Merge tag 'platform-drivers-x86-v5.2-1' of git://git.infradead.org/linux-platform-drivers-x86

Pull x86 platform driver updates from Andy Shevchenko:
 "Gathered pile of patches for Platform Drivers x86. No surprises and no
  merge conflicts. Business as usual.

  Summary:

   - New driver of power button for Basin Cove PMIC.

   - ASUS WMI driver has got a Fn lock mode switch support.

   - Resolve a never end story with non working Wi-Fi on newer Lenovo
     Ideapad computers. Now the black list is replaced with white list.

   - New facility to debug S0ix failures on Intel Atom platforms. The
     Intel PMC and accompanying drivers are cleaned up.

   - Mellanox got a new TmFifo driver. Besides tachometer sensor and
     watchdog are enabled on Mellanox platforms.

   - The information of embedded controller is now recognized on new
     Thinkpads. Bluetooth driver on Thinkpads is blacklisted for some
     models.

   - Touchscreen DMI driver extended to support 'jumper ezpad 6 pro b'
     and Myria MY8307 2-in-1.

   - Additionally few small fixes here and there for WMI and ACPI laptop
     drivers.

   - The following is an automated git shortlog grouped by driver:

   - alienware-wmi:
      - printing the wrong error code
      - fix kfree on potentially uninitialized pointer

   - asus-wmi:
      - Add fn-lock mode switch support

   - dell-laptop:
      - fix rfkill functionality

   - dell-rbtn:
      - Add missing #include

   - ideapad-laptop:
      - Remove no_hw_rfkill_list

   - intel_pmc_core:
      - Allow to dump debug registers on S0ix failure
      - Convert to a platform_driver
      - Mark local function static

   - intel_pmc_ipc:
      - Don't map non-used optional resources
      - Apply same width for offset definitions
      - Use BIT() macro
      - adding error handling

   - intel_punit_ipc:
      - Revert "Fix resource ioremap warning"

   - mlx-platform:
      - Add mlx-wdt platform driver activation
      - Add support for tachometer speed register
      - Add TmFifo driver for Mellanox BlueField Soc

   - sony-laptop:
      - Fix unintentional fall-through

   - thinkpad_acpi:
      - cleanup for Thinkpad ACPI led
      - Mark expected switch fall-throughs
      - fix spelling mistake "capabilites" -> "capabilities"
      - Read EC information on newer models
      - Disable Bluetooth for some machines

   - touchscreen_dmi:
      - Add info for 'jumper ezpad 6 pro b' touchscreen
      - Add info for Myria MY8307 2-in-1"

* tag 'platform-drivers-x86-v5.2-1' of git://git.infradead.org/linux-platform-drivers-x86: (26 commits)
  platform/x86: Add support for Basin Cove power button
  platform/x86: asus-wmi: Add fn-lock mode switch support
  platform/x86: ideapad-laptop: Remove no_hw_rfkill_list
  platform/x86: touchscreen_dmi: Add info for 'jumper ezpad 6 pro b' touchscreen
  platform/x86: thinkpad_acpi: cleanup for Thinkpad ACPI led
  platform/x86: thinkpad_acpi: Mark expected switch fall-throughs
  platform/x86: sony-laptop: Fix unintentional fall-through
  platform/x86: alienware-wmi: printing the wrong error code
  platform/x86: intel_pmc_core: Allow to dump debug registers on S0ix failure
  platform/x86: intel_pmc_core: Convert to a platform_driver
  platform/x86: mlx-platform: Add mlx-wdt platform driver activation
  platform/x86: mlx-platform: Add support for tachometer speed register
  platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc
  platform/x86: thinkpad_acpi: fix spelling mistake "capabilites" -> "capabilities"
  platform/x86: intel_punit_ipc: Revert "Fix resource ioremap warning"
  platform/x86: intel_pmc_ipc: Don't map non-used optional resources
  platform/x86: intel_pmc_ipc: Apply same width for offset definitions
  platform/x86: intel_pmc_ipc: Use BIT() macro
  platform/x86: alienware-wmi: fix kfree on potentially uninitialized pointer
  platform/x86: dell-laptop: fix rfkill functionality
  ...

drivers/platform/mellanox/Kconfig

@@ -5,7 +5,7 @@
 
 menuconfig MELLANOX_PLATFORM
 	bool "Platform support for Mellanox hardware"
-	depends on X86 || ARM || COMPILE_TEST
+	depends on X86 || ARM || ARM64 || COMPILE_TEST
 	---help---
 	  Say Y here to get to see options for platform support for
 	  Mellanox systems. This option alone does not add any kernel code.
@@ -34,4 +34,14 @@ config MLXREG_IO
 	  to system resets operation, system reset causes monitoring and some
 	  kinds of mux selection.
 
+config MLXBF_TMFIFO
+	tristate "Mellanox BlueField SoC TmFifo platform driver"
+	depends on ARM64
+	depends on ACPI
+	depends on VIRTIO_CONSOLE && VIRTIO_NET
+	help
+	  Say y here to enable TmFifo support. The TmFifo driver provides
+          platform driver support for the TmFifo which supports console
+          and networking based on the virtio framework.
+
 endif # MELLANOX_PLATFORM

drivers/platform/mellanox/Makefile

@@ -3,5 +3,6 @@
 # Makefile for linux/drivers/platform/mellanox
 # Mellanox Platform-Specific Drivers
 #
+obj-$(CONFIG_MLXBF_TMFIFO)	+= mlxbf-tmfifo.o
 obj-$(CONFIG_MLXREG_HOTPLUG)	+= mlxreg-hotplug.o
 obj-$(CONFIG_MLXREG_IO) += mlxreg-io.o

drivers/platform/mellanox/mlxbf-tmfifo-regs.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2019, Mellanox Technologies. All rights reserved.
+ */
+
+#ifndef __MLXBF_TMFIFO_REGS_H__
+#define __MLXBF_TMFIFO_REGS_H__
+
+#include <linux/types.h>
+#include <linux/bits.h>
+
+#define MLXBF_TMFIFO_TX_DATA				0x00
+#define MLXBF_TMFIFO_TX_STS				0x08
+#define MLXBF_TMFIFO_TX_STS__LENGTH			0x0001
+#define MLXBF_TMFIFO_TX_STS__COUNT_SHIFT		0
+#define MLXBF_TMFIFO_TX_STS__COUNT_WIDTH		9
+#define MLXBF_TMFIFO_TX_STS__COUNT_RESET_VAL		0
+#define MLXBF_TMFIFO_TX_STS__COUNT_RMASK		GENMASK_ULL(8, 0)
+#define MLXBF_TMFIFO_TX_STS__COUNT_MASK			GENMASK_ULL(8, 0)
+#define MLXBF_TMFIFO_TX_CTL				0x10
+#define MLXBF_TMFIFO_TX_CTL__LENGTH			0x0001
+#define MLXBF_TMFIFO_TX_CTL__LWM_SHIFT			0
+#define MLXBF_TMFIFO_TX_CTL__LWM_WIDTH			8
+#define MLXBF_TMFIFO_TX_CTL__LWM_RESET_VAL		128
+#define MLXBF_TMFIFO_TX_CTL__LWM_RMASK			GENMASK_ULL(7, 0)
+#define MLXBF_TMFIFO_TX_CTL__LWM_MASK			GENMASK_ULL(7, 0)
+#define MLXBF_TMFIFO_TX_CTL__HWM_SHIFT			8
+#define MLXBF_TMFIFO_TX_CTL__HWM_WIDTH			8
+#define MLXBF_TMFIFO_TX_CTL__HWM_RESET_VAL		128
+#define MLXBF_TMFIFO_TX_CTL__HWM_RMASK			GENMASK_ULL(7, 0)
+#define MLXBF_TMFIFO_TX_CTL__HWM_MASK			GENMASK_ULL(15, 8)
+#define MLXBF_TMFIFO_TX_CTL__MAX_ENTRIES_SHIFT		32
+#define MLXBF_TMFIFO_TX_CTL__MAX_ENTRIES_WIDTH		9
+#define MLXBF_TMFIFO_TX_CTL__MAX_ENTRIES_RESET_VAL	256
+#define MLXBF_TMFIFO_TX_CTL__MAX_ENTRIES_RMASK		GENMASK_ULL(8, 0)
+#define MLXBF_TMFIFO_TX_CTL__MAX_ENTRIES_MASK		GENMASK_ULL(40, 32)
+#define MLXBF_TMFIFO_RX_DATA				0x00
+#define MLXBF_TMFIFO_RX_STS				0x08
+#define MLXBF_TMFIFO_RX_STS__LENGTH			0x0001
+#define MLXBF_TMFIFO_RX_STS__COUNT_SHIFT		0
+#define MLXBF_TMFIFO_RX_STS__COUNT_WIDTH		9
+#define MLXBF_TMFIFO_RX_STS__COUNT_RESET_VAL		0
+#define MLXBF_TMFIFO_RX_STS__COUNT_RMASK		GENMASK_ULL(8, 0)
+#define MLXBF_TMFIFO_RX_STS__COUNT_MASK			GENMASK_ULL(8, 0)
+#define MLXBF_TMFIFO_RX_CTL				0x10
+#define MLXBF_TMFIFO_RX_CTL__LENGTH			0x0001
+#define MLXBF_TMFIFO_RX_CTL__LWM_SHIFT			0
+#define MLXBF_TMFIFO_RX_CTL__LWM_WIDTH			8
+#define MLXBF_TMFIFO_RX_CTL__LWM_RESET_VAL		128
+#define MLXBF_TMFIFO_RX_CTL__LWM_RMASK			GENMASK_ULL(7, 0)
+#define MLXBF_TMFIFO_RX_CTL__LWM_MASK			GENMASK_ULL(7, 0)
+#define MLXBF_TMFIFO_RX_CTL__HWM_SHIFT			8
+#define MLXBF_TMFIFO_RX_CTL__HWM_WIDTH			8
+#define MLXBF_TMFIFO_RX_CTL__HWM_RESET_VAL		128
+#define MLXBF_TMFIFO_RX_CTL__HWM_RMASK			GENMASK_ULL(7, 0)
+#define MLXBF_TMFIFO_RX_CTL__HWM_MASK			GENMASK_ULL(15, 8)
+#define MLXBF_TMFIFO_RX_CTL__MAX_ENTRIES_SHIFT		32
+#define MLXBF_TMFIFO_RX_CTL__MAX_ENTRIES_WIDTH		9
+#define MLXBF_TMFIFO_RX_CTL__MAX_ENTRIES_RESET_VAL	256
+#define MLXBF_TMFIFO_RX_CTL__MAX_ENTRIES_RMASK		GENMASK_ULL(8, 0)
+#define MLXBF_TMFIFO_RX_CTL__MAX_ENTRIES_MASK		GENMASK_ULL(40, 32)
+
+#endif /* !defined(__MLXBF_TMFIFO_REGS_H__) */

drivers/platform/x86/Kconfig

@@ -1263,6 +1263,17 @@ config INTEL_CHTDC_TI_PWRBTN
 	  To compile this driver as a module, choose M here: the module
 	  will be called intel_chtdc_ti_pwrbtn.
 
+config INTEL_MRFLD_PWRBTN
+	tristate "Intel Merrifield Basin Cove power button driver"
+	depends on INTEL_SOC_PMIC_MRFLD
+	depends on INPUT
+	---help---
+	  This option adds a power button driver for Basin Cove PMIC
+	  on Intel Merrifield devices.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called intel_mrfld_pwrbtn.
+
 config I2C_MULTI_INSTANTIATE
 	tristate "I2C multi instantiate pseudo device driver"
 	depends on I2C && ACPI

drivers/platform/x86/Makefile

@@ -94,6 +94,7 @@ obj-$(CONFIG_PMC_ATOM)		+= pmc_atom.o
 obj-$(CONFIG_MLX_PLATFORM)	+= mlx-platform.o
 obj-$(CONFIG_INTEL_TURBO_MAX_3) += intel_turbo_max_3.o
 obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN)	+= intel_chtdc_ti_pwrbtn.o
+obj-$(CONFIG_INTEL_MRFLD_PWRBTN)	+= intel_mrfld_pwrbtn.o
 obj-$(CONFIG_I2C_MULTI_INSTANTIATE)	+= i2c-multi-instantiate.o
 obj-$(CONFIG_INTEL_ATOMISP2_PM)	+= intel_atomisp2_pm.o
 obj-$(CONFIG_PCENGINES_APU2)	+= pcengines-apuv2.o

drivers/platform/x86/alienware-wmi.c

@@ -522,23 +522,22 @@ static acpi_status alienware_wmax_command(struct wmax_basic_args *in_args,
 
 	input.length = (acpi_size) sizeof(*in_args);
 	input.pointer = in_args;
-	if (out_data != NULL) {
+	if (out_data) {
 		output.length = ACPI_ALLOCATE_BUFFER;
 		output.pointer = NULL;
 		status = wmi_evaluate_method(WMAX_CONTROL_GUID, 0,
 					     command, &input, &output);
-	} else
+		if (ACPI_SUCCESS(status)) {
+			obj = (union acpi_object *)output.pointer;
+			if (obj && obj->type == ACPI_TYPE_INTEGER)
+				*out_data = (u32)obj->integer.value;
+		}
+		kfree(output.pointer);
+	} else {
 		status = wmi_evaluate_method(WMAX_CONTROL_GUID, 0,
 					     command, &input, NULL);
-
-	if (ACPI_SUCCESS(status) && out_data != NULL) {
-		obj = (union acpi_object *)output.pointer;
-		if (obj && obj->type == ACPI_TYPE_INTEGER)
-			*out_data = (u32) obj->integer.value;
 	}
-	kfree(output.pointer);
 	return status;
-
 }
 
 /*
@@ -588,7 +587,7 @@ static ssize_t show_hdmi_source(struct device *dev,
 			return scnprintf(buf, PAGE_SIZE,
 					 "input [gpu] unknown\n");
 	}
-	pr_err("alienware-wmi: unknown HDMI source status: %d\n", out_data);
+	pr_err("alienware-wmi: unknown HDMI source status: %u\n", status);
 	return scnprintf(buf, PAGE_SIZE, "input gpu [unknown]\n");
 }
 

drivers/platform/x86/asus-wmi.c

@@ -66,10 +66,13 @@ MODULE_LICENSE("GPL");
 #define NOTIFY_BRNUP_MAX		0x1f
 #define NOTIFY_BRNDOWN_MIN		0x20
 #define NOTIFY_BRNDOWN_MAX		0x2e
+#define NOTIFY_FNLOCK_TOGGLE		0x4e
 #define NOTIFY_KBD_BRTUP		0xc4
 #define NOTIFY_KBD_BRTDWN		0xc5
 #define NOTIFY_KBD_BRTTOGGLE		0xc7
 
+#define ASUS_WMI_FNLOCK_BIOS_DISABLED	BIT(0)
+
 #define ASUS_FAN_DESC			"cpu_fan"
 #define ASUS_FAN_MFUN			0x13
 #define ASUS_FAN_SFUN_READ		0x06
@@ -177,6 +180,8 @@ struct asus_wmi {
 	struct workqueue_struct *hotplug_workqueue;
 	struct work_struct hotplug_work;
 
+	bool fnlock_locked;
+
 	struct asus_wmi_debug debug;
 
 	struct asus_wmi_driver *driver;
@@ -1619,6 +1624,23 @@ static int is_display_toggle(int code)
 	return 0;
 }
 
+static bool asus_wmi_has_fnlock_key(struct asus_wmi *asus)
+{
+	u32 result;
+
+	asus_wmi_get_devstate(asus, ASUS_WMI_DEVID_FNLOCK, &result);
+
+	return (result & ASUS_WMI_DSTS_PRESENCE_BIT) &&
+		!(result & ASUS_WMI_FNLOCK_BIOS_DISABLED);
+}
+
+static void asus_wmi_fnlock_update(struct asus_wmi *asus)
+{
+	int mode = asus->fnlock_locked;
+
+	asus_wmi_set_devstate(ASUS_WMI_DEVID_FNLOCK, mode, NULL);
+}
+
 static void asus_wmi_notify(u32 value, void *context)
 {
 	struct asus_wmi *asus = context;
@@ -1680,6 +1702,12 @@ static void asus_wmi_notify(u32 value, void *context)
 		goto exit;
 	}
 
+	if (code == NOTIFY_FNLOCK_TOGGLE) {
+		asus->fnlock_locked = !asus->fnlock_locked;
+		asus_wmi_fnlock_update(asus);
+		goto exit;
+	}
+
 	if (is_display_toggle(code) &&
 	    asus->driver->quirks->no_display_toggle)
 		goto exit;
@@ -2134,6 +2162,11 @@ static int asus_wmi_add(struct platform_device *pdev)
 	} else
 		err = asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL);
 
+	if (asus_wmi_has_fnlock_key(asus)) {
+		asus->fnlock_locked = true;
+		asus_wmi_fnlock_update(asus);
+	}
+
 	status = wmi_install_notify_handler(asus->driver->event_guid,
 					    asus_wmi_notify, asus);
 	if (ACPI_FAILURE(status)) {
@@ -2213,6 +2246,8 @@ static int asus_hotk_resume(struct device *device)
 	if (!IS_ERR_OR_NULL(asus->kbd_led.dev))
 		kbd_led_update(asus);
 
+	if (asus_wmi_has_fnlock_key(asus))
+		asus_wmi_fnlock_update(asus);
 	return 0;
 }
 
@@ -2249,6 +2284,8 @@ static int asus_hotk_restore(struct device *device)
 	if (!IS_ERR_OR_NULL(asus->kbd_led.dev))
 		kbd_led_update(asus);
 
+	if (asus_wmi_has_fnlock_key(asus))
+		asus_wmi_fnlock_update(asus);
 	return 0;
 }
 

drivers/platform/x86/dell-laptop.c

@@ -531,7 +531,7 @@ static void dell_rfkill_query(struct rfkill *rfkill, void *data)
 		return;
 	}
 
-	dell_fill_request(&buffer, 0, 0x2, 0, 0);
+	dell_fill_request(&buffer, 0x2, 0, 0, 0);
 	ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
 	hwswitch = buffer.output[1];
 
@@ -562,7 +562,7 @@ static int dell_debugfs_show(struct seq_file *s, void *data)
 		return ret;
 	status = buffer.output[1];
 
-	dell_fill_request(&buffer, 0, 0x2, 0, 0);
+	dell_fill_request(&buffer, 0x2, 0, 0, 0);
 	hwswitch_ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
 	if (hwswitch_ret)
 		return hwswitch_ret;
@@ -647,7 +647,7 @@ static void dell_update_rfkill(struct work_struct *ignored)
 	if (ret != 0)
 		return;
 
-	dell_fill_request(&buffer, 0, 0x2, 0, 0);
+	dell_fill_request(&buffer, 0x2, 0, 0, 0);
 	ret = dell_send_request(&buffer, CLASS_INFO, SELECT_RFKILL);
 
 	if (ret == 0 && (status & BIT(0)))

drivers/platform/x86/dell-rbtn.c

@@ -18,6 +18,8 @@
 #include <linux/rfkill.h>
 #include <linux/input.h>
 
+#include "dell-rbtn.h"
+
 enum rbtn_type {
 	RBTN_UNKNOWN,
 	RBTN_TOGGLE,

drivers/platform/x86/ideapad-laptop.c

@@ -980,312 +980,21 @@ static void ideapad_wmi_notify(u32 value, void *context)
 #endif
 
 /*
- * Some ideapads don't have a hardware rfkill switch, reading VPCCMD_R_RF
- * always results in 0 on these models, causing ideapad_laptop to wrongly
- * report all radios as hardware-blocked.
+ * Some ideapads have a hardware rfkill switch, but most do not have one.
+ * Reading VPCCMD_R_RF always results in 0 on models without a hardware rfkill,
+ * switch causing ideapad_laptop to wrongly report all radios as hw-blocked.
+ * There used to be a long list of DMI ids for models without a hw rfkill
+ * switch here, but that resulted in playing whack a mole.
+ * More importantly wrongly reporting the wifi radio as hw-blocked, results in
+ * non working wifi. Whereas not reporting it hw-blocked, when it actually is
+ * hw-blocked results in an empty SSID list, which is a much more benign
+ * failure mode.
+ * So the default now is the much safer option of assuming there is no
+ * hardware rfkill switch. This default also actually matches most hardware,
+ * since having a hw rfkill switch is quite rare on modern hardware, so this
+ * also leads to a much shorter list.
  */
-static const struct dmi_system_id no_hw_rfkill_list[] = {
-	{
-		.ident = "Lenovo RESCUER R720-15IKBN",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo R720-15IKBN"),
-		},
-	},
-	{
-		.ident = "Lenovo G40-30",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo G40-30"),
-		},
-	},
-	{
-		.ident = "Lenovo G50-30",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo G50-30"),
-		},
-	},
-	{
-		.ident = "Lenovo V310-14IKB",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo V310-14IKB"),
-		},
-	},
-	{
-		.ident = "Lenovo V310-14ISK",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo V310-14ISK"),
-		},
-	},
-	{
-		.ident = "Lenovo V310-15IKB",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo V310-15IKB"),
-		},
-	},
-	{
-		.ident = "Lenovo V310-15ISK",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo V310-15ISK"),
-		},
-	},
-	{
-		.ident = "Lenovo V510-15IKB",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo V510-15IKB"),
-		},
-	},
-	{
-		.ident = "Lenovo ideapad 300-15IBR",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 300-15IBR"),
-		},
-	},
-	{
-		.ident = "Lenovo ideapad 300-15IKB",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 300-15IKB"),
-		},
-	},
-	{
-		.ident = "Lenovo ideapad 300S-11IBR",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 300S-11BR"),
-		},
-	},
-	{
-		.ident = "Lenovo ideapad 310-15ABR",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 310-15ABR"),
-		},
-	},
-	{
-		.ident = "Lenovo ideapad 310-15IAP",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 310-15IAP"),
-		},
-	},
-	{
-		.ident = "Lenovo ideapad 310-15IKB",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 310-15IKB"),
-		},
-	},
-	{
-		.ident = "Lenovo ideapad 310-15ISK",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 310-15ISK"),
-		},
-	},
-	{
-		.ident = "Lenovo ideapad 330-15ICH",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 330-15ICH"),
-		},
-	},
-	{
-		.ident = "Lenovo ideapad 530S-14ARR",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad 530S-14ARR"),
-		},
-	},
-	{
-		.ident = "Lenovo ideapad S130-14IGM",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad S130-14IGM"),
-		},
-	},
-	{
-		.ident = "Lenovo ideapad Y700-14ISK",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad Y700-14ISK"),
-		},
-	},
-	{
-		.ident = "Lenovo ideapad Y700-15ACZ",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad Y700-15ACZ"),
-		},
-	},
-	{
-		.ident = "Lenovo ideapad Y700-15ISK",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad Y700-15ISK"),
-		},
-	},
-	{
-		.ident = "Lenovo ideapad Y700 Touch-15ISK",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad Y700 Touch-15ISK"),
-		},
-	},
-	{
-		.ident = "Lenovo ideapad Y700-17ISK",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad Y700-17ISK"),
-		},
-	},
-	{
-		.ident = "Lenovo ideapad MIIX 720-12IKB",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "MIIX 720-12IKB"),
-		},
-	},
-	{
-		.ident = "Lenovo Legion Y520-15IKB",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Y520-15IKB"),
-		},
-	},
-	{
-		.ident = "Lenovo Y520-15IKBM",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Y520-15IKBM"),
-		},
-	},
-	{
-		.ident = "Lenovo Legion Y530-15ICH",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Legion Y530-15ICH"),
-		},
-	},
-	{
-		.ident = "Lenovo Legion Y530-15ICH-1060",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Legion Y530-15ICH-1060"),
-		},
-	},
-	{
-		.ident = "Lenovo Legion Y720-15IKB",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Y720-15IKB"),
-		},
-	},
-	{
-		.ident = "Lenovo Legion Y720-15IKBN",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Y720-15IKBN"),
-		},
-	},
-	{
-		.ident = "Lenovo Y720-15IKBM",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Y720-15IKBM"),
-		},
-	},
-	{
-		.ident = "Lenovo Yoga 2 11 / 13 / Pro",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Yoga 2"),
-		},
-	},
-	{
-		.ident = "Lenovo Yoga 2 11 / 13 / Pro",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_BOARD_NAME, "Yoga2"),
-		},
-	},
-	{
-		.ident = "Lenovo Yoga 2 13",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Yoga 2 13"),
-		},
-	},
-	{
-		.ident = "Lenovo Yoga 3 1170 / 1470",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Yoga 3"),
-		},
-	},
-	{
-		.ident = "Lenovo Yoga 3 Pro 1370",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 3"),
-		},
-	},
-	{
-		.ident = "Lenovo Yoga 700",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 700"),
-		},
-	},
-	{
-		.ident = "Lenovo Yoga 900",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 900"),
-		},
-	},
-	{
-		.ident = "Lenovo Yoga 900",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_BOARD_NAME, "VIUU4"),
-		},
-	},
-	{
-		.ident = "Lenovo YOGA 910-13IKB",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 910-13IKB"),
-		},
-	},
-	{
-		.ident = "Lenovo YOGA 920-13IKB",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 920-13IKB"),
-		},
-	},
-	{
-		.ident = "Lenovo YOGA C930-13IKB",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA C930-13IKB"),
-		},
-	},
-	{
-		.ident = "Lenovo Zhaoyang E42-80",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "ZHAOYANG E42-80"),
-		},
-	},
+static const struct dmi_system_id hw_rfkill_list[] = {
 	{}
 };
 
@@ -1311,7 +1020,7 @@ static int ideapad_acpi_add(struct platform_device *pdev)
 	priv->cfg = cfg;
 	priv->adev = adev;
 	priv->platform_device = pdev;
-	priv->has_hw_rfkill_switch = !dmi_check_system(no_hw_rfkill_list);
+	priv->has_hw_rfkill_switch = dmi_check_system(hw_rfkill_list);
 
 	ret = ideapad_sysfs_init(priv);
 	if (ret)

drivers/platform/x86/intel_mrfld_pwrbtn.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Power-button driver for Basin Cove PMIC
+ *
+ * Copyright (c) 2019, Intel Corporation.
+ * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+ */
+
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/mfd/intel_soc_pmic_mrfld.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/slab.h>
+
+#define BCOVE_PBSTATUS		0x27
+#define BCOVE_PBSTATUS_PBLVL	BIT(4)	/* 1 - release, 0 - press */
+
+static irqreturn_t mrfld_pwrbtn_interrupt(int irq, void *dev_id)
+{
+	struct input_dev *input = dev_id;
+	struct device *dev = input->dev.parent;
+	struct regmap *regmap = dev_get_drvdata(dev);
+	unsigned int state;
+	int ret;
+
+	ret = regmap_read(regmap, BCOVE_PBSTATUS, &state);
+	if (ret)
+		return IRQ_NONE;
+
+	dev_dbg(dev, "PBSTATUS=0x%x\n", state);
+	input_report_key(input, KEY_POWER, !(state & BCOVE_PBSTATUS_PBLVL));
+	input_sync(input);
+
+	regmap_update_bits(regmap, BCOVE_MIRQLVL1, BCOVE_LVL1_PWRBTN, 0);
+	return IRQ_HANDLED;
+}
+
+static int mrfld_pwrbtn_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent);
+	struct input_dev *input;
+	int irq, ret;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+	input->name = pdev->name;
+	input->phys = "power-button/input0";
+	input->id.bustype = BUS_HOST;
+	input->dev.parent = dev;
+	input_set_capability(input, EV_KEY, KEY_POWER);
+	ret = input_register_device(input);
+	if (ret)
+		return ret;
+
+	dev_set_drvdata(dev, pmic->regmap);
+
+	ret = devm_request_threaded_irq(dev, irq, NULL, mrfld_pwrbtn_interrupt,
+					IRQF_ONESHOT | IRQF_SHARED, pdev->name,
+					input);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(pmic->regmap, BCOVE_MIRQLVL1, BCOVE_LVL1_PWRBTN, 0);
+	regmap_update_bits(pmic->regmap, BCOVE_MPBIRQ, BCOVE_PBIRQ_PBTN, 0);
+
+	device_init_wakeup(dev, true);
+	dev_pm_set_wake_irq(dev, irq);
+	return 0;
+}
+
+static int mrfld_pwrbtn_remove(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+
+	dev_pm_clear_wake_irq(dev);
+	device_init_wakeup(dev, false);
+	return 0;
+}
+
+static const struct platform_device_id mrfld_pwrbtn_id_table[] = {
+	{ .name = "mrfld_bcove_pwrbtn" },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, mrfld_pwrbtn_id_table);
+
+static struct platform_driver mrfld_pwrbtn_driver = {
+	.driver = {
+		.name	= "mrfld_bcove_pwrbtn",
+	},
+	.probe		= mrfld_pwrbtn_probe,
+	.remove		= mrfld_pwrbtn_remove,
+	.id_table	= mrfld_pwrbtn_id_table,
+};
+module_platform_driver(mrfld_pwrbtn_driver);
+
+MODULE_DESCRIPTION("Power-button driver for Basin Cove PMIC");
+MODULE_LICENSE("GPL v2");

drivers/platform/x86/intel_pmc_core.c

@@ -19,6 +19,8 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/suspend.h>
 #include <linux/uaccess.h>
 
 #include <asm/cpu_device_id.h>
@@ -828,7 +830,7 @@ static const struct pci_device_id pmc_pci_ids[] = {
  * the platform BIOS enforces 24Mhx Crystal to shutdown
  * before PMC can assert SLP_S0#.
  */
-int quirk_xtal_ignore(const struct dmi_system_id *id)
+static int quirk_xtal_ignore(const struct dmi_system_id *id)
 {
 	struct pmc_dev *pmcdev = &pmc;
 	u32 value;
@@ -854,13 +856,17 @@ static const struct dmi_system_id pmc_core_dmi_table[]  = {
 	{}
 };
 
-static int __init pmc_core_probe(void)
+static int pmc_core_probe(struct platform_device *pdev)
 {
+	static bool device_initialized;
 	struct pmc_dev *pmcdev = &pmc;
 	const struct x86_cpu_id *cpu_id;
 	u64 slp_s0_addr;
 	int err;
 
+	if (device_initialized)
+		return -ENODEV;
+
 	cpu_id = x86_match_cpu(intel_pmc_core_ids);
 	if (!cpu_id)
 		return -ENODEV;
@@ -886,30 +892,178 @@ static int __init pmc_core_probe(void)
 		return -ENOMEM;
 
 	mutex_init(&pmcdev->lock);
+	platform_set_drvdata(pdev, pmcdev);
 	pmcdev->pmc_xram_read_bit = pmc_core_check_read_lock_bit();
+	dmi_check_system(pmc_core_dmi_table);
 
 	err = pmc_core_dbgfs_register(pmcdev);
 	if (err < 0) {
-		pr_warn(" debugfs register failed.\n");
+		dev_warn(&pdev->dev, "debugfs register failed.\n");
 		iounmap(pmcdev->regbase);
 		return err;
 	}
 
-	dmi_check_system(pmc_core_dmi_table);
-	pr_info(" initialized\n");
+	device_initialized = true;
+	dev_info(&pdev->dev, " initialized\n");
+
 	return 0;
 }
-module_init(pmc_core_probe)
 
-static void __exit pmc_core_remove(void)
+static int pmc_core_remove(struct platform_device *pdev)
 {
-	struct pmc_dev *pmcdev = &pmc;
+	struct pmc_dev *pmcdev = platform_get_drvdata(pdev);
 
 	pmc_core_dbgfs_unregister(pmcdev);
+	platform_set_drvdata(pdev, NULL);
 	mutex_destroy(&pmcdev->lock);
 	iounmap(pmcdev->regbase);
+	return 0;
 }
-module_exit(pmc_core_remove)
+
+#ifdef CONFIG_PM_SLEEP
+
+static bool warn_on_s0ix_failures;
+module_param(warn_on_s0ix_failures, bool, 0644);
+MODULE_PARM_DESC(warn_on_s0ix_failures, "Check and warn for S0ix failures");
+
+static int pmc_core_suspend(struct device *dev)
+{
+	struct pmc_dev *pmcdev = dev_get_drvdata(dev);
+
+	pmcdev->check_counters = false;
+
+	/* No warnings on S0ix failures */
+	if (!warn_on_s0ix_failures)
+		return 0;
+
+	/* Check if the syspend will actually use S0ix */
+	if (pm_suspend_via_firmware())
+		return 0;
+
+	/* Save PC10 residency for checking later */
+	if (rdmsrl_safe(MSR_PKG_C10_RESIDENCY, &pmcdev->pc10_counter))
+		return -EIO;
+
+	/* Save S0ix residency for checking later */
+	if (pmc_core_dev_state_get(pmcdev, &pmcdev->s0ix_counter))
+		return -EIO;
+
+	pmcdev->check_counters = true;
+	return 0;
+}
+
+static inline bool pmc_core_is_pc10_failed(struct pmc_dev *pmcdev)
+{
+	u64 pc10_counter;
+
+	if (rdmsrl_safe(MSR_PKG_C10_RESIDENCY, &pc10_counter))
+		return false;
+
+	if (pc10_counter == pmcdev->pc10_counter)
+		return true;
+
+	return false;
+}
+
+static inline bool pmc_core_is_s0ix_failed(struct pmc_dev *pmcdev)
+{
+	u64 s0ix_counter;
+
+	if (pmc_core_dev_state_get(pmcdev, &s0ix_counter))
+		return false;
+
+	if (s0ix_counter == pmcdev->s0ix_counter)
+		return true;
+
+	return false;
+}
+
+static int pmc_core_resume(struct device *dev)
+{
+	struct pmc_dev *pmcdev = dev_get_drvdata(dev);
+	const struct pmc_bit_map **maps = pmcdev->map->slps0_dbg_maps;
+	int offset = pmcdev->map->slps0_dbg_offset;
+	const struct pmc_bit_map *map;
+	u32 data;
+
+	if (!pmcdev->check_counters)
+		return 0;
+
+	if (!pmc_core_is_s0ix_failed(pmcdev))
+		return 0;
+
+	if (pmc_core_is_pc10_failed(pmcdev)) {
+		/* S0ix failed because of PC10 entry failure */
+		dev_info(dev, "CPU did not enter PC10!!! (PC10 cnt=0x%llx)\n",
+			 pmcdev->pc10_counter);
+		return 0;
+	}
+
+	/* The real interesting case - S0ix failed - lets ask PMC why. */
+	dev_warn(dev, "CPU did not enter SLP_S0!!! (S0ix cnt=%llu)\n",
+		 pmcdev->s0ix_counter);
+	while (*maps) {
+		map = *maps;
+		data = pmc_core_reg_read(pmcdev, offset);
+		offset += 4;
+		while (map->name) {
+			dev_dbg(dev, "SLP_S0_DBG: %-32s\tState: %s\n",
+				map->name,
+				data & map->bit_mask ? "Yes" : "No");
+			map++;
+		}
+		maps++;
+	}
+	return 0;
+}
+
+#endif
+
+static const struct dev_pm_ops pmc_core_pm_ops = {
+	SET_LATE_SYSTEM_SLEEP_PM_OPS(pmc_core_suspend, pmc_core_resume)
+};
+
+static struct platform_driver pmc_core_driver = {
+	.driver = {
+		.name = "intel_pmc_core",
+		.pm = &pmc_core_pm_ops,
+	},
+	.probe = pmc_core_probe,
+	.remove = pmc_core_remove,
+};
+
+static struct platform_device pmc_core_device = {
+	.name = "intel_pmc_core",
+};
+
+static int __init pmc_core_init(void)
+{
+	int ret;
+
+	if (!x86_match_cpu(intel_pmc_core_ids))
+		return -ENODEV;
+
+	ret = platform_driver_register(&pmc_core_driver);
+	if (ret)
+		return ret;
+
+	ret = platform_device_register(&pmc_core_device);
+	if (ret) {
+		platform_driver_unregister(&pmc_core_driver);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void __exit pmc_core_exit(void)
+{
+	platform_device_unregister(&pmc_core_device);
+	platform_driver_unregister(&pmc_core_driver);
+}
+
+module_init(pmc_core_init)
+module_exit(pmc_core_exit)
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("Intel PMC Core Driver");

drivers/platform/x86/intel_pmc_core.h

@@ -241,6 +241,9 @@ struct pmc_reg_map {
  * @pmc_xram_read_bit:	flag to indicate whether PMC XRAM shadow registers
  *			used to read MPHY PG and PLL status are available
  * @mutex_lock:		mutex to complete one transcation
+ * @check_counters:	On resume, check if counters are getting incremented
+ * @pc10_counter:	PC10 residency counter
+ * @s0ix_counter:	S0ix residency (step adjusted)
  *
  * pmc_dev contains info about power management controller device.
  */
@@ -253,6 +256,10 @@ struct pmc_dev {
 #endif /* CONFIG_DEBUG_FS */
 	int pmc_xram_read_bit;
 	struct mutex lock; /* generic mutex lock for PMC Core */
+
+	bool check_counters; /* Check for counter increments on resume */
+	u64 pc10_counter;
+	u64 s0ix_counter;
 };
 
 #endif /* PMC_CORE_H */

drivers/platform/x86/intel_pmc_ipc.c

@@ -40,14 +40,14 @@
  * The ARC handles the interrupt and services it, writing optional data to
  * the IPC1 registers, updates the IPC_STS response register with the status.
  */
-#define IPC_CMD			0x0
-#define		IPC_CMD_MSI		0x100
+#define IPC_CMD			0x00
+#define		IPC_CMD_MSI		BIT(8)
 #define		IPC_CMD_SIZE		16
 #define		IPC_CMD_SUBCMD		12
 #define IPC_STATUS		0x04
-#define		IPC_STATUS_IRQ		0x4
-#define		IPC_STATUS_ERR		0x2
-#define		IPC_STATUS_BUSY		0x1
+#define		IPC_STATUS_IRQ		BIT(2)
+#define		IPC_STATUS_ERR		BIT(1)
+#define		IPC_STATUS_BUSY		BIT(0)
 #define IPC_SPTR		0x08
 #define IPC_DPTR		0x0C
 #define IPC_WRITE_BUFFER	0x80
@@ -101,13 +101,13 @@
 #define TELEM_SSRAM_SIZE		240
 #define TELEM_PMC_SSRAM_OFFSET		0x1B00
 #define TELEM_PUNIT_SSRAM_OFFSET	0x1A00
-#define TCO_PMC_OFFSET			0x8
-#define TCO_PMC_SIZE			0x4
+#define TCO_PMC_OFFSET			0x08
+#define TCO_PMC_SIZE			0x04
 
 /* PMC register bit definitions */
 
 /* PMC_CFG_REG bit masks */
-#define PMC_CFG_NO_REBOOT_MASK		(1 << 4)
+#define PMC_CFG_NO_REBOOT_MASK		BIT_MASK(4)
 #define PMC_CFG_NO_REBOOT_EN		(1 << 4)
 #define PMC_CFG_NO_REBOOT_DIS		(0 << 4)
 
@@ -131,6 +131,7 @@ static struct intel_pmc_ipc_dev {
 
 	/* punit */
 	struct platform_device *punit_dev;
+	unsigned int punit_res_count;
 
 	/* Telemetry */
 	resource_size_t telem_pmc_ssram_base;
@@ -682,7 +683,7 @@ static int ipc_create_punit_device(void)
 		.name = PUNIT_DEVICE_NAME,
 		.id = -1,
 		.res = punit_res_array,
-		.num_res = ARRAY_SIZE(punit_res_array),
+		.num_res = ipcdev.punit_res_count,
 		};
 
 	pdev = platform_device_register_full(&pdevinfo);
@@ -771,13 +772,17 @@ static int ipc_create_pmc_devices(void)
 	if (ret) {
 		dev_err(ipcdev.dev, "Failed to add punit platform device\n");
 		platform_device_unregister(ipcdev.tco_dev);
+		return ret;
 	}
 
 	if (!ipcdev.telem_res_inval) {
 		ret = ipc_create_telemetry_device();
-		if (ret)
+		if (ret) {
 			dev_warn(ipcdev.dev,
 				"Failed to add telemetry platform device\n");
+			platform_device_unregister(ipcdev.punit_dev);
+			platform_device_unregister(ipcdev.tco_dev);
+		}
 	}
 
 	return ret;
@@ -785,7 +790,7 @@ static int ipc_create_pmc_devices(void)
 
 static int ipc_plat_get_res(struct platform_device *pdev)
 {
-	struct resource *res, *punit_res;
+	struct resource *res, *punit_res = punit_res_array;
 	void __iomem *addr;
 	int size;
 
@@ -800,7 +805,8 @@ static int ipc_plat_get_res(struct platform_device *pdev)
 	ipcdev.acpi_io_size = size;
 	dev_info(&pdev->dev, "io res: %pR\n", res);
 
-	punit_res = punit_res_array;
+	ipcdev.punit_res_count = 0;
+
 	/* This is index 0 to cover BIOS data register */
 	res = platform_get_resource(pdev, IORESOURCE_MEM,
 				    PLAT_RESOURCE_BIOS_DATA_INDEX);
@@ -808,7 +814,7 @@ static int ipc_plat_get_res(struct platform_device *pdev)
 		dev_err(&pdev->dev, "Failed to get res of punit BIOS data\n");
 		return -ENXIO;
 	}
-	*punit_res = *res;
+	punit_res[ipcdev.punit_res_count++] = *res;
 	dev_info(&pdev->dev, "punit BIOS data res: %pR\n", res);
 
 	/* This is index 1 to cover BIOS interface register */
@@ -818,42 +824,38 @@ static int ipc_plat_get_res(struct platform_device *pdev)
 		dev_err(&pdev->dev, "Failed to get res of punit BIOS iface\n");
 		return -ENXIO;
 	}
-	*++punit_res = *res;
+	punit_res[ipcdev.punit_res_count++] = *res;
 	dev_info(&pdev->dev, "punit BIOS interface res: %pR\n", res);
 
 	/* This is index 2 to cover ISP data register, optional */
 	res = platform_get_resource(pdev, IORESOURCE_MEM,
 				    PLAT_RESOURCE_ISP_DATA_INDEX);
-	++punit_res;
 	if (res) {
-		*punit_res = *res;
+		punit_res[ipcdev.punit_res_count++] = *res;
 		dev_info(&pdev->dev, "punit ISP data res: %pR\n", res);
 	}
 
 	/* This is index 3 to cover ISP interface register, optional */
 	res = platform_get_resource(pdev, IORESOURCE_MEM,
 				    PLAT_RESOURCE_ISP_IFACE_INDEX);
-	++punit_res;
 	if (res) {
-		*punit_res = *res;
+		punit_res[ipcdev.punit_res_count++] = *res;
 		dev_info(&pdev->dev, "punit ISP interface res: %pR\n", res);
 	}
 
 	/* This is index 4 to cover GTD data register, optional */
 	res = platform_get_resource(pdev, IORESOURCE_MEM,
 				    PLAT_RESOURCE_GTD_DATA_INDEX);
-	++punit_res;
 	if (res) {
-		*punit_res = *res;
+		punit_res[ipcdev.punit_res_count++] = *res;
 		dev_info(&pdev->dev, "punit GTD data res: %pR\n", res);
 	}
 
 	/* This is index 5 to cover GTD interface register, optional */
 	res = platform_get_resource(pdev, IORESOURCE_MEM,
 				    PLAT_RESOURCE_GTD_IFACE_INDEX);
-	++punit_res;
 	if (res) {
-		*punit_res = *res;
+		punit_res[ipcdev.punit_res_count++] = *res;
 		dev_info(&pdev->dev, "punit GTD interface res: %pR\n", res);
 	}
 

drivers/platform/x86/intel_punit_ipc.c

@@ -252,28 +252,28 @@ static int intel_punit_get_bars(struct platform_device *pdev)
 	 * - GTDRIVER_IPC BASE_IFACE
 	 */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
-	if (res && resource_size(res) > 1) {
+	if (res) {
 		addr = devm_ioremap_resource(&pdev->dev, res);
 		if (!IS_ERR(addr))
 			punit_ipcdev->base[ISPDRIVER_IPC][BASE_DATA] = addr;
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
-	if (res && resource_size(res) > 1) {
+	if (res) {
 		addr = devm_ioremap_resource(&pdev->dev, res);
 		if (!IS_ERR(addr))
 			punit_ipcdev->base[ISPDRIVER_IPC][BASE_IFACE] = addr;
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 4);
-	if (res && resource_size(res) > 1) {
+	if (res) {
 		addr = devm_ioremap_resource(&pdev->dev, res);
 		if (!IS_ERR(addr))
 			punit_ipcdev->base[GTDRIVER_IPC][BASE_DATA] = addr;
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 5);
-	if (res && resource_size(res) > 1) {
+	if (res) {
 		addr = devm_ioremap_resource(&pdev->dev, res);
 		if (!IS_ERR(addr))
 			punit_ipcdev->base[GTDRIVER_IPC][BASE_IFACE] = addr;

drivers/platform/x86/mlx-platform.c

@@ -56,6 +56,16 @@
 #define MLXPLAT_CPLD_LPC_REG_FAN_OFFSET		0x88
 #define MLXPLAT_CPLD_LPC_REG_FAN_EVENT_OFFSET	0x89
 #define MLXPLAT_CPLD_LPC_REG_FAN_MASK_OFFSET	0x8a
+#define MLXPLAT_CPLD_LPC_REG_WD_CLEAR_OFFSET	0xc7
+#define MLXPLAT_CPLD_LPC_REG_WD_CLEAR_WP_OFFSET	0xc8
+#define MLXPLAT_CPLD_LPC_REG_WD1_TMR_OFFSET	0xc9
+#define MLXPLAT_CPLD_LPC_REG_WD1_ACT_OFFSET	0xcb
+#define MLXPLAT_CPLD_LPC_REG_WD2_TMR_OFFSET	0xcd
+#define MLXPLAT_CPLD_LPC_REG_WD2_TLEFT_OFFSET	0xce
+#define MLXPLAT_CPLD_LPC_REG_WD2_ACT_OFFSET	0xcf
+#define MLXPLAT_CPLD_LPC_REG_WD3_TMR_OFFSET	0xd1
+#define MLXPLAT_CPLD_LPC_REG_WD3_TLEFT_OFFSET	0xd2
+#define MLXPLAT_CPLD_LPC_REG_WD3_ACT_OFFSET	0xd3
 #define MLXPLAT_CPLD_LPC_REG_PWM1_OFFSET	0xe3
 #define MLXPLAT_CPLD_LPC_REG_TACHO1_OFFSET	0xe4
 #define MLXPLAT_CPLD_LPC_REG_TACHO2_OFFSET	0xe5
@@ -72,6 +82,7 @@
 #define MLXPLAT_CPLD_LPC_REG_FAN_CAP1_OFFSET	0xf5
 #define MLXPLAT_CPLD_LPC_REG_FAN_CAP2_OFFSET	0xf6
 #define MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET	0xf7
+#define MLXPLAT_CPLD_LPC_REG_TACHO_SPEED_OFFSET	0xf8
 #define MLXPLAT_CPLD_LPC_IO_RANGE		0x100
 #define MLXPLAT_CPLD_LPC_I2C_CH1_OFF		0xdb
 #define MLXPLAT_CPLD_LPC_I2C_CH2_OFF		0xda
@@ -128,6 +139,18 @@
 #define MLXPLAT_CPLD_FAN3_DEFAULT_NR		13
 #define MLXPLAT_CPLD_FAN4_DEFAULT_NR		14
 
+/* Masks and default values for watchdogs */
+#define MLXPLAT_CPLD_WD1_CLEAR_MASK	GENMASK(7, 1)
+#define MLXPLAT_CPLD_WD2_CLEAR_MASK	(GENMASK(7, 0) & ~BIT(1))
+
+#define MLXPLAT_CPLD_WD_TYPE1_TO_MASK	GENMASK(7, 4)
+#define MLXPLAT_CPLD_WD_TYPE2_TO_MASK	0
+#define MLXPLAT_CPLD_WD_RESET_ACT_MASK	GENMASK(7, 1)
+#define MLXPLAT_CPLD_WD_FAN_ACT_MASK	(GENMASK(7, 0) & ~BIT(4))
+#define MLXPLAT_CPLD_WD_COUNT_ACT_MASK	(GENMASK(7, 0) & ~BIT(7))
+#define MLXPLAT_CPLD_WD_DFLT_TIMEOUT	30
+#define MLXPLAT_CPLD_WD_MAX_DEVS	2
+
 /* mlxplat_priv - platform private data
  * @pdev_i2c - i2c controller platform device
  * @pdev_mux - array of mux platform devices
@@ -135,6 +158,7 @@
  * @pdev_led - led platform devices
  * @pdev_io_regs - register access platform devices
  * @pdev_fan - FAN platform devices
+ * @pdev_wd - array of watchdog platform devices
  */
 struct mlxplat_priv {
 	struct platform_device *pdev_i2c;
@@ -143,6 +167,7 @@ struct mlxplat_priv {
 	struct platform_device *pdev_led;
 	struct platform_device *pdev_io_regs;
 	struct platform_device *pdev_fan;
+	struct platform_device *pdev_wd[MLXPLAT_CPLD_WD_MAX_DEVS];
 };
 
 /* Regions for LPC I2C controller and LPC base register space */
@@ -1339,6 +1364,10 @@ static struct mlxreg_core_data mlxplat_mlxcpld_default_fan_data[] = {
 		.capability = MLXPLAT_CPLD_LPC_REG_FAN_CAP2_OFFSET,
 		.bit = BIT(3),
 	},
+	{
+		.label = "conf",
+		.capability = MLXPLAT_CPLD_LPC_REG_TACHO_SPEED_OFFSET,
+	},
 };
 
 static struct mlxreg_core_platform_data mlxplat_default_fan_data = {
@@ -1346,6 +1375,148 @@ static struct mlxreg_core_platform_data mlxplat_default_fan_data = {
 		.counter = ARRAY_SIZE(mlxplat_mlxcpld_default_fan_data),
 };
 
+/* Watchdog type1: hardware implementation version1
+ * (MSN2700, MSN2410, MSN2740, MSN2100 and MSN2140 systems).
+ */
+static struct mlxreg_core_data mlxplat_mlxcpld_wd_main_regs_type1[] = {
+	{
+		.label = "action",
+		.reg = MLXPLAT_CPLD_LPC_REG_WD1_ACT_OFFSET,
+		.mask = MLXPLAT_CPLD_WD_RESET_ACT_MASK,
+		.bit = 0,
+	},
+	{
+		.label = "timeout",
+		.reg = MLXPLAT_CPLD_LPC_REG_WD1_TMR_OFFSET,
+		.mask = MLXPLAT_CPLD_WD_TYPE1_TO_MASK,
+		.health_cntr = MLXPLAT_CPLD_WD_DFLT_TIMEOUT,
+	},
+	{
+		.label = "ping",
+		.reg = MLXPLAT_CPLD_LPC_REG_WD_CLEAR_OFFSET,
+		.mask = MLXPLAT_CPLD_WD1_CLEAR_MASK,
+		.bit = 0,
+	},
+	{
+		.label = "reset",
+		.reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET,
+		.mask = GENMASK(7, 0) & ~BIT(6),
+		.bit = 6,
+	},
+};
+
+static struct mlxreg_core_data mlxplat_mlxcpld_wd_aux_regs_type1[] = {
+	{
+		.label = "action",
+		.reg = MLXPLAT_CPLD_LPC_REG_WD2_ACT_OFFSET,
+		.mask = MLXPLAT_CPLD_WD_FAN_ACT_MASK,
+		.bit = 4,
+	},
+	{
+		.label = "timeout",
+		.reg = MLXPLAT_CPLD_LPC_REG_WD2_TMR_OFFSET,
+		.mask = MLXPLAT_CPLD_WD_TYPE1_TO_MASK,
+		.health_cntr = MLXPLAT_CPLD_WD_DFLT_TIMEOUT,
+	},
+	{
+		.label = "ping",
+		.reg = MLXPLAT_CPLD_LPC_REG_WD_CLEAR_OFFSET,
+		.mask = MLXPLAT_CPLD_WD1_CLEAR_MASK,
+		.bit = 1,
+	},
+};
+
+static struct mlxreg_core_platform_data mlxplat_mlxcpld_wd_set_type1[] = {
+	{
+		.data = mlxplat_mlxcpld_wd_main_regs_type1,
+		.counter = ARRAY_SIZE(mlxplat_mlxcpld_wd_main_regs_type1),
+		.version = MLX_WDT_TYPE1,
+		.identity = "mlx-wdt-main",
+	},
+	{
+		.data = mlxplat_mlxcpld_wd_aux_regs_type1,
+		.counter = ARRAY_SIZE(mlxplat_mlxcpld_wd_aux_regs_type1),
+		.version = MLX_WDT_TYPE1,
+		.identity = "mlx-wdt-aux",
+	},
+};
+
+/* Watchdog type2: hardware implementation version 2
+ * (all systems except (MSN2700, MSN2410, MSN2740, MSN2100 and MSN2140).
+ */
+static struct mlxreg_core_data mlxplat_mlxcpld_wd_main_regs_type2[] = {
+	{
+		.label = "action",
+		.reg = MLXPLAT_CPLD_LPC_REG_WD2_ACT_OFFSET,
+		.mask = MLXPLAT_CPLD_WD_RESET_ACT_MASK,
+		.bit = 0,
+	},
+	{
+		.label = "timeout",
+		.reg = MLXPLAT_CPLD_LPC_REG_WD2_TMR_OFFSET,
+		.mask = MLXPLAT_CPLD_WD_TYPE2_TO_MASK,
+		.health_cntr = MLXPLAT_CPLD_WD_DFLT_TIMEOUT,
+	},
+	{
+		.label = "timeleft",
+		.reg = MLXPLAT_CPLD_LPC_REG_WD2_TLEFT_OFFSET,
+		.mask = MLXPLAT_CPLD_WD_TYPE2_TO_MASK,
+	},
+	{
+		.label = "ping",
+		.reg = MLXPLAT_CPLD_LPC_REG_WD2_ACT_OFFSET,
+		.mask = MLXPLAT_CPLD_WD_RESET_ACT_MASK,
+		.bit = 0,
+	},
+	{
+		.label = "reset",
+		.reg = MLXPLAT_CPLD_LPC_REG_RESET_CAUSE_OFFSET,
+		.mask = GENMASK(7, 0) & ~BIT(6),
+		.bit = 6,
+	},
+};
+
+static struct mlxreg_core_data mlxplat_mlxcpld_wd_aux_regs_type2[] = {
+	{
+		.label = "action",
+		.reg = MLXPLAT_CPLD_LPC_REG_WD3_ACT_OFFSET,
+		.mask = MLXPLAT_CPLD_WD_FAN_ACT_MASK,
+		.bit = 4,
+	},
+	{
+		.label = "timeout",
+		.reg = MLXPLAT_CPLD_LPC_REG_WD3_TMR_OFFSET,
+		.mask = MLXPLAT_CPLD_WD_TYPE2_TO_MASK,
+		.health_cntr = MLXPLAT_CPLD_WD_DFLT_TIMEOUT,
+	},
+	{
+		.label = "timeleft",
+		.reg = MLXPLAT_CPLD_LPC_REG_WD3_TLEFT_OFFSET,
+		.mask = MLXPLAT_CPLD_WD_TYPE2_TO_MASK,
+	},
+	{
+		.label = "ping",
+		.reg = MLXPLAT_CPLD_LPC_REG_WD3_ACT_OFFSET,
+		.mask = MLXPLAT_CPLD_WD_FAN_ACT_MASK,
+		.bit = 4,
+	},
+};
+
+static struct mlxreg_core_platform_data mlxplat_mlxcpld_wd_set_type2[] = {
+	{
+		.data = mlxplat_mlxcpld_wd_main_regs_type2,
+		.counter = ARRAY_SIZE(mlxplat_mlxcpld_wd_main_regs_type2),
+		.version = MLX_WDT_TYPE2,
+		.identity = "mlx-wdt-main",
+	},
+	{
+		.data = mlxplat_mlxcpld_wd_aux_regs_type2,
+		.counter = ARRAY_SIZE(mlxplat_mlxcpld_wd_aux_regs_type2),
+		.version = MLX_WDT_TYPE2,
+		.identity = "mlx-wdt-aux",
+	},
+};
+
 static bool mlxplat_mlxcpld_writeable_reg(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
@@ -1368,6 +1539,14 @@ static bool mlxplat_mlxcpld_writeable_reg(struct device *dev, unsigned int reg)
 	case MLXPLAT_CPLD_LPC_REG_PWR_MASK_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_FAN_EVENT_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_FAN_MASK_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD_CLEAR_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD_CLEAR_WP_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD1_TMR_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD1_ACT_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD2_TMR_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD2_ACT_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD3_TMR_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD3_ACT_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_PWM1_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_PWM_CONTROL_OFFSET:
 		return true;
@@ -1411,6 +1590,16 @@ static bool mlxplat_mlxcpld_readable_reg(struct device *dev, unsigned int reg)
 	case MLXPLAT_CPLD_LPC_REG_FAN_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_FAN_EVENT_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_FAN_MASK_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD_CLEAR_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD_CLEAR_WP_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD1_TMR_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD1_ACT_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD2_TMR_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD2_TLEFT_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD2_ACT_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD3_TMR_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD3_TLEFT_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD3_ACT_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_PWM1_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_TACHO1_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_TACHO2_OFFSET:
@@ -1428,6 +1617,7 @@ static bool mlxplat_mlxcpld_readable_reg(struct device *dev, unsigned int reg)
 	case MLXPLAT_CPLD_LPC_REG_FAN_CAP1_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_FAN_CAP2_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_TACHO_SPEED_OFFSET:
 		return true;
 	}
 	return false;
@@ -1467,6 +1657,10 @@ static bool mlxplat_mlxcpld_volatile_reg(struct device *dev, unsigned int reg)
 	case MLXPLAT_CPLD_LPC_REG_FAN_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_FAN_EVENT_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_FAN_MASK_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD2_TMR_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD2_TLEFT_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD3_TMR_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_WD3_TLEFT_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_PWM1_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_TACHO1_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_TACHO2_OFFSET:
@@ -1484,6 +1678,7 @@ static bool mlxplat_mlxcpld_volatile_reg(struct device *dev, unsigned int reg)
 	case MLXPLAT_CPLD_LPC_REG_FAN_CAP1_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_FAN_CAP2_OFFSET:
 	case MLXPLAT_CPLD_LPC_REG_FAN_DRW_CAP_OFFSET:
+	case MLXPLAT_CPLD_LPC_REG_TACHO_SPEED_OFFSET:
 		return true;
 	}
 	return false;
@@ -1493,6 +1688,7 @@ static const struct reg_default mlxplat_mlxcpld_regmap_default[] = {
 	{ MLXPLAT_CPLD_LPC_REG_WP1_OFFSET, 0x00 },
 	{ MLXPLAT_CPLD_LPC_REG_WP2_OFFSET, 0x00 },
 	{ MLXPLAT_CPLD_LPC_REG_PWM_CONTROL_OFFSET, 0x00 },
+	{ MLXPLAT_CPLD_LPC_REG_WD_CLEAR_WP_OFFSET, 0x00 },
 };
 
 struct mlxplat_mlxcpld_regmap_context {
@@ -1542,6 +1738,8 @@ static struct mlxreg_core_hotplug_platform_data *mlxplat_hotplug;
 static struct mlxreg_core_platform_data *mlxplat_led;
 static struct mlxreg_core_platform_data *mlxplat_regs_io;
 static struct mlxreg_core_platform_data *mlxplat_fan;
+static struct mlxreg_core_platform_data
+	*mlxplat_wd_data[MLXPLAT_CPLD_WD_MAX_DEVS];
 
 static int __init mlxplat_dmi_default_matched(const struct dmi_system_id *dmi)
 {
@@ -1557,6 +1755,7 @@ static int __init mlxplat_dmi_default_matched(const struct dmi_system_id *dmi)
 		mlxplat_default_channels[i - 1][MLXPLAT_CPLD_GRP_CHNL_NUM - 1];
 	mlxplat_led = &mlxplat_default_led_data;
 	mlxplat_regs_io = &mlxplat_default_regs_io_data;
+	mlxplat_wd_data[0] = &mlxplat_mlxcpld_wd_set_type1[0];
 
 	return 1;
 };
@@ -1575,6 +1774,7 @@ static int __init mlxplat_dmi_msn21xx_matched(const struct dmi_system_id *dmi)
 		mlxplat_msn21xx_channels[MLXPLAT_CPLD_GRP_CHNL_NUM - 1];
 	mlxplat_led = &mlxplat_msn21xx_led_data;
 	mlxplat_regs_io = &mlxplat_msn21xx_regs_io_data;
+	mlxplat_wd_data[0] = &mlxplat_mlxcpld_wd_set_type1[0];
 
 	return 1;
 };
@@ -1593,6 +1793,7 @@ static int __init mlxplat_dmi_msn274x_matched(const struct dmi_system_id *dmi)
 		mlxplat_msn21xx_channels[MLXPLAT_CPLD_GRP_CHNL_NUM - 1];
 	mlxplat_led = &mlxplat_default_led_data;
 	mlxplat_regs_io = &mlxplat_msn21xx_regs_io_data;
+	mlxplat_wd_data[0] = &mlxplat_mlxcpld_wd_set_type1[0];
 
 	return 1;
 };
@@ -1611,6 +1812,7 @@ static int __init mlxplat_dmi_msn201x_matched(const struct dmi_system_id *dmi)
 		mlxplat_default_channels[i - 1][MLXPLAT_CPLD_GRP_CHNL_NUM - 1];
 	mlxplat_led = &mlxplat_msn21xx_led_data;
 	mlxplat_regs_io = &mlxplat_msn21xx_regs_io_data;
+	mlxplat_wd_data[0] = &mlxplat_mlxcpld_wd_set_type1[0];
 
 	return 1;
 };
@@ -1630,6 +1832,8 @@ static int __init mlxplat_dmi_qmb7xx_matched(const struct dmi_system_id *dmi)
 	mlxplat_led = &mlxplat_default_ng_led_data;
 	mlxplat_regs_io = &mlxplat_default_ng_regs_io_data;
 	mlxplat_fan = &mlxplat_default_fan_data;
+	for (i = 0; i < ARRAY_SIZE(mlxplat_mlxcpld_wd_set_type2); i++)
+		mlxplat_wd_data[i] = &mlxplat_mlxcpld_wd_set_type2[i];
 
 	return 1;
 };
@@ -1912,15 +2116,33 @@ static int __init mlxplat_init(void)
 		}
 	}
 
+	/* Add WD drivers. */
+	for (j = 0; j < MLXPLAT_CPLD_WD_MAX_DEVS; j++) {
+		if (mlxplat_wd_data[j]) {
+			mlxplat_wd_data[j]->regmap = mlxplat_hotplug->regmap;
+			priv->pdev_wd[j] = platform_device_register_resndata(
+						&mlxplat_dev->dev, "mlx-wdt",
+						j, NULL, 0,
+						mlxplat_wd_data[j],
+						sizeof(*mlxplat_wd_data[j]));
+			if (IS_ERR(priv->pdev_wd[j])) {
+				err = PTR_ERR(priv->pdev_wd[j]);
+				goto fail_platform_wd_register;
+			}
+		}
+	}
+
 	/* Sync registers with hardware. */
 	regcache_mark_dirty(mlxplat_hotplug->regmap);
 	err = regcache_sync(mlxplat_hotplug->regmap);
 	if (err)
-		goto fail_platform_fan_register;
+		goto fail_platform_wd_register;
 
 	return 0;
 
-fail_platform_fan_register:
+fail_platform_wd_register:
+	while (--j >= 0)
+		platform_device_unregister(priv->pdev_wd[j]);
 	if (mlxplat_fan)
 		platform_device_unregister(priv->pdev_fan);
 fail_platform_io_regs_register:
@@ -1946,6 +2168,8 @@ static void __exit mlxplat_exit(void)
 	struct mlxplat_priv *priv = platform_get_drvdata(mlxplat_dev);
 	int i;
 
+	for (i = MLXPLAT_CPLD_WD_MAX_DEVS - 1; i >= 0 ; i--)
+		platform_device_unregister(priv->pdev_wd[i]);
 	if (priv->pdev_fan)
 		platform_device_unregister(priv->pdev_fan);
 	if (priv->pdev_io_regs)

drivers/platform/x86/sony-laptop.c

@@ -4424,14 +4424,16 @@ sony_pic_read_possible_resource(struct acpi_resource *resource, void *context)
 			}
 			return AE_OK;
 		}
+
+	case ACPI_RESOURCE_TYPE_END_TAG:
+		return AE_OK;
+
 	default:
 		dprintk("Resource %d isn't an IRQ nor an IO port\n",
 			resource->type);
+		return AE_CTRL_TERMINATE;
 
-	case ACPI_RESOURCE_TYPE_END_TAG:
-		return AE_OK;
 	}
-	return AE_CTRL_TERMINATE;
 }
 
 static int sony_pic_possible_resources(struct acpi_device *device)

drivers/platform/x86/thinkpad_acpi.c

@@ -79,7 +79,7 @@
 #include <linux/jiffies.h>
 #include <linux/workqueue.h>
 #include <linux/acpi.h>
-#include <linux/pci_ids.h>
+#include <linux/pci.h>
 #include <linux/power_supply.h>
 #include <sound/core.h>
 #include <sound/control.h>
@@ -4212,7 +4212,7 @@ static void hotkey_notify(struct ibm_struct *ibm, u32 event)
 				known_ev = true;
 				break;
 			}
-			/* fallthrough to default */
+			/* fallthrough - to default */
 		default:
 			known_ev = false;
 		}
@@ -4501,6 +4501,74 @@ static void bluetooth_exit(void)
 	bluetooth_shutdown();
 }
 
+static const struct dmi_system_id bt_fwbug_list[] __initconst = {
+	{
+		.ident = "ThinkPad E485",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "20KU"),
+		},
+	},
+	{
+		.ident = "ThinkPad E585",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "20KV"),
+		},
+	},
+	{
+		.ident = "ThinkPad A285 - 20MW",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "20MW"),
+		},
+	},
+	{
+		.ident = "ThinkPad A285 - 20MX",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "20MX"),
+		},
+	},
+	{
+		.ident = "ThinkPad A485 - 20MU",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "20MU"),
+		},
+	},
+	{
+		.ident = "ThinkPad A485 - 20MV",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_BOARD_NAME, "20MV"),
+		},
+	},
+	{}
+};
+
+static const struct pci_device_id fwbug_cards_ids[] __initconst = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x24F3) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x24FD) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2526) },
+	{}
+};
+
+
+static int __init have_bt_fwbug(void)
+{
+	/*
+	 * Some AMD based ThinkPads have a firmware bug that calling
+	 * "GBDC" will cause bluetooth on Intel wireless cards blocked
+	 */
+	if (dmi_check_system(bt_fwbug_list) && pci_dev_present(fwbug_cards_ids)) {
+		vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_RFKILL,
+			FW_BUG "disable bluetooth subdriver for Intel cards\n");
+		return 1;
+	} else
+		return 0;
+}
+
 static int __init bluetooth_init(struct ibm_init_struct *iibm)
 {
 	int res;
@@ -4513,7 +4581,7 @@ static int __init bluetooth_init(struct ibm_init_struct *iibm)
 
 	/* bluetooth not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
 	   G4x, R30, R31, R40e, R50e, T20-22, X20-21 */
-	tp_features.bluetooth = hkey_handle &&
+	tp_features.bluetooth = !have_bt_fwbug() && hkey_handle &&
 	    acpi_evalf(hkey_handle, &status, "GBDC", "qd");
 
 	vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_RFKILL,
@@ -5808,7 +5876,7 @@ static int led_set_status(const unsigned int led,
 			return -EPERM;
 		if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
 				(1 << led), led_sled_arg1[ledstatus]))
-			rc = -EIO;
+			return -EIO;
 		break;
 	case TPACPI_LED_OLD:
 		/* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
@@ -5832,10 +5900,10 @@ static int led_set_status(const unsigned int led,
 			return -EPERM;
 		if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
 				led, led_led_arg1[ledstatus]))
-			rc = -EIO;
+			return -EIO;
 		break;
 	default:
-		rc = -ENXIO;
+		return -ENXIO;
 	}
 
 	if (!rc)
@@ -6249,8 +6317,8 @@ static int thermal_get_sensor(int idx, s32 *value)
 			t = TP_EC_THERMAL_TMP8;
 			idx -= 8;
 		}
-		/* fallthrough */
 #endif
+		/* fallthrough */
 	case TPACPI_THERMAL_TPEC_8:
 		if (idx <= 7) {
 			if (!acpi_ec_read(t + idx, &tmp))
@@ -9890,6 +9958,37 @@ static char __init tpacpi_parse_fw_id(const char * const s,
 	return '\0';
 }
 
+static void find_new_ec_fwstr(const struct dmi_header *dm, void *private)
+{
+	char *ec_fw_string = (char *) private;
+	const char *dmi_data = (const char *)dm;
+	/*
+	 * ThinkPad Embedded Controller Program Table on newer models
+	 *
+	 * Offset |  Name                | Width  | Description
+	 * ----------------------------------------------------
+	 *  0x00  | Type                 | BYTE   | 0x8C
+	 *  0x01  | Length               | BYTE   |
+	 *  0x02  | Handle               | WORD   | Varies
+	 *  0x04  | Signature            | BYTEx6 | ASCII for "LENOVO"
+	 *  0x0A  | OEM struct offset    | BYTE   | 0x0B
+	 *  0x0B  | OEM struct number    | BYTE   | 0x07, for this structure
+	 *  0x0C  | OEM struct revision  | BYTE   | 0x01, for this format
+	 *  0x0D  | ECP version ID       | STR ID |
+	 *  0x0E  | ECP release date     | STR ID |
+	 */
+
+	/* Return if data structure not match */
+	if (dm->type != 140 || dm->length < 0x0F ||
+	memcmp(dmi_data + 4, "LENOVO", 6) != 0 ||
+	dmi_data[0x0A] != 0x0B || dmi_data[0x0B] != 0x07 ||
+	dmi_data[0x0C] != 0x01)
+		return;
+
+	/* fwstr is the first 8byte string  */
+	strncpy(ec_fw_string, dmi_data + 0x0F, 8);
+}
+
 /* returns 0 - probe ok, or < 0 - probe error.
  * Probe ok doesn't mean thinkpad found.
  * On error, kfree() cleanup on tp->* is not performed, caller must do it */
@@ -9897,7 +9996,7 @@ static int __must_check __init get_thinkpad_model_data(
 						struct thinkpad_id_data *tp)
 {
 	const struct dmi_device *dev = NULL;
-	char ec_fw_string[18];
+	char ec_fw_string[18] = {0};
 	char const *s;
 	char t;
 
@@ -9937,20 +10036,25 @@ static int __must_check __init get_thinkpad_model_data(
 			   ec_fw_string) == 1) {
 			ec_fw_string[sizeof(ec_fw_string) - 1] = 0;
 			ec_fw_string[strcspn(ec_fw_string, " ]")] = 0;
+			break;
+		}
+	}
 
-			tp->ec_version_str = kstrdup(ec_fw_string, GFP_KERNEL);
-			if (!tp->ec_version_str)
-				return -ENOMEM;
+	/* Newer ThinkPads have different EC program info table */
+	if (!ec_fw_string[0])
+		dmi_walk(find_new_ec_fwstr, &ec_fw_string);
 
-			t = tpacpi_parse_fw_id(ec_fw_string,
-					       &tp->ec_model, &tp->ec_release);
-			if (t != 'H') {
-				pr_notice("ThinkPad firmware release %s doesn't match the known patterns\n",
-					  ec_fw_string);
-				pr_notice("please report this to %s\n",
-					  TPACPI_MAIL);
-			}
-			break;
+	if (ec_fw_string[0]) {
+		tp->ec_version_str = kstrdup(ec_fw_string, GFP_KERNEL);
+		if (!tp->ec_version_str)
+			return -ENOMEM;
+
+		t = tpacpi_parse_fw_id(ec_fw_string,
+			 &tp->ec_model, &tp->ec_release);
+		if (t != 'H') {
+			pr_notice("ThinkPad firmware release %s doesn't match the known patterns\n",
+				  ec_fw_string);
+			pr_notice("please report this to %s\n", TPACPI_MAIL);
 		}
 	}
 
@@ -10165,7 +10269,7 @@ MODULE_PARM_DESC(volume_mode,
 
 module_param_named(volume_capabilities, volume_capabilities, uint, 0444);
 MODULE_PARM_DESC(volume_capabilities,
-		 "Selects the mixer capabilites: 0=auto, 1=volume and mute, 2=mute only");
+		 "Selects the mixer capabilities: 0=auto, 1=volume and mute, 2=mute only");
 
 module_param_named(volume_control, volume_control_allowed, bool, 0444);
 MODULE_PARM_DESC(volume_control,

drivers/platform/x86/touchscreen_dmi.c

@@ -249,6 +249,21 @@ static const struct ts_dmi_data jumper_ezpad_6_pro_data = {
 	.properties	= jumper_ezpad_6_pro_props,
 };
 
+static const struct property_entry jumper_ezpad_6_pro_b_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1980),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1500),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-jumper-ezpad-6-pro-b.fw"),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data jumper_ezpad_6_pro_b_data = {
+	.acpi_name      = "MSSL1680:00",
+	.properties     = jumper_ezpad_6_pro_b_props,
+};
+
 static const struct property_entry jumper_ezpad_mini3_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-min-x", 23),
 	PROPERTY_ENTRY_U32("touchscreen-min-y", 16),
@@ -265,6 +280,23 @@ static const struct ts_dmi_data jumper_ezpad_mini3_data = {
 	.properties	= jumper_ezpad_mini3_props,
 };
 
+static const struct property_entry myria_my8307_props[] = {
+	PROPERTY_ENTRY_U32("touchscreen-size-x", 1720),
+	PROPERTY_ENTRY_U32("touchscreen-size-y", 1140),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
+	PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+	PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+	PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-myria-my8307.fw"),
+	PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+	PROPERTY_ENTRY_BOOL("silead,home-button"),
+	{ }
+};
+
+static const struct ts_dmi_data myria_my8307_data = {
+	.acpi_name	= "MSSL1680:00",
+	.properties	= myria_my8307_props,
+};
+
 static const struct property_entry onda_obook_20_plus_props[] = {
 	PROPERTY_ENTRY_U32("touchscreen-size-x", 1728),
 	PROPERTY_ENTRY_U32("touchscreen-size-y", 1148),
@@ -673,6 +705,17 @@ static const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_BIOS_DATE, "08/18/2017"),
 		},
 	},
+	{
+		/* Jumper EZpad 6 Pro B */
+		.driver_data = (void *)&jumper_ezpad_6_pro_b_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Jumper"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EZpad"),
+			DMI_MATCH(DMI_BIOS_VERSION, "5.12"),
+			/* Above matches are too generic, add bios-date match */
+			DMI_MATCH(DMI_BIOS_DATE, "04/24/2018"),
+		},
+	},
 	{
 		/* Jumper EZpad mini3 */
 		.driver_data = (void *)&jumper_ezpad_mini3_data,
@@ -690,6 +733,14 @@ static const struct dmi_system_id touchscreen_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "FlexBook edge11 - M-FBE11"),
 		},
 	},
+	{
+		/* Myria MY8307 */
+		.driver_data = (void *)&myria_my8307_data,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Complet Electro Serv"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MY8307"),
+		},
+	},
 	{
 		/* Onda oBook 20 Plus */
 		.driver_data = (void *)&onda_obook_20_plus_data,

include/linux/platform_data/x86/asus-wmi.h

@@ -67,6 +67,7 @@
 /* Input */
 #define ASUS_WMI_DEVID_TOUCHPAD		0x00100011
 #define ASUS_WMI_DEVID_TOUCHPAD_LED	0x00100012
+#define ASUS_WMI_DEVID_FNLOCK		0x00100023
 
 /* Fan, Thermal */
 #define ASUS_WMI_DEVID_THERMAL_CTRL	0x00110011