提交 73e6991a 编写于 作者: H Harro Haan 提交者: John W. Linville

add Marvell 88W8688 support to libertas_sdio

This chip is for example used in the GuruPlug.
This patch avoids the following error:
libertas_sdio: failed to load firmware
libertas_sdio: probe of mmc0:0001:1 failed with error -5

The fix is based on code in:
drivers/net/wireless/libertas_uap/uap_sdio_mmc.c

This file can for example be found on the following links:
http://www.xilka.com/sheeva/2.6/2.6.36/2.6.36.2/source/0002-Driver-for-Marvell-Libertas-8688-SDIO-micro-AP-suppo-2.6.35.patch
http://www.downloadsnewit.co.uk/kernel-v3.0.7/

I followed the following wiki to setup a working WiFi client mode
connection on the GuruPlug:
http://wiki.debian.org/libertasSigned-off-by: NHarro Haan <hrhaan@gmail.com>
Acked-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 158b42ed
......@@ -588,17 +588,38 @@ static int if_sdio_prog_real(struct if_sdio_card *card,
size = fw->size;
while (size) {
ret = if_sdio_wait_status(card, FW_DL_READY_STATUS);
if (ret)
goto release;
timeout = jiffies + HZ;
while (1) {
ret = if_sdio_wait_status(card, FW_DL_READY_STATUS);
if (ret)
goto release;
req_size = sdio_readb(card->func, IF_SDIO_RD_BASE, &ret);
if (ret)
goto release;
req_size = sdio_readb(card->func, IF_SDIO_RD_BASE,
&ret);
if (ret)
goto release;
req_size |= sdio_readb(card->func, IF_SDIO_RD_BASE + 1,
&ret) << 8;
if (ret)
goto release;
/*
* For SD8688 wait until the length is not 0, 1 or 2
* before downloading the first FW block,
* since BOOT code writes the register to indicate the
* helper/FW download winner,
* the value could be 1 or 2 (Func1 or Func2).
*/
if ((size != fw->size) || (req_size > 2))
break;
if (time_after(jiffies, timeout)) {
ret = -ETIMEDOUT;
goto release;
}
mdelay(1);
}
req_size |= sdio_readb(card->func, IF_SDIO_RD_BASE + 1, &ret) << 8;
if (ret)
goto release;
/*
lbs_deb_sdio("firmware wants %d bytes\n", (int)req_size);
*/
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册