selftests: devlink_trap_l3_drops: Add test cases of irif and erif disabled

Add test cases to check that packets routed through disabled RIFs and
packets routed from disabled RIFs are dropped and devlink counters
increase when the action is trap.
Signed-off-by: NAmit Cohen <amitc@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tools/testing/selftests/drivers/net/mlxsw/devlink_trap_l3_drops.sh

@@ -50,6 +50,8 @@ ALL_TESTS="
 	ipv6_mc_dip_reserved_scope_test
 	ipv6_mc_dip_interface_local_scope_test
 	blackhole_route_test
+	irif_disabled_test
+	erif_disabled_test
 "
 
 NUM_NETIFS=4
@@ -553,6 +555,116 @@ blackhole_route_test()
 	__blackhole_route_test "6" "2001:db8:2::/120" "ipv6" $h2_ipv6 "icmpv6"
 }
 
+irif_disabled_test()
+{
+	local trap_name="irif_disabled"
+	local group_name="l3_drops"
+	local t0_packets t0_bytes
+	local t1_packets t1_bytes
+	local mz_pid
+
+	RET=0
+
+	ping_check $trap_name
+
+	devlink_trap_action_set $trap_name "trap"
+
+	# When RIF of a physical port ("Sub-port RIF") is destroyed, we first
+	# block the STP of the {Port, VLAN} so packets cannot get into the RIF.
+	# Using bridge enables us to see this trap because when bridge is
+	# destroyed, there is a small time window that packets can go into the
+	# RIF, while it is disabled.
+	ip link add dev br0 type bridge
+	ip link set dev $rp1 master br0
+	ip address flush dev $rp1
+	__addr_add_del br0 add 192.0.2.2/24
+	ip li set dev br0 up
+
+	t0_packets=$(devlink_trap_rx_packets_get $trap_name)
+	t0_bytes=$(devlink_trap_rx_bytes_get $trap_name)
+
+	# Generate packets to h2 through br0 RIF that will be removed later
+	$MZ $h1 -t udp "sp=54321,dp=12345" -c 0 -p 100 -a own -b $rp1mac \
+		-B $h2_ipv4 -q &
+	mz_pid=$!
+
+	# Wait before removing br0 RIF to allow packets to go into the bridge.
+	sleep 1
+
+	# Flushing address will dismantle the RIF
+	ip address flush dev br0
+
+	t1_packets=$(devlink_trap_rx_packets_get $trap_name)
+	t1_bytes=$(devlink_trap_rx_bytes_get $trap_name)
+
+	if [[ $t0_packets -eq $t1_packets && $t0_bytes -eq $t1_bytes ]]; then
+		check_err 1 "Trap stats idle when packets should be trapped"
+	fi
+
+	log_test "Ingress RIF disabled"
+
+	kill $mz_pid && wait $mz_pid &> /dev/null
+	ip link set dev $rp1 nomaster
+	__addr_add_del $rp1 add 192.0.2.2/24 2001:db8:1::2/64
+	ip link del dev br0 type bridge
+	devlink_trap_action_set $trap_name "drop"
+}
+
+erif_disabled_test()
+{
+	local trap_name="erif_disabled"
+	local group_name="l3_drops"
+	local t0_packets t0_bytes
+	local t1_packets t1_bytes
+	local mz_pid
+
+	RET=0
+
+	ping_check $trap_name
+
+	devlink_trap_action_set $trap_name "trap"
+	ip link add dev br0 type bridge
+	ip add flush dev $rp1
+	ip link set dev $rp1 master br0
+	__addr_add_del br0 add 192.0.2.2/24
+	ip link set dev br0 up
+
+	t0_packets=$(devlink_trap_rx_packets_get $trap_name)
+	t0_bytes=$(devlink_trap_rx_bytes_get $trap_name)
+
+	rp2mac=$(mac_get $rp2)
+
+	# Generate packets that should go out through br0 RIF that will be
+	# removed later
+	$MZ $h2 -t udp "sp=54321,dp=12345" -c 0 -p 100 -a own -b $rp2mac \
+		-B 192.0.2.1 -q &
+	mz_pid=$!
+
+	sleep 5
+	# In order to see this trap we need a route that points to disabled RIF.
+	# When ipv6 address is flushed, there is a delay and the routes are
+	# deleted before the RIF and we cannot get state that we have route
+	# to disabled RIF.
+	# Delete IPv6 address first and then check this trap with flushing IPv4.
+	ip -6 add flush dev br0
+	ip -4 add flush dev br0
+
+	t1_packets=$(devlink_trap_rx_packets_get $trap_name)
+	t1_bytes=$(devlink_trap_rx_bytes_get $trap_name)
+
+	if [[ $t0_packets -eq $t1_packets && $t0_bytes -eq $t1_bytes ]]; then
+		check_err 1 "Trap stats idle when packets should be trapped"
+	fi
+
+	log_test "Egress RIF disabled"
+
+	kill $mz_pid && wait $mz_pid &> /dev/null
+	ip link set dev $rp1 nomaster
+	__addr_add_del $rp1 add 192.0.2.2/24 2001:db8:1::2/64
+	ip link del dev br0 type bridge
+	devlink_trap_action_set $trap_name "drop"
+}
+
 trap cleanup EXIT
 
 setup_prepare