Merge branch 'hsilicon'

Zhangfei Gao says:

====================
add hix5hd2 mac driver

v4:
Update indent
Use usleep_range instead of udelay

v3:
Remove .ndo_get_stats as mentioned by Tobias
Add __le32 conversion pointed by Mark

v2:
Update binding accoring to Sergei comments
Update descriptor as Arnd's suggestion
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/hisilicon-hix5hd2-gmac.txt

+Hisilicon hix5hd2 gmac controller
+
+Required properties:
+- compatible: should be "hisilicon,hix5hd2-gmac".
+- reg: specifies base physical address(s) and size of the device registers.
+  The first region is the MAC register base and size.
+  The second region is external interface control register.
+- interrupts: should contain the MAC interrupt.
+- #address-cells: must be <1>.
+- #size-cells: must be <0>.
+- phy-mode: see ethernet.txt [1].
+- phy-handle: see ethernet.txt [1].
+- mac-address: see ethernet.txt [1].
+- clocks: clock phandle and specifier pair.
+
+- PHY subnode: inherits from phy binding [2]
+
+[1] Documentation/devicetree/bindings/net/ethernet.txt
+[2] Documentation/devicetree/bindings/net/phy.txt
+
+Example:
+	gmac0: ethernet@f9840000 {
+		compatible = "hisilicon,hix5hd2-gmac";
+		reg = <0xf9840000 0x1000>,<0xf984300c 0x4>;
+		interrupts = <0 71 4>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy-mode = "mii";
+		phy-handle = <&phy2>;
+		mac-address = [00 00 00 00 00 00];
+		clocks = <&clock HIX5HD2_MAC0_CLK>;
+
+		phy2: ethernet-phy@2 {
+			reg = <2>;
+		};
+	};

drivers/net/ethernet/Kconfig

@@ -67,6 +67,7 @@ source "drivers/net/ethernet/neterion/Kconfig"
 source "drivers/net/ethernet/faraday/Kconfig"
 source "drivers/net/ethernet/freescale/Kconfig"
 source "drivers/net/ethernet/fujitsu/Kconfig"
+source "drivers/net/ethernet/hisilicon/Kconfig"
 source "drivers/net/ethernet/hp/Kconfig"
 source "drivers/net/ethernet/ibm/Kconfig"
 source "drivers/net/ethernet/intel/Kconfig"

drivers/net/ethernet/Makefile

@@ -31,6 +31,7 @@ obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
 obj-$(CONFIG_NET_VENDOR_FARADAY) += faraday/
 obj-$(CONFIG_NET_VENDOR_FREESCALE) += freescale/
 obj-$(CONFIG_NET_VENDOR_FUJITSU) += fujitsu/
+obj-$(CONFIG_NET_VENDOR_HISILICON) += hisilicon/
 obj-$(CONFIG_NET_VENDOR_HP) += hp/
 obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
 obj-$(CONFIG_NET_VENDOR_INTEL) += intel/

drivers/net/ethernet/hisilicon/Kconfig

+#
+# HISILICON device configuration
+#
+
+config NET_VENDOR_HISILICON
+	bool "Hisilicon devices"
+	default y
+	depends on ARM
+	---help---
+	  If you have a network (Ethernet) card belonging to this class, say Y
+	  and read the Ethernet-HOWTO, available from
+	  <http://www.tldp.org/docs.html#howto>.
+
+	  Note that the answer to this question doesn't directly affect the
+	  kernel: saying N will just cause the configurator to skip all
+	  the questions about Hisilicon devices. If you say Y, you will be asked
+	  for your specific card in the following questions.
+
+if NET_VENDOR_HISILICON
+
+config HIX5HD2_GMAC
+	tristate "Hisilicon HIX5HD2 Family Network Device Support"
+	select PHYLIB
+	help
+	  This selects the hix5hd2 mac family network device.
+
+endif # NET_VENDOR_HISILICON

drivers/net/ethernet/hisilicon/Makefile

+#
+# Makefile for the HISILICON network device drivers.
+#
+
+obj-$(CONFIG_HIX5HD2_GMAC) += hix5hd2_gmac.o