ARM: imx: Remove mx508 support

Only mx508 based board is mach-mx50_rdp and it has been marked as BROKEN
for several releases.

mx508 currently lacks clock support.

In case someone needs to add mx508 support back, then the recommended approach
is to use device tree.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

arch/arm/Kconfig.debug

@@ -219,12 +219,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX51.
 
-	config DEBUG_IMX50_IMX53_UART
-		bool "i.MX50 and i.MX53 Debug UART"
-		depends on SOC_IMX50 || SOC_IMX53
+	config DEBUG_IMX53_UART
+		bool "i.MX53 Debug UART"
+		depends on SOC_IMX53
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX50 or i.MX53.
+		  on i.MX53.
 
 	config DEBUG_IMX6Q_UART
 		bool "i.MX6Q Debug UART"
@@ -497,7 +497,7 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX21_IMX27_UART || \
 				 DEBUG_IMX31_IMX35_UART || \
 				 DEBUG_IMX51_UART || \
-				 DEBUG_IMX50_IMX53_UART ||\
+				 DEBUG_IMX53_UART ||\
 				 DEBUG_IMX6Q_UART
 	default "debug/highbank.S" if DEBUG_HIGHBANK_UART
 	default "debug/mvebu.S" if DEBUG_MVEBU_UART

arch/arm/include/debug/imx.S

@@ -34,7 +34,7 @@
 #define UART_PADDR	0x43f90000
 #elif defined (CONFIG_DEBUG_IMX51_UART)
 #define UART_PADDR	0x73fbc000
-#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
+#elif defined (CONFIG_DEBUG_IMX53_UART)
 #define UART_PADDR	0x53fbc000
 #elif defined (CONFIG_DEBUG_IMX6Q_UART)
 #define UART_PADDR	IMX6Q_DEBUG_UART_BASE

arch/arm/mach-imx/Kconfig

@@ -95,9 +95,6 @@ config MACH_MX27
 config ARCH_MX5
 	bool
 
-config ARCH_MX50
-	bool
-
 config ARCH_MX51
 	bool
 
@@ -164,11 +161,6 @@ config SOC_IMX5
 	select CPU_V7
 	select MXC_TZIC
 
-config SOC_IMX50
-	bool
-	select ARCH_MX50
-	select SOC_IMX5
-
 config	SOC_IMX51
 	bool
 	select ARCH_MX5
@@ -738,20 +730,6 @@ endif
 
 if ARCH_MULTI_V7
 
-comment "i.MX5 platforms:"
-
-config MACH_MX50_RDP
-	bool "Support MX50 reference design platform"
-	depends on BROKEN
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select SOC_IMX50
-	help
-	  Include support for MX50 reference design platform (RDP) board. This
-	  includes specific configurations for the board and its peripherals.
-
 comment "i.MX51 machines:"
 
 config MACH_IMX51_DT

arch/arm/mach-imx/Makefile

@@ -104,7 +104,6 @@ endif
 obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
 obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o
-obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
 
 obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
 obj-$(CONFIG_SOC_IMX53) += mach-imx53.o

arch/arm/mach-imx/Makefile.boot

@@ -22,10 +22,6 @@ zreladdr-$(CONFIG_SOC_IMX35)	+= 0x80008000
 params_phys-$(CONFIG_SOC_IMX35)	:= 0x80000100
 initrd_phys-$(CONFIG_SOC_IMX35)	:= 0x80800000
 
-zreladdr-$(CONFIG_SOC_IMX50)	+= 0x70008000
-params_phys-$(CONFIG_SOC_IMX50)	:= 0x70000100
-initrd_phys-$(CONFIG_SOC_IMX50)	:= 0x70800000
-
 zreladdr-$(CONFIG_SOC_IMX51)	+= 0x90008000
 params_phys-$(CONFIG_SOC_IMX51)	:= 0x90000100
 initrd_phys-$(CONFIG_SOC_IMX51)	:= 0x90800000

arch/arm/mach-imx/common.h

@@ -21,7 +21,6 @@ extern void mx25_map_io(void);
 extern void mx27_map_io(void);
 extern void mx31_map_io(void);
 extern void mx35_map_io(void);
-extern void mx50_map_io(void);
 extern void mx51_map_io(void);
 extern void mx53_map_io(void);
 extern void imx1_init_early(void);
@@ -30,7 +29,6 @@ extern void imx25_init_early(void);
 extern void imx27_init_early(void);
 extern void imx31_init_early(void);
 extern void imx35_init_early(void);
-extern void imx50_init_early(void);
 extern void imx51_init_early(void);
 extern void imx53_init_early(void);
 extern void mxc_init_irq(void __iomem *);
@@ -41,7 +39,6 @@ extern void mx25_init_irq(void);
 extern void mx27_init_irq(void);
 extern void mx31_init_irq(void);
 extern void mx35_init_irq(void);
-extern void mx50_init_irq(void);
 extern void mx51_init_irq(void);
 extern void mx53_init_irq(void);
 extern void imx1_soc_init(void);
@@ -50,7 +47,6 @@ extern void imx25_soc_init(void);
 extern void imx27_soc_init(void);
 extern void imx31_soc_init(void);
 extern void imx35_soc_init(void);
-extern void imx50_soc_init(void);
 extern void imx51_soc_init(void);
 extern void imx51_init_late(void);
 extern void imx53_init_late(void);
@@ -109,7 +105,6 @@ void tzic_handle_irq(struct pt_regs *);
 #define imx27_handle_irq avic_handle_irq
 #define imx31_handle_irq avic_handle_irq
 #define imx35_handle_irq avic_handle_irq
-#define imx50_handle_irq tzic_handle_irq
 #define imx51_handle_irq tzic_handle_irq
 #define imx53_handle_irq tzic_handle_irq
 #define imx6q_handle_irq gic_handle_irq

arch/arm/mach-imx/cpu-imx5.c

@@ -22,7 +22,6 @@
 static int mx5_cpu_rev = -1;
 
 #define IIM_SREV 0x24
-#define MX50_HW_ADADIG_DIGPROG	0xB0
 
 static int get_mx51_srev(void)
 {
@@ -108,41 +107,3 @@ int mx53_revision(void)
 	return mx5_cpu_rev;
 }
 EXPORT_SYMBOL(mx53_revision);
-
-static int get_mx50_srev(void)
-{
-	void __iomem *anatop = ioremap(MX50_ANATOP_BASE_ADDR, SZ_8K);
-	u32 rev;
-
-	if (!anatop) {
-		mx5_cpu_rev = -EINVAL;
-		return 0;
-	}
-
-	rev = readl(anatop + MX50_HW_ADADIG_DIGPROG);
-	rev &= 0xff;
-
-	iounmap(anatop);
-	if (rev == 0x0)
-		return IMX_CHIP_REVISION_1_0;
-	else if (rev == 0x1)
-		return IMX_CHIP_REVISION_1_1;
-	return 0;
-}
-
-/*
- * Returns:
- *	the silicon revision of the cpu
- *	-EINVAL - not a mx50
- */
-int mx50_revision(void)
-{
-	if (!cpu_is_mx50())
-		return -EINVAL;
-
-	if (mx5_cpu_rev == -1)
-		mx5_cpu_rev = get_mx50_srev();
-
-	return mx5_cpu_rev;
-}
-EXPORT_SYMBOL(mx50_revision);

arch/arm/mach-imx/devices-imx50.h

-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include "devices/devices-common.h"
-
-extern const struct imx_imx_uart_1irq_data imx50_imx_uart_data[];
-#define imx50_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx50_imx_uart_data[id], pdata)
-
-extern const struct imx_fec_data imx50_fec_data;
-#define imx50_add_fec(pdata)	\
-	imx_add_fec(&imx50_fec_data, pdata)
-
-extern const struct imx_imx_i2c_data imx50_imx_i2c_data[];
-#define imx50_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx50_imx_i2c_data[id], pdata)

arch/arm/mach-imx/devices/Kconfig

 config IMX_HAVE_PLATFORM_FEC
 	bool
-	default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX50 || SOC_IMX51 || SOC_IMX53
+	default y if ARCH_MX25 || SOC_IMX27 || SOC_IMX35 || SOC_IMX51 || SOC_IMX53
 
 config IMX_HAVE_PLATFORM_FLEXCAN
 	bool

arch/arm/mach-imx/devices/platform-fec.c

@@ -35,12 +35,6 @@ const struct imx_fec_data imx35_fec_data __initconst =
 	imx_fec_data_entry_single(MX35, "imx27-fec");
 #endif
 
-#ifdef CONFIG_SOC_IMX50
-/* i.mx50 has the i.mx25 type fec */
-const struct imx_fec_data imx50_fec_data __initconst =
-	imx_fec_data_entry_single(MX50, "imx25-fec");
-#endif
-
 #ifdef CONFIG_SOC_IMX51
 /* i.mx51 has the i.mx27 type fec */
 const struct imx_fec_data imx51_fec_data __initconst =

arch/arm/mach-imx/devices/platform-imx-i2c.c

@@ -70,16 +70,6 @@ const struct imx_imx_i2c_data imx35_imx_i2c_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_SOC_IMX50
-const struct imx_imx_i2c_data imx50_imx_i2c_data[] __initconst = {
-#define imx50_imx_i2c_data_entry(_id, _hwid)				\
-	imx_imx_i2c_data_entry(MX50, "imx21-i2c", _id, _hwid, SZ_4K)
-	imx50_imx_i2c_data_entry(0, 1),
-	imx50_imx_i2c_data_entry(1, 2),
-	imx50_imx_i2c_data_entry(2, 3),
-};
-#endif /* ifdef CONFIG_SOC_IMX51 */
-
 #ifdef CONFIG_SOC_IMX51
 const struct imx_imx_i2c_data imx51_imx_i2c_data[] __initconst = {
 #define imx51_imx_i2c_data_entry(_id, _hwid)				\

arch/arm/mach-imx/devices/platform-imx-uart.c

@@ -94,18 +94,6 @@ const struct imx_imx_uart_1irq_data imx35_imx_uart_data[] __initconst = {
 };
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
-#ifdef CONFIG_SOC_IMX50
-const struct imx_imx_uart_1irq_data imx50_imx_uart_data[] __initconst = {
-#define imx50_imx_uart_data_entry(_id, _hwid)				\
-	imx_imx_uart_1irq_data_entry(MX50, _id, _hwid, SZ_4K)
-	imx50_imx_uart_data_entry(0, 1),
-	imx50_imx_uart_data_entry(1, 2),
-	imx50_imx_uart_data_entry(2, 3),
-	imx50_imx_uart_data_entry(3, 4),
-	imx50_imx_uart_data_entry(4, 5),
-};
-#endif /* ifdef CONFIG_SOC_IMX50 */
-
 #ifdef CONFIG_SOC_IMX51
 const struct imx_imx_uart_1irq_data imx51_imx_uart_data[] __initconst = {
 #define imx51_imx_uart_data_entry(_id, _hwid)				\

arch/arm/mach-imx/hardware.h

@@ -72,11 +72,6 @@
  *	AVIC	0x68000000+0x100000	->	0xf5800000+0x100000
  *	X_MEMC	0xb8000000+0x010000	->	0xf5c00000+0x010000
  *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
- * mx50:
- *	TZIC	0x0fffc000+0x004000	->	0xf4bfc000+0x004000
- *	AIPS1	0x53f00000+0x100000	->	0xf5700000+0x100000
- *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
- *	AIPS2	0x63f00000+0x100000	->	0xf5300000+0x100000
  * mx51:
  *	TZIC	0x0fffc000+0x004000	->	0xf4bfc000+0x004000
  *	IRAM	0x1ffe0000+0x020000	->	0xf4fe0000+0x020000
@@ -108,7 +103,6 @@
 #include "mxc.h"
 
 #include "mx6q.h"
-#include "mx50.h"
 #include "mx51.h"
 #include "mx53.h"
 #include "mx3x.h"

arch/arm/mach-imx/mach-mx50_rdp.c

-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-
-#include "common.h"
-#include "devices-imx50.h"
-#include "hardware.h"
-#include "iomux-mx50.h"
-
-#define FEC_EN		IMX_GPIO_NR(6, 23)
-#define FEC_RESET_B	IMX_GPIO_NR(4, 12)
-
-static iomux_v3_cfg_t mx50_rdp_pads[] __initdata = {
-	/* SD1 */
-	MX50_PAD_ECSPI2_SS0__GPIO_4_19,
-	MX50_PAD_EIM_CRE__GPIO_1_27,
-	MX50_PAD_SD1_CMD__SD1_CMD,
-
-	MX50_PAD_SD1_CLK__SD1_CLK,
-	MX50_PAD_SD1_D0__SD1_D0,
-	MX50_PAD_SD1_D1__SD1_D1,
-	MX50_PAD_SD1_D2__SD1_D2,
-	MX50_PAD_SD1_D3__SD1_D3,
-
-	/* SD2 */
-	MX50_PAD_SD2_CD__GPIO_5_17,
-	MX50_PAD_SD2_WP__GPIO_5_16,
-	MX50_PAD_SD2_CMD__SD2_CMD,
-	MX50_PAD_SD2_CLK__SD2_CLK,
-	MX50_PAD_SD2_D0__SD2_D0,
-	MX50_PAD_SD2_D1__SD2_D1,
-	MX50_PAD_SD2_D2__SD2_D2,
-	MX50_PAD_SD2_D3__SD2_D3,
-	MX50_PAD_SD2_D4__SD2_D4,
-	MX50_PAD_SD2_D5__SD2_D5,
-	MX50_PAD_SD2_D6__SD2_D6,
-	MX50_PAD_SD2_D7__SD2_D7,
-
-	/* SD3 */
-	MX50_PAD_SD3_CMD__SD3_CMD,
-	MX50_PAD_SD3_CLK__SD3_CLK,
-	MX50_PAD_SD3_D0__SD3_D0,
-	MX50_PAD_SD3_D1__SD3_D1,
-	MX50_PAD_SD3_D2__SD3_D2,
-	MX50_PAD_SD3_D3__SD3_D3,
-	MX50_PAD_SD3_D4__SD3_D4,
-	MX50_PAD_SD3_D5__SD3_D5,
-	MX50_PAD_SD3_D6__SD3_D6,
-	MX50_PAD_SD3_D7__SD3_D7,
-
-	/* PWR_INT */
-	MX50_PAD_ECSPI2_MISO__GPIO_4_18,
-
-	/* UART pad setting */
-	MX50_PAD_UART1_TXD__UART1_TXD,
-	MX50_PAD_UART1_RXD__UART1_RXD,
-	MX50_PAD_UART1_RTS__UART1_RTS,
-	MX50_PAD_UART2_TXD__UART2_TXD,
-	MX50_PAD_UART2_RXD__UART2_RXD,
-	MX50_PAD_UART2_CTS__UART2_CTS,
-	MX50_PAD_UART2_RTS__UART2_RTS,
-
-	MX50_PAD_I2C1_SCL__I2C1_SCL,
-	MX50_PAD_I2C1_SDA__I2C1_SDA,
-	MX50_PAD_I2C2_SCL__I2C2_SCL,
-	MX50_PAD_I2C2_SDA__I2C2_SDA,
-
-	MX50_PAD_EPITO__USBH1_PWR,
-	/* Need to comment below line if
-	 * one needs to debug owire.
-	 */
-	MX50_PAD_OWIRE__USBH1_OC,
-	/* using gpio to control otg pwr */
-	MX50_PAD_PWM2__GPIO_6_25,
-	MX50_PAD_I2C3_SCL__USBOTG_OC,
-
-	MX50_PAD_SSI_RXC__FEC_MDIO,
-	MX50_PAD_SSI_RXFS__FEC_MDC,
-	MX50_PAD_DISP_D0__FEC_TXCLK,
-	MX50_PAD_DISP_D1__FEC_RX_ER,
-	MX50_PAD_DISP_D2__FEC_RX_DV,
-	MX50_PAD_DISP_D3__FEC_RXD1,
-	MX50_PAD_DISP_D4__FEC_RXD0,
-	MX50_PAD_DISP_D5__FEC_TX_EN,
-	MX50_PAD_DISP_D6__FEC_TXD1,
-	MX50_PAD_DISP_D7__FEC_TXD0,
-	MX50_PAD_I2C3_SDA__GPIO_6_23,
-	MX50_PAD_ECSPI1_SCLK__GPIO_4_12,
-
-	MX50_PAD_CSPI_SS0__CSPI_SS0,
-	MX50_PAD_ECSPI1_MOSI__CSPI_SS1,
-	MX50_PAD_CSPI_MOSI__CSPI_MOSI,
-	MX50_PAD_CSPI_MISO__CSPI_MISO,
-
-	/* SGTL500_OSC_EN */
-	MX50_PAD_UART1_CTS__GPIO_6_8,
-
-	/* SGTL_AMP_SHDN */
-	MX50_PAD_UART3_RXD__GPIO_6_15,
-
-	/* Keypad */
-	MX50_PAD_KEY_COL0__KEY_COL0,
-	MX50_PAD_KEY_ROW0__KEY_ROW0,
-	MX50_PAD_KEY_COL1__KEY_COL1,
-	MX50_PAD_KEY_ROW1__KEY_ROW1,
-	MX50_PAD_KEY_COL2__KEY_COL2,
-	MX50_PAD_KEY_ROW2__KEY_ROW2,
-	MX50_PAD_KEY_COL3__KEY_COL3,
-	MX50_PAD_KEY_ROW3__KEY_ROW3,
-	MX50_PAD_EIM_DA0__KEY_COL4,
-	MX50_PAD_EIM_DA1__KEY_ROW4,
-	MX50_PAD_EIM_DA2__KEY_COL5,
-	MX50_PAD_EIM_DA3__KEY_ROW5,
-	MX50_PAD_EIM_DA4__KEY_COL6,
-	MX50_PAD_EIM_DA5__KEY_ROW6,
-	MX50_PAD_EIM_DA6__KEY_COL7,
-	MX50_PAD_EIM_DA7__KEY_ROW7,
-	/*EIM pads */
-	MX50_PAD_EIM_DA8__GPIO_1_8,
-	MX50_PAD_EIM_DA9__GPIO_1_9,
-	MX50_PAD_EIM_DA10__GPIO_1_10,
-	MX50_PAD_EIM_DA11__GPIO_1_11,
-	MX50_PAD_EIM_DA12__GPIO_1_12,
-	MX50_PAD_EIM_DA13__GPIO_1_13,
-	MX50_PAD_EIM_DA14__GPIO_1_14,
-	MX50_PAD_EIM_DA15__GPIO_1_15,
-	MX50_PAD_EIM_CS2__GPIO_1_16,
-	MX50_PAD_EIM_CS1__GPIO_1_17,
-	MX50_PAD_EIM_CS0__GPIO_1_18,
-	MX50_PAD_EIM_EB0__GPIO_1_19,
-	MX50_PAD_EIM_EB1__GPIO_1_20,
-	MX50_PAD_EIM_WAIT__GPIO_1_21,
-	MX50_PAD_EIM_BCLK__GPIO_1_22,
-	MX50_PAD_EIM_RDY__GPIO_1_23,
-	MX50_PAD_EIM_OE__GPIO_1_24,
-};
-
-/* Serial ports */
-static const struct imxuart_platform_data uart_pdata __initconst = {
-	.flags = IMXUART_HAVE_RTSCTS,
-};
-
-static const struct fec_platform_data fec_data __initconst = {
-	.phy = PHY_INTERFACE_MODE_RMII,
-};
-
-static inline void mx50_rdp_fec_reset(void)
-{
-	gpio_request(FEC_EN, "fec-en");
-	gpio_direction_output(FEC_EN, 0);
-	gpio_request(FEC_RESET_B, "fec-reset_b");
-	gpio_direction_output(FEC_RESET_B, 0);
-	msleep(1);
-	gpio_set_value(FEC_RESET_B, 1);
-}
-
-static const struct imxi2c_platform_data i2c_data __initconst = {
-	.bitrate = 100000,
-};
-
-/*
- * Board specific initialization.
- */
-static void __init mx50_rdp_board_init(void)
-{
-	imx50_soc_init();
-
-	mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads,
-					ARRAY_SIZE(mx50_rdp_pads));
-
-	imx50_add_imx_uart(0, &uart_pdata);
-	imx50_add_imx_uart(1, &uart_pdata);
-	mx50_rdp_fec_reset();
-	imx50_add_fec(&fec_data);
-	imx50_add_imx_i2c(0, &i2c_data);
-	imx50_add_imx_i2c(1, &i2c_data);
-	imx50_add_imx_i2c(2, &i2c_data);
-}
-
-static void __init mx50_rdp_timer_init(void)
-{
-	mx50_clocks_init(32768, 24000000, 22579200);
-}
-
-static struct sys_timer mx50_rdp_timer = {
-	.init	= mx50_rdp_timer_init,
-};
-
-MACHINE_START(MX50_RDP, "Freescale MX50 Reference Design Platform")
-	.map_io = mx50_map_io,
-	.init_early = imx50_init_early,
-	.init_irq = mx50_init_irq,
-	.handle_irq = imx50_handle_irq,
-	.timer = &mx50_rdp_timer,
-	.init_machine = mx50_rdp_board_init,
-	.restart	= mxc_restart,
-MACHINE_END

arch/arm/mach-imx/mm-imx5.c

@@ -23,16 +23,6 @@
 #include "hardware.h"
 #include "iomux-v3.h"
 
-/*
- * Define the MX50 memory map.
- */
-static struct map_desc mx50_io_desc[] __initdata = {
-	imx_map_entry(MX50, TZIC, MT_DEVICE),
-	imx_map_entry(MX50, SPBA0, MT_DEVICE),
-	imx_map_entry(MX50, AIPS1, MT_DEVICE),
-	imx_map_entry(MX50, AIPS2, MT_DEVICE),
-};
-
 /*
  * Define the MX51 memory map.
  */
@@ -59,11 +49,6 @@ static struct map_desc mx53_io_desc[] __initdata = {
  * system startup to create static physical to virtual memory mappings
  * for the IO modules.
  */
-void __init mx50_map_io(void)
-{
-	iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
-}
-
 void __init mx51_map_io(void)
 {
 	iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
@@ -74,13 +59,6 @@ void __init mx53_map_io(void)
 	iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
 }
 
-void __init imx50_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX50);
-	mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
-}
-
 /*
  * The MIPI HSC unit has been removed from the i.MX51 Reference Manual by
  * the Freescale marketing division. However this did not remove the
@@ -115,11 +93,6 @@ void __init imx53_init_early(void)
 	mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
 }
 
-void __init mx50_init_irq(void)
-{
-	tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
-}
-
 void __init mx51_init_irq(void)
 {
 	tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
@@ -148,31 +121,10 @@ static struct sdma_platform_data imx51_sdma_pdata __initdata = {
 	.script_addrs = &imx51_sdma_script,
 };
 
-static const struct resource imx50_audmux_res[] __initconst = {
-	DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K),
-};
-
 static const struct resource imx51_audmux_res[] __initconst = {
 	DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K),
 };
 
-void __init imx50_soc_init(void)
-{
-	mxc_device_init();
-
-	/* i.mx50 has the i.mx35 type gpio */
-	mxc_register_gpio("imx35-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx35-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx35-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx35-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
-	mxc_register_gpio("imx35-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
-	mxc_register_gpio("imx35-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
-
-	/* i.mx50 has the i.mx31 type audmux */
-	platform_device_register_simple("imx31-audmux", 0, imx50_audmux_res,
-					ARRAY_SIZE(imx50_audmux_res));
-}
-
 void __init imx51_soc_init(void)
 {
 	mxc_device_init();

arch/arm/mach-imx/mx50.h

-#ifndef __MACH_MX50_H__
-#define __MACH_MX50_H__
-
-/*
- * IROM
- */
-#define MX50_IROM_BASE_ADDR		0x0
-#define MX50_IROM_SIZE			SZ_64K
-
-/* TZIC */
-#define MX50_TZIC_BASE_ADDR		0x0fffc000
-#define MX50_TZIC_SIZE			SZ_16K
-
-/*
- * IRAM
- */
-#define MX50_IRAM_BASE_ADDR	0xf8000000	/* internal ram */
-#define MX50_IRAM_PARTITIONS	16
-#define MX50_IRAM_SIZE		(MX50_IRAM_PARTITIONS * SZ_8K)	/* 128KB */
-
-/*
- * Databahn
- */
-#define MX50_DATABAHN_BASE_ADDR			0x14000000
-
-/*
- * Graphics Memory of GPU
- */
-#define MX50_GPU2D_BASE_ADDR		0x20000000
-
-#define MX50_DEBUG_BASE_ADDR		0x40000000
-#define MX50_DEBUG_SIZE			SZ_1M
-#define MX50_ETB_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00001000)
-#define MX50_ETM_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00002000)
-#define MX50_TPIU_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00003000)
-#define MX50_CTI0_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00004000)
-#define MX50_CTI1_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00005000)
-#define MX50_CTI2_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00006000)
-#define MX50_CTI3_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x00007000)
-#define MX50_CORTEX_DBG_BASE_ADDR	(MX50_DEBUG_BASE_ADDR + 0x00008000)
-
-#define MX50_APBHDMA_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01000000)
-#define MX50_OCOTP_CTRL_BASE_ADDR	(MX50_DEBUG_BASE_ADDR + 0x01002000)
-#define MX50_DIGCTL_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01004000)
-#define MX50_GPMI_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01006000)
-#define MX50_BCH_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01008000)
-#define MX50_ELCDIF_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x0100a000)
-#define MX50_EPXP_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x0100c000)
-#define MX50_DCP_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x0100e000)
-#define MX50_EPDC_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01010000)
-#define MX50_QOSC_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01012000)
-#define MX50_PERFMON_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01014000)
-#define MX50_SSP_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01016000)
-#define MX50_ANATOP_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x01018000)
-#define MX50_NIC_BASE_ADDR		(MX50_DEBUG_BASE_ADDR + 0x08000000)
-
-/*
- * SPBA global module enabled #0
- */
-#define MX50_SPBA0_BASE_ADDR		0x50000000
-#define MX50_SPBA0_SIZE			SZ_1M
-
-#define MX50_MMC_SDHC1_BASE_ADDR	(MX50_SPBA0_BASE_ADDR + 0x00004000)
-#define MX50_MMC_SDHC2_BASE_ADDR	(MX50_SPBA0_BASE_ADDR + 0x00008000)
-#define MX50_UART3_BASE_ADDR		(MX50_SPBA0_BASE_ADDR + 0x0000c000)
-#define MX50_CSPI1_BASE_ADDR		(MX50_SPBA0_BASE_ADDR + 0x00010000)
-#define MX50_SSI2_BASE_ADDR		(MX50_SPBA0_BASE_ADDR + 0x00014000)
-#define MX50_MMC_SDHC3_BASE_ADDR	(MX50_SPBA0_BASE_ADDR + 0x00020000)
-#define MX50_MMC_SDHC4_BASE_ADDR	(MX50_SPBA0_BASE_ADDR + 0x00024000)
-
-/*
- * AIPS 1
- */
-#define MX50_AIPS1_BASE_ADDR	0x53f00000
-#define MX50_AIPS1_SIZE		SZ_1M
-
-#define MX50_OTG_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00080000)
-#define MX50_GPIO1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00084000)
-#define MX50_GPIO2_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00088000)
-#define MX50_GPIO3_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x0008c000)
-#define MX50_GPIO4_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00090000)
-#define MX50_KPP_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00094000)
-#define MX50_WDOG_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x00098000)
-#define MX50_GPT1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000a0000)
-#define MX50_SRTC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000a4000)
-#define MX50_IOMUXC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000a8000)
-#define MX50_EPIT1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000ac000)
-#define MX50_PWM1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000b4000)
-#define MX50_PWM2_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000b8000)
-#define MX50_UART1_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000bc000)
-#define MX50_UART2_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000c0000)
-#define MX50_SRC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000d0000)
-#define MX50_CCM_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000d4000)
-#define MX50_GPC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000d8000)
-#define MX50_GPIO5_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000dc000)
-#define MX50_GPIO6_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000e0000)
-#define MX50_I2C3_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000ec000)
-#define MX50_UART4_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000f0000)
-
-#define MX50_MSHC_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000f4000)
-#define MX50_RNGB_BASE_ADDR	(MX50_AIPS1_BASE_ADDR + 0x000f8000)
-
-/*
- * AIPS 2
- */
-#define MX50_AIPS2_BASE_ADDR	0x63f00000
-#define MX50_AIPS2_SIZE		SZ_1M
-
-#define MX50_PLL1_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00080000)
-#define MX50_PLL2_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00084000)
-#define MX50_PLL3_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00088000)
-#define MX50_UART5_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00090000)
-#define MX50_AHBMAX_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x00094000)
-#define MX50_ARM_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000a0000)
-#define MX50_OWIRE_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000a4000)
-#define MX50_CSPI2_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000ac000)
-#define MX50_SDMA_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000b0000)
-#define MX50_ROMCP_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000b8000)
-#define MX50_CSPI3_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000c0000)
-#define MX50_I2C2_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000c4000)
-#define MX50_I2C1_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000c8000)
-#define MX50_SSI1_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000cc000)
-#define MX50_AUDMUX_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000d0000)
-#define MX50_WEIM_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000d8000)
-#define MX50_FEC_BASE_ADDR	(MX50_AIPS2_BASE_ADDR + 0x000ec000)
-
-/*
- * Memory regions and CS
- */
-#define MX50_CSD0_BASE_ADDR		0x70000000
-#define MX50_CSD1_BASE_ADDR		0xb0000000
-#define MX50_CS0_BASE_ADDR		0xf0000000
-
-#define MX50_IO_P2V(x)			IMX_IO_P2V(x)
-#define MX50_IO_ADDRESS(x)		IOMEM(MX50_IO_P2V(x))
-
-/*
- * defines for SPBA modules
- */
-#define MX50_SPBA_SDHC1		0x04
-#define MX50_SPBA_SDHC2		0x08
-#define MX50_SPBA_UART3		0x0c
-#define MX50_SPBA_CSPI1		0x10
-#define MX50_SPBA_SSI2		0x14
-#define MX50_SPBA_SDHC3		0x20
-#define MX50_SPBA_SDHC4		0x24
-#define MX50_SPBA_SPDIF		0x28
-#define MX50_SPBA_ATA		0x30
-#define MX50_SPBA_SLIM		0x34
-#define MX50_SPBA_HSI2C		0x38
-#define MX50_SPBA_CTRL		0x3c
-
-/*
- * DMA request assignments
- */
-#define MX50_DMA_REQ_GPC		1
-#define MX50_DMA_REQ_ATA_UART4_RX	2
-#define MX50_DMA_REQ_ATA_UART4_TX	3
-#define MX50_DMA_REQ_CSPI1_RX		6
-#define MX50_DMA_REQ_CSPI1_TX		7
-#define MX50_DMA_REQ_CSPI2_RX		8
-#define MX50_DMA_REQ_CSPI2_TX		9
-#define MX50_DMA_REQ_I2C3_SDHC3		10
-#define MX50_DMA_REQ_SDHC4		11
-#define MX50_DMA_REQ_UART2_FIRI_RX	12
-#define MX50_DMA_REQ_UART2_FIRI_TX	13
-#define MX50_DMA_REQ_EXT0		14
-#define MX50_DMA_REQ_EXT1		15
-#define MX50_DMA_REQ_UART5_RX		16
-#define MX50_DMA_REQ_UART5_TX		17
-#define MX50_DMA_REQ_UART1_RX		18
-#define MX50_DMA_REQ_UART1_TX		19
-#define MX50_DMA_REQ_I2C1_SDHC1		20
-#define MX50_DMA_REQ_I2C2_SDHC2		21
-#define MX50_DMA_REQ_SSI2_RX2		22
-#define MX50_DMA_REQ_SSI2_TX2		23
-#define MX50_DMA_REQ_SSI2_RX1		24
-#define MX50_DMA_REQ_SSI2_TX1		25
-#define MX50_DMA_REQ_SSI1_RX2		26
-#define MX50_DMA_REQ_SSI1_TX2		27
-#define MX50_DMA_REQ_SSI1_RX1		28
-#define MX50_DMA_REQ_SSI1_TX1		29
-#define MX50_DMA_REQ_CSPI_RX		38
-#define MX50_DMA_REQ_CSPI_TX		39
-#define MX50_DMA_REQ_UART3_RX		42
-#define MX50_DMA_REQ_UART3_TX		43
-
-/*
- * Interrupt numbers
- */
-#include <asm/irq.h>
-#define MX50_INT_MMC_SDHC1	(NR_IRQS_LEGACY + 1)
-#define MX50_INT_MMC_SDHC2	(NR_IRQS_LEGACY + 2)
-#define MX50_INT_MMC_SDHC3	(NR_IRQS_LEGACY + 3)
-#define MX50_INT_MMC_SDHC4	(NR_IRQS_LEGACY + 4)
-#define MX50_INT_DAP		(NR_IRQS_LEGACY + 5)
-#define MX50_INT_SDMA		(NR_IRQS_LEGACY + 6)
-#define MX50_INT_IOMUX		(NR_IRQS_LEGACY + 7)
-#define MX50_INT_UART4		(NR_IRQS_LEGACY + 13)
-#define MX50_INT_USB_H1		(NR_IRQS_LEGACY + 14)
-#define MX50_INT_USB_OTG	(NR_IRQS_LEGACY + 18)
-#define MX50_INT_DATABAHN	(NR_IRQS_LEGACY + 19)
-#define MX50_INT_ELCDIF		(NR_IRQS_LEGACY + 20)
-#define MX50_INT_EPXP		(NR_IRQS_LEGACY + 21)
-#define MX50_INT_SRTC_NTZ	(NR_IRQS_LEGACY + 24)
-#define MX50_INT_SRTC_TZ	(NR_IRQS_LEGACY + 25)
-#define MX50_INT_EPDC		(NR_IRQS_LEGACY + 27)
-#define MX50_INT_NIC		(NR_IRQS_LEGACY + 28)
-#define MX50_INT_SSI1		(NR_IRQS_LEGACY + 29)
-#define MX50_INT_SSI2		(NR_IRQS_LEGACY + 30)
-#define MX50_INT_UART1		(NR_IRQS_LEGACY + 31)
-#define MX50_INT_UART2		(NR_IRQS_LEGACY + 32)
-#define MX50_INT_UART3		(NR_IRQS_LEGACY + 33)
-#define MX50_INT_RESV34		(NR_IRQS_LEGACY + 34)
-#define MX50_INT_RESV35		(NR_IRQS_LEGACY + 35)
-#define MX50_INT_CSPI1		(NR_IRQS_LEGACY + 36)
-#define MX50_INT_CSPI2		(NR_IRQS_LEGACY + 37)
-#define MX50_INT_CSPI		(NR_IRQS_LEGACY + 38)
-#define MX50_INT_GPT		(NR_IRQS_LEGACY + 39)
-#define MX50_INT_EPIT1		(NR_IRQS_LEGACY + 40)
-#define MX50_INT_GPIO1_INT7	(NR_IRQS_LEGACY + 42)
-#define MX50_INT_GPIO1_INT6	(NR_IRQS_LEGACY + 43)
-#define MX50_INT_GPIO1_INT5	(NR_IRQS_LEGACY + 44)
-#define MX50_INT_GPIO1_INT4	(NR_IRQS_LEGACY + 45)
-#define MX50_INT_GPIO1_INT3	(NR_IRQS_LEGACY + 46)
-#define MX50_INT_GPIO1_INT2	(NR_IRQS_LEGACY + 47)
-#define MX50_INT_GPIO1_INT1	(NR_IRQS_LEGACY + 48)
-#define MX50_INT_GPIO1_INT0	(NR_IRQS_LEGACY + 49)
-#define MX50_INT_GPIO1_LOW	(NR_IRQS_LEGACY + 50)
-#define MX50_INT_GPIO1_HIGH	(NR_IRQS_LEGACY + 51)
-#define MX50_INT_GPIO2_LOW	(NR_IRQS_LEGACY + 52)
-#define MX50_INT_GPIO2_HIGH	(NR_IRQS_LEGACY + 53)
-#define MX50_INT_GPIO3_LOW	(NR_IRQS_LEGACY + 54)
-#define MX50_INT_GPIO3_HIGH	(NR_IRQS_LEGACY + 55)
-#define MX50_INT_GPIO4_LOW	(NR_IRQS_LEGACY + 56)
-#define MX50_INT_GPIO4_HIGH	(NR_IRQS_LEGACY + 57)
-#define MX50_INT_WDOG1		(NR_IRQS_LEGACY + 58)
-#define MX50_INT_KPP		(NR_IRQS_LEGACY + 60)
-#define MX50_INT_PWM1		(NR_IRQS_LEGACY + 61)
-#define MX50_INT_I2C1		(NR_IRQS_LEGACY + 62)
-#define MX50_INT_I2C2		(NR_IRQS_LEGACY + 63)
-#define MX50_INT_I2C3		(NR_IRQS_LEGACY + 64)
-#define MX50_INT_RESV65		(NR_IRQS_LEGACY + 65)
-#define MX50_INT_DCDC		(NR_IRQS_LEGACY + 66)
-#define MX50_INT_THERMAL_ALARM	(NR_IRQS_LEGACY + 67)
-#define MX50_INT_ANA3		(NR_IRQS_LEGACY + 68)
-#define MX50_INT_ANA4		(NR_IRQS_LEGACY + 69)
-#define MX50_INT_CCM1		(NR_IRQS_LEGACY + 71)
-#define MX50_INT_CCM2		(NR_IRQS_LEGACY + 72)
-#define MX50_INT_GPC1		(NR_IRQS_LEGACY + 73)
-#define MX50_INT_GPC2		(NR_IRQS_LEGACY + 74)
-#define MX50_INT_SRC		(NR_IRQS_LEGACY + 75)
-#define MX50_INT_NM		(NR_IRQS_LEGACY + 76)
-#define MX50_INT_PMU		(NR_IRQS_LEGACY + 77)
-#define MX50_INT_CTI_IRQ	(NR_IRQS_LEGACY + 78)
-#define MX50_INT_CTI1_TG0	(NR_IRQS_LEGACY + 79)
-#define MX50_INT_CTI1_TG1	(NR_IRQS_LEGACY + 80)
-#define MX50_INT_GPU2_IRQ	(NR_IRQS_LEGACY + 84)
-#define MX50_INT_GPU2_BUSY	(NR_IRQS_LEGACY + 85)
-#define MX50_INT_UART5		(NR_IRQS_LEGACY + 86)
-#define MX50_INT_FEC		(NR_IRQS_LEGACY + 87)
-#define MX50_INT_OWIRE		(NR_IRQS_LEGACY + 88)
-#define MX50_INT_CTI1_TG2	(NR_IRQS_LEGACY + 89)
-#define MX50_INT_SJC		(NR_IRQS_LEGACY + 90)
-#define MX50_INT_DCP_CHAN1_3	(NR_IRQS_LEGACY + 91)
-#define MX50_INT_DCP_CHAN0	(NR_IRQS_LEGACY + 92)
-#define MX50_INT_PWM2		(NR_IRQS_LEGACY + 94)
-#define MX50_INT_RNGB		(NR_IRQS_LEGACY + 97)
-#define MX50_INT_CTI1_TG3	(NR_IRQS_LEGACY + 98)
-#define MX50_INT_RAWNAND_BCH	(NR_IRQS_LEGACY + 100)
-#define MX50_INT_RAWNAND_GPMI	(NR_IRQS_LEGACY + 102)
-#define MX50_INT_GPIO5_LOW	(NR_IRQS_LEGACY + 103)
-#define MX50_INT_GPIO5_HIGH	(NR_IRQS_LEGACY + 104)
-#define MX50_INT_GPIO6_LOW	(NR_IRQS_LEGACY + 105)
-#define MX50_INT_GPIO6_HIGH	(NR_IRQS_LEGACY + 106)
-#define MX50_INT_MSHC		(NR_IRQS_LEGACY + 109)
-#define MX50_INT_APBHDMA_CHAN0	(NR_IRQS_LEGACY + 110)
-#define MX50_INT_APBHDMA_CHAN1	(NR_IRQS_LEGACY + 111)
-#define MX50_INT_APBHDMA_CHAN2	(NR_IRQS_LEGACY + 112)
-#define MX50_INT_APBHDMA_CHAN3	(NR_IRQS_LEGACY + 113)
-#define MX50_INT_APBHDMA_CHAN4	(NR_IRQS_LEGACY + 114)
-#define MX50_INT_APBHDMA_CHAN5	(NR_IRQS_LEGACY + 115)
-#define MX50_INT_APBHDMA_CHAN6	(NR_IRQS_LEGACY + 116)
-#define MX50_INT_APBHDMA_CHAN7	(NR_IRQS_LEGACY + 117)
-
-#if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-extern int mx50_revision(void);
-#endif
-
-#endif /* ifndef __MACH_MX50_H__ */

arch/arm/mach-imx/mxc.h

@@ -32,7 +32,6 @@
 #define MXC_CPU_MX27		27
 #define MXC_CPU_MX31		31
 #define MXC_CPU_MX35		35
-#define MXC_CPU_MX50		50
 #define MXC_CPU_MX51		51
 #define MXC_CPU_MX53		53
 
@@ -126,18 +125,6 @@ extern unsigned int __mxc_cpu_type;
 # define cpu_is_mx35()		(0)
 #endif
 
-#ifdef CONFIG_SOC_IMX50
-# ifdef mxc_cpu_type
-#  undef mxc_cpu_type
-#  define mxc_cpu_type __mxc_cpu_type
-# else
-#  define mxc_cpu_type MXC_CPU_MX50
-# endif
-# define cpu_is_mx50()		(mxc_cpu_type == MXC_CPU_MX50)
-#else
-# define cpu_is_mx50()		(0)
-#endif
-
 #ifdef CONFIG_SOC_IMX51
 # ifdef mxc_cpu_type
 #  undef mxc_cpu_type

arch/arm/mach-imx/pm-imx5.c

@@ -34,7 +34,7 @@
 
 /*
  * set cpu low power mode before WFI instruction. This function is called
- * mx5 because it can be used for mx50, mx51, and mx53.
+ * mx5 because it can be used for mx51, and mx53.
  */
 static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
 {
@@ -85,10 +85,7 @@ static void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
 	__raw_writel(plat_lpc, MXC_CORTEXA8_PLAT_LPC);
 	__raw_writel(ccm_clpcr, MXC_CCM_CLPCR);
 	__raw_writel(arm_srpgcr, MXC_SRPG_ARM_SRPGCR);
-
-	/* Enable NEON SRPG for all but MX50TO1.0. */
-	if (mx50_revision() != IMX_CHIP_REVISION_1_0)
-		__raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
+	__raw_writel(arm_srpgcr, MXC_SRPG_NEON_SRPGCR);
 
 	if (stop_mode) {
 		empgc0 |= MXC_SRPGCR_PCR;