提交 72adf242 编写于 作者: A Anirudh Venkataramanan 提交者: Jeff Kirsher

ice: Move common functions out of ice_main.c part 2/7

This patch continues the code move out of ice_main.c

The following top level functions (and related dependency functions) were
moved to ice_lib.c:
ice_vsi_start_rx_rings
ice_vsi_stop_rx_rings
ice_vsi_stop_tx_rings
ice_vsi_cfg_rxqs
ice_vsi_cfg_txqs
ice_vsi_cfg_msix
Signed-off-by: NAnirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 45d3d428
......@@ -4,6 +4,227 @@
#include "ice.h"
#include "ice_lib.h"
/**
* ice_setup_rx_ctx - Configure a receive ring context
* @ring: The Rx ring to configure
*
* Configure the Rx descriptor ring in RLAN context.
*/
static int ice_setup_rx_ctx(struct ice_ring *ring)
{
struct ice_vsi *vsi = ring->vsi;
struct ice_hw *hw = &vsi->back->hw;
u32 rxdid = ICE_RXDID_FLEX_NIC;
struct ice_rlan_ctx rlan_ctx;
u32 regval;
u16 pf_q;
int err;
/* what is RX queue number in global space of 2K Rx queues */
pf_q = vsi->rxq_map[ring->q_index];
/* clear the context structure first */
memset(&rlan_ctx, 0, sizeof(rlan_ctx));
rlan_ctx.base = ring->dma >> 7;
rlan_ctx.qlen = ring->count;
/* Receive Packet Data Buffer Size.
* The Packet Data Buffer Size is defined in 128 byte units.
*/
rlan_ctx.dbuf = vsi->rx_buf_len >> ICE_RLAN_CTX_DBUF_S;
/* use 32 byte descriptors */
rlan_ctx.dsize = 1;
/* Strip the Ethernet CRC bytes before the packet is posted to host
* memory.
*/
rlan_ctx.crcstrip = 1;
/* L2TSEL flag defines the reported L2 Tags in the receive descriptor */
rlan_ctx.l2tsel = 1;
rlan_ctx.dtype = ICE_RX_DTYPE_NO_SPLIT;
rlan_ctx.hsplit_0 = ICE_RLAN_RX_HSPLIT_0_NO_SPLIT;
rlan_ctx.hsplit_1 = ICE_RLAN_RX_HSPLIT_1_NO_SPLIT;
/* This controls whether VLAN is stripped from inner headers
* The VLAN in the inner L2 header is stripped to the receive
* descriptor if enabled by this flag.
*/
rlan_ctx.showiv = 0;
/* Max packet size for this queue - must not be set to a larger value
* than 5 x DBUF
*/
rlan_ctx.rxmax = min_t(u16, vsi->max_frame,
ICE_MAX_CHAINED_RX_BUFS * vsi->rx_buf_len);
/* Rx queue threshold in units of 64 */
rlan_ctx.lrxqthresh = 1;
/* Enable Flexible Descriptors in the queue context which
* allows this driver to select a specific receive descriptor format
*/
regval = rd32(hw, QRXFLXP_CNTXT(pf_q));
regval |= (rxdid << QRXFLXP_CNTXT_RXDID_IDX_S) &
QRXFLXP_CNTXT_RXDID_IDX_M;
/* increasing context priority to pick up profile id;
* default is 0x01; setting to 0x03 to ensure profile
* is programming if prev context is of same priority
*/
regval |= (0x03 << QRXFLXP_CNTXT_RXDID_PRIO_S) &
QRXFLXP_CNTXT_RXDID_PRIO_M;
wr32(hw, QRXFLXP_CNTXT(pf_q), regval);
/* Absolute queue number out of 2K needs to be passed */
err = ice_write_rxq_ctx(hw, &rlan_ctx, pf_q);
if (err) {
dev_err(&vsi->back->pdev->dev,
"Failed to set LAN Rx queue context for absolute Rx queue %d error: %d\n",
pf_q, err);
return -EIO;
}
/* init queue specific tail register */
ring->tail = hw->hw_addr + QRX_TAIL(pf_q);
writel(0, ring->tail);
ice_alloc_rx_bufs(ring, ICE_DESC_UNUSED(ring));
return 0;
}
/**
* ice_setup_tx_ctx - setup a struct ice_tlan_ctx instance
* @ring: The Tx ring to configure
* @tlan_ctx: Pointer to the Tx LAN queue context structure to be initialized
* @pf_q: queue index in the PF space
*
* Configure the Tx descriptor ring in TLAN context.
*/
static void
ice_setup_tx_ctx(struct ice_ring *ring, struct ice_tlan_ctx *tlan_ctx, u16 pf_q)
{
struct ice_vsi *vsi = ring->vsi;
struct ice_hw *hw = &vsi->back->hw;
tlan_ctx->base = ring->dma >> ICE_TLAN_CTX_BASE_S;
tlan_ctx->port_num = vsi->port_info->lport;
/* Transmit Queue Length */
tlan_ctx->qlen = ring->count;
/* PF number */
tlan_ctx->pf_num = hw->pf_id;
/* queue belongs to a specific VSI type
* VF / VM index should be programmed per vmvf_type setting:
* for vmvf_type = VF, it is VF number between 0-256
* for vmvf_type = VM, it is VM number between 0-767
* for PF or EMP this field should be set to zero
*/
switch (vsi->type) {
case ICE_VSI_PF:
tlan_ctx->vmvf_type = ICE_TLAN_CTX_VMVF_TYPE_PF;
break;
default:
return;
}
/* make sure the context is associated with the right VSI */
tlan_ctx->src_vsi = vsi->vsi_num;
tlan_ctx->tso_ena = ICE_TX_LEGACY;
tlan_ctx->tso_qnum = pf_q;
/* Legacy or Advanced Host Interface:
* 0: Advanced Host Interface
* 1: Legacy Host Interface
*/
tlan_ctx->legacy_int = ICE_TX_LEGACY;
}
/**
* ice_pf_rxq_wait - Wait for a PF's Rx queue to be enabled or disabled
* @pf: the PF being configured
* @pf_q: the PF queue
* @ena: enable or disable state of the queue
*
* This routine will wait for the given Rx queue of the PF to reach the
* enabled or disabled state.
* Returns -ETIMEDOUT in case of failing to reach the requested state after
* multiple retries; else will return 0 in case of success.
*/
static int ice_pf_rxq_wait(struct ice_pf *pf, int pf_q, bool ena)
{
int i;
for (i = 0; i < ICE_Q_WAIT_RETRY_LIMIT; i++) {
u32 rx_reg = rd32(&pf->hw, QRX_CTRL(pf_q));
if (ena == !!(rx_reg & QRX_CTRL_QENA_STAT_M))
break;
usleep_range(10, 20);
}
if (i >= ICE_Q_WAIT_RETRY_LIMIT)
return -ETIMEDOUT;
return 0;
}
/**
* ice_vsi_ctrl_rx_rings - Start or stop a VSI's Rx rings
* @vsi: the VSI being configured
* @ena: start or stop the Rx rings
*/
static int ice_vsi_ctrl_rx_rings(struct ice_vsi *vsi, bool ena)
{
struct ice_pf *pf = vsi->back;
struct ice_hw *hw = &pf->hw;
int i, j, ret = 0;
for (i = 0; i < vsi->num_rxq; i++) {
int pf_q = vsi->rxq_map[i];
u32 rx_reg;
for (j = 0; j < ICE_Q_WAIT_MAX_RETRY; j++) {
rx_reg = rd32(hw, QRX_CTRL(pf_q));
if (((rx_reg >> QRX_CTRL_QENA_REQ_S) & 1) ==
((rx_reg >> QRX_CTRL_QENA_STAT_S) & 1))
break;
usleep_range(1000, 2000);
}
/* Skip if the queue is already in the requested state */
if (ena == !!(rx_reg & QRX_CTRL_QENA_STAT_M))
continue;
/* turn on/off the queue */
if (ena)
rx_reg |= QRX_CTRL_QENA_REQ_M;
else
rx_reg &= ~QRX_CTRL_QENA_REQ_M;
wr32(hw, QRX_CTRL(pf_q), rx_reg);
/* wait for the change to finish */
ret = ice_pf_rxq_wait(pf, pf_q, ena);
if (ret) {
dev_err(&pf->pdev->dev,
"VSI idx %d Rx ring %d %sable timeout\n",
vsi->idx, pf_q, (ena ? "en" : "dis"));
break;
}
}
return ret;
}
/**
* ice_add_mac_to_list - Add a mac address filter entry to the list
* @vsi: the VSI to be forwarded to
......@@ -185,6 +406,174 @@ int ice_vsi_kill_vlan(struct ice_vsi *vsi, u16 vid)
return status;
}
/**
* ice_vsi_cfg_rxqs - Configure the VSI for Rx
* @vsi: the VSI being configured
*
* Return 0 on success and a negative value on error
* Configure the Rx VSI for operation.
*/
int ice_vsi_cfg_rxqs(struct ice_vsi *vsi)
{
int err = 0;
u16 i;
if (vsi->netdev && vsi->netdev->mtu > ETH_DATA_LEN)
vsi->max_frame = vsi->netdev->mtu +
ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
else
vsi->max_frame = ICE_RXBUF_2048;
vsi->rx_buf_len = ICE_RXBUF_2048;
/* set up individual rings */
for (i = 0; i < vsi->num_rxq && !err; i++)
err = ice_setup_rx_ctx(vsi->rx_rings[i]);
if (err) {
dev_err(&vsi->back->pdev->dev, "ice_setup_rx_ctx failed\n");
return -EIO;
}
return err;
}
/**
* ice_vsi_cfg_txqs - Configure the VSI for Tx
* @vsi: the VSI being configured
*
* Return 0 on success and a negative value on error
* Configure the Tx VSI for operation.
*/
int ice_vsi_cfg_txqs(struct ice_vsi *vsi)
{
struct ice_aqc_add_tx_qgrp *qg_buf;
struct ice_aqc_add_txqs_perq *txq;
struct ice_pf *pf = vsi->back;
enum ice_status status;
u16 buf_len, i, pf_q;
int err = 0, tc = 0;
u8 num_q_grps;
buf_len = sizeof(struct ice_aqc_add_tx_qgrp);
qg_buf = devm_kzalloc(&pf->pdev->dev, buf_len, GFP_KERNEL);
if (!qg_buf)
return -ENOMEM;
if (vsi->num_txq > ICE_MAX_TXQ_PER_TXQG) {
err = -EINVAL;
goto err_cfg_txqs;
}
qg_buf->num_txqs = 1;
num_q_grps = 1;
/* set up and configure the Tx queues */
ice_for_each_txq(vsi, i) {
struct ice_tlan_ctx tlan_ctx = { 0 };
pf_q = vsi->txq_map[i];
ice_setup_tx_ctx(vsi->tx_rings[i], &tlan_ctx, pf_q);
/* copy context contents into the qg_buf */
qg_buf->txqs[0].txq_id = cpu_to_le16(pf_q);
ice_set_ctx((u8 *)&tlan_ctx, qg_buf->txqs[0].txq_ctx,
ice_tlan_ctx_info);
/* init queue specific tail reg. It is referred as transmit
* comm scheduler queue doorbell.
*/
vsi->tx_rings[i]->tail = pf->hw.hw_addr + QTX_COMM_DBELL(pf_q);
status = ice_ena_vsi_txq(vsi->port_info, vsi->vsi_num, tc,
num_q_grps, qg_buf, buf_len, NULL);
if (status) {
dev_err(&vsi->back->pdev->dev,
"Failed to set LAN Tx queue context, error: %d\n",
status);
err = -ENODEV;
goto err_cfg_txqs;
}
/* Add Tx Queue TEID into the VSI Tx ring from the response
* This will complete configuring and enabling the queue.
*/
txq = &qg_buf->txqs[0];
if (pf_q == le16_to_cpu(txq->txq_id))
vsi->tx_rings[i]->txq_teid =
le32_to_cpu(txq->q_teid);
}
err_cfg_txqs:
devm_kfree(&pf->pdev->dev, qg_buf);
return err;
}
/**
* ice_vsi_cfg_msix - MSIX mode Interrupt Config in the HW
* @vsi: the VSI being configured
*/
void ice_vsi_cfg_msix(struct ice_vsi *vsi)
{
struct ice_pf *pf = vsi->back;
u16 vector = vsi->base_vector;
struct ice_hw *hw = &pf->hw;
u32 txq = 0, rxq = 0;
int i, q, itr;
u8 itr_gran;
for (i = 0; i < vsi->num_q_vectors; i++, vector++) {
struct ice_q_vector *q_vector = vsi->q_vectors[i];
itr_gran = hw->itr_gran_200;
if (q_vector->num_ring_rx) {
q_vector->rx.itr =
ITR_TO_REG(vsi->rx_rings[rxq]->rx_itr_setting,
itr_gran);
q_vector->rx.latency_range = ICE_LOW_LATENCY;
}
if (q_vector->num_ring_tx) {
q_vector->tx.itr =
ITR_TO_REG(vsi->tx_rings[txq]->tx_itr_setting,
itr_gran);
q_vector->tx.latency_range = ICE_LOW_LATENCY;
}
wr32(hw, GLINT_ITR(ICE_RX_ITR, vector), q_vector->rx.itr);
wr32(hw, GLINT_ITR(ICE_TX_ITR, vector), q_vector->tx.itr);
/* Both Transmit Queue Interrupt Cause Control register
* and Receive Queue Interrupt Cause control register
* expects MSIX_INDX field to be the vector index
* within the function space and not the absolute
* vector index across PF or across device.
* For SR-IOV VF VSIs queue vector index always starts
* with 1 since first vector index(0) is used for OICR
* in VF space. Since VMDq and other PF VSIs are within
* the PF function space, use the vector index that is
* tracked for this PF.
*/
for (q = 0; q < q_vector->num_ring_tx; q++) {
u32 val;
itr = ICE_ITR_NONE;
val = QINT_TQCTL_CAUSE_ENA_M |
(itr << QINT_TQCTL_ITR_INDX_S) |
(vector << QINT_TQCTL_MSIX_INDX_S);
wr32(hw, QINT_TQCTL(vsi->txq_map[txq]), val);
txq++;
}
for (q = 0; q < q_vector->num_ring_rx; q++) {
u32 val;
itr = ICE_ITR_NONE;
val = QINT_RQCTL_CAUSE_ENA_M |
(itr << QINT_RQCTL_ITR_INDX_S) |
(vector << QINT_RQCTL_MSIX_INDX_S);
wr32(hw, QINT_RQCTL(vsi->rxq_map[rxq]), val);
rxq++;
}
}
ice_flush(hw);
}
/**
* ice_vsi_manage_vlan_insertion - Manage VLAN insertion for the VSI for Tx
* @vsi: the VSI being changed
......@@ -256,3 +645,105 @@ int ice_vsi_manage_vlan_stripping(struct ice_vsi *vsi, bool ena)
vsi->info.vlan_flags = ctxt.info.vlan_flags;
return 0;
}
/**
* ice_vsi_start_rx_rings - start VSI's Rx rings
* @vsi: the VSI whose rings are to be started
*
* Returns 0 on success and a negative value on error
*/
int ice_vsi_start_rx_rings(struct ice_vsi *vsi)
{
return ice_vsi_ctrl_rx_rings(vsi, true);
}
/**
* ice_vsi_stop_rx_rings - stop VSI's Rx rings
* @vsi: the VSI
*
* Returns 0 on success and a negative value on error
*/
int ice_vsi_stop_rx_rings(struct ice_vsi *vsi)
{
return ice_vsi_ctrl_rx_rings(vsi, false);
}
/**
* ice_vsi_stop_tx_rings - Disable Tx rings
* @vsi: the VSI being configured
*/
int ice_vsi_stop_tx_rings(struct ice_vsi *vsi)
{
struct ice_pf *pf = vsi->back;
struct ice_hw *hw = &pf->hw;
enum ice_status status;
u32 *q_teids, val;
u16 *q_ids, i;
int err = 0;
if (vsi->num_txq > ICE_LAN_TXQ_MAX_QDIS)
return -EINVAL;
q_teids = devm_kcalloc(&pf->pdev->dev, vsi->num_txq, sizeof(*q_teids),
GFP_KERNEL);
if (!q_teids)
return -ENOMEM;
q_ids = devm_kcalloc(&pf->pdev->dev, vsi->num_txq, sizeof(*q_ids),
GFP_KERNEL);
if (!q_ids) {
err = -ENOMEM;
goto err_alloc_q_ids;
}
/* set up the Tx queue list to be disabled */
ice_for_each_txq(vsi, i) {
u16 v_idx;
if (!vsi->tx_rings || !vsi->tx_rings[i]) {
err = -EINVAL;
goto err_out;
}
q_ids[i] = vsi->txq_map[i];
q_teids[i] = vsi->tx_rings[i]->txq_teid;
/* clear cause_ena bit for disabled queues */
val = rd32(hw, QINT_TQCTL(vsi->tx_rings[i]->reg_idx));
val &= ~QINT_TQCTL_CAUSE_ENA_M;
wr32(hw, QINT_TQCTL(vsi->tx_rings[i]->reg_idx), val);
/* software is expected to wait for 100 ns */
ndelay(100);
/* trigger a software interrupt for the vector associated to
* the queue to schedule NAPI handler
*/
v_idx = vsi->tx_rings[i]->q_vector->v_idx;
wr32(hw, GLINT_DYN_CTL(vsi->base_vector + v_idx),
GLINT_DYN_CTL_SWINT_TRIG_M | GLINT_DYN_CTL_INTENA_MSK_M);
}
status = ice_dis_vsi_txq(vsi->port_info, vsi->num_txq, q_ids, q_teids,
NULL);
/* if the disable queue command was exercised during an active reset
* flow, ICE_ERR_RESET_ONGOING is returned. This is not an error as
* the reset operation disables queues at the hardware level anyway.
*/
if (status == ICE_ERR_RESET_ONGOING) {
dev_info(&pf->pdev->dev,
"Reset in progress. LAN Tx queues already disabled\n");
} else if (status) {
dev_err(&pf->pdev->dev,
"Failed to disable LAN Tx queues, error: %d\n",
status);
err = -ENODEV;
}
err_out:
devm_kfree(&pf->pdev->dev, q_ids);
err_alloc_q_ids:
devm_kfree(&pf->pdev->dev, q_teids);
return err;
}
......@@ -13,6 +13,12 @@ void ice_free_fltr_list(struct device *dev, struct list_head *h);
void ice_update_eth_stats(struct ice_vsi *vsi);
int ice_vsi_cfg_rxqs(struct ice_vsi *vsi);
int ice_vsi_cfg_txqs(struct ice_vsi *vsi);
void ice_vsi_cfg_msix(struct ice_vsi *vsi);
int ice_vsi_add_vlan(struct ice_vsi *vsi, u16 vid);
int ice_vsi_kill_vlan(struct ice_vsi *vsi, u16 vid);
......@@ -20,4 +26,11 @@ int ice_vsi_kill_vlan(struct ice_vsi *vsi, u16 vid);
int ice_vsi_manage_vlan_insertion(struct ice_vsi *vsi);
int ice_vsi_manage_vlan_stripping(struct ice_vsi *vsi, bool ena);
int ice_vsi_start_rx_rings(struct ice_vsi *vsi);
int ice_vsi_stop_rx_rings(struct ice_vsi *vsi);
int ice_vsi_stop_tx_rings(struct ice_vsi *vsi);
#endif /* !_ICE_LIB_H_ */
......@@ -1844,77 +1844,6 @@ static void ice_vsi_free_irq(struct ice_vsi *vsi)
}
}
/**
* ice_vsi_cfg_msix - MSIX mode Interrupt Config in the HW
* @vsi: the VSI being configured
*/
static void ice_vsi_cfg_msix(struct ice_vsi *vsi)
{
struct ice_pf *pf = vsi->back;
u16 vector = vsi->base_vector;
struct ice_hw *hw = &pf->hw;
u32 txq = 0, rxq = 0;
int i, q, itr;
u8 itr_gran;
for (i = 0; i < vsi->num_q_vectors; i++, vector++) {
struct ice_q_vector *q_vector = vsi->q_vectors[i];
itr_gran = hw->itr_gran_200;
if (q_vector->num_ring_rx) {
q_vector->rx.itr =
ITR_TO_REG(vsi->rx_rings[rxq]->rx_itr_setting,
itr_gran);
q_vector->rx.latency_range = ICE_LOW_LATENCY;
}
if (q_vector->num_ring_tx) {
q_vector->tx.itr =
ITR_TO_REG(vsi->tx_rings[txq]->tx_itr_setting,
itr_gran);
q_vector->tx.latency_range = ICE_LOW_LATENCY;
}
wr32(hw, GLINT_ITR(ICE_RX_ITR, vector), q_vector->rx.itr);
wr32(hw, GLINT_ITR(ICE_TX_ITR, vector), q_vector->tx.itr);
/* Both Transmit Queue Interrupt Cause Control register
* and Receive Queue Interrupt Cause control register
* expects MSIX_INDX field to be the vector index
* within the function space and not the absolute
* vector index across PF or across device.
* For SR-IOV VF VSIs queue vector index always starts
* with 1 since first vector index(0) is used for OICR
* in VF space. Since VMDq and other PF VSIs are withtin
* the PF function space, use the vector index thats
* tracked for this PF.
*/
for (q = 0; q < q_vector->num_ring_tx; q++) {
u32 val;
itr = ICE_TX_ITR;
val = QINT_TQCTL_CAUSE_ENA_M |
(itr << QINT_TQCTL_ITR_INDX_S) |
(vector << QINT_TQCTL_MSIX_INDX_S);
wr32(hw, QINT_TQCTL(vsi->txq_map[txq]), val);
txq++;
}
for (q = 0; q < q_vector->num_ring_rx; q++) {
u32 val;
itr = ICE_RX_ITR;
val = QINT_RQCTL_CAUSE_ENA_M |
(itr << QINT_RQCTL_ITR_INDX_S) |
(vector << QINT_RQCTL_MSIX_INDX_S);
wr32(hw, QINT_RQCTL(vsi->rxq_map[rxq]), val);
rxq++;
}
}
ice_flush(hw);
}
/**
* ice_ena_misc_vector - enable the non-queue interrupts
* @pf: board private structure
......@@ -3966,248 +3895,6 @@ static int ice_restore_vlan(struct ice_vsi *vsi)
return err;
}
/**
* ice_setup_tx_ctx - setup a struct ice_tlan_ctx instance
* @ring: The Tx ring to configure
* @tlan_ctx: Pointer to the Tx LAN queue context structure to be initialized
* @pf_q: queue index in the PF space
*
* Configure the Tx descriptor ring in TLAN context.
*/
static void
ice_setup_tx_ctx(struct ice_ring *ring, struct ice_tlan_ctx *tlan_ctx, u16 pf_q)
{
struct ice_vsi *vsi = ring->vsi;
struct ice_hw *hw = &vsi->back->hw;
tlan_ctx->base = ring->dma >> ICE_TLAN_CTX_BASE_S;
tlan_ctx->port_num = vsi->port_info->lport;
/* Transmit Queue Length */
tlan_ctx->qlen = ring->count;
/* PF number */
tlan_ctx->pf_num = hw->pf_id;
/* queue belongs to a specific VSI type
* VF / VM index should be programmed per vmvf_type setting:
* for vmvf_type = VF, it is VF number between 0-256
* for vmvf_type = VM, it is VM number between 0-767
* for PF or EMP this field should be set to zero
*/
switch (vsi->type) {
case ICE_VSI_PF:
tlan_ctx->vmvf_type = ICE_TLAN_CTX_VMVF_TYPE_PF;
break;
default:
return;
}
/* make sure the context is associated with the right VSI */
tlan_ctx->src_vsi = vsi->vsi_num;
tlan_ctx->tso_ena = ICE_TX_LEGACY;
tlan_ctx->tso_qnum = pf_q;
/* Legacy or Advanced Host Interface:
* 0: Advanced Host Interface
* 1: Legacy Host Interface
*/
tlan_ctx->legacy_int = ICE_TX_LEGACY;
}
/**
* ice_vsi_cfg_txqs - Configure the VSI for Tx
* @vsi: the VSI being configured
*
* Return 0 on success and a negative value on error
* Configure the Tx VSI for operation.
*/
static int ice_vsi_cfg_txqs(struct ice_vsi *vsi)
{
struct ice_aqc_add_tx_qgrp *qg_buf;
struct ice_aqc_add_txqs_perq *txq;
struct ice_pf *pf = vsi->back;
enum ice_status status;
u16 buf_len, i, pf_q;
int err = 0, tc = 0;
u8 num_q_grps;
buf_len = sizeof(struct ice_aqc_add_tx_qgrp);
qg_buf = devm_kzalloc(&pf->pdev->dev, buf_len, GFP_KERNEL);
if (!qg_buf)
return -ENOMEM;
if (vsi->num_txq > ICE_MAX_TXQ_PER_TXQG) {
err = -EINVAL;
goto err_cfg_txqs;
}
qg_buf->num_txqs = 1;
num_q_grps = 1;
/* set up and configure the tx queues */
ice_for_each_txq(vsi, i) {
struct ice_tlan_ctx tlan_ctx = { 0 };
pf_q = vsi->txq_map[i];
ice_setup_tx_ctx(vsi->tx_rings[i], &tlan_ctx, pf_q);
/* copy context contents into the qg_buf */
qg_buf->txqs[0].txq_id = cpu_to_le16(pf_q);
ice_set_ctx((u8 *)&tlan_ctx, qg_buf->txqs[0].txq_ctx,
ice_tlan_ctx_info);
/* init queue specific tail reg. It is referred as transmit
* comm scheduler queue doorbell.
*/
vsi->tx_rings[i]->tail = pf->hw.hw_addr + QTX_COMM_DBELL(pf_q);
status = ice_ena_vsi_txq(vsi->port_info, vsi->vsi_num, tc,
num_q_grps, qg_buf, buf_len, NULL);
if (status) {
dev_err(&vsi->back->pdev->dev,
"Failed to set LAN Tx queue context, error: %d\n",
status);
err = -ENODEV;
goto err_cfg_txqs;
}
/* Add Tx Queue TEID into the VSI tx ring from the response
* This will complete configuring and enabling the queue.
*/
txq = &qg_buf->txqs[0];
if (pf_q == le16_to_cpu(txq->txq_id))
vsi->tx_rings[i]->txq_teid =
le32_to_cpu(txq->q_teid);
}
err_cfg_txqs:
devm_kfree(&pf->pdev->dev, qg_buf);
return err;
}
/**
* ice_setup_rx_ctx - Configure a receive ring context
* @ring: The Rx ring to configure
*
* Configure the Rx descriptor ring in RLAN context.
*/
static int ice_setup_rx_ctx(struct ice_ring *ring)
{
struct ice_vsi *vsi = ring->vsi;
struct ice_hw *hw = &vsi->back->hw;
u32 rxdid = ICE_RXDID_FLEX_NIC;
struct ice_rlan_ctx rlan_ctx;
u32 regval;
u16 pf_q;
int err;
/* what is RX queue number in global space of 2K rx queues */
pf_q = vsi->rxq_map[ring->q_index];
/* clear the context structure first */
memset(&rlan_ctx, 0, sizeof(rlan_ctx));
rlan_ctx.base = ring->dma >> ICE_RLAN_BASE_S;
rlan_ctx.qlen = ring->count;
/* Receive Packet Data Buffer Size.
* The Packet Data Buffer Size is defined in 128 byte units.
*/
rlan_ctx.dbuf = vsi->rx_buf_len >> ICE_RLAN_CTX_DBUF_S;
/* use 32 byte descriptors */
rlan_ctx.dsize = 1;
/* Strip the Ethernet CRC bytes before the packet is posted to host
* memory.
*/
rlan_ctx.crcstrip = 1;
/* L2TSEL flag defines the reported L2 Tags in the receive descriptor */
rlan_ctx.l2tsel = 1;
rlan_ctx.dtype = ICE_RX_DTYPE_NO_SPLIT;
rlan_ctx.hsplit_0 = ICE_RLAN_RX_HSPLIT_0_NO_SPLIT;
rlan_ctx.hsplit_1 = ICE_RLAN_RX_HSPLIT_1_NO_SPLIT;
/* This controls whether VLAN is stripped from inner headers
* The VLAN in the inner L2 header is stripped to the receive
* descriptor if enabled by this flag.
*/
rlan_ctx.showiv = 0;
/* Max packet size for this queue - must not be set to a larger value
* than 5 x DBUF
*/
rlan_ctx.rxmax = min_t(u16, vsi->max_frame,
ICE_MAX_CHAINED_RX_BUFS * vsi->rx_buf_len);
/* Rx queue threshold in units of 64 */
rlan_ctx.lrxqthresh = 1;
/* Enable Flexible Descriptors in the queue context which
* allows this driver to select a specific receive descriptor format
*/
regval = rd32(hw, QRXFLXP_CNTXT(pf_q));
regval |= (rxdid << QRXFLXP_CNTXT_RXDID_IDX_S) &
QRXFLXP_CNTXT_RXDID_IDX_M;
/* increasing context priority to pick up profile id;
* default is 0x01; setting to 0x03 to ensure profile
* is programming if prev context is of same priority
*/
regval |= (0x03 << QRXFLXP_CNTXT_RXDID_PRIO_S) &
QRXFLXP_CNTXT_RXDID_PRIO_M;
wr32(hw, QRXFLXP_CNTXT(pf_q), regval);
/* Absolute queue number out of 2K needs to be passed */
err = ice_write_rxq_ctx(hw, &rlan_ctx, pf_q);
if (err) {
dev_err(&vsi->back->pdev->dev,
"Failed to set LAN Rx queue context for absolute Rx queue %d error: %d\n",
pf_q, err);
return -EIO;
}
/* init queue specific tail register */
ring->tail = hw->hw_addr + QRX_TAIL(pf_q);
writel(0, ring->tail);
ice_alloc_rx_bufs(ring, ICE_DESC_UNUSED(ring));
return 0;
}
/**
* ice_vsi_cfg_rxqs - Configure the VSI for Rx
* @vsi: the VSI being configured
*
* Return 0 on success and a negative value on error
* Configure the Rx VSI for operation.
*/
static int ice_vsi_cfg_rxqs(struct ice_vsi *vsi)
{
int err = 0;
u16 i;
if (vsi->netdev && vsi->netdev->mtu > ETH_DATA_LEN)
vsi->max_frame = vsi->netdev->mtu +
ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
else
vsi->max_frame = ICE_RXBUF_2048;
vsi->rx_buf_len = ICE_RXBUF_2048;
/* set up individual rings */
for (i = 0; i < vsi->num_rxq && !err; i++)
err = ice_setup_rx_ctx(vsi->rx_rings[i]);
if (err) {
dev_err(&vsi->back->pdev->dev, "ice_setup_rx_ctx failed\n");
return -EIO;
}
return err;
}
/**
* ice_vsi_cfg - Setup the VSI
* @vsi: the VSI being configured
......@@ -4232,207 +3919,6 @@ static int ice_vsi_cfg(struct ice_vsi *vsi)
return err;
}
/**
* ice_vsi_stop_tx_rings - Disable Tx rings
* @vsi: the VSI being configured
*/
static int ice_vsi_stop_tx_rings(struct ice_vsi *vsi)
{
struct ice_pf *pf = vsi->back;
struct ice_hw *hw = &pf->hw;
enum ice_status status;
u32 *q_teids, val;
u16 *q_ids, i;
int err = 0;
if (vsi->num_txq > ICE_LAN_TXQ_MAX_QDIS)
return -EINVAL;
q_teids = devm_kcalloc(&pf->pdev->dev, vsi->num_txq, sizeof(*q_teids),
GFP_KERNEL);
if (!q_teids)
return -ENOMEM;
q_ids = devm_kcalloc(&pf->pdev->dev, vsi->num_txq, sizeof(*q_ids),
GFP_KERNEL);
if (!q_ids) {
err = -ENOMEM;
goto err_alloc_q_ids;
}
/* set up the tx queue list to be disabled */
ice_for_each_txq(vsi, i) {
u16 v_idx;
if (!vsi->tx_rings || !vsi->tx_rings[i]) {
err = -EINVAL;
goto err_out;
}
q_ids[i] = vsi->txq_map[i];
q_teids[i] = vsi->tx_rings[i]->txq_teid;
/* clear cause_ena bit for disabled queues */
val = rd32(hw, QINT_TQCTL(vsi->tx_rings[i]->reg_idx));
val &= ~QINT_TQCTL_CAUSE_ENA_M;
wr32(hw, QINT_TQCTL(vsi->tx_rings[i]->reg_idx), val);
/* software is expected to wait for 100 ns */
ndelay(100);
/* trigger a software interrupt for the vector associated to
* the queue to schedule napi handler
*/
v_idx = vsi->tx_rings[i]->q_vector->v_idx;
wr32(hw, GLINT_DYN_CTL(vsi->base_vector + v_idx),
GLINT_DYN_CTL_SWINT_TRIG_M | GLINT_DYN_CTL_INTENA_MSK_M);
}
status = ice_dis_vsi_txq(vsi->port_info, vsi->num_txq, q_ids, q_teids,
NULL);
/* if the disable queue command was exercised during an active reset
* flow, ICE_ERR_RESET_ONGOING is returned. This is not an error as
* the reset operation disables queues at the hardware level anyway.
*/
if (status == ICE_ERR_RESET_ONGOING) {
dev_dbg(&pf->pdev->dev,
"Reset in progress. LAN Tx queues already disabled\n");
} else if (status) {
dev_err(&pf->pdev->dev,
"Failed to disable LAN Tx queues, error: %d\n",
status);
err = -ENODEV;
}
err_out:
devm_kfree(&pf->pdev->dev, q_ids);
err_alloc_q_ids:
devm_kfree(&pf->pdev->dev, q_teids);
return err;
}
/**
* ice_pf_rxq_wait - Wait for a PF's Rx queue to be enabled or disabled
* @pf: the PF being configured
* @pf_q: the PF queue
* @ena: enable or disable state of the queue
*
* This routine will wait for the given Rx queue of the PF to reach the
* enabled or disabled state.
* Returns -ETIMEDOUT in case of failing to reach the requested state after
* multiple retries; else will return 0 in case of success.
*/
static int ice_pf_rxq_wait(struct ice_pf *pf, int pf_q, bool ena)
{
int i;
for (i = 0; i < ICE_Q_WAIT_RETRY_LIMIT; i++) {
u32 rx_reg = rd32(&pf->hw, QRX_CTRL(pf_q));
if (ena == !!(rx_reg & QRX_CTRL_QENA_STAT_M))
break;
usleep_range(10, 20);
}
if (i >= ICE_Q_WAIT_RETRY_LIMIT)
return -ETIMEDOUT;
return 0;
}
/**
* ice_vsi_ctrl_rx_rings - Start or stop a VSI's rx rings
* @vsi: the VSI being configured
* @ena: start or stop the rx rings
*/
static int ice_vsi_ctrl_rx_rings(struct ice_vsi *vsi, bool ena)
{
struct ice_pf *pf = vsi->back;
struct ice_hw *hw = &pf->hw;
int i, j, ret = 0;
for (i = 0; i < vsi->num_rxq; i++) {
int pf_q = vsi->rxq_map[i];
u32 rx_reg;
for (j = 0; j < ICE_Q_WAIT_MAX_RETRY; j++) {
rx_reg = rd32(hw, QRX_CTRL(pf_q));
if (((rx_reg >> QRX_CTRL_QENA_REQ_S) & 1) ==
((rx_reg >> QRX_CTRL_QENA_STAT_S) & 1))
break;
usleep_range(1000, 2000);
}
/* Skip if the queue is already in the requested state */
if (ena == !!(rx_reg & QRX_CTRL_QENA_STAT_M))
continue;
/* turn on/off the queue */
if (ena)
rx_reg |= QRX_CTRL_QENA_REQ_M;
else
rx_reg &= ~QRX_CTRL_QENA_REQ_M;
wr32(hw, QRX_CTRL(pf_q), rx_reg);
/* wait for the change to finish */
ret = ice_pf_rxq_wait(pf, pf_q, ena);
if (ret) {
dev_err(&pf->pdev->dev,
"VSI idx %d Rx ring %d %sable timeout\n",
vsi->idx, pf_q, (ena ? "en" : "dis"));
break;
}
}
return ret;
}
/**
* ice_vsi_start_rx_rings - start VSI's rx rings
* @vsi: the VSI whose rings are to be started
*
* Returns 0 on success and a negative value on error
*/
static int ice_vsi_start_rx_rings(struct ice_vsi *vsi)
{
return ice_vsi_ctrl_rx_rings(vsi, true);
}
/**
* ice_vsi_stop_rx_rings - stop VSI's rx rings
* @vsi: the VSI
*
* Returns 0 on success and a negative value on error
*/
static int ice_vsi_stop_rx_rings(struct ice_vsi *vsi)
{
return ice_vsi_ctrl_rx_rings(vsi, false);
}
/**
* ice_vsi_stop_tx_rx_rings - stop VSI's tx and rx rings
* @vsi: the VSI
* Returns 0 on success and a negative value on error
*/
static int ice_vsi_stop_tx_rx_rings(struct ice_vsi *vsi)
{
int err_tx, err_rx;
err_tx = ice_vsi_stop_tx_rings(vsi);
if (err_tx)
dev_dbg(&vsi->back->pdev->dev, "Failed to disable Tx rings\n");
err_rx = ice_vsi_stop_rx_rings(vsi);
if (err_rx)
dev_dbg(&vsi->back->pdev->dev, "Failed to disable Rx rings\n");
if (err_tx || err_rx)
return -EIO;
return 0;
}
/**
* ice_napi_enable_all - Enable NAPI for all q_vectors in the VSI
* @vsi: the VSI being configured
......@@ -4822,7 +4308,7 @@ static void ice_napi_disable_all(struct ice_vsi *vsi)
*/
int ice_down(struct ice_vsi *vsi)
{
int i, err;
int i, tx_err, rx_err;
/* Caller of this function is expected to set the
* vsi->state __ICE_DOWN bit
......@@ -4833,7 +4319,18 @@ int ice_down(struct ice_vsi *vsi)
}
ice_vsi_dis_irq(vsi);
err = ice_vsi_stop_tx_rx_rings(vsi);
tx_err = ice_vsi_stop_tx_rings(vsi);
if (tx_err)
netdev_err(vsi->netdev,
"Failed stop Tx rings, VSI %d error %d\n",
vsi->vsi_num, tx_err);
rx_err = ice_vsi_stop_rx_rings(vsi);
if (rx_err)
netdev_err(vsi->netdev,
"Failed stop Rx rings, VSI %d error %d\n",
vsi->vsi_num, rx_err);
ice_napi_disable_all(vsi);
ice_for_each_txq(vsi, i)
......@@ -4842,10 +4339,14 @@ int ice_down(struct ice_vsi *vsi)
ice_for_each_rxq(vsi, i)
ice_clean_rx_ring(vsi->rx_rings[i]);
if (err)
netdev_err(vsi->netdev, "Failed to close VSI 0x%04X on switch 0x%04X\n",
if (tx_err || rx_err) {
netdev_err(vsi->netdev,
"Failed to close VSI 0x%04X on switch 0x%04X\n",
vsi->vsi_num, vsi->vsw->sw_id);
return err;
return -EIO;
}
return 0;
}
/**
......@@ -4865,6 +4366,7 @@ static int ice_vsi_setup_tx_rings(struct ice_vsi *vsi)
}
ice_for_each_txq(vsi, i) {
vsi->tx_rings[i]->netdev = vsi->netdev;
err = ice_setup_tx_ring(vsi->tx_rings[i]);
if (err)
break;
......@@ -4890,6 +4392,7 @@ static int ice_vsi_setup_rx_rings(struct ice_vsi *vsi)
}
ice_for_each_rxq(vsi, i) {
vsi->rx_rings[i]->netdev = vsi->netdev;
err = ice_setup_rx_ring(vsi->rx_rings[i]);
if (err)
break;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册