提交 75146fc0 编写于 作者: C Clemens Ladisch 提交者: Jaroslav Kysela

[ALSA] oxygen: separate out hardware initialization code

Create separate functions for the code that initializes the hardware, as
opposed to initializing internal driver state, so that they can be
reused for resume support.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NJaroslav Kysela <perex@perex.cz>
上级 bbbfb552
......@@ -68,15 +68,22 @@ static void update_ak4396_volume(struct oxygen *chip)
ak4396_write(chip, AK4396_RCH_ATT, chip->dac_volume[1]);
}
static void hifier_init(struct oxygen *chip)
static void hifier_registers_init(struct oxygen *chip)
{
struct hifier_data *data = chip->model_data;
data->ak4396_ctl2 = AK4396_SMUTE | AK4396_DEM_OFF | AK4396_DFS_NORMAL;
ak4396_write(chip, AK4396_CONTROL_1, AK4396_DIF_24_MSB | AK4396_RSTN);
ak4396_write(chip, AK4396_CONTROL_2, data->ak4396_ctl2);
ak4396_write(chip, AK4396_CONTROL_3, AK4396_PCM);
update_ak4396_volume(chip);
}
static void hifier_init(struct oxygen *chip)
{
struct hifier_data *data = chip->model_data;
data->ak4396_ctl2 = AK4396_SMUTE | AK4396_DEM_OFF | AK4396_DFS_NORMAL;
hifier_registers_init(chip);
snd_component_add(chip->card, "AK4396");
snd_component_add(chip->card, "CS5340");
......
......@@ -124,12 +124,11 @@ static void update_ak4396_volume(struct oxygen *chip)
}
}
static void ak4396_init(struct oxygen *chip)
static void ak4396_registers_init(struct oxygen *chip)
{
struct generic_data *data = chip->model_data;
unsigned int i;
data->ak4396_ctl2 = AK4396_SMUTE | AK4396_DEM_OFF | AK4396_DFS_NORMAL;
for (i = 0; i < 4; ++i) {
ak4396_write(chip, i,
AK4396_CONTROL_1, AK4396_DIF_24_MSB | AK4396_RSTN);
......@@ -139,6 +138,14 @@ static void ak4396_init(struct oxygen *chip)
AK4396_CONTROL_3, AK4396_PCM);
}
update_ak4396_volume(chip);
}
static void ak4396_init(struct oxygen *chip)
{
struct generic_data *data = chip->model_data;
data->ak4396_ctl2 = AK4396_SMUTE | AK4396_DEM_OFF | AK4396_DFS_NORMAL;
ak4396_registers_init(chip);
snd_component_add(chip->card, "AK4396");
}
......@@ -149,18 +156,23 @@ static void ak5385_init(struct oxygen *chip)
snd_component_add(chip->card, "AK5385");
}
static void wm8785_init(struct oxygen *chip)
static void wm8785_registers_init(struct oxygen *chip)
{
struct generic_data *data = chip->model_data;
data->saved_wm8785_registers[0] = WM8785_MCR_SLAVE |
WM8785_OSR_SINGLE | WM8785_FORMAT_LJUST;
data->saved_wm8785_registers[1] = WM8785_WL_24;
wm8785_write(chip, WM8785_R7, 0);
wm8785_write(chip, WM8785_R0, data->saved_wm8785_registers[0]);
wm8785_write(chip, WM8785_R1, data->saved_wm8785_registers[1]);
}
static void wm8785_init(struct oxygen *chip)
{
struct generic_data *data = chip->model_data;
data->saved_wm8785_registers[0] = WM8785_MCR_SLAVE |
WM8785_OSR_SINGLE | WM8785_FORMAT_LJUST;
data->saved_wm8785_registers[1] = WM8785_WL_24;
wm8785_registers_init(chip);
snd_component_add(chip->card, "WM8785");
}
......
......@@ -204,15 +204,11 @@ static void update_pcm1796_mute(struct oxygen *chip)
pcm1796_write(chip, i, 18, value);
}
static void xonar_d2_init(struct oxygen *chip)
static void pcm1796_init(struct oxygen *chip)
{
struct xonar_data *data = chip->model_data;
unsigned int i;
data->anti_pop_delay = 300;
data->output_enable_bit = GPIO_D2_OUTPUT_ENABLE;
data->pcm1796_oversampling = PCM1796_OS_64;
for (i = 0; i < 4; ++i) {
pcm1796_write(chip, i, 19, PCM1796_FLT_SHARP | PCM1796_ATS_1);
pcm1796_write(chip, i, 20, data->pcm1796_oversampling);
......@@ -220,6 +216,17 @@ static void xonar_d2_init(struct oxygen *chip)
}
update_pcm1796_mute(chip); /* set ATLD before ATL/ATR */
update_pcm1796_volume(chip);
}
static void xonar_d2_init(struct oxygen *chip)
{
struct xonar_data *data = chip->model_data;
data->anti_pop_delay = 300;
data->output_enable_bit = GPIO_D2_OUTPUT_ENABLE;
data->pcm1796_oversampling = PCM1796_OS_64;
pcm1796_init(chip);
oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL, GPIO_D2_ALT);
oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, GPIO_D2_ALT);
......@@ -272,24 +279,10 @@ static void update_cs43xx_mute(struct oxygen *chip)
update_cs4362a_volumes(chip);
}
static void xonar_dx_init(struct oxygen *chip)
static void cs43xx_init(struct oxygen *chip)
{
struct xonar_data *data = chip->model_data;
data->anti_pop_delay = 800;
data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE;
data->ext_power_reg = OXYGEN_GPI_DATA;
data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
data->ext_power_bit = GPI_DX_EXT_POWER;
data->cs4398_fm = CS4398_FM_SINGLE | CS4398_DEM_NONE | CS4398_DIF_LJUST;
data->cs4362a_fm = CS4362A_FM_SINGLE |
CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L;
oxygen_write16(chip, OXYGEN_2WIRE_BUS_STATUS,
OXYGEN_2WIRE_LENGTH_8 |
OXYGEN_2WIRE_INTERRUPT_MASK |
OXYGEN_2WIRE_SPEED_FAST);
/* set CPEN (control port mode) and power down */
cs4398_write(chip, 8, CS4398_CPEN | CS4398_PDN);
cs4362a_write(chip, 0x01, CS4362A_PDN | CS4362A_CPEN);
......@@ -311,6 +304,27 @@ static void xonar_dx_init(struct oxygen *chip)
/* clear power down */
cs4398_write(chip, 8, CS4398_CPEN);
cs4362a_write(chip, 0x01, CS4362A_CPEN);
}
static void xonar_dx_init(struct oxygen *chip)
{
struct xonar_data *data = chip->model_data;
data->anti_pop_delay = 800;
data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE;
data->ext_power_reg = OXYGEN_GPI_DATA;
data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK;
data->ext_power_bit = GPI_DX_EXT_POWER;
data->cs4398_fm = CS4398_FM_SINGLE | CS4398_DEM_NONE | CS4398_DIF_LJUST;
data->cs4362a_fm = CS4362A_FM_SINGLE |
CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L;
oxygen_write16(chip, OXYGEN_2WIRE_BUS_STATUS,
OXYGEN_2WIRE_LENGTH_8 |
OXYGEN_2WIRE_INTERRUPT_MASK |
OXYGEN_2WIRE_SPEED_FAST);
cs43xx_init(chip);
oxygen_set_bits16(chip, OXYGEN_GPIO_CONTROL,
GPIO_DX_FRONT_PANEL | GPIO_DX_INPUT_ROUTE);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册