[SCSI] aic7xxx: upport all sequencer and core fixes from adaptec version 6.3.9

This patch upports all relevant code fixes and bumps the driver version
to 7.0 to signify starting a new tree.
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Documentation/scsi/aic7xxx.txt

 ====================================================================
-=    Adaptec Aic7xxx Fast -> Ultra160 Family Manager Set v6.2.28   =
+=    Adaptec Aic7xxx Fast -> Ultra160 Family Manager Set v7.0      =
 =                            README for                            =
 =                     The Linux Operating System                   =
 ====================================================================
@@ -131,6 +131,10 @@ The following information is available in this file:
       SCSI "stub" effects.
 
 2. Version History
+   7.0	  (4th August, 2005)
+	- Updated driver to use SCSI transport class infrastructure
+	- Upported sequencer and core fixes from last adaptec released
+	  version of the driver.
    6.2.36 (June 3rd, 2003)
         - Correct code that disables PCI parity error checking.
         - Correct and simplify handling of the ignore wide residue

drivers/scsi/aic7xxx/aic7xxx.h

@@ -37,7 +37,7 @@
  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGES.
  *
- * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.h#79 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.h#85 $
  *
  * $FreeBSD$
  */
@@ -243,7 +243,7 @@ typedef enum {
 	 */
 	AHC_AIC7850_FE	= AHC_SPIOCAP|AHC_AUTOPAUSE|AHC_TARGETMODE|AHC_ULTRA,
 	AHC_AIC7860_FE	= AHC_AIC7850_FE,
-	AHC_AIC7870_FE	= AHC_TARGETMODE,
+	AHC_AIC7870_FE	= AHC_TARGETMODE|AHC_AUTOPAUSE,
 	AHC_AIC7880_FE	= AHC_AIC7870_FE|AHC_ULTRA,
 	/*
 	 * Although we have space for both the initiator and

drivers/scsi/aic7xxx/aic7xxx.reg

@@ -39,7 +39,7 @@
  *
  * $FreeBSD$
  */
-VERSION = "$Id: //depot/aic7xxx/aic7xxx/aic7xxx.reg#39 $"
+VERSION = "$Id: //depot/aic7xxx/aic7xxx/aic7xxx.reg#40 $"
 
 /*
  * This file is processed by the aic7xxx_asm utility for use in assembling
@@ -1306,7 +1306,6 @@ scratch_ram {
 	 */
 	MWI_RESIDUAL {
 		size		1
-		alias	TARG_IMMEDIATE_SCB
 	}
 	/*
 	 * SCBID of the next SCB to be started by the controller.
@@ -1461,6 +1460,7 @@ scratch_ram {
 	 */
 	LAST_MSG {
 		size		1
+		alias	TARG_IMMEDIATE_SCB
 	}
 
 	/*

drivers/scsi/aic7xxx/aic7xxx.seq

@@ -40,7 +40,7 @@
  * $FreeBSD$
  */
 
-VERSION = "$Id: //depot/aic7xxx/aic7xxx/aic7xxx.seq#56 $"
+VERSION = "$Id: //depot/aic7xxx/aic7xxx/aic7xxx.seq#58 $"
 PATCH_ARG_LIST = "struct ahc_softc *ahc"
 PREFIX = "ahc_"
 
@@ -679,6 +679,7 @@ await_busfree:
 		clr	SCSIBUSL;	/* Prevent bit leakage durint SELTO */
 	}
 	and	SXFRCTL0, ~SPIOEN;
+	mvi	SEQ_FLAGS, NOT_IDENTIFIED|NO_CDB_SENT;
 	test	SSTAT1,REQINIT|BUSFREE	jz .;
 	test	SSTAT1, BUSFREE jnz poll_for_work;
 	mvi	MISSED_BUSFREE call set_seqint;
@@ -1097,7 +1098,7 @@ ultra2_dmahalt:
 		test	SCB_RESIDUAL_DATACNT[3], SG_LAST_SEG jz dma_mid_sg;
 		if ((ahc->flags & AHC_TARGETROLE) != 0) {
 			test	SSTAT0, TARGET jz dma_last_sg;
-			if ((ahc->flags & AHC_TMODE_WIDEODD_BUG) != 0) {
+			if ((ahc->bugs & AHC_TMODE_WIDEODD_BUG) != 0) {
 				test	DMAPARAMS, DIRECTION jz dma_mid_sg;
 			}
 		}

drivers/scsi/aic7xxx/aic7xxx_93cx6.c

@@ -28,9 +28,7 @@
  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  * SUCH DAMAGE.
  *
- * $Id: //depot/aic7xxx/aic7xxx/aic7xxx_93cx6.c#17 $
- *
- * $FreeBSD$
+ * $Id: //depot/aic7xxx/aic7xxx/aic7xxx_93cx6.c#19 $
  */
 
 /*
@@ -64,7 +62,6 @@
  *   is preceded by an initial zero (leading 0, followed by 16-bits, MSB
  *   first).  The clock cycling from low to high initiates the next data
  *   bit to be sent from the chip.
- *
  */
 
 #ifdef __linux__
@@ -81,14 +78,22 @@
  * Right now, we only have to read the SEEPROM.  But we make it easier to
  * add other 93Cx6 functions.
  */
-static struct seeprom_cmd {
+struct seeprom_cmd {
   	uint8_t len;
- 	uint8_t bits[9];
-} seeprom_read = {3, {1, 1, 0}};
+ 	uint8_t bits[11];
+};
 
+/* Short opcodes for the c46 */
 static struct seeprom_cmd seeprom_ewen = {9, {1, 0, 0, 1, 1, 0, 0, 0, 0}};
 static struct seeprom_cmd seeprom_ewds = {9, {1, 0, 0, 0, 0, 0, 0, 0, 0}};
+
+/* Long opcodes for the C56/C66 */
+static struct seeprom_cmd seeprom_long_ewen = {11, {1, 0, 0, 1, 1, 0, 0, 0, 0}};
+static struct seeprom_cmd seeprom_long_ewds = {11, {1, 0, 0, 0, 0, 0, 0, 0, 0}};
+
+/* Common opcodes */
 static struct seeprom_cmd seeprom_write = {3, {1, 0, 1}};
+static struct seeprom_cmd seeprom_read  = {3, {1, 1, 0}};
 
 /*
  * Wait for the SEERDY to go high; about 800 ns.
@@ -222,12 +227,25 @@ int
 ahc_write_seeprom(struct seeprom_descriptor *sd, uint16_t *buf,
 		  u_int start_addr, u_int count)
 {
+	struct seeprom_cmd *ewen, *ewds;
 	uint16_t v;
 	uint8_t temp;
 	int i, k;
 
 	/* Place the chip into write-enable mode */
-	send_seeprom_cmd(sd, &seeprom_ewen);
+	if (sd->sd_chip == C46) {
+		ewen = &seeprom_ewen;
+		ewds = &seeprom_ewds;
+	} else if (sd->sd_chip == C56_66) {
+		ewen = &seeprom_long_ewen;
+		ewds = &seeprom_long_ewds;
+	} else {
+		printf("ahc_write_seeprom: unsupported seeprom type %d\n",
+		       sd->sd_chip);
+		return (0);
+	}
+
+	send_seeprom_cmd(sd, ewen);
 	reset_seeprom(sd);
 
 	/* Write all requested data out to the seeprom. */
@@ -277,7 +295,7 @@ ahc_write_seeprom(struct seeprom_descriptor *sd, uint16_t *buf,
 	}
 
 	/* Put the chip back into write-protect mode */
-	send_seeprom_cmd(sd, &seeprom_ewds);
+	send_seeprom_cmd(sd, ewds);
 	reset_seeprom(sd);
 
 	return (1);

drivers/scsi/aic7xxx/aic7xxx_core.c

@@ -37,9 +37,7 @@
  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  * POSSIBILITY OF SUCH DAMAGES.
  *
- * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.c#134 $
- *
- * $FreeBSD$
+ * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.c#155 $
  */
 
 #ifdef __linux__
@@ -287,10 +285,19 @@ ahc_restart(struct ahc_softc *ahc)
 		ahc_outb(ahc, SEQ_FLAGS2,
 			 ahc_inb(ahc, SEQ_FLAGS2) & ~SCB_DMA);
 	}
+
+	/*
+	 * Clear any pending sequencer interrupt.  It is no
+	 * longer relevant since we're resetting the Program
+	 * Counter.
+	 */
+	ahc_outb(ahc, CLRINT, CLRSEQINT);
+
 	ahc_outb(ahc, MWI_RESIDUAL, 0);
 	ahc_outb(ahc, SEQCTL, ahc->seqctl);
 	ahc_outb(ahc, SEQADDR0, 0);
 	ahc_outb(ahc, SEQADDR1, 0);
+
 	ahc_unpause(ahc);
 }
 
@@ -1174,19 +1181,20 @@ ahc_handle_scsiint(struct ahc_softc *ahc, u_int intstat)
 				       scb_index);
 			}
 #endif
-			/*
-			 * Force a renegotiation with this target just in
-			 * case the cable was pulled and will later be
-			 * re-attached.  The target may forget its negotiation
-			 * settings with us should it attempt to reselect
-			 * during the interruption.  The target will not issue
-			 * a unit attention in this case, so we must always
-			 * renegotiate.
-			 */
 			ahc_scb_devinfo(ahc, &devinfo, scb);
-			ahc_force_renegotiation(ahc, &devinfo);
 			ahc_set_transaction_status(scb, CAM_SEL_TIMEOUT);
 			ahc_freeze_devq(ahc, scb);
+
+			/*
+			 * Cancel any pending transactions on the device
+			 * now that it seems to be missing.  This will
+			 * also revert us to async/narrow transfers until
+			 * we can renegotiate with the device.
+			 */
+			ahc_handle_devreset(ahc, &devinfo,
+					    CAM_SEL_TIMEOUT,
+					    "Selection Timeout",
+					    /*verbose_level*/1);
 		}
 		ahc_outb(ahc, CLRINT, CLRSCSIINT);
 		ahc_restart(ahc);
@@ -3763,8 +3771,9 @@ ahc_handle_devreset(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
 			 /*period*/0, /*offset*/0, /*ppr_options*/0,
 			 AHC_TRANS_CUR, /*paused*/TRUE);
 	
-	ahc_send_async(ahc, devinfo->channel, devinfo->target,
-		       CAM_LUN_WILDCARD, AC_SENT_BDR, NULL);
+	if (status != CAM_SEL_TIMEOUT)
+		ahc_send_async(ahc, devinfo->channel, devinfo->target,
+			       CAM_LUN_WILDCARD, AC_SENT_BDR, NULL);
 
 	if (message != NULL
 	 && (verbose_level <= bootverbose))
@@ -4003,14 +4012,6 @@ ahc_reset(struct ahc_softc *ahc, int reinit)
 	 * to disturb the integrity of the bus.
 	 */
 	ahc_pause(ahc);
-	if ((ahc_inb(ahc, HCNTRL) & CHIPRST) != 0) {
-		/*
-		 * The chip has not been initialized since
-		 * PCI/EISA/VLB bus reset.  Don't trust
-		 * "left over BIOS data".
-		 */
-		ahc->flags |= AHC_NO_BIOS_INIT;
-	}
 	sxfrctl1_b = 0;
 	if ((ahc->chip & AHC_CHIPID_MASK) == AHC_AIC7770) {
 		u_int sblkctl;
@@ -5036,14 +5037,23 @@ ahc_pause_and_flushwork(struct ahc_softc *ahc)
 	ahc->flags |= AHC_ALL_INTERRUPTS;
 	paused = FALSE;
 	do {
-		if (paused)
+		if (paused) {
 			ahc_unpause(ahc);
+			/*
+			 * Give the sequencer some time to service
+			 * any active selections.
+			 */
+			ahc_delay(500);
+		}
 		ahc_intr(ahc);
 		ahc_pause(ahc);
 		paused = TRUE;
 		ahc_outb(ahc, SCSISEQ, ahc_inb(ahc, SCSISEQ) & ~ENSELO);
-		ahc_clear_critical_section(ahc);
 		intstat = ahc_inb(ahc, INTSTAT);
+		if ((intstat & INT_PEND) == 0) {
+			ahc_clear_critical_section(ahc);
+			intstat = ahc_inb(ahc, INTSTAT);
+		}
 	} while (--maxloops
 	      && (intstat != 0xFF || (ahc->features & AHC_REMOVABLE) == 0)
 	      && ((intstat & INT_PEND) != 0

drivers/scsi/aic7xxx/aic7xxx_osm.c

@@ -635,6 +635,8 @@ ahc_linux_slave_alloc(struct scsi_device *sdev)
 	
 	targ->sdev[sdev->lun] = sdev;
 
+	spi_period(starget) = 0;
+
 	return 0;
 }
 

drivers/scsi/aic7xxx/aic7xxx_osm.h

@@ -265,7 +265,7 @@ ahc_scb_timer_reset(struct scb *scb, u_int usec)
 /***************************** SMP support ************************************/
 #include <linux/spinlock.h>
 
-#define AIC7XXX_DRIVER_VERSION "6.2.36"
+#define AIC7XXX_DRIVER_VERSION "7.0"
 
 /*************************** Device Data Structures ***************************/
 /*

drivers/scsi/aic7xxx/aic7xxx_reg.h_shipped

@@ -2,8 +2,8 @@
  * DO NOT EDIT - This file is automatically generated
  *		 from the following source files:
  *
- * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.seq#56 $
- * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.reg#39 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.seq#58 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.reg#40 $
  */
 typedef int (ahc_reg_print_t)(u_int, u_int *, u_int);
 typedef struct ahc_reg_parse_entry {
@@ -1298,7 +1298,6 @@ ahc_reg_print_t ahc_sg_cache_pre_print;
 #define	CMDSIZE_TABLE_TAIL		0x34
 
 #define	MWI_RESIDUAL    		0x38
-#define	TARG_IMMEDIATE_SCB		0x38
 
 #define	NEXT_QUEUED_SCB 		0x39
 
@@ -1380,6 +1379,7 @@ ahc_reg_print_t ahc_sg_cache_pre_print;
 #define	RETURN_2        		0x52
 
 #define	LAST_MSG        		0x53
+#define	TARG_IMMEDIATE_SCB		0x53
 
 #define	SCSISEQ_TEMPLATE		0x54
 #define		ENSELO          	0x40

drivers/scsi/aic7xxx/aic7xxx_reg_print.c_shipped

@@ -2,8 +2,8 @@
  * DO NOT EDIT - This file is automatically generated
  *		 from the following source files:
  *
- * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.seq#56 $
- * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.reg#39 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.seq#58 $
+ * $Id: //depot/aic7xxx/aic7xxx/aic7xxx.reg#40 $
  */
 
 #include "aic7xxx_osm.h"