Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  ppc440spe-adma: adds updated ppc440spe adma driver
  iop-adma.c: use resource_size()
  dmaengine: clarify the meaning of the DMA_CTRL_ACK flag
  sh: stylistic improvements for the DMA driver
  dmaengine: fix dmatest to verify minimum transfer length and test buffer size
  sh: DMA driver has to specify its alignment requirements
  Add COH 901 318 DMA block driver v5

Documentation/powerpc/dts-bindings/4xx/ppc440spe-adma.txt

+PPC440SPe DMA/XOR (DMA Controller and XOR Accelerator)
+
+Device nodes needed for operation of the ppc440spe-adma driver
+are specified hereby. These are I2O/DMA, DMA and XOR nodes
+for DMA engines and Memory Queue Module node. The latter is used
+by ADMA driver for configuration of RAID-6 H/W capabilities of
+the PPC440SPe. In addition to the nodes and properties described
+below, the ranges property of PLB node must specify ranges for
+DMA devices.
+
+ i) The I2O node
+
+ Required properties:
+
+ - compatible		: "ibm,i2o-440spe";
+ - reg			: <registers mapping>
+ - dcr-reg		: <DCR registers range>
+
+ Example:
+
+	I2O: i2o@400100000 {
+		compatible = "ibm,i2o-440spe";
+		reg = <0x00000004 0x00100000 0x100>;
+		dcr-reg = <0x060 0x020>;
+	};
+
+
+ ii) The DMA node
+
+ Required properties:
+
+ - compatible		: "ibm,dma-440spe";
+ - cell-index		: 1 cell, hardware index of the DMA engine
+			  (typically 0x0 and 0x1 for DMA0 and DMA1)
+ - reg			: <registers mapping>
+ - dcr-reg		: <DCR registers range>
+ - interrupts		: <interrupt mapping for DMA0/1 interrupts sources:
+			   2 sources: DMAx CS FIFO Needs Service IRQ (on UIC0)
+			   and DMA Error IRQ (on UIC1). The latter is common
+			   for both DMA engines>.
+ - interrupt-parent	: needed for interrupt mapping
+
+ Example:
+
+	DMA0: dma0@400100100 {
+		compatible = "ibm,dma-440spe";
+		cell-index = <0>;
+		reg = <0x00000004 0x00100100 0x100>;
+		dcr-reg = <0x060 0x020>;
+		interrupt-parent = <&DMA0>;
+		interrupts = <0 1>;
+		#interrupt-cells = <1>;
+		#address-cells = <0>;
+		#size-cells = <0>;
+		interrupt-map = <
+			0 &UIC0 0x14 4
+			1 &UIC1 0x16 4>;
+	};
+
+
+ iii) XOR Accelerator node
+
+ Required properties:
+
+ - compatible		: "amcc,xor-accelerator";
+ - reg			: <registers mapping>
+ - interrupts		: <interrupt mapping for XOR interrupt source>
+ - interrupt-parent	: for interrupt mapping
+
+ Example:
+
+	xor-accel@400200000 {
+		compatible = "amcc,xor-accelerator";
+		reg = <0x00000004 0x00200000 0x400>;
+		interrupt-parent = <&UIC1>;
+		interrupts = <0x1f 4>;
+	};
+
+
+ iv) Memory Queue Module node
+
+ Required properties:
+
+ - compatible		: "ibm,mq-440spe";
+ - dcr-reg		: <DCR registers range>
+
+ Example:
+
+	MQ0: mq {
+		compatible = "ibm,mq-440spe";
+		dcr-reg = <0x040 0x020>;
+	};
+

arch/arm/mach-u300/include/mach/coh901318.h

+/*
+ *
+ * include/linux/coh901318.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * DMA driver for COH 901 318
+ * Author: Per Friden <per.friden@stericsson.com>
+ */
+
+#ifndef COH901318_H
+#define COH901318_H
+
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+
+#define MAX_DMA_PACKET_SIZE_SHIFT 11
+#define MAX_DMA_PACKET_SIZE (1 << MAX_DMA_PACKET_SIZE_SHIFT)
+
+/**
+ * struct coh901318_lli - linked list item for DMAC
+ * @control: control settings for DMAC
+ * @src_addr: transfer source address
+ * @dst_addr: transfer destination address
+ * @link_addr:  physical address to next lli
+ * @virt_link_addr: virtual addres of next lli (only used by pool_free)
+ * @phy_this: physical address of current lli (only used by pool_free)
+ */
+struct coh901318_lli {
+	u32 control;
+	dma_addr_t src_addr;
+	dma_addr_t dst_addr;
+	dma_addr_t link_addr;
+
+	void *virt_link_addr;
+	dma_addr_t phy_this;
+};
+/**
+ * struct coh901318_params - parameters for DMAC configuration
+ * @config: DMA config register
+ * @ctrl_lli_last: DMA control register for the last lli in the list
+ * @ctrl_lli: DMA control register for an lli
+ * @ctrl_lli_chained: DMA control register for a chained lli
+ */
+struct coh901318_params {
+	u32 config;
+	u32 ctrl_lli_last;
+	u32 ctrl_lli;
+	u32 ctrl_lli_chained;
+};
+/**
+ * struct coh_dma_channel - dma channel base
+ * @name: ascii name of dma channel
+ * @number: channel id number
+ * @desc_nbr_max: number of preallocated descriptortors
+ * @priority_high: prio of channel, 0 low otherwise high.
+ * @param: configuration parameters
+ * @dev_addr: physical address of periphal connected to channel
+ */
+struct coh_dma_channel {
+	const char name[32];
+	const int number;
+	const int desc_nbr_max;
+	const int priority_high;
+	const struct coh901318_params param;
+	const dma_addr_t dev_addr;
+};
+
+/**
+ * dma_access_memory_state_t - register dma for memory access
+ *
+ * @dev: The dma device
+ * @active:  1 means dma intends to access memory
+ *           0 means dma wont access memory
+ */
+typedef void (*dma_access_memory_state_t)(struct device *dev,
+					  bool active);
+
+/**
+ * struct powersave - DMA power save structure
+ * @lock: lock protecting data in this struct
+ * @started_channels: bit mask indicating active dma channels
+ */
+struct powersave {
+	spinlock_t lock;
+	u64 started_channels;
+};
+/**
+ * struct coh901318_platform - platform arch structure
+ * @chans_slave: specifying dma slave channels
+ * @chans_memcpy: specifying dma memcpy channels
+ * @access_memory_state: requesting DMA memeory access (on / off)
+ * @chan_conf: dma channel configurations
+ * @max_channels: max number of dma chanenls
+ */
+struct coh901318_platform {
+	const int *chans_slave;
+	const int *chans_memcpy;
+	const dma_access_memory_state_t access_memory_state;
+	const struct coh_dma_channel *chan_conf;
+	const int max_channels;
+};
+
+/**
+ * coh901318_get_bytes_left() - Get number of bytes left on a current transfer
+ * @chan: dma channel handle
+ * return number of bytes left, or negative on error
+ */
+u32 coh901318_get_bytes_left(struct dma_chan *chan);
+
+/**
+ * coh901318_stop() - Stops dma transfer
+ * @chan: dma channel handle
+ * return 0 on success otherwise negative value
+ */
+void coh901318_stop(struct dma_chan *chan);
+
+/**
+ * coh901318_continue() - Resumes a stopped dma transfer
+ * @chan: dma channel handle
+ * return 0 on success otherwise negative value
+ */
+void coh901318_continue(struct dma_chan *chan);
+
+/**
+ * coh901318_filter_id() - DMA channel filter function
+ * @chan: dma channel handle
+ * @chan_id: id of dma channel to be filter out
+ *
+ * In dma_request_channel() it specifies what channel id to be requested
+ */
+bool coh901318_filter_id(struct dma_chan *chan, void *chan_id);
+
+/*
+ * DMA Controller - this access the static mappings of the coh901318 dma.
+ *
+ */
+
+#define COH901318_MOD32_MASK					(0x1F)
+#define COH901318_WORD_MASK					(0xFFFFFFFF)
+/* INT_STATUS - Interrupt Status Registers 32bit (R/-) */
+#define COH901318_INT_STATUS1					(0x0000)
+#define COH901318_INT_STATUS2					(0x0004)
+/* TC_INT_STATUS - Terminal Count Interrupt Status Registers 32bit (R/-) */
+#define COH901318_TC_INT_STATUS1				(0x0008)
+#define COH901318_TC_INT_STATUS2				(0x000C)
+/* TC_INT_CLEAR - Terminal Count Interrupt Clear Registers 32bit (-/W) */
+#define COH901318_TC_INT_CLEAR1					(0x0010)
+#define COH901318_TC_INT_CLEAR2					(0x0014)
+/* RAW_TC_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
+#define COH901318_RAW_TC_INT_STATUS1				(0x0018)
+#define COH901318_RAW_TC_INT_STATUS2				(0x001C)
+/* BE_INT_STATUS - Bus Error Interrupt Status Registers 32bit (R/-) */
+#define COH901318_BE_INT_STATUS1				(0x0020)
+#define COH901318_BE_INT_STATUS2				(0x0024)
+/* BE_INT_CLEAR - Bus Error Interrupt Clear Registers 32bit (-/W) */
+#define COH901318_BE_INT_CLEAR1					(0x0028)
+#define COH901318_BE_INT_CLEAR2					(0x002C)
+/* RAW_BE_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
+#define COH901318_RAW_BE_INT_STATUS1				(0x0030)
+#define COH901318_RAW_BE_INT_STATUS2				(0x0034)
+
+/*
+ * CX_CFG - Channel Configuration Registers 32bit (R/W)
+ */
+#define COH901318_CX_CFG					(0x0100)
+#define COH901318_CX_CFG_SPACING				(0x04)
+/* Channel enable activates tha dma job */
+#define COH901318_CX_CFG_CH_ENABLE				(0x00000001)
+#define COH901318_CX_CFG_CH_DISABLE				(0x00000000)
+/* Request Mode */
+#define COH901318_CX_CFG_RM_MASK				(0x00000006)
+#define COH901318_CX_CFG_RM_MEMORY_TO_MEMORY			(0x0 << 1)
+#define COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY			(0x1 << 1)
+#define COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY			(0x1 << 1)
+#define COH901318_CX_CFG_RM_PRIMARY_TO_SECONDARY		(0x3 << 1)
+#define COH901318_CX_CFG_RM_SECONDARY_TO_PRIMARY		(0x3 << 1)
+/* Linked channel request field. RM must == 11 */
+#define COH901318_CX_CFG_LCRF_SHIFT				3
+#define COH901318_CX_CFG_LCRF_MASK				(0x000001F8)
+#define COH901318_CX_CFG_LCR_DISABLE				(0x00000000)
+/* Terminal Counter Interrupt Request Mask */
+#define COH901318_CX_CFG_TC_IRQ_ENABLE				(0x00000200)
+#define COH901318_CX_CFG_TC_IRQ_DISABLE				(0x00000000)
+/* Bus Error interrupt Mask */
+#define COH901318_CX_CFG_BE_IRQ_ENABLE				(0x00000400)
+#define COH901318_CX_CFG_BE_IRQ_DISABLE				(0x00000000)
+
+/*
+ * CX_STAT - Channel Status Registers 32bit (R/-)
+ */
+#define COH901318_CX_STAT					(0x0200)
+#define COH901318_CX_STAT_SPACING				(0x04)
+#define COH901318_CX_STAT_RBE_IRQ_IND				(0x00000008)
+#define COH901318_CX_STAT_RTC_IRQ_IND				(0x00000004)
+#define COH901318_CX_STAT_ACTIVE				(0x00000002)
+#define COH901318_CX_STAT_ENABLED				(0x00000001)
+
+/*
+ * CX_CTRL - Channel Control Registers 32bit (R/W)
+ */
+#define COH901318_CX_CTRL					(0x0400)
+#define COH901318_CX_CTRL_SPACING				(0x10)
+/* Transfer Count Enable */
+#define COH901318_CX_CTRL_TC_ENABLE				(0x00001000)
+#define COH901318_CX_CTRL_TC_DISABLE				(0x00000000)
+/* Transfer Count Value 0 - 4095 */
+#define COH901318_CX_CTRL_TC_VALUE_MASK				(0x00000FFF)
+/* Burst count */
+#define COH901318_CX_CTRL_BURST_COUNT_MASK			(0x0000E000)
+#define COH901318_CX_CTRL_BURST_COUNT_64_BYTES			(0x7 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_48_BYTES			(0x6 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_32_BYTES			(0x5 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_16_BYTES			(0x4 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_8_BYTES			(0x3 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_4_BYTES			(0x2 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_2_BYTES			(0x1 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_1_BYTE			(0x0 << 13)
+/* Source bus size  */
+#define COH901318_CX_CTRL_SRC_BUS_SIZE_MASK			(0x00030000)
+#define COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS			(0x2 << 16)
+#define COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS			(0x1 << 16)
+#define COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS			(0x0 << 16)
+/* Source address increment */
+#define COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE			(0x00040000)
+#define COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE			(0x00000000)
+/* Destination Bus Size */
+#define COH901318_CX_CTRL_DST_BUS_SIZE_MASK			(0x00180000)
+#define COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS			(0x2 << 19)
+#define COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS			(0x1 << 19)
+#define COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS			(0x0 << 19)
+/* Destination address increment */
+#define COH901318_CX_CTRL_DST_ADDR_INC_ENABLE			(0x00200000)
+#define COH901318_CX_CTRL_DST_ADDR_INC_DISABLE			(0x00000000)
+/* Master Mode (Master2 is only connected to MSL) */
+#define COH901318_CX_CTRL_MASTER_MODE_MASK			(0x00C00000)
+#define COH901318_CX_CTRL_MASTER_MODE_M2R_M1W			(0x3 << 22)
+#define COH901318_CX_CTRL_MASTER_MODE_M1R_M2W			(0x2 << 22)
+#define COH901318_CX_CTRL_MASTER_MODE_M2RW			(0x1 << 22)
+#define COH901318_CX_CTRL_MASTER_MODE_M1RW			(0x0 << 22)
+/* Terminal Count flag to PER enable */
+#define COH901318_CX_CTRL_TCP_ENABLE				(0x01000000)
+#define COH901318_CX_CTRL_TCP_DISABLE				(0x00000000)
+/* Terminal Count flags to CPU enable */
+#define COH901318_CX_CTRL_TC_IRQ_ENABLE				(0x02000000)
+#define COH901318_CX_CTRL_TC_IRQ_DISABLE			(0x00000000)
+/* Hand shake to peripheral */
+#define COH901318_CX_CTRL_HSP_ENABLE				(0x04000000)
+#define COH901318_CX_CTRL_HSP_DISABLE				(0x00000000)
+#define COH901318_CX_CTRL_HSS_ENABLE				(0x08000000)
+#define COH901318_CX_CTRL_HSS_DISABLE				(0x00000000)
+/* DMA mode */
+#define COH901318_CX_CTRL_DDMA_MASK				(0x30000000)
+#define COH901318_CX_CTRL_DDMA_LEGACY				(0x0 << 28)
+#define COH901318_CX_CTRL_DDMA_DEMAND_DMA1			(0x1 << 28)
+#define COH901318_CX_CTRL_DDMA_DEMAND_DMA2			(0x2 << 28)
+/* Primary Request Data Destination */
+#define COH901318_CX_CTRL_PRDD_MASK				(0x40000000)
+#define COH901318_CX_CTRL_PRDD_DEST				(0x1 << 30)
+#define COH901318_CX_CTRL_PRDD_SOURCE				(0x0 << 30)
+
+/*
+ * CX_SRC_ADDR - Channel Source Address Registers 32bit (R/W)
+ */
+#define COH901318_CX_SRC_ADDR					(0x0404)
+#define COH901318_CX_SRC_ADDR_SPACING				(0x10)
+
+/*
+ * CX_DST_ADDR - Channel Destination Address Registers 32bit R/W
+ */
+#define COH901318_CX_DST_ADDR					(0x0408)
+#define COH901318_CX_DST_ADDR_SPACING				(0x10)
+
+/*
+ * CX_LNK_ADDR - Channel Link Address Registers 32bit (R/W)
+ */
+#define COH901318_CX_LNK_ADDR					(0x040C)
+#define COH901318_CX_LNK_ADDR_SPACING				(0x10)
+#define COH901318_CX_LNK_LINK_IMMEDIATE				(0x00000001)
+#endif /* COH901318_H */

arch/powerpc/include/asm/async_tx.h

+/*
+ * Copyright (C) 2008-2009 DENX Software Engineering.
+ *
+ * Author: Yuri Tikhonov <yur@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc., 59
+ * Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called COPYING.
+ */
+#ifndef _ASM_POWERPC_ASYNC_TX_H_
+#define _ASM_POWERPC_ASYNC_TX_H_
+
+#if defined(CONFIG_440SPe) || defined(CONFIG_440SP)
+extern struct dma_chan *
+ppc440spe_async_tx_find_best_channel(enum dma_transaction_type cap,
+	struct page **dst_lst, int dst_cnt, struct page **src_lst,
+	int src_cnt, size_t src_sz);
+
+#define async_tx_find_channel(dep, cap, dst_lst, dst_cnt, src_lst, \
+			      src_cnt, src_sz) \
+	ppc440spe_async_tx_find_best_channel(cap, dst_lst, dst_cnt, src_lst, \
+					     src_cnt, src_sz)
+#else
+
+#define async_tx_find_channel(dep, type, dst, dst_count, src, src_count, len) \
+	__async_tx_find_channel(dep, type)
+
+struct dma_chan *
+__async_tx_find_channel(struct async_submit_ctl *submit,
+			enum dma_transaction_type tx_type);
+
+#endif
+
+#endif

arch/powerpc/include/asm/dcr-regs.h

@@ -157,4 +157,27 @@
 #define  L2C_SNP_SSR_32G	0x0000f000
 #define  L2C_SNP_ESR		0x00000800
 
+/*
+ * DCR register offsets for 440SP/440SPe I2O/DMA controller.
+ * The base address is configured in the device tree.
+ */
+#define DCRN_I2O0_IBAL		0x006
+#define DCRN_I2O0_IBAH		0x007
+#define I2O_REG_ENABLE		0x00000001	/* Enable I2O/DMA access */
+
+/* 440SP/440SPe Software Reset DCR */
+#define DCRN_SDR0_SRST		0x0200
+#define DCRN_SDR0_SRST_I2ODMA	(0x80000000 >> 15)	/* Reset I2O/DMA */
+
+/* 440SP/440SPe Memory Queue DCR offsets */
+#define DCRN_MQ0_XORBA		0x04
+#define DCRN_MQ0_CF2H		0x06
+#define DCRN_MQ0_CFBHL		0x0f
+#define DCRN_MQ0_BAUH		0x10
+
+/* HB/LL Paths Configuration Register */
+#define MQ0_CFBHL_TPLM		28
+#define MQ0_CFBHL_HBCL		23
+#define MQ0_CFBHL_POLY		15
+
 #endif /* __DCR_REGS_H__ */

drivers/dma/Kconfig

@@ -111,6 +111,24 @@ config SH_DMAE
 	help
 	  Enable support for the Renesas SuperH DMA controllers.
 
+config COH901318
+	bool "ST-Ericsson COH901318 DMA support"
+	select DMA_ENGINE
+	depends on ARCH_U300
+	help
+	  Enable support for ST-Ericsson COH 901 318 DMA.
+
+config AMCC_PPC440SPE_ADMA
+	tristate "AMCC PPC440SPe ADMA support"
+	depends on 440SPe || 440SP
+	select DMA_ENGINE
+	select ARCH_HAS_ASYNC_TX_FIND_CHANNEL
+	help
+	  Enable support for the AMCC PPC440SPe RAID engines.
+
+config ARCH_HAS_ASYNC_TX_FIND_CHANNEL
+	bool
+
 config DMA_ENGINE
 	bool
 

drivers/dma/Makefile

@@ -10,3 +10,5 @@ obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
 obj-$(CONFIG_MX3_IPU) += ipu/
 obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
 obj-$(CONFIG_SH_DMAE) += shdma.o
+obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o
+obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += ppc4xx/

drivers/dma/coh901318_lli.c

+/*
+ * driver/dma/coh901318_lli.c
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Support functions for handling lli for dma
+ * Author: Per Friden <per.friden@stericsson.com>
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/spinlock.h>
+#include <linux/dmapool.h>
+#include <linux/memory.h>
+#include <mach/coh901318.h>
+
+#include "coh901318_lli.h"
+
+#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
+#define DEBUGFS_POOL_COUNTER_RESET(pool) (pool->debugfs_pool_counter = 0)
+#define DEBUGFS_POOL_COUNTER_ADD(pool, add) (pool->debugfs_pool_counter += add)
+#else
+#define DEBUGFS_POOL_COUNTER_RESET(pool)
+#define DEBUGFS_POOL_COUNTER_ADD(pool, add)
+#endif
+
+static struct coh901318_lli *
+coh901318_lli_next(struct coh901318_lli *data)
+{
+	if (data == NULL || data->link_addr == 0)
+		return NULL;
+
+	return (struct coh901318_lli *) data->virt_link_addr;
+}
+
+int coh901318_pool_create(struct coh901318_pool *pool,
+			  struct device *dev,
+			  size_t size, size_t align)
+{
+	spin_lock_init(&pool->lock);
+	pool->dev = dev;
+	pool->dmapool = dma_pool_create("lli_pool", dev, size, align, 0);
+
+	DEBUGFS_POOL_COUNTER_RESET(pool);
+	return 0;
+}
+
+int coh901318_pool_destroy(struct coh901318_pool *pool)
+{
+
+	dma_pool_destroy(pool->dmapool);
+	return 0;
+}
+
+struct coh901318_lli *
+coh901318_lli_alloc(struct coh901318_pool *pool, unsigned int len)
+{
+	int i;
+	struct coh901318_lli *head;
+	struct coh901318_lli *lli;
+	struct coh901318_lli *lli_prev;
+	dma_addr_t phy;
+
+	if (len == 0)
+		goto err;
+
+	spin_lock(&pool->lock);
+
+	head = dma_pool_alloc(pool->dmapool, GFP_NOWAIT, &phy);
+
+	if (head == NULL)
+		goto err;
+
+	DEBUGFS_POOL_COUNTER_ADD(pool, 1);
+
+	lli = head;
+	lli->phy_this = phy;
+
+	for (i = 1; i < len; i++) {
+		lli_prev = lli;
+
+		lli = dma_pool_alloc(pool->dmapool, GFP_NOWAIT, &phy);
+
+		if (lli == NULL)
+			goto err_clean_up;
+
+		DEBUGFS_POOL_COUNTER_ADD(pool, 1);
+		lli->phy_this = phy;
+
+		lli_prev->link_addr = phy;
+		lli_prev->virt_link_addr = lli;
+	}
+
+	lli->link_addr = 0x00000000U;
+
+	spin_unlock(&pool->lock);
+
+	return head;
+
+ err:
+	spin_unlock(&pool->lock);
+	return NULL;
+
+ err_clean_up:
+	lli_prev->link_addr = 0x00000000U;
+	spin_unlock(&pool->lock);
+	coh901318_lli_free(pool, &head);
+	return NULL;
+}
+
+void coh901318_lli_free(struct coh901318_pool *pool,
+			struct coh901318_lli **lli)
+{
+	struct coh901318_lli *l;
+	struct coh901318_lli *next;
+
+	if (lli == NULL)
+		return;
+
+	l = *lli;
+
+	if (l == NULL)
+		return;
+
+	spin_lock(&pool->lock);
+
+	while (l->link_addr) {
+		next = l->virt_link_addr;
+		dma_pool_free(pool->dmapool, l, l->phy_this);
+		DEBUGFS_POOL_COUNTER_ADD(pool, -1);
+		l = next;
+	}
+	dma_pool_free(pool->dmapool, l, l->phy_this);
+	DEBUGFS_POOL_COUNTER_ADD(pool, -1);
+
+	spin_unlock(&pool->lock);
+	*lli = NULL;
+}
+
+int
+coh901318_lli_fill_memcpy(struct coh901318_pool *pool,
+			  struct coh901318_lli *lli,
+			  dma_addr_t source, unsigned int size,
+			  dma_addr_t destination, u32 ctrl_chained,
+			  u32 ctrl_eom)
+{
+	int s = size;
+	dma_addr_t src = source;
+	dma_addr_t dst = destination;
+
+	lli->src_addr = src;
+	lli->dst_addr = dst;
+
+	while (lli->link_addr) {
+		lli->control = ctrl_chained | MAX_DMA_PACKET_SIZE;
+		lli->src_addr = src;
+		lli->dst_addr = dst;
+
+		s -= MAX_DMA_PACKET_SIZE;
+		lli = coh901318_lli_next(lli);
+
+		src += MAX_DMA_PACKET_SIZE;
+		dst += MAX_DMA_PACKET_SIZE;
+	}
+
+	lli->control = ctrl_eom | s;
+	lli->src_addr = src;
+	lli->dst_addr = dst;
+
+	/* One irq per single transfer */
+	return 1;
+}
+
+int
+coh901318_lli_fill_single(struct coh901318_pool *pool,
+			  struct coh901318_lli *lli,
+			  dma_addr_t buf, unsigned int size,
+			  dma_addr_t dev_addr, u32 ctrl_chained, u32 ctrl_eom,
+			  enum dma_data_direction dir)
+{
+	int s = size;
+	dma_addr_t src;
+	dma_addr_t dst;
+
+
+	if (dir == DMA_TO_DEVICE) {
+		src = buf;
+		dst = dev_addr;
+
+	} else if (dir == DMA_FROM_DEVICE) {
+
+		src = dev_addr;
+		dst = buf;
+	} else {
+		return -EINVAL;
+	}
+
+	while (lli->link_addr) {
+		size_t block_size = MAX_DMA_PACKET_SIZE;
+		lli->control = ctrl_chained | MAX_DMA_PACKET_SIZE;
+
+		/* If we are on the next-to-final block and there will
+		 * be less than half a DMA packet left for the last
+		 * block, then we want to make this block a little
+		 * smaller to balance the sizes. This is meant to
+		 * avoid too small transfers if the buffer size is
+		 * (MAX_DMA_PACKET_SIZE*N + 1) */
+		if (s < (MAX_DMA_PACKET_SIZE + MAX_DMA_PACKET_SIZE/2))
+			block_size = MAX_DMA_PACKET_SIZE/2;
+
+		s -= block_size;
+		lli->src_addr = src;
+		lli->dst_addr = dst;
+
+		lli = coh901318_lli_next(lli);
+
+		if (dir == DMA_TO_DEVICE)
+			src += block_size;
+		else if (dir == DMA_FROM_DEVICE)
+			dst += block_size;
+	}
+
+	lli->control = ctrl_eom | s;
+	lli->src_addr = src;
+	lli->dst_addr = dst;
+
+	/* One irq per single transfer */
+	return 1;
+}
+
+int
+coh901318_lli_fill_sg(struct coh901318_pool *pool,
+		      struct coh901318_lli *lli,
+		      struct scatterlist *sgl, unsigned int nents,
+		      dma_addr_t dev_addr, u32 ctrl_chained, u32 ctrl,
+		      u32 ctrl_last,
+		      enum dma_data_direction dir, u32 ctrl_irq_mask)
+{
+	int i;
+	struct scatterlist *sg;
+	u32 ctrl_sg;
+	dma_addr_t src = 0;
+	dma_addr_t dst = 0;
+	int nbr_of_irq = 0;
+	u32 bytes_to_transfer;
+	u32 elem_size;
+
+	if (lli == NULL)
+		goto err;
+
+	spin_lock(&pool->lock);
+
+	if (dir == DMA_TO_DEVICE)
+		dst = dev_addr;
+	else if (dir == DMA_FROM_DEVICE)
+		src = dev_addr;
+	else
+		goto err;
+
+	for_each_sg(sgl, sg, nents, i) {
+		if (sg_is_chain(sg)) {
+			/* sg continues to the next sg-element don't
+			 * send ctrl_finish until the last
+			 * sg-element in the chain
+			 */
+			ctrl_sg = ctrl_chained;
+		} else if (i == nents - 1)
+			ctrl_sg = ctrl_last;
+		else
+			ctrl_sg = ctrl ? ctrl : ctrl_last;
+
+
+		if ((ctrl_sg & ctrl_irq_mask))
+			nbr_of_irq++;
+
+		if (dir == DMA_TO_DEVICE)
+			/* increment source address */
+			src = sg_dma_address(sg);
+		else
+			/* increment destination address */
+			dst =  sg_dma_address(sg);
+
+		bytes_to_transfer = sg_dma_len(sg);
+
+		while (bytes_to_transfer) {
+			u32 val;
+
+			if (bytes_to_transfer > MAX_DMA_PACKET_SIZE) {
+				elem_size = MAX_DMA_PACKET_SIZE;
+				val = ctrl_chained;
+			} else {
+				elem_size = bytes_to_transfer;
+				val = ctrl_sg;
+			}
+
+			lli->control = val | elem_size;
+			lli->src_addr = src;
+			lli->dst_addr = dst;
+
+			if (dir == DMA_FROM_DEVICE)
+				dst += elem_size;
+			else
+				src += elem_size;
+
+			BUG_ON(lli->link_addr & 3);
+
+			bytes_to_transfer -= elem_size;
+			lli = coh901318_lli_next(lli);
+		}
+
+	}
+	spin_unlock(&pool->lock);
+
+	/* There can be many IRQs per sg transfer */
+	return nbr_of_irq;
+ err:
+	spin_unlock(&pool->lock);
+	return -EINVAL;
+}

drivers/dma/coh901318_lli.h

+/*
+ * driver/dma/coh901318_lli.h
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Support functions for handling lli for coh901318
+ * Author: Per Friden <per.friden@stericsson.com>
+ */
+
+#ifndef COH901318_LLI_H
+#define COH901318_LLI_H
+
+#include <mach/coh901318.h>
+
+struct device;
+
+struct coh901318_pool {
+	spinlock_t lock;
+	struct dma_pool *dmapool;
+	struct device *dev;
+
+#ifdef CONFIG_DEBUG_FS
+	int debugfs_pool_counter;
+#endif
+};
+
+struct device;
+/**
+ * coh901318_pool_create() - Creates an dma pool for lli:s
+ * @pool: pool handle
+ * @dev: dma device
+ * @lli_nbr: number of lli:s in the pool
+ * @algin: adress alignemtn of lli:s
+ * returns 0 on success otherwise none zero
+ */
+int coh901318_pool_create(struct coh901318_pool *pool,
+			  struct device *dev,
+			  size_t lli_nbr, size_t align);
+
+/**
+ * coh901318_pool_destroy() - Destroys the dma pool
+ * @pool: pool handle
+ * returns 0 on success otherwise none zero
+ */
+int coh901318_pool_destroy(struct coh901318_pool *pool);
+
+/**
+ * coh901318_lli_alloc() - Allocates a linked list
+ *
+ * @pool: pool handle
+ * @len: length to list
+ * return: none NULL if success otherwise NULL
+ */
+struct coh901318_lli *
+coh901318_lli_alloc(struct coh901318_pool *pool,
+		    unsigned int len);
+
+/**
+ * coh901318_lli_free() - Returns the linked list items to the pool
+ * @pool: pool handle
+ * @lli: reference to lli pointer to be freed
+ */
+void coh901318_lli_free(struct coh901318_pool *pool,
+			struct coh901318_lli **lli);
+
+/**
+ * coh901318_lli_fill_memcpy() - Prepares the lli:s for dma memcpy
+ * @pool: pool handle
+ * @lli: allocated lli
+ * @src: src address
+ * @size: transfer size
+ * @dst: destination address
+ * @ctrl_chained: ctrl for chained lli
+ * @ctrl_last: ctrl for the last lli
+ * returns number of CPU interrupts for the lli, negative on error.
+ */
+int
+coh901318_lli_fill_memcpy(struct coh901318_pool *pool,
+			  struct coh901318_lli *lli,
+			  dma_addr_t src, unsigned int size,
+			  dma_addr_t dst, u32 ctrl_chained, u32 ctrl_last);
+
+/**
+ * coh901318_lli_fill_single() - Prepares the lli:s for dma single transfer
+ * @pool: pool handle
+ * @lli: allocated lli
+ * @buf: transfer buffer
+ * @size: transfer size
+ * @dev_addr: address of periphal
+ * @ctrl_chained: ctrl for chained lli
+ * @ctrl_last: ctrl for the last lli
+ * @dir: direction of transfer (to or from device)
+ * returns number of CPU interrupts for the lli, negative on error.
+ */
+int
+coh901318_lli_fill_single(struct coh901318_pool *pool,
+			  struct coh901318_lli *lli,
+			  dma_addr_t buf, unsigned int size,
+			  dma_addr_t dev_addr, u32 ctrl_chained, u32 ctrl_last,
+			  enum dma_data_direction dir);
+
+/**
+ * coh901318_lli_fill_single() - Prepares the lli:s for dma scatter list transfer
+ * @pool: pool handle
+ * @lli: allocated lli
+ * @sg: scatter gather list
+ * @nents: number of entries in sg
+ * @dev_addr: address of periphal
+ * @ctrl_chained: ctrl for chained lli
+ * @ctrl: ctrl of middle lli
+ * @ctrl_last: ctrl for the last lli
+ * @dir: direction of transfer (to or from device)
+ * @ctrl_irq_mask: ctrl mask for CPU interrupt
+ * returns number of CPU interrupts for the lli, negative on error.
+ */
+int
+coh901318_lli_fill_sg(struct coh901318_pool *pool,
+		      struct coh901318_lli *lli,
+		      struct scatterlist *sg, unsigned int nents,
+		      dma_addr_t dev_addr, u32 ctrl_chained,
+		      u32 ctrl, u32 ctrl_last,
+		      enum dma_data_direction dir, u32 ctrl_irq_mask);
+
+#endif /* COH901318_LLI_H */

drivers/dma/dmatest.c

@@ -298,10 +298,6 @@ static int dmatest_func(void *data)
 
 		total_tests++;
 
-		len = dmatest_random() % test_buf_size + 1;
-		src_off = dmatest_random() % (test_buf_size - len + 1);
-		dst_off = dmatest_random() % (test_buf_size - len + 1);
-
 		/* honor alignment restrictions */
 		if (thread->type == DMA_MEMCPY)
 			align = dev->copy_align;
@@ -310,7 +306,19 @@ static int dmatest_func(void *data)
 		else if (thread->type == DMA_PQ)
 			align = dev->pq_align;
 
+		if (1 << align > test_buf_size) {
+			pr_err("%u-byte buffer too small for %d-byte alignment\n",
+			       test_buf_size, 1 << align);
+			break;
+		}
+
+		len = dmatest_random() % test_buf_size + 1;
 		len = (len >> align) << align;
+		if (!len)
+			len = 1 << align;
+		src_off = dmatest_random() % (test_buf_size - len + 1);
+		dst_off = dmatest_random() % (test_buf_size - len + 1);
+
 		src_off = (src_off >> align) << align;
 		dst_off = (dst_off >> align) << align;
 

drivers/dma/iop-adma.c

@@ -1470,7 +1470,7 @@ static int __devinit iop_adma_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	if (!devm_request_mem_region(&pdev->dev, res->start,
-				res->end - res->start, pdev->name))
+				resource_size(res), pdev->name))
 		return -EBUSY;
 
 	adev = kzalloc(sizeof(*adev), GFP_KERNEL);
@@ -1542,7 +1542,7 @@ static int __devinit iop_adma_probe(struct platform_device *pdev)
 	iop_chan->device = adev;
 
 	iop_chan->mmr_base = devm_ioremap(&pdev->dev, res->start,
-					res->end - res->start);
+					resource_size(res));
 	if (!iop_chan->mmr_base) {
 		ret = -ENOMEM;
 		goto err_free_iop_chan;

drivers/dma/ppc4xx/Makefile

+obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += adma.o

drivers/dma/ppc4xx/adma.h

+/*
+ * 2006-2009 (C) DENX Software Engineering.
+ *
+ * Author: Yuri Tikhonov <yur@emcraft.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of
+ * any kind, whether express or implied.
+ */
+
+#ifndef _PPC440SPE_ADMA_H
+#define _PPC440SPE_ADMA_H
+
+#include <linux/types.h>
+#include "dma.h"
+#include "xor.h"
+
+#define to_ppc440spe_adma_chan(chan) \
+		container_of(chan, struct ppc440spe_adma_chan, common)
+#define to_ppc440spe_adma_device(dev) \
+		container_of(dev, struct ppc440spe_adma_device, common)
+#define tx_to_ppc440spe_adma_slot(tx) \
+		container_of(tx, struct ppc440spe_adma_desc_slot, async_tx)
+
+/* Default polynomial (for 440SP is only available) */
+#define PPC440SPE_DEFAULT_POLY	0x4d
+
+#define PPC440SPE_ADMA_ENGINES_NUM	(XOR_ENGINES_NUM + DMA_ENGINES_NUM)
+
+#define PPC440SPE_ADMA_WATCHDOG_MSEC	3
+#define PPC440SPE_ADMA_THRESHOLD	1
+
+#define PPC440SPE_DMA0_ID	0
+#define PPC440SPE_DMA1_ID	1
+#define PPC440SPE_XOR_ID	2
+
+#define PPC440SPE_ADMA_DMA_MAX_BYTE_COUNT	0xFFFFFFUL
+/* this is the XOR_CBBCR width */
+#define PPC440SPE_ADMA_XOR_MAX_BYTE_COUNT	(1 << 31)
+#define PPC440SPE_ADMA_ZERO_SUM_MAX_BYTE_COUNT PPC440SPE_ADMA_XOR_MAX_BYTE_COUNT
+
+#define PPC440SPE_RXOR_RUN	0
+
+#define MQ0_CF2H_RXOR_BS_MASK	0x1FF
+
+#undef ADMA_LL_DEBUG
+
+/**
+ * struct ppc440spe_adma_device - internal representation of an ADMA device
+ * @dev: device
+ * @dma_reg: base for DMAx register access
+ * @xor_reg: base for XOR register access
+ * @i2o_reg: base for I2O register access
+ * @id: HW ADMA Device selector
+ * @dma_desc_pool_virt: base of DMA descriptor region (CPU address)
+ * @dma_desc_pool: base of DMA descriptor region (DMA address)
+ * @pool_size: size of the pool
+ * @irq: DMAx or XOR irq number
+ * @err_irq: DMAx error irq number
+ * @common: embedded struct dma_device
+ */
+struct ppc440spe_adma_device {
+	struct device *dev;
+	struct dma_regs __iomem *dma_reg;
+	struct xor_regs __iomem *xor_reg;
+	struct i2o_regs __iomem *i2o_reg;
+	int id;
+	void *dma_desc_pool_virt;
+	dma_addr_t dma_desc_pool;
+	size_t pool_size;
+	int irq;
+	int err_irq;
+	struct dma_device common;
+};
+
+/**
+ * struct ppc440spe_adma_chan - internal representation of an ADMA channel
+ * @lock: serializes enqueue/dequeue operations to the slot pool
+ * @device: parent device
+ * @chain: device chain view of the descriptors
+ * @common: common dmaengine channel object members
+ * @all_slots: complete domain of slots usable by the channel
+ * @pending: allows batching of hardware operations
+ * @completed_cookie: identifier for the most recently completed operation
+ * @slots_allocated: records the actual size of the descriptor slot pool
+ * @hw_chain_inited: h/w descriptor chain initialization flag
+ * @irq_tasklet: bottom half where ppc440spe_adma_slot_cleanup runs
+ * @needs_unmap: if buffers should not be unmapped upon final processing
+ * @pdest_page: P destination page for async validate operation
+ * @qdest_page: Q destination page for async validate operation
+ * @pdest: P dma addr for async validate operation
+ * @qdest: Q dma addr for async validate operation
+ */
+struct ppc440spe_adma_chan {
+	spinlock_t lock;
+	struct ppc440spe_adma_device *device;
+	struct list_head chain;
+	struct dma_chan common;
+	struct list_head all_slots;
+	struct ppc440spe_adma_desc_slot *last_used;
+	int pending;
+	dma_cookie_t completed_cookie;
+	int slots_allocated;
+	int hw_chain_inited;
+	struct tasklet_struct irq_tasklet;
+	u8 needs_unmap;
+	struct page *pdest_page;
+	struct page *qdest_page;
+	dma_addr_t pdest;
+	dma_addr_t qdest;
+};
+
+struct ppc440spe_rxor {
+	u32 addrl;
+	u32 addrh;
+	int len;
+	int xor_count;
+	int addr_count;
+	int desc_count;
+	int state;
+};
+
+/**
+ * struct ppc440spe_adma_desc_slot - PPC440SPE-ADMA software descriptor
+ * @phys: hardware address of the hardware descriptor chain
+ * @group_head: first operation in a transaction
+ * @hw_next: pointer to the next descriptor in chain
+ * @async_tx: support for the async_tx api
+ * @slot_node: node on the iop_adma_chan.all_slots list
+ * @chain_node: node on the op_adma_chan.chain list
+ * @group_list: list of slots that make up a multi-descriptor transaction
+ *              for example transfer lengths larger than the supported hw max
+ * @unmap_len: transaction bytecount
+ * @hw_desc: virtual address of the hardware descriptor chain
+ * @stride: currently chained or not
+ * @idx: pool index
+ * @slot_cnt: total slots used in an transaction (group of operations)
+ * @src_cnt: number of sources set in this descriptor
+ * @dst_cnt: number of destinations set in the descriptor
+ * @slots_per_op: number of slots per operation
+ * @descs_per_op: number of slot per P/Q operation see comment
+ *                for ppc440spe_prep_dma_pqxor function
+ * @flags: desc state/type
+ * @reverse_flags: 1 if a corresponding rxor address uses reversed address order
+ * @xor_check_result: result of zero sum
+ * @crc32_result: result crc calculation
+ */
+struct ppc440spe_adma_desc_slot {
+	dma_addr_t phys;
+	struct ppc440spe_adma_desc_slot *group_head;
+	struct ppc440spe_adma_desc_slot *hw_next;
+	struct dma_async_tx_descriptor async_tx;
+	struct list_head slot_node;
+	struct list_head chain_node; /* node in channel ops list */
+	struct list_head group_list; /* list */
+	unsigned int unmap_len;
+	void *hw_desc;
+	u16 stride;
+	u16 idx;
+	u16 slot_cnt;
+	u8 src_cnt;
+	u8 dst_cnt;
+	u8 slots_per_op;
+	u8 descs_per_op;
+	unsigned long flags;
+	unsigned long reverse_flags[8];
+
+#define PPC440SPE_DESC_INT	0	/* generate interrupt on complete */
+#define PPC440SPE_ZERO_P	1	/* clear P destionaion */
+#define PPC440SPE_ZERO_Q	2	/* clear Q destination */
+#define PPC440SPE_COHERENT	3	/* src/dst are coherent */
+
+#define PPC440SPE_DESC_WXOR	4	/* WXORs are in chain */
+#define PPC440SPE_DESC_RXOR	5	/* RXOR is in chain */
+
+#define PPC440SPE_DESC_RXOR123	8	/* CDB for RXOR123 operation */
+#define PPC440SPE_DESC_RXOR124	9	/* CDB for RXOR124 operation */
+#define PPC440SPE_DESC_RXOR125	10	/* CDB for RXOR125 operation */
+#define PPC440SPE_DESC_RXOR12	11	/* CDB for RXOR12 operation */
+#define PPC440SPE_DESC_RXOR_REV	12	/* CDB has srcs in reversed order */
+
+#define PPC440SPE_DESC_PCHECK	13
+#define PPC440SPE_DESC_QCHECK	14
+
+#define PPC440SPE_DESC_RXOR_MSK	0x3
+
+	struct ppc440spe_rxor rxor_cursor;
+
+	union {
+		u32 *xor_check_result;
+		u32 *crc32_result;
+	};
+};
+
+#endif /* _PPC440SPE_ADMA_H */

drivers/dma/ppc4xx/dma.h

+/*
+ * 440SPe's DMA engines support header file
+ *
+ * 2006-2009 (C) DENX Software Engineering.
+ *
+ * Author: Yuri Tikhonov <yur@emcraft.com>
+ *
+ * This file is licensed under the term of  the GNU General Public License
+ * version 2. The program licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef	_PPC440SPE_DMA_H
+#define _PPC440SPE_DMA_H
+
+#include <linux/types.h>
+
+/* Number of elements in the array with statical CDBs */
+#define	MAX_STAT_DMA_CDBS	16
+/* Number of DMA engines available on the contoller */
+#define DMA_ENGINES_NUM		2
+
+/* Maximum h/w supported number of destinations */
+#define DMA_DEST_MAX_NUM	2
+
+/* FIFO's params */
+#define DMA0_FIFO_SIZE		0x1000
+#define DMA1_FIFO_SIZE		0x1000
+#define DMA_FIFO_ENABLE		(1<<12)
+
+/* DMA Configuration Register. Data Transfer Engine PLB Priority: */
+#define DMA_CFG_DXEPR_LP	(0<<26)
+#define DMA_CFG_DXEPR_HP	(3<<26)
+#define DMA_CFG_DXEPR_HHP	(2<<26)
+#define DMA_CFG_DXEPR_HHHP	(1<<26)
+
+/* DMA Configuration Register. DMA FIFO Manager PLB Priority: */
+#define DMA_CFG_DFMPP_LP	(0<<23)
+#define DMA_CFG_DFMPP_HP	(3<<23)
+#define DMA_CFG_DFMPP_HHP	(2<<23)
+#define DMA_CFG_DFMPP_HHHP	(1<<23)
+
+/* DMA Configuration Register. Force 64-byte Alignment */
+#define DMA_CFG_FALGN		(1 << 19)
+
+/*UIC0:*/
+#define D0CPF_INT		(1<<12)
+#define D0CSF_INT		(1<<11)
+#define D1CPF_INT		(1<<10)
+#define D1CSF_INT		(1<<9)
+/*UIC1:*/
+#define DMAE_INT		(1<<9)
+
+/* I2O IOP Interrupt Mask Register */
+#define I2O_IOPIM_P0SNE		(1<<3)
+#define I2O_IOPIM_P0EM		(1<<5)
+#define I2O_IOPIM_P1SNE		(1<<6)
+#define I2O_IOPIM_P1EM		(1<<8)
+
+/* DMA CDB fields */
+#define DMA_CDB_MSK		(0xF)
+#define DMA_CDB_64B_ADDR	(1<<2)
+#define DMA_CDB_NO_INT		(1<<3)
+#define DMA_CDB_STATUS_MSK	(0x3)
+#define DMA_CDB_ADDR_MSK	(0xFFFFFFF0)
+
+/* DMA CDB OpCodes */
+#define DMA_CDB_OPC_NO_OP	(0x00)
+#define DMA_CDB_OPC_MV_SG1_SG2	(0x01)
+#define DMA_CDB_OPC_MULTICAST	(0x05)
+#define DMA_CDB_OPC_DFILL128	(0x24)
+#define DMA_CDB_OPC_DCHECK128	(0x23)
+
+#define DMA_CUED_XOR_BASE	(0x10000000)
+#define DMA_CUED_XOR_HB		(0x00000008)
+
+#ifdef CONFIG_440SP
+#define DMA_CUED_MULT1_OFF	0
+#define DMA_CUED_MULT2_OFF	8
+#define DMA_CUED_MULT3_OFF	16
+#define DMA_CUED_REGION_OFF	24
+#define DMA_CUED_XOR_WIN_MSK	(0xFC000000)
+#else
+#define DMA_CUED_MULT1_OFF	2
+#define DMA_CUED_MULT2_OFF	10
+#define DMA_CUED_MULT3_OFF	18
+#define DMA_CUED_REGION_OFF	26
+#define DMA_CUED_XOR_WIN_MSK	(0xF0000000)
+#endif
+
+#define DMA_CUED_REGION_MSK	0x3
+#define DMA_RXOR123		0x0
+#define DMA_RXOR124		0x1
+#define DMA_RXOR125		0x2
+#define DMA_RXOR12		0x3
+
+/* S/G addresses */
+#define DMA_CDB_SG_SRC		1
+#define DMA_CDB_SG_DST1		2
+#define DMA_CDB_SG_DST2		3
+
+/*
+ * DMAx engines Command Descriptor Block Type
+ */
+struct dma_cdb {
+	/*
+	 * Basic CDB structure (Table 20-17, p.499, 440spe_um_1_22.pdf)
+	 */
+	u8	pad0[2];        /* reserved */
+	u8	attr;		/* attributes */
+	u8	opc;		/* opcode */
+	u32	sg1u;		/* upper SG1 address */
+	u32	sg1l;		/* lower SG1 address */
+	u32	cnt;		/* SG count, 3B used */
+	u32	sg2u;		/* upper SG2 address */
+	u32	sg2l;		/* lower SG2 address */
+	u32	sg3u;		/* upper SG3 address */
+	u32	sg3l;		/* lower SG3 address */
+};
+
+/*
+ * DMAx hardware registers (p.515 in 440SPe UM 1.22)
+ */
+struct dma_regs {
+	u32	cpfpl;
+	u32	cpfph;
+	u32	csfpl;
+	u32	csfph;
+	u32	dsts;
+	u32	cfg;
+	u8	pad0[0x8];
+	u16	cpfhp;
+	u16	cpftp;
+	u16	csfhp;
+	u16	csftp;
+	u8	pad1[0x8];
+	u32	acpl;
+	u32	acph;
+	u32	s1bpl;
+	u32	s1bph;
+	u32	s2bpl;
+	u32	s2bph;
+	u32	s3bpl;
+	u32	s3bph;
+	u8	pad2[0x10];
+	u32	earl;
+	u32	earh;
+	u8	pad3[0x8];
+	u32	seat;
+	u32	sead;
+	u32	op;
+	u32	fsiz;
+};
+
+/*
+ * I2O hardware registers (p.528 in 440SPe UM 1.22)
+ */
+struct i2o_regs {
+	u32	ists;
+	u32	iseat;
+	u32	isead;
+	u8	pad0[0x14];
+	u32	idbel;
+	u8	pad1[0xc];
+	u32	ihis;
+	u32	ihim;
+	u8	pad2[0x8];
+	u32	ihiq;
+	u32	ihoq;
+	u8	pad3[0x8];
+	u32	iopis;
+	u32	iopim;
+	u32	iopiq;
+	u8	iopoq;
+	u8	pad4[3];
+	u16	iiflh;
+	u16	iiflt;
+	u16	iiplh;
+	u16	iiplt;
+	u16	ioflh;
+	u16	ioflt;
+	u16	ioplh;
+	u16	ioplt;
+	u32	iidc;
+	u32	ictl;
+	u32	ifcpp;
+	u8	pad5[0x4];
+	u16	mfac0;
+	u16	mfac1;
+	u16	mfac2;
+	u16	mfac3;
+	u16	mfac4;
+	u16	mfac5;
+	u16	mfac6;
+	u16	mfac7;
+	u16	ifcfh;
+	u16	ifcht;
+	u8	pad6[0x4];
+	u32	iifmc;
+	u32	iodb;
+	u32	iodbc;
+	u32	ifbal;
+	u32	ifbah;
+	u32	ifsiz;
+	u32	ispd0;
+	u32	ispd1;
+	u32	ispd2;
+	u32	ispd3;
+	u32	ihipl;
+	u32	ihiph;
+	u32	ihopl;
+	u32	ihoph;
+	u32	iiipl;
+	u32	iiiph;
+	u32	iiopl;
+	u32	iioph;
+	u32	ifcpl;
+	u32	ifcph;
+	u8	pad7[0x8];
+	u32	iopt;
+};
+
+#endif /* _PPC440SPE_DMA_H */

drivers/dma/ppc4xx/xor.h

+/*
+ * 440SPe's XOR engines support header file
+ *
+ * 2006-2009 (C) DENX Software Engineering.
+ *
+ * Author: Yuri Tikhonov <yur@emcraft.com>
+ *
+ * This file is licensed under the term of  the GNU General Public License
+ * version 2. The program licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef _PPC440SPE_XOR_H
+#define _PPC440SPE_XOR_H
+
+#include <linux/types.h>
+
+/* Number of XOR engines available on the contoller */
+#define XOR_ENGINES_NUM		1
+
+/* Number of operands supported in the h/w */
+#define XOR_MAX_OPS		16
+
+/*
+ * XOR Command Block Control Register bits
+ */
+#define XOR_CBCR_LNK_BIT        (1<<31) /* link present */
+#define XOR_CBCR_TGT_BIT        (1<<30) /* target present */
+#define XOR_CBCR_CBCE_BIT       (1<<29) /* command block compete enable */
+#define XOR_CBCR_RNZE_BIT       (1<<28) /* result not zero enable */
+#define XOR_CBCR_XNOR_BIT       (1<<15) /* XOR/XNOR */
+#define XOR_CDCR_OAC_MSK        (0x7F)  /* operand address count */
+
+/*
+ * XORCore Status Register bits
+ */
+#define XOR_SR_XCP_BIT		(1<<31)	/* core processing */
+#define XOR_SR_ICB_BIT		(1<<17)	/* invalid CB */
+#define XOR_SR_IC_BIT		(1<<16)	/* invalid command */
+#define XOR_SR_IPE_BIT		(1<<15)	/* internal parity error */
+#define XOR_SR_RNZ_BIT		(1<<2)	/* result not Zero */
+#define XOR_SR_CBC_BIT		(1<<1)	/* CB complete */
+#define XOR_SR_CBLC_BIT		(1<<0)	/* CB list complete */
+
+/*
+ * XORCore Control Set and Reset Register bits
+ */
+#define XOR_CRSR_XASR_BIT	(1<<31)	/* soft reset */
+#define XOR_CRSR_XAE_BIT	(1<<30)	/* enable */
+#define XOR_CRSR_RCBE_BIT	(1<<29)	/* refetch CB enable */
+#define XOR_CRSR_PAUS_BIT	(1<<28)	/* pause */
+#define XOR_CRSR_64BA_BIT	(1<<27) /* 64/32 CB format */
+#define XOR_CRSR_CLP_BIT	(1<<25)	/* continue list processing */
+
+/*
+ * XORCore Interrupt Enable Register
+ */
+#define XOR_IE_ICBIE_BIT	(1<<17)	/* Invalid Command Block IRQ Enable */
+#define XOR_IE_ICIE_BIT		(1<<16)	/* Invalid Command IRQ Enable */
+#define XOR_IE_RPTIE_BIT	(1<<14)	/* Read PLB Timeout Error IRQ Enable */
+#define XOR_IE_CBCIE_BIT	(1<<1)	/* CB complete interrupt enable */
+#define XOR_IE_CBLCI_BIT	(1<<0)	/* CB list complete interrupt enable */
+
+/*
+ * XOR Accelerator engine Command Block Type
+ */
+struct xor_cb {
+	/*
+	 * Basic 64-bit format XOR CB (Table 19-1, p.463, 440spe_um_1_22.pdf)
+	 */
+	u32	cbc;		/* control */
+	u32	cbbc;		/* byte count */
+	u32	cbs;		/* status */
+	u8	pad0[4];	/* reserved */
+	u32	cbtah;		/* target address high */
+	u32	cbtal;		/* target address low */
+	u32	cblah;		/* link address high */
+	u32	cblal;		/* link address low */
+	struct {
+		u32 h;
+		u32 l;
+	} __attribute__ ((packed)) ops[16];
+} __attribute__ ((packed));
+
+/*
+ * XOR hardware registers Table 19-3, UM 1.22
+ */
+struct xor_regs {
+	u32	op_ar[16][2];	/* operand address[0]-high,[1]-low registers */
+	u8	pad0[352];	/* reserved */
+	u32	cbcr;		/* CB control register */
+	u32	cbbcr;		/* CB byte count register */
+	u32	cbsr;		/* CB status register */
+	u8	pad1[4];	/* reserved */
+	u32	cbtahr;		/* operand target address high register */
+	u32	cbtalr;		/* operand target address low register */
+	u32	cblahr;		/* CB link address high register */
+	u32	cblalr;		/* CB link address low register */
+	u32	crsr;		/* control set register */
+	u32	crrr;		/* control reset register */
+	u32	ccbahr;		/* current CB address high register */
+	u32	ccbalr;		/* current CB address low register */
+	u32	plbr;		/* PLB configuration register */
+	u32	ier;		/* interrupt enable register */
+	u32	pecr;		/* parity error count register */
+	u32	sr;		/* status register */
+	u32	revidr;		/* revision ID register */
+};
+
+#endif /* _PPC440SPE_XOR_H */

drivers/dma/shdma.c

@@ -80,17 +80,17 @@ static int sh_dmae_rst(int id)
 	unsigned short dmaor;
 
 	sh_dmae_ctl_stop(id);
-	dmaor = (dmaor_read_reg(id)|DMAOR_INIT);
+	dmaor = dmaor_read_reg(id) | DMAOR_INIT;
 
 	dmaor_write_reg(id, dmaor);
-	if ((dmaor_read_reg(id) & (DMAOR_AE | DMAOR_NMIF))) {
+	if (dmaor_read_reg(id) & (DMAOR_AE | DMAOR_NMIF)) {
 		pr_warning(KERN_ERR "dma-sh: Can't initialize DMAOR.\n");
 		return -EINVAL;
 	}
 	return 0;
 }
 
-static int dmae_is_idle(struct sh_dmae_chan *sh_chan)
+static int dmae_is_busy(struct sh_dmae_chan *sh_chan)
 {
 	u32 chcr = sh_dmae_readl(sh_chan, CHCR);
 	if (chcr & CHCR_DE) {
@@ -110,15 +110,14 @@ static void dmae_set_reg(struct sh_dmae_chan *sh_chan, struct sh_dmae_regs hw)
 {
 	sh_dmae_writel(sh_chan, hw.sar, SAR);
 	sh_dmae_writel(sh_chan, hw.dar, DAR);
-	sh_dmae_writel(sh_chan,
-		(hw.tcr >> calc_xmit_shift(sh_chan)), TCR);
+	sh_dmae_writel(sh_chan, hw.tcr >> calc_xmit_shift(sh_chan), TCR);
 }
 
 static void dmae_start(struct sh_dmae_chan *sh_chan)
 {
 	u32 chcr = sh_dmae_readl(sh_chan, CHCR);
 
-	chcr |= (CHCR_DE|CHCR_IE);
+	chcr |= CHCR_DE | CHCR_IE;
 	sh_dmae_writel(sh_chan, chcr, CHCR);
 }
 
@@ -132,7 +131,7 @@ static void dmae_halt(struct sh_dmae_chan *sh_chan)
 
 static int dmae_set_chcr(struct sh_dmae_chan *sh_chan, u32 val)
 {
-	int ret = dmae_is_idle(sh_chan);
+	int ret = dmae_is_busy(sh_chan);
 	/* When DMA was working, can not set data to CHCR */
 	if (ret)
 		return ret;
@@ -149,7 +148,7 @@ static int dmae_set_dmars(struct sh_dmae_chan *sh_chan, u16 val)
 {
 	u32 addr;
 	int shift = 0;
-	int ret = dmae_is_idle(sh_chan);
+	int ret = dmae_is_busy(sh_chan);
 	if (ret)
 		return ret;
 
@@ -307,7 +306,7 @@ static struct dma_async_tx_descriptor *sh_dmae_prep_memcpy(
 		new = sh_dmae_get_desc(sh_chan);
 		if (!new) {
 			dev_err(sh_chan->dev,
-					"No free memory for link descriptor\n");
+				"No free memory for link descriptor\n");
 			goto err_get_desc;
 		}
 
@@ -388,7 +387,7 @@ static void sh_chan_xfer_ld_queue(struct sh_dmae_chan *sh_chan)
 	struct sh_dmae_regs hw;
 
 	/* DMA work check */
-	if (dmae_is_idle(sh_chan))
+	if (dmae_is_busy(sh_chan))
 		return;
 
 	/* Find the first un-transfer desciptor */
@@ -497,8 +496,9 @@ static void dmae_do_tasklet(unsigned long data)
 	struct sh_dmae_chan *sh_chan = (struct sh_dmae_chan *)data;
 	struct sh_desc *desc, *_desc, *cur_desc = NULL;
 	u32 sar_buf = sh_dmae_readl(sh_chan, SAR);
+
 	list_for_each_entry_safe(desc, _desc,
-					&sh_chan->ld_queue, node) {
+				 &sh_chan->ld_queue, node) {
 		if ((desc->hw.sar + desc->hw.tcr) == sar_buf) {
 			cur_desc = desc;
 			break;
@@ -543,8 +543,8 @@ static int __devinit sh_dmae_chan_probe(struct sh_dmae_device *shdev, int id)
 	/* alloc channel */
 	new_sh_chan = kzalloc(sizeof(struct sh_dmae_chan), GFP_KERNEL);
 	if (!new_sh_chan) {
-		dev_err(shdev->common.dev, "No free memory for allocating "
-				"dma channels!\n");
+		dev_err(shdev->common.dev,
+			"No free memory for allocating dma channels!\n");
 		return -ENOMEM;
 	}
 
@@ -586,8 +586,8 @@ static int __devinit sh_dmae_chan_probe(struct sh_dmae_device *shdev, int id)
 			"sh-dmae%d", new_sh_chan->id);
 
 	/* set up channel irq */
-	err = request_irq(irq, &sh_dmae_interrupt,
-		irqflags, new_sh_chan->dev_id, new_sh_chan);
+	err = request_irq(irq, &sh_dmae_interrupt, irqflags,
+			  new_sh_chan->dev_id, new_sh_chan);
 	if (err) {
 		dev_err(shdev->common.dev, "DMA channel %d request_irq error "
 			"with return %d\n", id, err);
@@ -676,6 +676,8 @@ static int __init sh_dmae_probe(struct platform_device *pdev)
 	shdev->common.device_is_tx_complete = sh_dmae_is_complete;
 	shdev->common.device_issue_pending = sh_dmae_memcpy_issue_pending;
 	shdev->common.dev = &pdev->dev;
+	/* Default transfer size of 32 bytes requires 32-byte alignment */
+	shdev->common.copy_align = 5;
 
 #if defined(CONFIG_CPU_SH4)
 	/* Non Mix IRQ mode SH7722/SH7730 etc... */
@@ -688,8 +690,8 @@ static int __init sh_dmae_probe(struct platform_device *pdev)
 	}
 
 	for (ecnt = 0 ; ecnt < ARRAY_SIZE(eirq); ecnt++) {
-		err = request_irq(eirq[ecnt], sh_dmae_err,
-			irqflags, "DMAC Address Error", shdev);
+		err = request_irq(eirq[ecnt], sh_dmae_err, irqflags,
+				  "DMAC Address Error", shdev);
 		if (err) {
 			dev_err(&pdev->dev, "DMA device request_irq"
 				"error (irq %d) with return %d\n",

drivers/dma/shdma.h

@@ -35,15 +35,15 @@ struct sh_desc {
 
 struct sh_dmae_chan {
 	dma_cookie_t completed_cookie;	/* The maximum cookie completed */
-	spinlock_t desc_lock;			/* Descriptor operation lock */
-	struct list_head ld_queue;		/* Link descriptors queue */
-	struct list_head ld_free;		/* Link descriptors free */
-	struct dma_chan common;			/* DMA common channel */
-	struct device *dev;				/* Channel device */
+	spinlock_t desc_lock;		/* Descriptor operation lock */
+	struct list_head ld_queue;	/* Link descriptors queue */
+	struct list_head ld_free;	/* Link descriptors free */
+	struct dma_chan common;		/* DMA common channel */
+	struct device *dev;		/* Channel device */
 	struct tasklet_struct tasklet;	/* Tasklet */
-	int descs_allocated;			/* desc count */
+	int descs_allocated;		/* desc count */
 	int id;				/* Raw id of this channel */
-	char dev_id[16];	/* unique name per DMAC of channel */
+	char dev_id[16];		/* unique name per DMAC of channel */
 
 	/* Set chcr */
 	int (*set_chcr)(struct sh_dmae_chan *sh_chan, u32 regs);

include/linux/dmaengine.h

@@ -74,7 +74,7 @@ enum dma_transaction_type {
  *  control completion, and communicate status.
  * @DMA_PREP_INTERRUPT - trigger an interrupt (callback) upon completion of
  *  this transaction
- * @DMA_CTRL_ACK - the descriptor cannot be reused until the client
+ * @DMA_CTRL_ACK - if clear, the descriptor cannot be reused until the client
  *  acknowledges receipt, i.e. has has a chance to establish any dependency
  *  chains
  * @DMA_COMPL_SKIP_SRC_UNMAP - set to disable dma-unmapping the source buffer(s)