提交 75aa3f63 编写于 作者: V Ville Syrjälä

drm/i915: Turn __raw_i915_read8() & co. in to inline functions

There's no need for __raw_i915_read8() & co. to be macros, so make them
inline functions. To avoid typo mistakes generate the inline functions
using preprocessor templates.

We have a few users of the raw register acces functions outside
intel_uncore.c, so let's also move the functions into intel_drv.h.

While doing that switch I915_READ_FW() & co. to use the
__raw_i915_read() functions, and use the _FW macros everywhere
outside intel_uncore.c where we want to read registers without
grabbing forcewake and whatnot. The only exception is
i915_check_vgpu() which itself gets called from intel_uncore.c,
so using the __raw_i915_read stuff there seems appropriate.

v2: Squash in the intel_uncore.c->i915_drv.h move
    Convert I915_READ_FW() to use __raw_i915_read(), and use
    I915_READ_FW() outside of intel_uncore.c (Chris)
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1445517300-28173-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
上级 9c8e1bdb
......@@ -1524,7 +1524,7 @@ static int gen6_drpc_info(struct seq_file *m)
seq_printf(m, "RC information accurate: %s\n", yesno(count < 51));
}
gt_core_status = readl(dev_priv->regs + GEN6_GT_CORE_STATUS);
gt_core_status = I915_READ_FW(GEN6_GT_CORE_STATUS);
trace_i915_reg_rw(false, GEN6_GT_CORE_STATUS, gt_core_status, 4, true);
rpmodectl1 = I915_READ(GEN6_RP_CONTROL);
......
......@@ -3453,6 +3453,32 @@ int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
#define POSTING_READ(reg) (void)I915_READ_NOTRACE(reg)
#define POSTING_READ16(reg) (void)I915_READ16_NOTRACE(reg)
#define __raw_read(x, s) \
static inline uint##x##_t __raw_i915_read##x(struct drm_i915_private *dev_priv, \
uint32_t reg) \
{ \
return read##s(dev_priv->regs + reg); \
}
#define __raw_write(x, s) \
static inline void __raw_i915_write##x(struct drm_i915_private *dev_priv, \
uint32_t reg, uint##x##_t val) \
{ \
write##s(val, dev_priv->regs + reg); \
}
__raw_read(8, b)
__raw_read(16, w)
__raw_read(32, l)
__raw_read(64, q)
__raw_write(8, b)
__raw_write(16, w)
__raw_write(32, l)
__raw_write(64, q)
#undef __raw_read
#undef __raw_write
/* These are untraced mmio-accessors that are only valid to be used inside
* criticial sections inside IRQ handlers where forcewake is explicitly
* controlled.
......@@ -3460,8 +3486,8 @@ int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
* Note: Should only be used between intel_uncore_forcewake_irqlock() and
* intel_uncore_forcewake_irqunlock().
*/
#define I915_READ_FW(reg__) readl(dev_priv->regs + (reg__))
#define I915_WRITE_FW(reg__, val__) writel(val__, dev_priv->regs + (reg__))
#define I915_READ_FW(reg__) __raw_i915_read32(dev_priv, (reg__))
#define I915_WRITE_FW(reg__, val__) __raw_i915_write32(dev_priv, (reg__), (val__))
#define POSTING_READ_FW(reg__) (void)I915_READ_FW(reg__)
/* "Broadcast RGB" property */
......
......@@ -717,9 +717,7 @@ static u32 g4x_get_vblank_counter(struct drm_device *dev, int pipe)
return I915_READ(PIPE_FRMCOUNT_G4X(pipe));
}
/* raw reads, only for fast reads of display block, no need for forcewake etc. */
#define __raw_i915_read32(dev_priv__, reg__) readl((dev_priv__)->regs + (reg__))
/* I915_READ_FW, only for fast reads of display block, no need for forcewake etc. */
static int __intel_get_crtc_scanline(struct intel_crtc *crtc)
{
struct drm_device *dev = crtc->base.dev;
......@@ -733,9 +731,9 @@ static int __intel_get_crtc_scanline(struct intel_crtc *crtc)
vtotal /= 2;
if (IS_GEN2(dev))
position = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN2;
position = I915_READ_FW(PIPEDSL(pipe)) & DSL_LINEMASK_GEN2;
else
position = __raw_i915_read32(dev_priv, PIPEDSL(pipe)) & DSL_LINEMASK_GEN3;
position = I915_READ_FW(PIPEDSL(pipe)) & DSL_LINEMASK_GEN3;
/*
* On HSW, the DSL reg (0x70000) appears to return 0 if we
......@@ -827,7 +825,7 @@ static int i915_get_crtc_scanoutpos(struct drm_device *dev, int pipe,
* We can split this into vertical and horizontal
* scanout position.
*/
position = (__raw_i915_read32(dev_priv, PIPEFRAMEPIXEL(pipe)) & PIPE_PIXEL_MASK) >> PIPE_PIXEL_SHIFT;
position = (I915_READ_FW(PIPEFRAMEPIXEL(pipe)) & PIPE_PIXEL_MASK) >> PIPE_PIXEL_SHIFT;
/* convert to pixel counts */
vbl_start *= htotal;
......
......@@ -69,13 +69,13 @@ void i915_check_vgpu(struct drm_device *dev)
if (!IS_HASWELL(dev))
return;
magic = readq(dev_priv->regs + vgtif_reg(magic));
magic = __raw_i915_read64(dev_priv, vgtif_reg(magic));
if (magic != VGT_MAGIC)
return;
version = INTEL_VGT_IF_VERSION_ENCODE(
readw(dev_priv->regs + vgtif_reg(version_major)),
readw(dev_priv->regs + vgtif_reg(version_minor)));
__raw_i915_read16(dev_priv, vgtif_reg(version_major)),
__raw_i915_read16(dev_priv, vgtif_reg(version_minor)));
if (version != INTEL_VGT_IF_VERSION) {
DRM_INFO("VGT interface version mismatch!\n");
return;
......
......@@ -29,19 +29,7 @@
#define FORCEWAKE_ACK_TIMEOUT_MS 50
#define __raw_i915_read8(dev_priv__, reg__) readb((dev_priv__)->regs + (reg__))
#define __raw_i915_write8(dev_priv__, reg__, val__) writeb(val__, (dev_priv__)->regs + (reg__))
#define __raw_i915_read16(dev_priv__, reg__) readw((dev_priv__)->regs + (reg__))
#define __raw_i915_write16(dev_priv__, reg__, val__) writew(val__, (dev_priv__)->regs + (reg__))
#define __raw_i915_read32(dev_priv__, reg__) readl((dev_priv__)->regs + (reg__))
#define __raw_i915_write32(dev_priv__, reg__, val__) writel(val__, (dev_priv__)->regs + (reg__))
#define __raw_i915_read64(dev_priv__, reg__) readq((dev_priv__)->regs + (reg__))
#define __raw_i915_write64(dev_priv__, reg__, val__) writeq(val__, (dev_priv__)->regs + (reg__))
#define __raw_posting_read(dev_priv__, reg__) (void)__raw_i915_read32(dev_priv__, reg__)
#define __raw_posting_read(dev_priv__, reg__) (void)__raw_i915_read32((dev_priv__), (reg__))
static const char * const forcewake_domain_names[] = {
"render",
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册