提交 7373373d 编写于 作者: R Rajesh Borundia 提交者: David S. Miller

qlcnic: fix mac override capability

o Rename mac_learning to mac_override
o Added check in set_mac to return error if mac override is disabled.
o Disabling mac_override only supported for Non priviledged functions.
Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 dcb50aff
......@@ -905,6 +905,7 @@ struct qlcnic_mac_req {
#define QLCNIC_ADAPTER_INITIALIZED 0x80
#define QLCNIC_TAGGING_ENABLED 0x100
#define QLCNIC_MACSPOOF 0x200
#define QLCNIC_MAC_OVERRIDE_DISABLED 0x400
#define QLCNIC_IS_MSI_FAMILY(adapter) \
((adapter)->flags & (QLCNIC_MSI_ENABLED | QLCNIC_MSIX_ENABLED))
......@@ -1060,7 +1061,7 @@ struct qlcnic_npar_info {
u8 enable_pm;
u8 dest_npar;
u8 discard_tagged;
u8 mac_learning;
u8 mac_override;
u8 mac_anti_spoof;
u8 promisc_mode;
u8 offload_flags;
......@@ -1134,7 +1135,7 @@ struct qlcnic_esw_func_cfg {
u8 host_vlan_tag;
u8 promisc_mode;
u8 discard_tagged;
u8 mac_learning;
u8 mac_override;
u8 mac_anti_spoof;
u8 offload_flags;
u8 reserved[5];
......
......@@ -1100,10 +1100,11 @@ __qlcnic_get_eswitch_port_config(struct qlcnic_adapter *adapter,
*arg1 = QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
*arg2 = QLCRD32(adapter, QLCNIC_ARG2_CRB_OFFSET);
dev_info(&adapter->pdev->dev,
"eSwitch port config for pci func%d\n", pci_func);
"eSwitch port config for pci func %d\n", pci_func);
} else {
dev_err(&adapter->pdev->dev,
"Failed to get eswitch port config%d\n", pci_func);
"Failed to get eswitch port config for pci func %d\n",
pci_func);
}
return err;
}
......@@ -1142,7 +1143,7 @@ int qlcnic_config_switch_port(struct qlcnic_adapter *adapter,
arg1 &= ~BIT_4;
if (!(esw_cfg->promisc_mode))
arg1 &= ~BIT_6;
if (!(esw_cfg->mac_learning))
if (!(esw_cfg->mac_override))
arg1 &= ~BIT_7;
if (!(esw_cfg->mac_anti_spoof))
arg2 &= ~BIT_0;
......@@ -1175,10 +1176,10 @@ int qlcnic_config_switch_port(struct qlcnic_adapter *adapter,
if (err != QLCNIC_RCODE_SUCCESS) {
dev_err(&adapter->pdev->dev,
"Failed to configure eswitch port%d\n", pci_func);
"Failed to configure eswitch pci func %d\n", pci_func);
} else {
dev_info(&adapter->pdev->dev,
"Configured eSwitch for port %d\n", pci_func);
"Configured eSwitch for pci func %d\n", pci_func);
}
return err;
......@@ -1202,7 +1203,7 @@ qlcnic_get_eswitch_port_config(struct qlcnic_adapter *adapter,
esw_cfg->discard_tagged = !!(arg1 & BIT_4);
esw_cfg->host_vlan_tag = !!(arg1 & BIT_5);
esw_cfg->promisc_mode = !!(arg1 & BIT_6);
esw_cfg->mac_learning = !!(arg1 & BIT_7);
esw_cfg->mac_override = !!(arg1 & BIT_7);
esw_cfg->vlan_id = LSW(arg1 >> 16);
esw_cfg->mac_anti_spoof = (arg2 & 0x1);
esw_cfg->offload_flags = ((arg2 >> 1) & 0x7);
......
......@@ -343,6 +343,9 @@ static int qlcnic_set_mac(struct net_device *netdev, void *p)
struct qlcnic_adapter *adapter = netdev_priv(netdev);
struct sockaddr *addr = p;
if ((adapter->flags & QLCNIC_MAC_OVERRIDE_DISABLED))
return -EOPNOTSUPP;
if (!is_valid_ether_addr(addr->sa_data))
return -EINVAL;
......@@ -741,10 +744,14 @@ qlcnic_set_eswitch_port_features(struct qlcnic_adapter *adapter,
struct qlcnic_esw_func_cfg *esw_cfg)
{
adapter->flags &= ~QLCNIC_MACSPOOF;
adapter->flags &= ~QLCNIC_MAC_OVERRIDE_DISABLED;
if (esw_cfg->mac_anti_spoof)
adapter->flags |= QLCNIC_MACSPOOF;
if (!esw_cfg->mac_override)
adapter->flags |= QLCNIC_MAC_OVERRIDE_DISABLED;
qlcnic_set_netdev_features(adapter, esw_cfg);
}
......@@ -862,14 +869,14 @@ qlcnic_set_default_offload_settings(struct qlcnic_adapter *adapter)
memset(&esw_cfg, 0, sizeof(struct qlcnic_esw_func_cfg));
esw_cfg.pci_func = i;
esw_cfg.offload_flags = BIT_0;
esw_cfg.mac_learning = BIT_0;
esw_cfg.mac_override = BIT_0;
if (adapter->capabilities & QLCNIC_FW_CAPABILITY_TSO)
esw_cfg.offload_flags |= (BIT_1 | BIT_2);
if (qlcnic_config_switch_port(adapter, &esw_cfg))
return -EIO;
npar = &adapter->npars[i];
npar->pvid = esw_cfg.vlan_id;
npar->mac_learning = esw_cfg.offload_flags;
npar->mac_override = esw_cfg.mac_override;
npar->mac_anti_spoof = esw_cfg.mac_anti_spoof;
npar->discard_tagged = esw_cfg.discard_tagged;
npar->promisc_mode = esw_cfg.promisc_mode;
......@@ -887,7 +894,7 @@ qlcnic_reset_eswitch_config(struct qlcnic_adapter *adapter,
esw_cfg.op_mode = QLCNIC_PORT_DEFAULTS;
esw_cfg.pci_func = pci_func;
esw_cfg.vlan_id = npar->pvid;
esw_cfg.mac_learning = npar->mac_learning;
esw_cfg.mac_override = npar->mac_override;
esw_cfg.discard_tagged = npar->discard_tagged;
esw_cfg.mac_anti_spoof = npar->mac_anti_spoof;
esw_cfg.offload_flags = npar->offload_flags;
......@@ -3042,6 +3049,10 @@ qlcnicvf_start_firmware(struct qlcnic_adapter *adapter)
qlcnic_check_options(adapter);
err = qlcnic_set_eswitch_port_config(adapter);
if (err)
return err;
adapter->need_fw_reset = 0;
return err;
......@@ -3397,8 +3408,10 @@ validate_esw_config(struct qlcnic_adapter *adapter,
switch (esw_cfg[i].op_mode) {
case QLCNIC_PORT_DEFAULTS:
if (QLC_DEV_GET_DRV(op_mode, pci_func) !=
QLCNIC_NON_PRIV_FUNC)
QLCNIC_NON_PRIV_FUNC) {
esw_cfg[i].mac_anti_spoof = 0;
esw_cfg[i].mac_override = 1;
}
break;
case QLCNIC_ADD_VLAN:
if (!IS_VALID_VLAN(esw_cfg[i].vlan_id))
......@@ -3474,7 +3487,7 @@ qlcnic_sysfs_write_esw_config(struct file *file, struct kobject *kobj,
switch (esw_cfg[i].op_mode) {
case QLCNIC_PORT_DEFAULTS:
npar->promisc_mode = esw_cfg[i].promisc_mode;
npar->mac_learning = esw_cfg[i].mac_learning;
npar->mac_override = esw_cfg[i].mac_override;
npar->offload_flags = esw_cfg[i].offload_flags;
npar->mac_anti_spoof = esw_cfg[i].mac_anti_spoof;
npar->discard_tagged = esw_cfg[i].discard_tagged;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册