Skip to content

K
Kernel

openeuler / Kernel
大约 1 年 前同步成功

通知 5
Star 0
Fork 0
K
Kernel

体验新版 GitCode，发现更多精彩内容 >>

提交 73872733 编写于 作者: D Dave Olson 提交者： Roland Dreier
浏览文件
操作

IB/ipath: Remove unused MDIO interface code 

This code has been unused for some time, but still had leftovers
from when it was used.

Signed-off-by: Dave Olson <dave.olson@qlogic.com
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
上级 2ec8e662
隐藏空白更改
内联 并排
Showing with 2 addition and 168 deletion
drivers/infiniband/hw/ipath/ipath_driver.c
浏览文件 @ 73872733
......@@ -1618,77 +1618,6 @@ int ipath_create_rcvhdrq(struct ipath_devdata *dd,
return ret;
}
int ipath_waitfor_complete(struct ipath_devdata *dd, ipath_kreg reg_id,
u64 bits_to_wait_for, u64 * valp)
{
unsigned long timeout;
u64 lastval, val;
int ret;
lastval = ipath_read_kreg64(dd, reg_id);
/* wait a ridiculously long time */
timeout = jiffies + msecs_to_jiffies(5);
do {
val = ipath_read_kreg64(dd, reg_id);
/* set so they have something, even on failures. */
*valp = val;
if ((val & bits_to_wait_for) == bits_to_wait_for) {
ret = 0;
break;
}
if (val != lastval)
ipath_cdbg(VERBOSE, "Changed from %llx to %llx, "
"waiting for %llx bits\n",
(unsigned long long) lastval,
(unsigned long long) val,
(unsigned long long) bits_to_wait_for);
cond_resched();
if (time_after(jiffies, timeout)) {
ipath_dbg("Didn't get bits %llx in register 0x%x, "
"got %llx\n",
(unsigned long long) bits_to_wait_for,
reg_id, (unsigned long long) *valp);
ret = -ENODEV;
break;
}
} while (1);
return ret;
}
/**
* ipath_waitfor_mdio_cmdready - wait for last command to complete
* @dd: the infinipath device
*
* Like ipath_waitfor_complete(), but we wait for the CMDVALID bit to go
* away indicating the last command has completed. It doesn't return data
*/
int ipath_waitfor_mdio_cmdready(struct ipath_devdata *dd)
{
unsigned long timeout;
u64 val;
int ret;
/* wait a ridiculously long time */
timeout = jiffies + msecs_to_jiffies(5);
do {
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_mdio);
if (!(val & IPATH_MDIO_CMDVALID)) {
ret = 0;
break;
}
cond_resched();
if (time_after(jiffies, timeout)) {
ipath_dbg("CMDVALID stuck in mdio reg? (%llx)\n",
(unsigned long long) val);
ret = -ENODEV;
break;
}
} while (1);
return ret;
}
/*
* Flush all sends that might be in the ready to send state, as well as any
......
drivers/infiniband/hw/ipath/ipath_iba6110.c
浏览文件 @ 73872733
......@@ -1274,8 +1274,7 @@ static void ipath_ht_init_hwerrors(struct ipath_devdata *dd)
val &= ~INFINIPATH_HWE_HTCMISCERR4;
/*
* PLL ignored because MDIO interface has a logic problem
* for reads, on Comstock and Ponderosa. BRINGUP
* PLL ignored because unused MDIO interface has a logic problem
*/
if (dd->ipath_boardrev == 4 || dd->ipath_boardrev == 9)
val &= ~INFINIPATH_HWE_SERDESPLLFAILED;
......@@ -1353,16 +1352,6 @@ static int ipath_ht_bringup_serdes(struct ipath_devdata *dd)
}
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
if (((val >> INFINIPATH_XGXS_MDIOADDR_SHIFT) &
INFINIPATH_XGXS_MDIOADDR_MASK) != 3) {
val &= ~(INFINIPATH_XGXS_MDIOADDR_MASK <<
INFINIPATH_XGXS_MDIOADDR_SHIFT);
/*
* we use address 3
*/
val |= 3ULL << INFINIPATH_XGXS_MDIOADDR_SHIFT;
change = 1;
}
if (val & INFINIPATH_XGXS_RESET) {
/* normally true after boot */
val &= ~INFINIPATH_XGXS_RESET;
......@@ -1398,21 +1387,6 @@ static int ipath_ht_bringup_serdes(struct ipath_devdata *dd)
(unsigned long long)
ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig));
if (!ipath_waitfor_mdio_cmdready(dd)) {
ipath_write_kreg(dd, dd->ipath_kregs->kr_mdio,
ipath_mdio_req(IPATH_MDIO_CMD_READ, 31,
IPATH_MDIO_CTRL_XGXS_REG_8,
0));
if (ipath_waitfor_complete(dd, dd->ipath_kregs->kr_mdio,
IPATH_MDIO_DATAVALID, &val))
ipath_dbg("Never got MDIO data for XGXS status "
"read\n");
else
ipath_cdbg(VERBOSE, "MDIO Read reg8, "
"'bank' 31 %x\n", (u32) val);
} else
ipath_dbg("Never got MDIO cmdready for XGXS status read\n");
return ret; /* for now, say we always succeeded */
}
......
drivers/infiniband/hw/ipath/ipath_iba6120.c
浏览文件 @ 73872733
......@@ -725,17 +725,8 @@ static int ipath_pe_bringup_serdes(struct ipath_devdata *dd)
val = ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig);
prev_val = val;
if (((val >> INFINIPATH_XGXS_MDIOADDR_SHIFT) &
INFINIPATH_XGXS_MDIOADDR_MASK) != 3) {
val &=
~(INFINIPATH_XGXS_MDIOADDR_MASK <<
INFINIPATH_XGXS_MDIOADDR_SHIFT);
/* MDIO address 3 */
val |= 3ULL << INFINIPATH_XGXS_MDIOADDR_SHIFT;
}
if (val & INFINIPATH_XGXS_RESET) {
if (val & INFINIPATH_XGXS_RESET)
val &= ~INFINIPATH_XGXS_RESET;
}
if (((val >> INFINIPATH_XGXS_RX_POL_SHIFT) &
INFINIPATH_XGXS_RX_POL_MASK) != dd->ipath_rx_pol_inv ) {
/* need to compensate for Tx inversion in partner */
......@@ -765,21 +756,6 @@ static int ipath_pe_bringup_serdes(struct ipath_devdata *dd)
(unsigned long long)
ipath_read_kreg64(dd, dd->ipath_kregs->kr_xgxsconfig));
if (!ipath_waitfor_mdio_cmdready(dd)) {
ipath_write_kreg(
dd, dd->ipath_kregs->kr_mdio,
ipath_mdio_req(IPATH_MDIO_CMD_READ, 31,
IPATH_MDIO_CTRL_XGXS_REG_8, 0));
if (ipath_waitfor_complete(dd, dd->ipath_kregs->kr_mdio,
IPATH_MDIO_DATAVALID, &val))
ipath_dbg("Never got MDIO data for XGXS "
"status read\n");
else
ipath_cdbg(VERBOSE, "MDIO Read reg8, "
"'bank' 31 %x\n", (u32) val);
} else
ipath_dbg("Never got MDIO cmdready for XGXS status read\n");
return ret;
}
......
drivers/infiniband/hw/ipath/ipath_kernel.h
浏览文件 @ 73872733
......@@ -777,8 +777,6 @@ int ipath_set_rx_pol_inv(struct ipath_devdata *dd, u8 new_pol_inv);
/* free up any allocated data at closes */
void ipath_free_data(struct ipath_portdata *dd);
int ipath_waitfor_mdio_cmdready(struct ipath_devdata *);
int ipath_waitfor_complete(struct ipath_devdata *, ipath_kreg, u64, u64 *);
u32 __iomem *ipath_getpiobuf(struct ipath_devdata *, u32 *);
void ipath_init_iba6120_funcs(struct ipath_devdata *);
void ipath_init_iba6110_funcs(struct ipath_devdata *);
......@@ -802,33 +800,6 @@ void ipath_set_led_override(struct ipath_devdata *dd, unsigned int val);
*/
#define IPATH_DFLT_RCVHDRSIZE 9
#define IPATH_MDIO_CMD_WRITE 1
#define IPATH_MDIO_CMD_READ 2
#define IPATH_MDIO_CLD_DIV 25 /* to get 2.5 Mhz mdio clock */
#define IPATH_MDIO_CMDVALID 0x40000000 /* bit 30 */
#define IPATH_MDIO_DATAVALID 0x80000000 /* bit 31 */
#define IPATH_MDIO_CTRL_STD 0x0
static inline u64 ipath_mdio_req(int cmd, int dev, int reg, int data)
{
return (((u64) IPATH_MDIO_CLD_DIV) << 32) |
(cmd << 26) |
(dev << 21) |
(reg << 16) |
(data & 0xFFFF);
}
/* signal and fifo status, in bank 31 */
#define IPATH_MDIO_CTRL_XGXS_REG_8 0x8
/* controls loopback, redundancy */
#define IPATH_MDIO_CTRL_8355_REG_1 0x10
/* premph, encdec, etc. */
#define IPATH_MDIO_CTRL_8355_REG_2 0x11
/* Kchars, etc. */
#define IPATH_MDIO_CTRL_8355_REG_6 0x15
#define IPATH_MDIO_CTRL_8355_REG_9 0x18
#define IPATH_MDIO_CTRL_8355_REG_10 0x1D
int ipath_get_user_pages(unsigned long, size_t, struct page **);
void ipath_release_user_pages(struct page **, size_t);
void ipath_release_user_pages_on_close(struct page **, size_t);
......
drivers/infiniband/hw/ipath/ipath_registers.h
浏览文件 @ 73872733
......@@ -271,20 +271,6 @@
#define INFINIPATH_EXTC_LEDGBLOK_ON 0x00000002ULL
#define INFINIPATH_EXTC_LEDGBLERR_OFF 0x00000001ULL
/* kr_mdio bits */
#define INFINIPATH_MDIO_CLKDIV_MASK 0x7FULL
#define INFINIPATH_MDIO_CLKDIV_SHIFT 32
#define INFINIPATH_MDIO_COMMAND_MASK 0x7ULL
#define INFINIPATH_MDIO_COMMAND_SHIFT 26
#define INFINIPATH_MDIO_DEVADDR_MASK 0x1FULL
#define INFINIPATH_MDIO_DEVADDR_SHIFT 21
#define INFINIPATH_MDIO_REGADDR_MASK 0x1FULL
#define INFINIPATH_MDIO_REGADDR_SHIFT 16
#define INFINIPATH_MDIO_DATA_MASK 0xFFFFULL
#define INFINIPATH_MDIO_DATA_SHIFT 0
#define INFINIPATH_MDIO_CMDVALID 0x0000000040000000ULL
#define INFINIPATH_MDIO_RDDATAVALID 0x0000000080000000ULL
/* kr_partitionkey bits */
#define INFINIPATH_PKEY_SIZE 16
#define INFINIPATH_PKEY_MASK 0xFFFF
......@@ -302,8 +288,6 @@
/* kr_xgxsconfig bits */
#define INFINIPATH_XGXS_RESET 0x7ULL
#define INFINIPATH_XGXS_MDIOADDR_MASK 0xfULL
#define INFINIPATH_XGXS_MDIOADDR_SHIFT 4
#define INFINIPATH_XGXS_RX_POL_SHIFT 19
#define INFINIPATH_XGXS_RX_POL_MASK 0xfULL
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或