提交 79523473 编写于 作者: A Andrew Lunn 提交者: David S. Miller

net: dsa: mv88e6xxx: Add mv88e6390 stats snapshot operation

The MV88E6390 has a control register for what the histogram statistics
actually contain. This means the stat_snapshot method should not set
this information. So implement the 6390 stats_snapshot function without
these bits.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 4b325d8c
......@@ -3283,6 +3283,7 @@ static const struct mv88e6xxx_ops mv88e6190_ops = {
.port_set_duplex = mv88e6xxx_port_set_duplex,
.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
.port_set_speed = mv88e6390_port_set_speed,
.stats_snapshot = mv88e6390_g1_stats_snapshot,
};
static const struct mv88e6xxx_ops mv88e6190x_ops = {
......@@ -3294,6 +3295,7 @@ static const struct mv88e6xxx_ops mv88e6190x_ops = {
.port_set_duplex = mv88e6xxx_port_set_duplex,
.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
.port_set_speed = mv88e6390x_port_set_speed,
.stats_snapshot = mv88e6390_g1_stats_snapshot,
};
static const struct mv88e6xxx_ops mv88e6191_ops = {
......@@ -3305,6 +3307,7 @@ static const struct mv88e6xxx_ops mv88e6191_ops = {
.port_set_duplex = mv88e6xxx_port_set_duplex,
.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
.port_set_speed = mv88e6390_port_set_speed,
.stats_snapshot = mv88e6390_g1_stats_snapshot,
};
static const struct mv88e6xxx_ops mv88e6240_ops = {
......@@ -3330,6 +3333,7 @@ static const struct mv88e6xxx_ops mv88e6290_ops = {
.port_set_duplex = mv88e6xxx_port_set_duplex,
.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
.port_set_speed = mv88e6390_port_set_speed,
.stats_snapshot = mv88e6390_g1_stats_snapshot,
};
static const struct mv88e6xxx_ops mv88e6320_ops = {
......@@ -3405,6 +3409,7 @@ static const struct mv88e6xxx_ops mv88e6390_ops = {
.port_set_duplex = mv88e6xxx_port_set_duplex,
.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
.port_set_speed = mv88e6390_port_set_speed,
.stats_snapshot = mv88e6390_g1_stats_snapshot,
};
static const struct mv88e6xxx_ops mv88e6390x_ops = {
......@@ -3416,6 +3421,7 @@ static const struct mv88e6xxx_ops mv88e6390x_ops = {
.port_set_duplex = mv88e6xxx_port_set_duplex,
.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
.port_set_speed = mv88e6390x_port_set_speed,
.stats_snapshot = mv88e6390_g1_stats_snapshot,
};
static const struct mv88e6xxx_ops mv88e6391_ops = {
......@@ -3427,6 +3433,7 @@ static const struct mv88e6xxx_ops mv88e6391_ops = {
.port_set_duplex = mv88e6xxx_port_set_duplex,
.port_set_rgmii_delay = mv88e6390_port_set_rgmii_delay,
.port_set_speed = mv88e6390_port_set_speed,
.stats_snapshot = mv88e6390_g1_stats_snapshot,
};
static const struct mv88e6xxx_info mv88e6xxx_table[] = {
......
......@@ -59,3 +59,19 @@ int mv88e6320_g1_stats_snapshot(struct mv88e6xxx_chip *chip, int port)
return mv88e6xxx_g1_stats_snapshot(chip, port);
}
int mv88e6390_g1_stats_snapshot(struct mv88e6xxx_chip *chip, int port)
{
int err;
port = (port + 1) << 5;
/* Snapshot the hardware statistics counters for this port. */
err = mv88e6xxx_g1_write(chip, GLOBAL_STATS_OP,
GLOBAL_STATS_OP_CAPTURE_PORT | port);
if (err)
return err;
/* Wait for the snapshotting to complete. */
return mv88e6xxx_g1_stats_wait(chip);
}
......@@ -21,5 +21,6 @@ int mv88e6xxx_g1_write(struct mv88e6xxx_chip *chip, int reg, u16 val);
int mv88e6xxx_g1_wait(struct mv88e6xxx_chip *chip, int reg, u16 mask);
int mv88e6xxx_g1_stats_snapshot(struct mv88e6xxx_chip *chip, int port);
int mv88e6320_g1_stats_snapshot(struct mv88e6xxx_chip *chip, int port);
int mv88e6390_g1_stats_snapshot(struct mv88e6xxx_chip *chip, int port);
#endif /* _MV88E6XXX_GLOBAL1_H */
......@@ -283,7 +283,9 @@
#define GLOBAL_CONTROL_2 0x1c
#define GLOBAL_CONTROL_2_NO_CASCADE 0xe000
#define GLOBAL_CONTROL_2_MULTIPLE_CASCADE 0xf000
#define GLOBAL_CONTROL_2_HIST_RX (0x1 << 6)
#define GLOBAL_CONTROL_2_HIST_TX (0x2 << 6)
#define GLOBAL_CONTROL_2_HIST_RX_TX (0x3 << 6)
#define GLOBAL_STATS_OP 0x1d
#define GLOBAL_STATS_OP_BUSY BIT(15)
#define GLOBAL_STATS_OP_NOP (0 << 12)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册