Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
提交 7561f2dd 编写于 作者: P Paul Mundt
浏览文件
操作

sh: Fix up SH7786 PCI resource definitions. 

This adds in some of the missing memory resources for channels 1/2 and
gets the code building again for the recent changes.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 13fd7aeb
隐藏空白更改
内联 并排
Showing with 63 addition and 87 deletion
arch/sh/drivers/pci/pcie-sh7786.c
浏览文件 @ 7561f2dd
/*
* Low-Level PCI Express Support for the SH7786
*
* Copyright (C) 2009 Paul Mundt
* Copyright (C) 2009 - 2010 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
......@@ -30,60 +30,84 @@ static struct sh7786_pcie_hwops {
int (*port_init_hw)(struct sh7786_pcie_port *port);
} *sh7786_pcie_hwops;
static struct resource sh7786_pci_32bit_mem_resources[] = {
static struct resource sh7786_pci0_resources[] = {
{
.name = "pci0_mem",
.start = SH4A_PCIMEM_BASEA,
.end = SH4A_PCIMEM_BASEA + SZ_64M - 1,
.flags = IORESOURCE_MEM,
.name = "PCIe0 IO",
.start = 0xfd000000,
.end = 0xfd000000 + SZ_8M - 1,
.flags = IORESOURCE_IO,
}, {
.name = "pci1_mem",
.start = SH4A_PCIMEM_BASEA1,
.end = SH4A_PCIMEM_BASEA1 + SZ_64M - 1,
.flags = IORESOURCE_MEM,
.name = "PCIe0 MEM 0",
.start = 0xc0000000,
.end = 0xc0000000 + SZ_512M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
}, {
.name = "pci2_mem",
.start = SH4A_PCIMEM_BASEA2,
.end = SH4A_PCIMEM_BASEA2 + SZ_64M - 1,
.name = "PCIe0 MEM 1",
.start = 0x10000000,
.end = 0x10000000 + SZ_64M - 1,
.flags = IORESOURCE_MEM,
}, {
.name = "PCIe0 MEM 2",
.start = 0xfe100000,
.end = 0xfe100000 + SZ_1M - 1,
},
};
static struct resource sh7786_pci_29bit_mem_resource = {
.start = SH4A_PCIMEM_BASE,
.end = SH4A_PCIMEM_BASE + SZ_64M - 1,
.flags = IORESOURCE_MEM,
static struct resource sh7786_pci1_resources[] = {
{
.name = "PCIe1 IO",
.start = 0xfd800000,
.end = 0xfd800000 + SZ_8M - 1,
.flags = IORESOURCE_IO,
}, {
.name = "PCIe1 MEM 0",
.start = 0xa0000000,
.end = 0xa0000000 + SZ_512M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
}, {
.name = "PCIe1 MEM 1",
.start = 0x30000000,
.end = 0x30000000 + SZ_256M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
}, {
.name = "PCIe1 MEM 2",
.start = 0xfe300000,
.end = 0xfe300000 + SZ_1M - 1,
},
};
static struct resource sh7786_pci_io_resources[] = {
static struct resource sh7786_pci2_resources[] = {
{
.name = "pci0_io",
.start = SH4A_PCIIO_BASE,
.end = SH4A_PCIIO_BASE + SZ_8M - 1,
.flags = IORESOURCE_IO,
.name = "PCIe2 IO",
.start = 0xfc800000,
.end = 0xfc800000 + SZ_4M - 1,
}, {
.name = "pci1_io",
.start = SH4A_PCIIO_BASE1,
.end = SH4A_PCIIO_BASE1 + SZ_8M - 1,
.flags = IORESOURCE_IO,
.name = "PCIe2 MEM 0",
.start = 0x80000000,
.end = 0x80000000 + SZ_512M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
}, {
.name = "pci2_io",
.start = SH4A_PCIIO_BASE2,
.end = SH4A_PCIIO_BASE2 + SZ_4M - 1,
.flags = IORESOURCE_IO,
.name = "PCIe2 MEM 1",
.start = 0x20000000,
.end = 0x20000000 + SZ_256M - 1,
.flags = IORESOURCE_MEM | IORESOURCE_MEM_32BIT,
}, {
.name = "PCIe2 MEM 2",
.start = 0xfcd00000,
.end = 0xfcd00000 + SZ_1M - 1,
},
};
extern struct pci_ops sh7786_pci_ops;
#define DEFINE_CONTROLLER(start, idx) \
{ \
.pci_ops = &sh7786_pci_ops, \
.reg_base = start, \
/* mem_resource filled in at probe time */ \
.mem_offset = 0, \
.io_resource = &sh7786_pci_io_resources[idx], \
.io_offset = 0, \
#define DEFINE_CONTROLLER(start, idx) \
{ \
.pci_ops = &sh7786_pci_ops, \
.resources = sh7786_pci##idx##_resources, \
.nr_resources = ARRAY_SIZE(sh7786_pci##idx##_resources), \
.reg_base = start, \
.mem_offset = 0, \
.io_offset = 0, \
}
static struct pci_channel sh7786_pci_channels[] = {
......@@ -330,17 +354,7 @@ static int __init sh7786_pcie_init(void)
port->index = i;
port->hose = sh7786_pci_channels + i;
port->hose->io_map_base = port->hose->io_resource->start;
/*
* Check if we are booting in 29 or 32-bit mode
*
* 32-bit mode provides each controller with its own
* memory window, while 29-bit mode uses a shared one.
*/
port->hose->mem_resource = test_mode_pin(MODE_PIN10) ?
&sh7786_pci_32bit_mem_resources[i] :
&sh7786_pci_29bit_mem_resource;
port->hose->io_map_base = port->hose->resources[0].start;
ret |= sh7786_pcie_hwops->port_init_hw(port);
}
......
arch/sh/drivers/pci/pcie-sh7786.h
浏览文件 @ 7561f2dd
......@@ -30,47 +30,9 @@
* for other(Max Payload Size=4096B,PCIIO_SIZE=8M)
*/
/* PCI0-0: PCI I/O space */
#define SH4A_PCIIO_BASE 0xFD000000 /* PCI I/O for controller 0 */
#define SH4A_PCIIO_BASE1 0xFD800000 /* PCI I/O for controller 1 (Rev1.14)*/
#define SH4A_PCIIO_BASE2 0xFC800000 /* PCI I/O for controller 2 (Rev1.171)*/
#define SH4A_PCIIO_SIZE64 0x00010000 /* PLX allows only 64K */
#define SH4A_PCIIO_SIZE 0x00800000 /* 8M */
#define SH4A_PCIIO_SIZE2 0x00400000 /* 4M (Rev1.171)*/
/* PCI0-1: PCI memory space 29-bit address */
#define SH4A_PCIMEM_BASE 0x10000000
#define SH4A_PCIMEM_SIZE 0x04000000 /* 64M */
/* PCI0-2: PCI memory space 32-bit address */
#define SH4A_PCIMEM_BASEA 0xC0000000 /* for controller 0 */
#define SH4A_PCIMEM_BASEA1 0xA0000000 /* for controller 1 (Rev1.14)*/
#define SH4A_PCIMEM_BASEA2 0x80000000 /* for controller 2 (Rev1.171)*/
#define SH4A_PCIMEM_SIZEA 0x20000000 /* 512M */
/* PCI0: PCI memory target transfer 32-bit address translation value(Rev1.11T)*/
#define SH4A_PCIBMSTR_TRANSLATION 0x20000000
#define SH4A_PCI_DEVICE_ID 0x0002
#define SH4A_PCI_VENDOR_ID 0x1912
// PCI compatible 000-03f
#define PCI_CMD 0x004
#define PCI_RID 0x008
#define PCI_IBAR 0x010
#define PCI_MBAR0 0x014
#define PCI_MBAR1 0x018
/* PCI power management/MSI/capablity 040-0ff */
/* PCIE extended 100-fff */
/* SH7786 device identification */ // Rev1.171
#define SH4A_PVR (0xFF000030)
#define SH4A_PVR_SHX3 (0x10400000)
#define SH4A_PRR (0xFF000044)
#define SH4A_PRR_SH7786 (0x00000400) // Rev1.171
/* SPVCR0 */
#define SH4A_PCIEVCR0 (0x000000) /* R - 0x0000 0000 32 */
#define BITS_TOP_MB (24)
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或