regulator: core: Add set_voltage_time op

The new op is analogous to set_voltage_time_sel. It can be used by
regulators which don't have a table of discrete voltages. The function
returns the time for the regulator output voltage to stabilize after
being set to a new value, in microseconds. If the op is not set a
default implementation is used to calculate the delay.

This change also removes the ramp_delay calculation in the PWM
regulator, since the driver now uses the core code for the calculation
of the delay.
Signed-off-by: NMatthias Kaehlcke <mka@chromium.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

drivers/regulator/core.c

@@ -2743,6 +2743,24 @@ static int _regulator_call_set_voltage_sel(struct regulator_dev *rdev,
 	return ret;
 }
 
+static int _regulator_set_voltage_time(struct regulator_dev *rdev,
+				       int old_uV, int new_uV)
+{
+	unsigned int ramp_delay = 0;
+
+	if (rdev->constraints->ramp_delay)
+		ramp_delay = rdev->constraints->ramp_delay;
+	else if (rdev->desc->ramp_delay)
+		ramp_delay = rdev->desc->ramp_delay;
+
+	if (ramp_delay == 0) {
+		rdev_warn(rdev, "ramp_delay not set\n");
+		return 0;
+	}
+
+	return DIV_ROUND_UP(abs(new_uV - old_uV), ramp_delay);
+}
+
 static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 				     int min_uV, int max_uV)
 {
@@ -2752,6 +2770,7 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 	unsigned int selector;
 	int old_selector = -1;
 	const struct regulator_ops *ops = rdev->desc->ops;
+	int old_uV = _regulator_get_voltage(rdev);
 
 	trace_regulator_set_voltage(rdev_get_name(rdev), min_uV, max_uV);
 
@@ -2803,23 +2822,37 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
 	if (ret)
 		goto out;
 
-	/* Call set_voltage_time_sel if successfully obtained old_selector */
-	if (!old_selector >= 0 && old_selector != selector) {
-		delay = ops->set_voltage_time_sel(rdev,
-						old_selector, selector);
-		if (delay < 0) {
-			rdev_warn(rdev, "set_voltage_time_sel() failed: %d\n",
-				  delay);
-			delay = 0;
+	if (ops->set_voltage_time_sel) {
+		/*
+		 * Call set_voltage_time_sel if successfully obtained
+		 * old_selector
+		 */
+		if (old_selector >= 0 && old_selector != selector)
+			delay = ops->set_voltage_time_sel(rdev, old_selector,
+							  selector);
+	} else {
+		if (old_uV != best_val) {
+			if (ops->set_voltage_time)
+				delay = ops->set_voltage_time(rdev, old_uV,
+							      best_val);
+			else
+				delay = _regulator_set_voltage_time(rdev,
+								    old_uV,
+								    best_val);
 		}
+	}
 
-		/* Insert any necessary delays */
-		if (delay >= 1000) {
-			mdelay(delay / 1000);
-			udelay(delay % 1000);
-		} else if (delay) {
-			udelay(delay);
-		}
+	if (delay < 0) {
+		rdev_warn(rdev, "failed to get delay: %d\n", delay);
+		delay = 0;
+	}
+
+	/* Insert any necessary delays */
+	if (delay >= 1000) {
+		mdelay(delay / 1000);
+		udelay(delay % 1000);
+	} else if (delay) {
+		udelay(delay);
 	}
 
 	if (best_val >= 0) {
@@ -3000,9 +3033,13 @@ int regulator_set_voltage_time(struct regulator *regulator,
 	int voltage;
 	int i;
 
+	if (ops->set_voltage_time)
+		return ops->set_voltage_time(rdev, old_uV, new_uV);
+	else if (!ops->set_voltage_time_sel)
+		return _regulator_set_voltage_time(rdev, old_uV, new_uV);
+
 	/* Currently requires operations to do this */
-	if (!ops->list_voltage || !ops->set_voltage_time_sel
-	    || !rdev->desc->n_voltages)
+	if (!ops->list_voltage || !rdev->desc->n_voltages)
 		return -EINVAL;
 
 	for (i = 0; i < rdev->desc->n_voltages; i++) {
@@ -3041,17 +3078,8 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
 				   unsigned int old_selector,
 				   unsigned int new_selector)
 {
-	unsigned int ramp_delay = 0;
 	int old_volt, new_volt;
 
-	if (rdev->constraints->ramp_delay)
-		ramp_delay = rdev->constraints->ramp_delay;
-	else if (rdev->desc->ramp_delay)
-		ramp_delay = rdev->desc->ramp_delay;
-
-	if (ramp_delay == 0)
-		return 0;
-
 	/* sanity check */
 	if (!rdev->desc->ops->list_voltage)
 		return -EINVAL;
@@ -3059,7 +3087,11 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
 	old_volt = rdev->desc->ops->list_voltage(rdev, old_selector);
 	new_volt = rdev->desc->ops->list_voltage(rdev, new_selector);
 
-	return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
+	if (rdev->desc->ops->set_voltage_time)
+		return rdev->desc->ops->set_voltage_time(rdev, old_volt,
+							 new_volt);
+	else
+		return _regulator_set_voltage_time(rdev, old_volt, new_volt);
 }
 EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel);
 

drivers/regulator/pwm-regulator.c

@@ -10,7 +10,6 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/delay.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/err.h>
@@ -194,12 +193,10 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
 	unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
 	unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
 	unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
-	unsigned int ramp_delay = rdev->constraints->ramp_delay;
 	int min_uV = rdev->constraints->min_uV;
 	int max_uV = rdev->constraints->max_uV;
 	int diff_uV = max_uV - min_uV;
 	struct pwm_state pstate;
-	int old_uV = pwm_regulator_get_voltage(rdev);
 	unsigned int diff_duty;
 	unsigned int dutycycle;
 	int ret;
@@ -233,13 +230,6 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
 		return ret;
 	}
 
-	if ((ramp_delay == 0) || !pwm_regulator_is_enabled(rdev))
-		return 0;
-
-	/* Ramp delay is in uV/uS. Adjust to uS and delay */
-	ramp_delay = DIV_ROUND_UP(abs(req_min_uV - old_uV), ramp_delay);
-	usleep_range(ramp_delay, ramp_delay + DIV_ROUND_UP(ramp_delay, 10));
-
 	return 0;
 }
 

include/linux/regulator/driver.h

@@ -113,10 +113,14 @@ struct regulator_linear_range {
  *               stabilise after being enabled, in microseconds.
  * @set_ramp_delay: Set the ramp delay for the regulator. The driver should
  *		select ramp delay equal to or less than(closest) ramp_delay.
+ * @set_voltage_time: Time taken for the regulator voltage output voltage
+ *               to stabilise after being set to a new value, in microseconds.
+ *               The function receives the from and to voltage as input, it
+ *               should return the worst case.
  * @set_voltage_time_sel: Time taken for the regulator voltage output voltage
  *               to stabilise after being set to a new value, in microseconds.
- *               The function provides the from and to voltage selector, the
- *               function should return the worst case.
+ *               The function receives the from and to voltage selector as
+ *               input, it should return the worst case.
  * @set_soft_start: Enable soft start for the regulator.
  *
  * @set_suspend_voltage: Set the voltage for the regulator when the system
@@ -168,6 +172,8 @@ struct regulator_ops {
 	/* Time taken to enable or set voltage on the regulator */
 	int (*enable_time) (struct regulator_dev *);
 	int (*set_ramp_delay) (struct regulator_dev *, int ramp_delay);
+	int (*set_voltage_time) (struct regulator_dev *, int old_uV,
+				 int new_uV);
 	int (*set_voltage_time_sel) (struct regulator_dev *,
 				     unsigned int old_selector,
 				     unsigned int new_selector);