提交 74093ddf 编写于 作者: B Ben Cahill 提交者: David S. Miller

iwlwifi: clean up some unused definitions in iwl-4965.h and iwl-3945.h

Clean up some unused definitions in iwl-4965.h and iwl-3945.h

Move STA_FLG_ definitions to iwl-4965-commands.h
Signed-off-by: NBen Cahill <ben.m.cahill@intel.com>
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 1fea8e88
......@@ -191,14 +191,6 @@ struct iwl3945_scan_power_info {
s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */
};
/* Channel unlock period is 15 seconds. If no beacon or probe response
* has been received within 15 seconds on a locked channel then the channel
* remains locked. */
#define TX_UNLOCK_PERIOD 15
/* CSA lock period is 15 seconds. If a CSA has been received on a channel in
* the last 15 seconds, the channel is locked */
#define CSA_LOCK_PERIOD 15
/*
* One for each channel, holds all channel setup data
* Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
......@@ -560,19 +552,6 @@ struct iwl3945_driver_hw_info {
dma_addr_t shared_phys;
};
#define STA_FLG_RTS_MIMO_PROT_MSK __constant_cpu_to_le32(1 << 17)
#define STA_FLG_AGG_MPDU_8US_MSK __constant_cpu_to_le32(1 << 18)
#define STA_FLG_MAX_AGG_SIZE_POS (19)
#define STA_FLG_MAX_AGG_SIZE_MSK __constant_cpu_to_le32(3 << 19)
#define STA_FLG_FAT_EN_MSK __constant_cpu_to_le32(1 << 21)
#define STA_FLG_MIMO_DIS_MSK __constant_cpu_to_le32(1 << 22)
#define STA_FLG_AGG_MPDU_DENSITY_POS (23)
#define STA_FLG_AGG_MPDU_DENSITY_MSK __constant_cpu_to_le32(7 << 23)
#define HT_SHORT_GI_20MHZ_ONLY (1 << 0)
#define HT_SHORT_GI_40MHZ_ONLY (1 << 1)
#define IWL_RX_HDR(x) ((struct iwl3945_rx_frame_hdr *)(\
x->u.rx_frame.stats.payload + \
x->u.rx_frame.stats.phy_count))
......
......@@ -515,6 +515,14 @@ struct iwl4965_qosparam_cmd {
#define IWL_INVALID_STATION 255
#define STA_FLG_PWR_SAVE_MSK __constant_cpu_to_le32(1<<8);
#define STA_FLG_RTS_MIMO_PROT_MSK __constant_cpu_to_le32(1 << 17)
#define STA_FLG_AGG_MPDU_8US_MSK __constant_cpu_to_le32(1 << 18)
#define STA_FLG_MAX_AGG_SIZE_POS (19)
#define STA_FLG_MAX_AGG_SIZE_MSK __constant_cpu_to_le32(3 << 19)
#define STA_FLG_FAT_EN_MSK __constant_cpu_to_le32(1 << 21)
#define STA_FLG_MIMO_DIS_MSK __constant_cpu_to_le32(1 << 22)
#define STA_FLG_AGG_MPDU_DENSITY_POS (23)
#define STA_FLG_AGG_MPDU_DENSITY_MSK __constant_cpu_to_le32(7 << 23)
#define STA_CONTROL_MODIFY_MSK 0x01
......
......@@ -192,14 +192,6 @@ struct iwl4965_scan_power_info {
s8 requested_power; /* scan pwr (dBm) requested for chnl/rate */
};
/* Channel unlock period is 15 seconds. If no beacon or probe response
* has been received within 15 seconds on a locked channel then the channel
* remains locked. */
#define TX_UNLOCK_PERIOD 15
/* CSA lock period is 15 seconds. If a CSA has been received on a channel in
* the last 15 seconds, the channel is locked */
#define CSA_LOCK_PERIOD 15
/*
* One for each channel, holds all channel setup data
* Some of the fields (e.g. eeprom and flags/max_power_avg) are redundant
......@@ -620,15 +612,6 @@ struct iwl4965_driver_hw_info {
dma_addr_t shared_phys;
};
#define STA_FLG_RTS_MIMO_PROT_MSK __constant_cpu_to_le32(1 << 17)
#define STA_FLG_AGG_MPDU_8US_MSK __constant_cpu_to_le32(1 << 18)
#define STA_FLG_MAX_AGG_SIZE_POS (19)
#define STA_FLG_MAX_AGG_SIZE_MSK __constant_cpu_to_le32(3 << 19)
#define STA_FLG_FAT_EN_MSK __constant_cpu_to_le32(1 << 21)
#define STA_FLG_MIMO_DIS_MSK __constant_cpu_to_le32(1 << 22)
#define STA_FLG_AGG_MPDU_DENSITY_POS (23)
#define STA_FLG_AGG_MPDU_DENSITY_MSK __constant_cpu_to_le32(7 << 23)
#define HT_SHORT_GI_20MHZ_ONLY (1 << 0)
#define HT_SHORT_GI_40MHZ_ONLY (1 << 1)
......@@ -860,17 +843,8 @@ struct iwl4965_kw {
#define NRG_NUM_PREV_STAT_L 20
#define NUM_RX_CHAINS (3)
#define TX_POWER_IWL_ILLEGAL_VDET -100000
#define TX_POWER_IWL_ILLEGAL_VOLTAGE -10000
#define TX_POWER_IWL_CLOSED_LOOP_MIN_POWER 18
#define TX_POWER_IWL_CLOSED_LOOP_MAX_POWER 34
#define TX_POWER_IWL_VDET_SLOPE_BELOW_NOMINAL 17
#define TX_POWER_IWL_VDET_SLOPE_ABOVE_NOMINAL 20
#define TX_POWER_IWL_NOMINAL_POWER 26
#define TX_POWER_IWL_CLOSED_LOOP_ITERATION_LIMIT 1
#define TX_POWER_IWL_VOLTAGE_CODES_PER_03V 7
#define TX_POWER_IWL_DEGREES_PER_VDET_CODE 11
#define IWL_TX_POWER_MAX_NUM_PA_MEASUREMENTS 1
#define IWL_TX_POWER_CCK_COMPENSATION_B_STEP (9)
#define IWL_TX_POWER_CCK_COMPENSATION_C_STEP (5)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册