Staging: remove telephony drivers

We said we would wait until the 3.6 kernel release to remove these
drivers.  So we waited 6 months longer, that should be fine.

If anyone wants them back, it is trivial to revert these, but given that
I don't think they even build anymore, I doubt anyone will want them.

Cc: Joe Perches <joe@perches.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/Kconfig

@@ -118,8 +118,6 @@ source "drivers/staging/omapdrm/Kconfig"
 
 source "drivers/staging/android/Kconfig"
 
-source "drivers/staging/telephony/Kconfig"
-
 source "drivers/staging/ozwpan/Kconfig"
 
 source "drivers/staging/ccg/Kconfig"

drivers/staging/Makefile

@@ -52,7 +52,6 @@ obj-$(CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4)	+= ste_rmi4/
 obj-$(CONFIG_MFD_NVEC)		+= nvec/
 obj-$(CONFIG_DRM_OMAP)		+= omapdrm/
 obj-$(CONFIG_ANDROID)		+= android/
-obj-$(CONFIG_PHONE)		+= telephony/
 obj-$(CONFIG_USB_WPAN_HCD)	+= ozwpan/
 obj-$(CONFIG_USB_G_CCG)		+= ccg/
 obj-$(CONFIG_WIMAX_GDM72XX)	+= gdm72xx/

drivers/staging/telephony/Kconfig

-#
-# Telephony device configuration
-#
-
-menuconfig PHONE
-	tristate "Telephony support"
-	depends on HAS_IOMEM
-	---help---
-	  Say Y here if you have a telephony card, which for example allows
-	  you to use a regular phone for voice-over-IP applications.
-
-	  Note: this has nothing to do with modems.  You do not need to say Y
-	  here in order to be able to use a modem under Linux.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called phonedev.
-
-if PHONE
-
-config PHONE_IXJ
-	tristate "QuickNet Internet LineJack/PhoneJack support"
-	depends on ISA || PCI
-	---help---
-	  Say M if you have a telephony card manufactured by Quicknet
-	  Technologies, Inc.  These include the Internet PhoneJACK and
-	  Internet LineJACK Telephony Cards. You will get a module called
-	  ixj.
-
-	  For the ISA versions of these products, you can configure the
-	  cards using the isapnp tools (pnpdump/isapnp) or you can use the
-	  isapnp support.  Please read <file:Documentation/telephony/ixj.txt>.
-
-	  For more information on these cards, see Quicknet's web site at:
-	  <http://www.quicknet.net/>.
-
-	  If you do not have any Quicknet telephony cards, you can safely
-	  say N here.
-
-config PHONE_IXJ_PCMCIA
-	tristate "QuickNet Internet LineJack/PhoneJack PCMCIA support"
-	depends on PHONE_IXJ && PCMCIA
-	help
-	  Say Y here to configure in PCMCIA service support for the Quicknet
-	  cards manufactured by Quicknet Technologies, Inc.  This changes the
-	  card initialization code to work with the card manager daemon.
-
-endif # PHONE

drivers/staging/telephony/Makefile

-#
-# Makefile for drivers/telephony
-#
-
-obj-$(CONFIG_PHONE) += phonedev.o
-obj-$(CONFIG_PHONE_IXJ) += ixj.o
-obj-$(CONFIG_PHONE_IXJ_PCMCIA) += ixj_pcmcia.o

drivers/staging/telephony/TODO

-TODO
-. Determine if the boards are still in use
-  and move this module back to drivers/telephony if necessary
-. Coding style cleanups
-
-Please send patches to Greg Kroah-Hartman <greg@kroah.com> and
-cc Joe Perches <joe@perches.com> if the module should be reactivated.
-
-If no module activity occurs before version 3.6 is released, this
-module should be removed.

drivers/staging/telephony/ixj-ver.h

-/* configuration management identifiers */
-#define IXJ_VER_MAJOR 1
-#define IXJ_VER_MINOR 0
-#define IXJ_BLD_VER   1

drivers/staging/telephony/ixj_pcmcia.c

-#include "ixj-ver.h"
-
-#include <linux/module.h>
-
-#include <linux/init.h>
-#include <linux/kernel.h>	/* printk() */
-#include <linux/fs.h>		/* everything... */
-#include <linux/errno.h>	/* error codes */
-#include <linux/slab.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ds.h>
-
-#include "ixj.h"
-
-/*
- *	PCMCIA service support for Quicknet cards
- */
- 
-
-typedef struct ixj_info_t {
-	int ndev;
-	struct ixj *port;
-} ixj_info_t;
-
-static void ixj_detach(struct pcmcia_device *p_dev);
-static int ixj_config(struct pcmcia_device * link);
-static void ixj_cs_release(struct pcmcia_device * link);
-
-static int ixj_probe(struct pcmcia_device *p_dev)
-{
-	dev_dbg(&p_dev->dev, "ixj_attach()\n");
-	/* Create new ixj device */
-	p_dev->priv = kzalloc(sizeof(struct ixj_info_t), GFP_KERNEL);
-	if (!p_dev->priv) {
-		return -ENOMEM;
-	}
-
-	return ixj_config(p_dev);
-}
-
-static void ixj_detach(struct pcmcia_device *link)
-{
-	dev_dbg(&link->dev, "ixj_detach\n");
-
-	ixj_cs_release(link);
-
-        kfree(link->priv);
-}
-
-static void ixj_get_serial(struct pcmcia_device * link, IXJ * j)
-{
-	char *str;
-	int i, place;
-	dev_dbg(&link->dev, "ixj_get_serial\n");
-
-	str = link->prod_id[0];
-	if (!str)
-		goto failed;
-	printk("%s", str);
-	str = link->prod_id[1];
-	if (!str)
-		goto failed;
-	printk(" %s", str);
-	str = link->prod_id[2];
-	if (!str)
-		goto failed;
-	place = 1;
-	for (i = strlen(str) - 1; i >= 0; i--) {
-		switch (str[i]) {
-		case '0':
-		case '1':
-		case '2':
-		case '3':
-		case '4':
-		case '5':
-		case '6':
-		case '7':
-		case '8':
-		case '9':
-			j->serial += (str[i] - 48) * place;
-			break;
-		case 'A':
-		case 'B':
-		case 'C':
-		case 'D':
-		case 'E':
-		case 'F':
-			j->serial += (str[i] - 55) * place;
-			break;
-		case 'a':
-		case 'b':
-		case 'c':
-		case 'd':
-		case 'e':
-		case 'f':
-			j->serial += (str[i] - 87) * place;
-			break;
-		}
-		place = place * 0x10;
-	}
-	str = link->prod_id[3];
-	if (!str)
-		goto failed;
-	printk(" version %s\n", str);
-failed:
-	return;
-}
-
-static int ixj_config_check(struct pcmcia_device *p_dev, void *priv_data)
-{
-	p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
-	p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
-	p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
-	p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
-	p_dev->io_lines = 3;
-
-	return pcmcia_request_io(p_dev);
-}
-
-static int ixj_config(struct pcmcia_device * link)
-{
-	IXJ *j;
-	ixj_info_t *info;
-
-	info = link->priv;
-	dev_dbg(&link->dev, "ixj_config\n");
-
-	link->config_flags = CONF_AUTO_SET_IO;
-
-	if (pcmcia_loop_config(link, ixj_config_check, NULL))
-		goto failed;
-
-	if (pcmcia_enable_device(link))
-		goto failed;
-
-	/*
- 	 *	Register the card with the core.
-	 */
-	j = ixj_pcmcia_probe(link->resource[0]->start,
-			     link->resource[0]->start + 0x10);
-
-	info->ndev = 1;
-	ixj_get_serial(link, j);
-	return 0;
-
-failed:
-	ixj_cs_release(link);
-	return -ENODEV;
-}
-
-static void ixj_cs_release(struct pcmcia_device *link)
-{
-	ixj_info_t *info = link->priv;
-	dev_dbg(&link->dev, "ixj_cs_release\n");
-	info->ndev = 0;
-	pcmcia_disable_device(link);
-}
-
-static const struct pcmcia_device_id ixj_ids[] = {
-	PCMCIA_DEVICE_MANF_CARD(0x0257, 0x0600),
-	PCMCIA_DEVICE_NULL
-};
-MODULE_DEVICE_TABLE(pcmcia, ixj_ids);
-
-static struct pcmcia_driver ixj_driver = {
-	.owner		= THIS_MODULE,
-	.name		= "ixj_cs",
-	.probe		= ixj_probe,
-	.remove		= ixj_detach,
-	.id_table	= ixj_ids,
-};
-
-static int __init ixj_pcmcia_init(void)
-{
-	return pcmcia_register_driver(&ixj_driver);
-}
-
-static void ixj_pcmcia_exit(void)
-{
-	pcmcia_unregister_driver(&ixj_driver);
-}
-
-module_init(ixj_pcmcia_init);
-module_exit(ixj_pcmcia_exit);
-
-MODULE_LICENSE("GPL");

drivers/staging/telephony/phonedev.c

-/*
- *            Telephony registration for Linux
- *
- *              (c) Copyright 1999 Red Hat Software Inc.
- *
- *              This program is free software; you can redistribute it and/or
- *              modify it under the terms of the GNU General Public License
- *              as published by the Free Software Foundation; either version
- *              2 of the License, or (at your option) any later version.
- *
- * Author:      Alan Cox, <alan@lxorguk.ukuu.org.uk>
- *
- * Fixes:       Mar 01 2000 Thomas Sparr, <thomas.l.sparr@telia.com>
- *              phone_register_device now works with unit!=PHONE_UNIT_ANY
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/phonedev.h>
-#include <linux/init.h>
-#include <asm/uaccess.h>
-
-#include <linux/kmod.h>
-#include <linux/sem.h>
-#include <linux/mutex.h>
-
-#define PHONE_NUM_DEVICES	256
-
-/*
- *    Active devices 
- */
-
-static struct phone_device *phone_device[PHONE_NUM_DEVICES];
-static DEFINE_MUTEX(phone_lock);
-
-/*
- *    Open a phone device.
- */
-
-static int phone_open(struct inode *inode, struct file *file)
-{
-	unsigned int minor = iminor(inode);
-	int err = 0;
-	struct phone_device *p;
-	const struct file_operations *old_fops, *new_fops = NULL;
-
-	if (minor >= PHONE_NUM_DEVICES)
-		return -ENODEV;
-
-	mutex_lock(&phone_lock);
-	p = phone_device[minor];
-	if (p)
-		new_fops = fops_get(p->f_op);
-	if (!new_fops) {
-		mutex_unlock(&phone_lock);
-		request_module("char-major-%d-%d", PHONE_MAJOR, minor);
-		mutex_lock(&phone_lock);
-		p = phone_device[minor];
-		if (p == NULL || (new_fops = fops_get(p->f_op)) == NULL)
-		{
-			err=-ENODEV;
-			goto end;
-		}
-	}
-	old_fops = file->f_op;
-	file->f_op = new_fops;
-	if (p->open)
-		err = p->open(p, file);	/* Tell the device it is open */
-	if (err) {
-		fops_put(file->f_op);
-		file->f_op = fops_get(old_fops);
-	}
-	fops_put(old_fops);
-end:
-	mutex_unlock(&phone_lock);
-	return err;
-}
-
-/*
- *    Telephony For Linux device drivers request registration here.
- */
-
-int phone_register_device(struct phone_device *p, int unit)
-{
-	int base;
-	int end;
-	int i;
-
-	base = 0;
-	end = PHONE_NUM_DEVICES - 1;
-
-	if (unit != PHONE_UNIT_ANY) {
-		base = unit;
-		end = unit + 1;  /* enter the loop at least one time */
-	}
-	
-	mutex_lock(&phone_lock);
-	for (i = base; i < end; i++) {
-		if (phone_device[i] == NULL) {
-			phone_device[i] = p;
-			p->minor = i;
-			mutex_unlock(&phone_lock);
-			return 0;
-		}
-	}
-	mutex_unlock(&phone_lock);
-	return -ENFILE;
-}
-
-/*
- *    Unregister an unused Telephony for linux device
- */
-
-void phone_unregister_device(struct phone_device *pfd)
-{
-	mutex_lock(&phone_lock);
-	if (likely(phone_device[pfd->minor] == pfd))
-		phone_device[pfd->minor] = NULL;
-	mutex_unlock(&phone_lock);
-}
-
-
-static const struct file_operations phone_fops =
-{
-	.owner		= THIS_MODULE,
-	.open		= phone_open,
-	.llseek		= noop_llseek,
-};
-
-/*
- *	Board init functions
- */
- 
-
-/*
- *    Initialise Telephony for linux
- */
-
-static int __init telephony_init(void)
-{
-	printk(KERN_INFO "Linux telephony interface: v1.00\n");
-	if (register_chrdev(PHONE_MAJOR, "telephony", &phone_fops)) {
-		printk("phonedev: unable to get major %d\n", PHONE_MAJOR);
-		return -EIO;
-	}
-
-	return 0;
-}
-
-static void __exit telephony_exit(void)
-{
-	unregister_chrdev(PHONE_MAJOR, "telephony");
-}
-
-module_init(telephony_init);
-module_exit(telephony_exit);
-
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(phone_register_device);
-EXPORT_SYMBOL(phone_unregister_device);