提交 75f8c1f6 编写于 作者: N Nicholas Bellinger 提交者: James Bottomley

[SCSI] tcm_qla2xxx: Add >= 24xx series fabric module for target-core

This patch adds support for tcm_qla2xxx fabric module for target-core
using the new qla_target.c LLD logic.  This includes support for explict
NodeACLs via configfs using tcm_qla2xxx_setup_nacl_from_rport() from libfc
struct fc_host->rports, and demo-mode support for virtual LUN=0 access.

This patch also adds support for using tcm_qla2xxx_lport->lport_fcport_map
and ->lport_loopid_map of btree_head32 to track struct se_node_acl pointers
for individual 24-bit Port ID and 16-bit Loop ID values w/ qla_target_template
->find_sess_by_s_id() and ->find_sess_by_loop_id() used in a number of
locations into the primary I/O dispatch logic in qla_target.c LLD code.

The main piece for FC Nexus setup is in tcm_qla2xxx_check_initiator_node_acl(),
which calls tcm_qla2xxx_set_sess_by_[s_id,loop_id]() to setup our
lport->lport_fcport_map and lport_loopid_map pointers respectively, and
register the new nexus with TCM via __transport_register_session().

(nab: Add qla_tgt_mgmt_cmd usage with TARGET_SCF_ACK_KREF during TMRs +
      change tcm_qla2xxx_nacl->nport_id to u32 (DanC))
(danc: tcm_qla2xxx: checking for NULL instead of IS_ERR())
(roland: Fix up v3.5 breakage for removal of transport_do_task_sg_chain +
         Add hook so qla_target code can shutdown sessions)
(steveh: Convert FC address map from flat array to btree)
(randy: fix qla2xxx printk format warnings for size_t)
(joern: Make most of tcm_qla2xxx static + remove unnecessary
        workqueue_struct prototypes + use WWN_SIZE instead of hard-coded
        constants)
Signed-off-by: NNicholas A. Bellinger <nab@linux-iscsi.org>
Signed-off-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NJames Bottomley <JBottomley@Parallels.com>
上级 2d70c103
......@@ -25,3 +25,12 @@ config SCSI_QLA_FC
Firmware images can be retrieved from:
ftp://ftp.qlogic.com/outgoing/linux/firmware/
config TCM_QLA2XXX
tristate "TCM_QLA2XXX fabric module for Qlogic 2xxx series target mode HBAs"
depends on SCSI_QLA_FC && TARGET_CORE
select LIBFC
select BTREE
default n
---help---
Say Y here to enable the TCM_QLA2XXX fabric module for Qlogic 2xxx series target mode HBAs
......@@ -3,3 +3,4 @@ qla2xxx-y := qla_os.o qla_init.o qla_mbx.o qla_iocb.o qla_isr.o qla_gs.o \
qla_nx.o qla_target.o
obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx.o
obj-$(CONFIG_TCM_QLA2XXX) += tcm_qla2xxx.o
此差异已折叠。
#include <target/target_core_base.h>
#include <linux/btree.h>
#define TCM_QLA2XXX_VERSION "v0.1"
/* length of ASCII WWPNs including pad */
#define TCM_QLA2XXX_NAMELEN 32
/* lenth of ASCII NPIV 'WWPN+WWNN' including pad */
#define TCM_QLA2XXX_NPIV_NAMELEN 66
#include "qla_target.h"
struct tcm_qla2xxx_nacl {
/* From libfc struct fc_rport->port_id */
u32 nport_id;
/* Binary World Wide unique Node Name for remote FC Initiator Nport */
u64 nport_wwnn;
/* ASCII formatted WWPN for FC Initiator Nport */
char nport_name[TCM_QLA2XXX_NAMELEN];
/* Pointer to qla_tgt_sess */
struct qla_tgt_sess *qla_tgt_sess;
/* Pointer to TCM FC nexus */
struct se_session *nport_nexus;
/* Returned by tcm_qla2xxx_make_nodeacl() */
struct se_node_acl se_node_acl;
};
struct tcm_qla2xxx_tpg_attrib {
int generate_node_acls;
int cache_dynamic_acls;
int demo_mode_write_protect;
int prod_mode_write_protect;
};
struct tcm_qla2xxx_tpg {
/* FC lport target portal group tag for TCM */
u16 lport_tpgt;
/* Atomic bit to determine TPG active status */
atomic_t lport_tpg_enabled;
/* Pointer back to tcm_qla2xxx_lport */
struct tcm_qla2xxx_lport *lport;
/* Used by tcm_qla2xxx_tpg_attrib_cit */
struct tcm_qla2xxx_tpg_attrib tpg_attrib;
/* Returned by tcm_qla2xxx_make_tpg() */
struct se_portal_group se_tpg;
};
#define QLA_TPG_ATTRIB(tpg) (&(tpg)->tpg_attrib)
struct tcm_qla2xxx_fc_loopid {
struct se_node_acl *se_nacl;
};
struct tcm_qla2xxx_lport {
/* SCSI protocol the lport is providing */
u8 lport_proto_id;
/* Binary World Wide unique Port Name for FC Target Lport */
u64 lport_wwpn;
/* Binary World Wide unique Port Name for FC NPIV Target Lport */
u64 lport_npiv_wwpn;
/* Binary World Wide unique Node Name for FC NPIV Target Lport */
u64 lport_npiv_wwnn;
/* ASCII formatted WWPN for FC Target Lport */
char lport_name[TCM_QLA2XXX_NAMELEN];
/* ASCII formatted WWPN+WWNN for NPIV FC Target Lport */
char lport_npiv_name[TCM_QLA2XXX_NPIV_NAMELEN];
/* map for fc_port pointers in 24-bit FC Port ID space */
struct btree_head32 lport_fcport_map;
/* vmalloc-ed memory for fc_port pointers for 16-bit FC loop ID */
struct tcm_qla2xxx_fc_loopid *lport_loopid_map;
/* Pointer to struct scsi_qla_host from qla2xxx LLD */
struct scsi_qla_host *qla_vha;
/* Pointer to struct scsi_qla_host for NPIV VP from qla2xxx LLD */
struct scsi_qla_host *qla_npiv_vp;
/* Pointer to struct qla_tgt pointer */
struct qla_tgt lport_qla_tgt;
/* Pointer to struct fc_vport for NPIV vport from libfc */
struct fc_vport *npiv_vport;
/* Pointer to TPG=1 for non NPIV mode */
struct tcm_qla2xxx_tpg *tpg_1;
/* Returned by tcm_qla2xxx_make_lport() */
struct se_wwn lport_wwn;
};
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册