提交 79422741 编写于 作者: J Jiri Kosina

HID: add support for Kye/Genius Ergo 525V

This device sends several buttons in a separate field, which is
wrongly described in the report descriptor. Fix it in the following
way:

- change led usage page to button
- report size 8 count 1 becomes report size 1 count 8
- the button usage range changed to 4-7 (the mouse has three buttons in
  a different field already).
Reported-by: NTomas Hanak <tomas.hanak@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
上级 fef3f571
......@@ -143,6 +143,13 @@ config HID_EZKEY
---help---
Support for Ezkey BTC 8193 keyboard.
config HID_KYE
tristate "Kye" if EMBEDDED
depends on USB_HID
default !EMBEDDED
---help---
Support for Kye/Genius Ergo Mouse.
config HID_GYRATION
tristate "Gyration" if EMBEDDED
depends on USB_HID
......
......@@ -30,6 +30,7 @@ obj-$(CONFIG_DRAGONRISE_FF) += hid-drff.o
obj-$(CONFIG_HID_EZKEY) += hid-ezkey.o
obj-$(CONFIG_HID_GYRATION) += hid-gyration.o
obj-$(CONFIG_HID_KENSINGTON) += hid-kensington.o
obj-$(CONFIG_HID_KYE) += hid-kye.o
obj-$(CONFIG_HID_LOGITECH) += hid-logitech.o
obj-$(CONFIG_HID_MICROSOFT) += hid-microsoft.o
obj-$(CONFIG_HID_MONTEREY) += hid-monterey.o
......
......@@ -1274,6 +1274,7 @@ static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LABTEC, USB_DEVICE_ID_LABTEC_WIRELESS_KEYBOARD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_S510_RECEIVER) },
......
......@@ -34,6 +34,9 @@ static int __init hid_dummy_init(void)
#ifdef CONFIG_HID_EZKEY_MODULE
HID_COMPAT_CALL_DRIVER(ezkey);
#endif
#ifdef CONFIG_HID_KYE_MODULE
HID_COMPAT_CALL_DRIVER(kye);
#endif
#ifdef CONFIG_HID_GYRATION_MODULE
HID_COMPAT_CALL_DRIVER(gyration);
#endif
......
......@@ -426,6 +426,8 @@
#define USB_VENDOR_ID_ZEROPLUS 0x0c12
#define USB_VENDOR_ID_KYE 0x0458
#define USB_DEVICE_ID_KYE_ERGO_525V 0x0087
#define USB_DEVICE_ID_KYE_GPEN_560 0x5003
#endif
/*
* HID driver for Kye/Genius devices not fully compliant with HID standard
*
* Copyright (c) 2009 Jiri Kosina
* Copyright (c) 2009 Tomas Hanak
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*/
#include <linux/device.h>
#include <linux/hid.h>
#include <linux/module.h>
#include "hid-ids.h"
/* the fixups that need to be done:
* - change led usage page to button for extra buttons
* - report size 8 count 1 must be size 1 count 8 for button bitfield
* - change the button usage range to 4-7 for the extra buttons
*/
static void kye_report_fixup(struct hid_device *hdev, __u8 *rdesc,
unsigned int rsize)
{
if (rsize >= 74 &&
rdesc[61] == 0x05 && rdesc[62] == 0x08 &&
rdesc[63] == 0x19 && rdesc[64] == 0x08 &&
rdesc[65] == 0x29 && rdesc[66] == 0x0f &&
rdesc[71] == 0x75 && rdesc[72] == 0x08 &&
rdesc[73] == 0x95 && rdesc[74] == 0x01) {
dev_info(&hdev->dev, "fixing up Kye/Genius Ergo Mouse report "
"descriptor\n");
rdesc[62] = 0x09;
rdesc[64] = 0x04;
rdesc[66] = 0x07;
rdesc[72] = 0x01;
rdesc[74] = 0x08;
}
}
static const struct hid_device_id kye_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
{ }
};
MODULE_DEVICE_TABLE(hid, kye_devices);
static struct hid_driver kye_driver = {
.name = "kye",
.id_table = kye_devices,
.report_fixup = kye_report_fixup,
};
static int kye_init(void)
{
return hid_register_driver(&kye_driver);
}
static void kye_exit(void)
{
hid_unregister_driver(&kye_driver);
}
module_init(kye_init);
module_exit(kye_exit);
MODULE_LICENSE("GPL");
HID_COMPAT_LOAD_DRIVER(kye);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册