提交 73858062 编写于 作者: Z Zhu Yi 提交者: John W. Linville

[PATCH] ieee80211: Fix TX code doesn't enable QoS when using WPA + QoS

Fix ieee80211 TX code when using WPA+QOS. TKIP/CCMP will use
the TID field of qos_ctl in 802.11 frame header to do encryption. We
cannot ignore this field when doing host encryption and add the qos_ctl
field later.
Signed-off-by: NHong Liu <hong.liu@intel.com>
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 ea284152
......@@ -1076,6 +1076,7 @@ struct ieee80211_device {
int (*handle_management) (struct net_device * dev,
struct ieee80211_network * network, u16 type);
int (*is_qos_active) (struct net_device *dev, struct sk_buff *skb);
/* Typical STA methods */
int (*handle_auth) (struct net_device * dev,
......
......@@ -220,13 +220,43 @@ static struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size,
return txb;
}
static int ieee80211_classify(struct sk_buff *skb)
{
struct ethhdr *eth;
struct iphdr *ip;
eth = (struct ethhdr *)skb->data;
if (eth->h_proto != __constant_htons(ETH_P_IP))
return 0;
ip = skb->nh.iph;
switch (ip->tos & 0xfc) {
case 0x20:
return 2;
case 0x40:
return 1;
case 0x60:
return 3;
case 0x80:
return 4;
case 0xa0:
return 5;
case 0xc0:
return 6;
case 0xe0:
return 7;
default:
return 0;
}
}
/* Incoming skb is converted to a txb which consists of
* a block of 802.11 fragment packets (stored as skbs) */
int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct ieee80211_device *ieee = netdev_priv(dev);
struct ieee80211_txb *txb = NULL;
struct ieee80211_hdr_3addr *frag_hdr;
struct ieee80211_hdr_3addrqos *frag_hdr;
int i, bytes_per_frag, nr_frags, bytes_last_frag, frag_size,
rts_required;
unsigned long flags;
......@@ -234,9 +264,10 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
int ether_type, encrypt, host_encrypt, host_encrypt_msdu, host_build_iv;
int bytes, fc, hdr_len;
struct sk_buff *skb_frag;
struct ieee80211_hdr_3addr header = { /* Ensure zero initialized */
struct ieee80211_hdr_3addrqos header = {/* Ensure zero initialized */
.duration_id = 0,
.seq_ctl = 0
.seq_ctl = 0,
.qos_ctl = 0
};
u8 dest[ETH_ALEN], src[ETH_ALEN];
struct ieee80211_crypt_data *crypt;
......@@ -282,12 +313,6 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
memcpy(dest, skb->data, ETH_ALEN);
memcpy(src, skb->data + ETH_ALEN, ETH_ALEN);
/* Advance the SKB to the start of the payload */
skb_pull(skb, sizeof(struct ethhdr));
/* Determine total amount of storage required for TXB packets */
bytes = skb->len + SNAP_SIZE + sizeof(u16);
if (host_encrypt || host_build_iv)
fc = IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA |
IEEE80211_FCTL_PROTECTED;
......@@ -306,9 +331,23 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
memcpy(header.addr2, src, ETH_ALEN);
memcpy(header.addr3, ieee->bssid, ETH_ALEN);
}
header.frame_ctl = cpu_to_le16(fc);
hdr_len = IEEE80211_3ADDR_LEN;
if (ieee->is_qos_active && ieee->is_qos_active(dev, skb)) {
fc |= IEEE80211_STYPE_QOS_DATA;
hdr_len += 2;
skb->priority = ieee80211_classify(skb);
header.qos_ctl |= skb->priority & IEEE80211_QCTL_TID;
}
header.frame_ctl = cpu_to_le16(fc);
/* Advance the SKB to the start of the payload */
skb_pull(skb, sizeof(struct ethhdr));
/* Determine total amount of storage required for TXB packets */
bytes = skb->len + SNAP_SIZE + sizeof(u16);
/* Encrypt msdu first on the whole data packet. */
if ((host_encrypt || host_encrypt_msdu) &&
crypt && crypt->ops && crypt->ops->encrypt_msdu) {
......@@ -402,7 +441,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
if (rts_required) {
skb_frag = txb->fragments[0];
frag_hdr =
(struct ieee80211_hdr_3addr *)skb_put(skb_frag, hdr_len);
(struct ieee80211_hdr_3addrqos *)skb_put(skb_frag, hdr_len);
/*
* Set header frame_ctl to the RTS.
......@@ -433,7 +472,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
crypt->ops->extra_mpdu_prefix_len);
frag_hdr =
(struct ieee80211_hdr_3addr *)skb_put(skb_frag, hdr_len);
(struct ieee80211_hdr_3addrqos *)skb_put(skb_frag, hdr_len);
memcpy(frag_hdr, &header, hdr_len);
/* If this is not the last fragment, then add the MOREFRAGS
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册