chunk_item(struct btrfs_trans_handle *trans,
struct btrfs_block_group *bg);
int btrfs_remove_chunk(struct btrfs_trans_handle *trans, u64 chunk_offset);
struct extent_map *btrfs_get_chunk_map(struct btrfs_fs_info *fs_info,
u64 logical, u64 length);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册